User Exits:Shift wise Operator

Hi Guys,
Anyone knows any enhancement to add customer specific fields in trasanction MF42N .In my client, they have three Shifts. Shifts will vary based on week that means this week may be first shift (say Group AA)then the next week they are moved to second shift.
So in REM I want to confirm shiftwise along with the shift group.
Pls throw some light on this.
Tell me the prodcure ..
Thanks & Regards,
Meena

hi
You have below 3 exits for that tcode.
PTRM0001
SAPLRMPU
XMRM0001
goto SMOD tcode give above name and select component radio button press 'DISPLAY'. you can find FM for . Check with that FM for your requirment.
Reward if it is helpful.
Thanks
Siva kumar

Similar Messages

  • BADI or User Exit validation of operations tab and displaying an error mess

    Hello,
    Could you please let me know the BADI or User Exit validation of operations tab and displaying an error message in iw32
    Thanks,
    Suresh Mgl

    Hi ..
    I tried that user-exit...but i need to block the changes for purchase requisition which is in released stutus..
    .i hope i need to do implicite enchancement spot.....could you please help me to do that..
    Thanks,
    Suresh Mgl

  • User Exit to default operations in IW31

    Hello Everyone,
    I have the following requirements
    1. I need to dafault the Operations in IW31 transaction. I have tried with the following code
    1. I used cmod to open up user exit EXIT_SAPLCOIH_020.
    2. Then i used cmod to open up user exit EXIT_SAPLCOIH_003
    (IWO20001 PM order: User exit to pass routing to order).
    Here in INCLUDE ZXWOCU03, I entered the following code
    IF NOT CAUFVD_IMP-AUART = 'SM03'.
    ( Use above to filter order types and PMActTypes)
    SEL_TAB-PLNTY = 'A'.
    SEL_TAB-PLNNR = 'SAFE_INS'. "***This is the name of the task list
    SEL_TAB-PLNAL = '01'.
    APPEND SEL_TAB.
    ENDIF.
    Using the above code the Operations are getting defaulted even before entering the Maintenance Activity type (PMActType) and Base Start Date. My requirement is i want an User-Exit which fills Operations based on Order Type and Maintenance Activity Type(ILART). 
    2. I also want an User-Exit to change the Control key values in the Operation tab in IW31 transaction.
    Note:The version is 4.6C
    Thanks in advance!
    Regards,
    Sandhya
    Edited by: Sandhyap on Nov 19, 2010 2:56 PM

    Dear Saket Tiwari & Dëv Päträ
    I think I've given you the not clearing impression. i mean that T-Code OLMB is for "Inventory Management and Physical Inventory" configuration. (I think that you already know about it)
    1) Go to T-Code >> OLMB > Physical Inventory > Default Values for Physical Inventory  &
                                 OLMB > Physical Inventory > Field Selection for Physical Inventory
        Pre-settings for entering physical inventory documents
    Reason for inventory difference
         The default value you specify here is only displayed when you enter an inventory difference
         without reference to the corresponding document. But you can also change the default value.
    2) and You can control "Filed selection for Physical Inventory" such as MIGO filed selection.
    I think that before finding Technical Enhancement Spot, You can consider Configuration Control for your process.
    I hope that my options will be helpful for your project.
    Regards,
    Jeong, Yeong-Chul

  • User exit for changing operation scap in PP order

    Hi,
    I want to know user exits for changing operation scrap in PP production order. Please help
    Regards
    Shalini

    I could found only one at the moment...
    QEVA0002  - Calculation of share of scrap in inspection lot            
    check if it is helpful.....else u can go on
    CMOD - Utilities - SAP Enhancements - (Remove Maximum No of fields) - Execute (F8)
    You will get all user exits.
    Now i need points.... :)...My score is not gettin increased... lolz
    kapil

  • User exit for order operation and internal assignment (SAPLCY18)

    Dear all,
    I am currently facing the problem below, which I have posted in PLM forum. However, I have been advised to ask in EAM forum, since probably my problem is more EAM-related.
    The problem currently facing is related to PM order operations. The customer's requirement is to use operations and to include the personnel numbers involved. For this solution, our proposal is to have the operations and within internal operation data to use the tab requirement assignments in order to include the personnel numbers. Also at this level, the client expects to maintain the the 'hr' (work requirements) for each personnel. For example there are used 2 personnel ids with hr requirements of 2hrs and 3 hrs respectively. Let me mention that in the operation screen, the hr requirements are initially defined equal to 1 hr.
    In the above case the message "The work of all the splits is greater than the work in the operation" apperas, since 1hr 5hrs. The question is if there is any way (user exit, badi) to update the work requirements in the operation with the sum of the internal assignment data.
    Program SAPLCY18 may be help, although I have not found the work around.
    More explanatory details to help:
    The combination using Work-Number of capacities-Duration and the Calculation key is already used, however the requirement is to use specific personnel numbers. SAP, as far as I am aware, allows you to define personnel numbers within internal operations.
    TAB Requirements assignements is available as long as in the operations main tab you have completed for the selected line the values Work-Number of capacities-Duration and Calculation key. Thus, in TAB Requirements assignments you can input the personnel numbers and the work of each one.
    The question is if we can use the Requirements Assignments TAB, using the button internal in the operations tab in order to define the personnels involveld and according to the work (hrs) to update the respective field of the operation (otherwise let's say to update the duration field for each personnel id and automatically the operation respective duration field to be updated).
    Your feedback is highly appreciated,
    thank you in advance,
    Bou.Lis

    PeteA,
    thank you for your response. I am actually looking for such a development solution (more-or-less I know that it is not possible using standard SAP customizing) but unfortunately I have not yet found such a user exit or BADI that could help solving the problem facing.
    Do you have any idea of such a development tool to use?
    Thansk and regards,
    Bou.Lis

  • Reg : User Exit for IA05 - Operation Overview

    Hi Team,
    I have a requirement in IA05 in the operation overview we have a field called Std Text field(PLPOD-KTSCH) , Where the user gives the text field in the screen,
    So based on the text key i need to populate  work,duration, in the same screen as attached
    How can i achieve this i mean exit/badi??
    i am trying but i am not getting a suitable one.
    Please help he to crack this.
    Thanks!
    Karthik.S

    EXIT_SAPLCPDA_001 -Customer-Enhancements for Tasklists
    EXIT_SAPLCPDA_002 -Customer-Enhancements for Tasklists
    EXIT_SAPLCPDO_001 -PS: User fields
    EXIT_SAPLCPDO_002 -PS: Customer specific fields in process
    EXIT_SAPLCPDO_003 -PS: Customer specific fields in process
    EXIT_SAPLCPDO_004 -Test units of measure for reference operation set

  • Service Order Operation User exit

    Hi,
    I am looking for user exit to validate operation data in sevice order on entry and while saving.
    I have checked IW01 user exits but enable to find the correct one.

    > Hi,
    >
    > I am looking for user exit to validate operation data
    > in sevice order on entry and while saving.
    >
    > I have checked IW01 user exits but enable to find the
    > correct one.
    Hi,
    This is my first post. I think you can also use function EXIT_SAPLCOIH_009. This is fired on any of maintenance order/service order save event.
    Regards,
    Abhijit

  • USER-EXIT EXAMPLE

    Hi all,
            I'm completely unaware of user-exit and badi. Can anyone can explain me exactly these two concepts with realtime examples.... i want expalnation with some examples. Kindly help in this regards,
    With thanks,
    karthi.

    Hi subramanian karthi  ,
    User exits :
    1. Introduction:
    User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
    The naming standard of function modules for functionmodule exits is: 
    EXIT_
    Example:
    The program for transaction VA01 Create salesorder is SAPMV45A
    If you search for CALL CUSTOMER-FUNCTION i program
    SAPMV45A you will find ( Among other user exits):
    CALL CUSTOMER-FUNCTION '003'
      exporting
        xvbak   = vbak
        xvbuk   = vbuk
        xkomk   = tkomk
      importing
        lvf_subrc = lvf_subrc
      tables
        xvbfa = xvbfa
        xvbap = xvbap
        xvbup = xvbup.
    The exit calls function module EXIT_SAPMV45A_003
    You will now come to a screen that shows the function module exits for the exit.
    3. Using Project management of SAP Enhancements, we want to create a project to enahance trasnaction VA01 .
    - Go to transaction CMOD
    - Create a project called ZVA01
    - Choose the Enhancement assign radio button and press the Change button
    In the first column enter V45A0002 Predefine sold-to party in sales document. 
    Note that an enhancement can only be used in 1 project. If the enhancement is already in use, and error message will be displayed
    Press Save
    Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
    Now the function module is displayed. Double click on include ZXVVAU04 in the function module
    Insert the following code into the include: E_KUNNR = '2155'.
    Activate the include program. Go back to CMOD and activate the project. 
    Goto transaction VA01 and craete a salesorder. 
    Note that Sold-to-party now automatically is "2155"
    User exit - A user exit is a three character code that instructs the system to access a program during system processing.
    SXX: S is for standard exits that are delivered by SAP.   XX represents the 2-digit exit number.
    UXX: U is for user exits that are defined by the user.  XX represents the 2-digit exit number
    An example of a user exits :-
    MODULE user_exit_0001 INPUT 
        CASE okcode.
            WHEN 'BACK OR EXIT'.
                CASE sy-dynnr.
                        WHEN '100'.
                             SET SCREEN 0.
                             LEAVE SCREEN.
                        WHEN '200'.
    Note that you can write any code that satisfy your needs.                                                     ****
    But in this case, this was wrote as a sample code for reference sake.                                    ****
    And you can test it.                                                                                ****
                             SET SCREEN 100.
                             LEAVE SCREEN.
                 ENDCASE.
          ENDCASE. 
    Finding User Exits
    Procdedure 1:
    Valid up to at least SAP release 4.0B
    One way to find user exits applicable for a given SAP screen. From the SE38 screen, enter the desired screen main program, and click Utilities > Find In Source Code, and "CUSTOMER-FUNCTION" as the text to search for. This will give you a list of the user exits and where they are called from for all screens in the module pool.
    Note: format of ABAP statement is CALL CUSTOMER-FUNCTION '009', for example. This is the statement called by a submodule attached to the main program.
    Actual related function is EXIT_SAPLCOIH_009, for example. This example refers to customer function 9 in main program SAPLCOIH. Not all user exit functions are names as such, but this is the usual format.
    If you are doing data validation and want to set an error message with a field open, you must be sure that the user exit you are using is linked to a calling module in the PAI section of the screen and the field you wish to be open was in the CHAIN statement which caused the PAI module to be invoked.
    If you use a customer function which was invoked by a PBO module to validate data, the "MESSAGE" statement will cause the screen to return with the desired message at the bottom, but with all screen fields closed for input.
    When you make changes to the include module for a given customer function, you must regenerate the related function group before you will see the changes included in the screen behaviour.
    Procdedure 2:
    Need to find user exits module-wise? Suppose we want to see the available sales module user exits. Go to transaction SE81. Click on SD, then click "edit" on the menu bar and choose select subtree. Click on "information system," Open Environment node, customer exits, and enhancements. Press F8 to get all the user exits for that module. In brief: SE81->SD->Select subtree->Information System->Envir->Exit Techniques->Customers exits->enhancements->Execute(F8)
    Procedure 3:
    Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
    If you know the Exit name, go to transaction CMOD.
    Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter.
    USER EXIT  (SAP Enhancement)
    http://www.planetsap.com/userexit_det_1.htm
    List of all USER EXIT's  (4.6c version)
    http://www.planetsap.com/Userexit_List.htm
    User Exits in FI/CO
    http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
    Excellent web-site for user-exits
    http://www.abaptalk.com/forum_posts.asp?TID=31&SID=3b18fa1dc8b7b9a1dbdedf36fe3bc2az&PID=56#56
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/208811b0-00b2-2910-c5ac-dd2c7c50c8e8
    Enhancements,Creating a project,Assigning SAP enhancements to a project,Editing enhancement components,Activating a project
    http://www.planetsap.com/userexit_main_page.htm
    Find user exits with a TCode
    http://www.erpgenie.com/abap/code/abap26.htm
    SAP User Exits Routine
    http://www.sap-basis-abap.com/sapab013.htm
    User Exit and Enhancement explained in detail .
    http://sap.niraj.tripod.com/id21.html
    Excellent web-site for user-exits
    http://www.abaptalk.com/forum_posts.asp?TID=31&SID=3b18fa1dc8b7b9a1dbdedf36fe3bc2az&PID=56#56
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/208811b0-00b2-2910-c5ac-dd2c7c50c8e8
    http://abap4.tripod.com/Other_Useful_Tips.html
    BAdis:
    These steps should enable you to find any BADI related to any transaction in a matter of minutes.
    Procedure 1:
    1) Go to the transaction SE37 to find your function module.
    2) Locate the function SXV_GET_CLIF_BY_NAME.
    3) Put a breakpoint there.
    4) Now open a new session.
    5) Go to your transaction. 6) At that time, it will stop this function.
    7) Double click on the function field EXIT_NAME.
    8) That will give you name of the BADI that is provided in your transaction.
    Business Add-Ins
    Procedure 2:
    1) Goto se24 (Display class cl_exithandler)
    2) Double click on the method GET_INSTANCE.
    3) Put a break point at Line no.25 (CASE sy-subrc).
    4) Now Execute SAP standard transaction
    5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
    6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
    7) This way you will find all the BADIs called on click of any button in any transaction
    SAP Business Add-Ins (BAdIs) are one of the most important technologies used to adapt SAP software to specific requirements. BAdIs were introduced with Release 4.6 and replace function module exits. This technology is not limited to SAP applications. BAdI calls can be integrated in customer applications. These can then be enhanced by other customer applications. In the various SAP applications, BAdI calls are implemented at places where enhancements are appropriate.Business add-ins are enhancements to the standard version of the system. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
    As with customer exits, two different views are available:
    · In the definition view, an application programmer defines exit points in a source that allow specific industry sectors, partners, and customers to attach additional coding to standard SAP source code, without having to modify the original object.
    · In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard solution, if one is available.
    In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, country-specific versions, industry solutions, partner, customer, and so on). You can create definitions and implementations of Business Add-Ins at any level of the system landscape.SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
    The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to differentiate between Add-In implementations using the filter Country or other criteria.
    The enhancement technique is set up in such a way that it is possible to define interfaces for ABAP soure code, screens, GUI interfaces, and tables. These allow customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
    BADI is just an object-oriented version of user-exit. Instead of entering program code into some function module (as in customer-exit), you define some class which has to implement predefined methods and those methods are fired at predefined points just like an old user-exit. Some BADI can have multiple independent implementations which is much better for software deployment as several developers can implement the same BADI independently. BADI/UserExists are used to enhance R/3 For customer Needs.
    Actually there is no transaction to find when and where the BADI
    is called.
    1. You can see the BADI description to find why it is called.
    2. Once you implemented and activated the BADI, put some break points
    in the BADI and see "where else used" option to check in what all
    programs this BADI is called. In the ITS debug, when you are doing
    the operation what exactly the BADI description tells, it will take
    to the break points and you have to do manually debug the whole thing.
    I know its bit difficult to do manual debug the whole thing, it
    takes lot of time, but you have to be very patience when you are
    dealing with BADI's.
    Transaction SE18 is the BADI equivalent of transaction SMOD
    Transaction SE19 is the BADI equivalent of transaction CMOD .
    To find the BADI to be implemented and then implement this via SE19.
    Check this blogs 2 find a BADI:
    How To Define a New BAdI Within the Enhancement Framework (Some Basics About the BAdI,BAdI Commands in ABAP,
    When to Use a BAdI?)
    /people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
    How to implement a BAdI And How to Use a Filter
    /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
    Introducing Business Add-Ins
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f3202186-0601-0010-6591-b832b1a0d0de
    How to implement BAdi in Enhancement Framework
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb99702
    Business Add-Ins
    http://help.sap.com/saphelp_47x200/helpdata/en/ee/a1d548892b11d295d60000e82de14a/frameset.htm
    BAdI: Customer-Defined Functions in the Formula Builder
    http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
    Difference Between BADI and User Exits
    http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
    To Use BADI - Business Add In you need to Understand ABAP OO Interface Concept
    http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
    cheers!
    gyanaraj
    ****Pls reward points if u find this helpful

  • User exit: save PM order

    Dear all,
    I'm looking for an user exit that will be actived during order save. However, it seems most exits just for check, I can not change any data.
    The requirement is: if user save certain order, then field function area 'CAUFVD-FUNC_AREA' is filled automatically. This fiels in the order header.
    Thanks,
    Ben

    Hi,
    Orders     
    User Exits     BBPK0001
    Description     Exit for determining the external procurement profile
    User Exits     CNEX0013
    Description     Default item category for component assignment
    User Exits     CNEX0026
    Description     Customer enhancement for general inspection of material
    User Exits     CNEX0027
    Description     Customer enhancement: Plant, storage loc. finding for comp.
    User Exits     CNEX0037
    Description     Check new component
    User Exits     COCCA002
    Description     Customer Functions for Organizational Authorization Checks (SETTLEMENT)
    User Exits     COI20001
    Description     Changing of person found
    User Exits     COI20002
    Description     Alternative procurement of HR availability data
    User Exits     COOM0001
    Description     Customer Functions for Overhead Percentages
    User Exits     COOPA_01
    Description     Customer check modules for internal orders
    User Exits     COOPA002
    Description     Customer function for master data maintenance - internal orders
    User Exits     COOPA003
    Description     User-Defined Fields in the Order Master
    User Exits     COOPA004
    Description     Customer function: Print order master data
    User Exits     COPCP005 (see: 1, )
    Description     Material Costing: User exit for material valuation (strategy U)
    User Exits     CY190001
    Description     Capacity Planning: Change order operation
    User Exits     COZF0001
    Description     Change purchase req. for externally processed operation
    User Exits     COZF0002
    Description     Change purchase req. for externally procured component
    User Exits     CYPP0001
    Description     Change sequence criteria and sequencing
    User Exits     ICSV0001
    Description     Display of geographic location data
    User Exits     ICSV0002
    Description     Automatic task determination for service notifications
    User Exits     ICSV0003
    Description     Partner selection
    User Exits     ICSV0004
    Description     Check PM object and display object information
    User Exits     ICSV0005
    Description     Determining reason for rejection - resource-related billing
    User Exits     ICSV0008
    Description     Validation of additional partner types
    User Exits     IWMI0001
    Description     User exits for SM/PM IDOCs
    User Exits     IWO10001
    Description     Create a PM sub-order
    User Exits     IWO10002
    Description     Customer check for order release
    User Exits     IWO10004
    Description     Customer check for order completion
    User Exits     IWO10005
    Description     Customer specific determination of profit centre
    User Exits     IWO10006
    Description     FCode exclusion through customer enhancement
    User Exits     IWO10007
    Description     Customer enhancement - permits in the order
    User Exits     IWO10008
    Description     Customer enhancement: Determination of tax jurisdiction code
    User Exits     IWO10009
    Description     Customer Check for 'Save' Event
    User Exits     IWO10010
    Description     Customer enhancement for determining WBS element
    User Exits     IWO10011
    Description     Customer enhancement for component selection
    User Exits     IWO10012
    Description     Priority handling on central header
    User Exits     IWO10015
    Description     F4 Help for user fields on operation
    User Exits     IWO10016
    Description     Customer enhancement to check operation user fields
    User Exits     IWO10017
    Description     Determine external order number by customer logic
    User Exits     IWO10018
    Description     User fields on order header
    User Exits     IWO10020
    Description     Automatically include task list
    User Exits     IWO10021
    Description     Automatic task list transfer when creating order from notification
    User Exits     IWO10022
    Description     Determine calendar from user exit
    User Exits     IWO10023
    Description     Service order: Change header data for advance shipment document
    User Exits     IWO10024
    Description     Service order: Changes to items for advance shipment
    User Exits     IWO10025
    Description     Finding responsible cost centre
    User Exits     IWO10026
    Description     User check on setting status 'Do not perform'
    User Exits     IWO10027
    Description     User exit: Generate user-defined settlement rule
    User Exits     IWO10029
    Description     Inclusion of bill of material in PM/SM order
    User Exits     IWO10030
    Description     Predefining the fields for the profitability segment
    User Exits     IWO10031
    Description     Hide personnel number in PM/SM order
    User Exits     IWO10033
    Description     Customer-Specific Authorization Check PM/CS Order
    User Exits     IWO10034
    Description     Operation status based on the status of capacity requirements
    User Exits     IWO20001
    Description     User exit to pass routing/task list to order
    User Exits     IWOC0003
    Description     PM/SM authorization check of ref. object and planner group
    User Exits     M06B0002
    Description     Change communication structure for purchase requisition release
    User Exits     MGA00003
    Description     Material Master (Industry and Retail): Number Display
    User Exits     PPCO0001
    Description     Application development: PP orders
    User Exits     PPCO0005
    Description     Storage location/backflushing when order is created
    User Exits     PPCO0023
    Description     Checks changes to components
    regards,
    Venkatesan Anandan

  • Pls clarify me - gap analysis & user exits

    What are the gaps in your project ( give me 2 examples - real time for this) and how do  u fill the gap in ur project (where do we fill modifications in gap analysis, i mean in which stage we prep documents for gap analysis)
    userexit_number_range- mv45afzz (user exit to create alternate number range for sales doc type,sales org and doc category) we can assign internal no range/external to the sales doc type then what is theuse with this ?
    userexit_save_document_prepare - what is the role of this user exit and why it is used
    quick responders willl be definitely rewarded
    thanks

    Hi Kishore.,
           Gaps are nothing but cracks in SAP, we doccument the cracks or gaps in blueprint Phase and prepare the gap doccumentation,
    Some of the gaps are Legacy filed customer number should be iin Customer master data,We can add filed with the help of user exit
    Like wise when we enter in to sales order VA01,In the sold to party column we should find the customer Automatically with out manual entry,For this also we use the User Exit
    REWARD if helpfull
    Thanks & Regards
    Narayana

  • User Exit or BADI for Operation tab of IW32 Transaction

    Hi All,
    Currently I am working on the transaction IW32. I am looking for a user exit or BADI which can trace the item level changed data for operations.
    Thanks in advance.
    Regards,
    Rajesh

    hi,
    User Exit IWO10012.
    BADi's
    IWO1_ORDER_BADI
    IWO1_PREQ_BADI
    IWO1_SCREEN_MODIFY
    Hope this helps
    Regards,
    Shashank

  • User Exit that triggers for Change operation

    Hi All..
    I want a user exit which triggers when I enter into an infotype(2001) from tcode PA30.
    My actual requirement is to show the field REFNR in display mode.
    By using the exit PBAS0001 exit0001 I can make the field REFNR in displaymode for create operation.
    But in change operation of the infotype the exit is not getting triggered.
    Regards,
    Anji.

    chk these
    Transaction Code - PA30                     Maintain HR Master Data
    Enhancement/ Business Add-in            Description
    Enhancement
    PBASRP01                                PA: User exit distributed reporting
    PBAS0002                                PA: Enhancements for Personnel Administration - Menu
    PBAS0001                                PA: Pers.Admin./Recruitment: Default values and checks
    PARA0002                                Enhancement for Calculating Annual Salary; IT0008,14,15
    PARA0001                                Enhancement for Determining the Number of Periods
    HRRPAI01                                User exit for FB HR_ENTRY_DATE and HR_LEAVING_DATE
    HRPC0001                                HR: PC download authorization
    HRPBAS01                                User Exit for HR Master Data
      Business Add-in
    HRPAD00_PREM                            Definition of User Exit for Collective Search Help PREM
    HRPADUS_PBAS_0001                       Customer Exit for Message handling
    HRPAD_SUBTY_CHECK
    HR_F4_GET_SUBTYPE                       HR: Entry help for subtypes
    HR_FAST_ACTION_CHECK                    Check fields on the fast entry screen
    HR_INDVAL                               HR: Indirect wage type valuation
    HR_SET_PKGAB
    HRPAD00_RECOG_SCREEN                    Employee - Recognition Screen
    HRPAYXX_DELETE_PERNR                    BAdI for Reports Deleting Personnel Numbers
    HRPAD00_PAPM                            Definition of User Exit for Collective Search Help PAPM
    HRPAD00_GET_AF_0008                     Additional Fields for Basic Pay Infotype (0008)
    HRPAD00_ENTRY_LEAVE                     HR_ENTRY_DATE and HR_LEAVING_DATE
    HRPAD00_ADRS                            HR: Address formatting
    HRPAD00MGEACTIVATION                    Activation Action BAdI for Global Employees
    HRPAD00INFTY                            Update / Infotype maintenance
    HRPAD00AUTH_TIME                        Time Logic in the PA Authorization Check
    HRPAD00AUTH_RECORD                      Spanish Data Privacy Law: Exit for Recording
    HRPAD00AUTH_CHECK                       HR: Authorization Check
    HRIV_REDUCE_AMOUNT                      Reduction within Indirect Valuation

  • Plant Maintenance Order - BADi/user exit for operation change

    I need to send a mail on plant maintenance order (IW32) save event if there is any change in operation - requirement assignment person. Means if the operation is assigned to a person then notify that person on order save event.
    Can anybody help me on this in finding some BADi or user exit?
    Thanks in advance.

    Hi,
    User Exits:-
    IWO10009  Customer Check for 'Save' Event
    BAdI:-
    ALM_ME_001_ORDER      Order/Operation Data
    ALM_ME_ORDER_OPER   MAM 1.0 Order Operations
    IBAPI_ALM_OPR_GETDET BADI for Reading Fields for BAPI_ALM_OPERATION_GET_DETAIL
    Check with these User Exits & BAdI's.
    regards,
    Venkatesan Anandan

  • User exit for Service order release ( needed operation details as import )

    Hi All,
       I need a user-exit while service order release( tcode : IW31 ) activity . I find some of the exits, but none of those not having "Operation" details , all are having only header details. Please suggest if any user-exit is available for this or BADI . I tried with badi "ALM_ME_001_ORDER" , its not triggering at all while creation of service order.
       Is there any way we can get from operation data from buffer, please suggest me the same.
    Thanks in advance,
    Pavan.

    Hi Thomas,
       Thanks for reply. I saw the function exit which you mentioned , but it didn't have the operation details in import.
    Regards,
    Pavan

  • User Exit in ECC 3.1 i  for operation overview

    Hi dears,
                 In 3.1i system, Is there any user exit to add one more field in the operation overview tab of  order ?
    Regards,
    M.Alagesan

    Thanks pete
        It is a table view not a tab
        Is it possible to add a field in the header screen of the order  in 3.1i
        In that field i want to append short text key and room in functional location
        Ex: TI  - short text key
              A001 - room in functional location
             Output  should be TI A001

Maybe you are looking for