User Group is not receiving email Sharepoint 2013 & Nintex workflow

Hi I created circular workflow using nintex and sharepoint 2013 , now problem occur that User group did not receive email notification through web portal , sending individual email address working fine but user group is not receiving
any email, not a single group is working now , to clear we used same workflow since last two years and all group received email earlier but now we are facing this issue since last 3 weeks. to resolve this we create new test groups and test but enable
to send.
looking for support to resolve this issue
Regards

This actually sounds like a problem that should be discussed on the Nintex forums, can you try over there?
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Similar Messages

  • Exchange 2013, a distribution group within a distribution group is not receiving emails.

    Here's the explanation of what's going on:
    "A" is an internal distribution group containing other internal contacts, and internal distribution groups "B" and "C". "B" is a working distribution group that contains all internal contacts. "C" contains all
    external contacts, who will successfully receive emails sent directly to "C". The problem is, when you send an email to "A", everyone in "B" receives the email, but no one in "C" does. "C" is set to receive
    emails from external sources and has correct SMTP settings as far as I can tell.
    Is this problem related to the fact that "C" is full of external contacts? Is there a setting I'm missing somewhere that will allow "C" to receive emails sent to "A"?
    Edit: Group "C" can not receive emails at all.

    Sorry, i meant does the mailbox you are sending the email FROM have permission to send emails TO external email address?
    Our exchange server is set up so that certain people can only email internal addresses. This is configured in the ECP under Mail Flow - Rules, and is basically configured to state that anyone within the AD group "internal only" to reject the message and
    provide the explanation "you are not allowed to email externally".
    If the mailbox you are sending the mail from is not permitted to email external contacts, it wont work.
    It can be tested by emailing one of the addresses in Group C individually.

  • Not Receiving Email Notifications via Hyperion Workflow Process

    Hi All,
    Configuring SMTP for workflow process in Hyperion planning.
    I did the following steps for the above process.
    1--> I checked whether SMTP server is running or not using Telnet command in the machine where the application is running-->*[Its working fine]*
    2-->Then I logged in to planning application with admin credentials and set the Email server details as follows
    2.a) *[Planning-->Administration-->Application-->Settings-->I entered the Email server details]*
    2.b) *[Planning-->File-->Preferences-->Planning-->I mentioned the Email address for administrator]*
    3--> I created several users using shared services console and I set the security Access type as Descendents Inclusive for each and every dimensions.
    4--> I set the Email address for every users which are created in the above step *[Planning-->File-->Preferences-->Planning]*
    5--> I created a Planning unit Hierarchy.
    6-->I logged as a Planner and I entered the budget in the Data form .
    7-->I promoted this budget to the Higher official for verification process.
    8-->But I didn't get the status mail for the above process.
    Kindly guide me whether I am following the right procedure to config SMTP in my application.
    How to get the status of the notification mail through relational tables.
    Kindly mention the location of log files regarding this issue.
    Please guide me to overcome this issue.
    Thanks and regards
    Sai

    Hi John,
    Thanks for your reply. I couldn't get you from the below quote
    Does you SMTP server accept anonymous connections?
    Anonymous in the sense that you mean like Unauthenticated connection. Yes my mail server is unauthenticated server, hence it doesn't require any username and password.
    Regards,
    Sai

  • User not receiving email / corrupt database?

    Much like another recent post, I have a user that can not receive email the emails just sit in the queue.
    The error on those messages is "[[email protected]]: temporary failure"
    Here are the twists:
    1) We had a power spike a couple of days ago. The user's UPS failed and his machine lost power completely. He rebooted and everything else was fine, but he has not received an e-mail since then.
    2) When looking at the list of users on the Server Admin > Mail > Maintenance > Accounts screen, the list in the database stops at the person BEFORE this particular user. They're alphabetical, obviously, so everyone after this person are not listed at all - 13 total missing accounts.
    The kicker is that the rest of us are still receiving e-mail normally!
    Thoughts?!
    Details:
    Mac Xserve running 10.4.11
    Dual 2GHz, and 2GB RAM
    Keep in mind I am NOT a born tech person, have a mild to moderate comfort level with a command-line prompt, and no native intuition for any of this.
    Thanks!
    -Rita

    I'm the consultant that fixed MNX04's server, but it took several attempts.
    the Cyrus reconstruct command failed to resolve the issue, and even removing the user using cyradm, and re-creating them in Workgroup manager didn't fix the problem.
    Pterobyte's mailbfr utility did the trick: mailbfr -f, wait awhile for the repair to run, and all was well.
    I'm grateful for all the help pterobyte has given to people on this forum, but it concerns me a little bit that the Cyrus utilities built in to OS X server can't fix this sort of problem. (However, this is the first time I've run into a problem with OS X mail servers that the Cyrus reconstruct command couldn't fix.)

  • User not receiving Email

    I have a user that can not receive email the emails just sit in the queue.
    The error I see is DBERROR: error fetching user.user: cyrusdb error
    I have ran mailbfr -m twice and restarted the server with no success.
    What is the next step.

    The next step would be to reconstruct the entire cyrus database using mailbfr -f
    It will take a while and you will loose read/unread flags.

  • Users are not receiving Email Receipts

    Hello,
    Our issues seem similar with previous discussions regarding email receipts. We have 2 types of users: Those who submit their own data, and those who submit data on behalf of others. Both user types are inconsistently receiving email receipts. For example, a user submitted data on behalf of 10 individuals, but only received email receipts for 5 of those individuals. We have been unable to determine why this person would only receive some of the receipts, and not all. We have verified the emails are not in a trash or spam folder, and we have also verified the forms were completed and submitted.
    Below is an attached screenshot with our Email Receipt setup. Thank you for your time.

    Hi Lucia,
    The user who is submitting information on behalf of other users is only entering their email address once. For example, this user submitted data for 5 people within a 20 minute timespan and received email receipts for all 5 submissions (she is using her email address as the email address of record). She then submitted data for another 5 people in the following 15 minutes and did not receive a single email receipt. There is no difference in the data submitted; she should have received email receipts for all 10 individuals.
    There is also the issue of those who submit their own data and do not receive email receipts.
    Thank you.

  • User not receiving emails regarding approval notifications

    Hi,
    SRM system has been upgraded to 5.0.
    User is not receiving emails regarding Approval notifications. However, the user is able to view the SCs pending for his approval in his approval list.
    I checked the transmission of the emails, the approval notifications are sucessfuly sent and the email of the user is correctly maintained. I tried resending the emails, and the user didnt receive emails even then.
    Could be please advice what could the error.
    Thanks
    Hemanth

    Hello Hemanth Kumar,
    If approval mail:
    - is correctly generated,
    - you can see it in SOST transaction,
    - request status in SOST is OK,
    this means SAPconnect is working fine, so your problem does not come from SAP.
    You have to check your STMP gateaway and your mail server.
    Regards.
    Laurent.

  • Exchange 2013 not receiving emails above 10MB even though MessageReceive Size has been configured

    Exchange 2013 not receiving emails above 10MB even though MessageReceive Size has been configured.
    [PS] C:\Windows\system32>Get-TransportConfig
    AddressBookPolicyRoutingEnabled                             : False
    AnonymousSenderToRecipientRatePerHour                : 1800
    ClearCategories                                            
    : True
    ConvertDisclaimerWrapperToEml                               : False
    DSNConversionMode                                          
    : UseExchangeDSNs
    ExternalDelayDsnEnabled                                     : True
    ExternalDsnDefaultLanguage                                  :
    ExternalDsnLanguageDetectionEnabled                         : True
    ExternalDsnMaxMessageAttachSize                             : 10 MB (10,485,760 bytes)
    ExternalDsnReportingAuthority                               :
    ExternalDsnSendHtml                                        
    : True
    ExternalPostmasterAddress                                   : [email protected]
    GenerateCopyOfDSNFor                                        :
    HygieneSuite                                               
    : Standard
    InternalDelayDsnEnabled                                     : True
    InternalDsnDefaultLanguage                                  :
    InternalDsnLanguageDetectionEnabled                         : True
    InternalDsnMaxMessageAttachSize                             : 10 MB (10,485,760 bytes)
    InternalDsnReportingAuthority                               :
    InternalDsnSendHtml                                        
    : True
    InternalSMTPServers                                        
    : {127.0.0.1}
    JournalingReportNdrTo                                       : <>
    LegacyJournalingMigrationEnabled                            : False
    LegacyArchiveJournalingEnabled                              : False
    LegacyArchiveLiveJournalingEnabled                          : False
    RedirectUnprovisionedUserMessagesForLegacyArchiveJournaling : False
    RedirectDLMessagesForLegacyArchiveJournaling                : False
    MaxDumpsterSizePerDatabase                                  : 18 MB (18,874,368 bytes)
    MaxDumpsterTime                                            
    : 7.00:00:00
    MaxReceiveSize                                             
    : 50 MB (52,428,800 bytes)
    MaxRecipientEnvelopeLimit                                   : 5000
    MaxRetriesForLocalSiteShadow                                : 2
    MaxRetriesForRemoteSiteShadow                               : 4
    MaxSendSize                                                
    : 20 MB (20,971,520 bytes)
    MigrationEnabled                                           
    : False
    OpenDomainRoutingEnabled                                    : False
    RejectMessageOnShadowFailure                                : False
    Rfc2231EncodingEnabled                                      : False
    SafetyNetHoldTime                                          
    : 2.00:00:00
    ShadowHeartbeatFrequency                                    : 00:02:00
    ShadowMessageAutoDiscardInterval                            : 2.00:00:00
    ShadowMessagePreferenceSetting                              : PreferRemote
    ShadowRedundancyEnabled                                     : True
    ShadowResubmitTimeSpan                                      : 03:00:00
    SupervisionTags                                            
    : {Reject, Allow}
    TLSReceiveDomainSecureList                                  : {}
    TLSSendDomainSecureList                                     : {}
    VerifySecureSubmitEnabled                                   : False
    VoicemailJournalingEnabled                                  : True
    HeaderPromotionModeSetting                                  : NoCreate
    Xexch50Enabled                                             
    : True

    hi stephan... lets put in this way... are you sending attachment ...did you checked the max attachment size as mail send size and attachment size are two different things.. please check this for info on different size creteria
    http://technet.microsoft.com/en-us/library/bb124345%28v=exchg.150%29.aspx
    can you please share the output of below three commands... i doubt your receive connector is not configured properly.
    Get-TransportConfig | Format-List -Property MaxReceiveSize, MaxSendSize
    Get-SendConnector | Format-List -Property Identity, MaxMessageSize
    Get-ReceiveConnector | Format-List -Property Identity, MaxMessageSize
    you can also check this link which gives a perfect info on how exchange works for email size... http://rajisubramanian.wordpress.com/2014/01/26/exchange-server-2013-message-size-configuration-detail/
    Mark as useful or answered if my replies helped you solving your query.
    Thanks, Happiness Always
    Jatin
    Skype: jatider2jatin, Email: [email protected]

  • Document library is not receiving emails

    Dear all,
    my document library is not receiving email. For the last 2 months only this is not working.
    I had followed the following link for the configuration of the setup - initially
    http://technet.microsoft.com/en-us/library/cc287879%28v=office.14%29.aspx
    I had checked the ULS log. Didn't find major ones. i have seen like this The Incoming E-Mail service has completed a batch.
    Can anyone give input to solve
    Cheers
    sathya

    Check if any thing changed since it was working. something like permission or update
    Does the app pool account has access to pick-up \ drop folder
    How is IIS SMTP configured
    restarted SMTP service
    Do you see
    E-mail cannot be delivered because site is over quota or locked for editing. Site URL:
    http://YourSiteURL.
    Go to the SharePoint Central Administration > Application Management > Configure quotas and locks > on the Site Quota Information section >  set a limit (i.e: 5000 MB) on this setting:  “Limit site storage to a maximum of:”  >
    and then press “OK”.
    http://sharepoint.stackexchange.com/questions/62365/sharepoint-incoming-email-not-working
    It's not working because SharePoint adds a header to the email message called X-Mailer: SharePoint Foundation 2010, and the incoming email feature will not accept emails with that header. This is apparently by design.
    To make it work I will have to write some custom code to either take the X-Mailer header out of the email messages while they're waiting in the drop folder, OR add it to the InfoPath form's code-behind to use a System.Net.Mail method to send the form data
    instead of the standard email submit option.
    http://webcache.googleusercontent.com/search?q=cache:n2_iOqwNzmcJ:turismon-sp.blogspot.com/2013/07/incoming-e-mail-does-not-pickup-e-mail.html+&cd=4&hl=en&ct=clnk&gl=in&client=firefox-beta
    If this helped you resolve your issue, please mark it Answered

  • Can not receive emails from third party email accounts

    Recently I started working for a small business which has small business server 2011 and exchange 2010 installed. Before I started there were eight user accounts and they all have unlimited email access. I created a few users through sbs AD and also from
    exchange console a week ago. Unfortunately none of them can not receive emails from third party accounts. they all can receive internal emails and also can send mails to any email accounts internally and externally. 
    This is a night mare for me as new users are having trouble with communicating via mails. I have tried all the methods and now thought of posting this issue on tech net. Please help me on this!!
    Thanks a lot!! 
    Sammy 

    Checklist for testing inbound email problems, I am assuming outbound emails works ok.
    1. Check Port 25 forwarding on all modems routers/firewalls
    2. MX Record is created and pointing to the correct Public IP Address, use MXToolbox.com to verify MX Record and test SMTP flow. Also Verify your public IP has not changed, use whatsmyip.org to check you public IP
    3. If using POP Connector Service, make sure POP accounts are created properly
    4. If using a 3rd party spam host, make sure they forward email to correct public IP address, use step 2 to verify your public IP.

  • Task Assignment to Ggroup - Group Members Not Getting Email

    I have a process with an approval activity with initial user selection set to a group rather than a specific user. I want all selected users to receive an email notification that a new task awaits them. When I assign to a specific user, the custom email template is sent to the user. When I assign to a group, the group members don't get the task assignment email.
    How do I change that so that group members will receive email notification of task assignment?
    Thanks in advance!
    Eric

    One possible solution:
    You can use our Group Lookup component to get a comma-separated list of the emails of the members of the group. Then, in the step before the User>assignTask step, send the group an email. The only problem is that you won't be able to embed a link directly to the task, because the task doesn't exist yet.
    Doc: http://avoka.dnsalias.com/confluence/display/Public/Lookup+DSC
    Download: http://www.avoka.com/avoka/escomponents.shtml
    To work around this problem, you can use the technique outlined here:
    http://blogs.avoka.com/2008/10/20/customize-user-task-escalation-after-assignment/
    http://avoka.dnsalias.com/confluence/display/Public/Customize+User+Task+Escalation+After+A ssignment
    If you need more assistance, contact info-at-avoka.com
    Howard

  • HT3376 I am not receiving emails in my Mail account.  However, I am receiving them on my web based yahoo account and on my ipad.  The other strange thing is that on my Mac, I have been receiving emails from Apple.  How can i fix this problem?

    I am not receiving email messages in my Mail account on my Mac OSX.  However, emails are being received on my ipad and my yahoo web site.  Also, all emails from Apple are going through in my Mail account.  How do I fix this problem?

    Well, the other person said theirs was working now. On yours let's try this...
    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup),  it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
    /Users/YourUserName/Library/Mail/MessageRules.plist
    /Users/YourUserName/Library/Mail/MessageRules.plist.backup
    Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

  • Not receiving email? Check your modem/router!!!

    Hi all. My Logoc board fried last week and server/mail server was offline for that time. Everything worked up to that point. When I got the server back from the genious bar with a new logic board mail and web refused to work. I could send email and surf the web but could not receive email or visit my website from outside my subnet. After 3 three days of checking and tweaking everything from D.N.S> to mail settings, firewall settings I decided to check my Modem. It is a 2wire 2701HGB. What I saw astounded me. All the firewall settings That had allowed the incoming connections no longer had the public I.P. back to my server. It had deleted it, on its own. So if you have has a similar problem check your modem. It could save you a lot of grief. Everything works just like it used to now.
    Best,
    emackiii

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
    If you aren't receiving the email to your rescue email account (and you've checked the spam folder on the account as well as the inbox, and tried clicking the reset link again) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699

  • Not receiving email with ETP.DAT file

    I have two users that are not receiving the email from the blackberry.net domain that has the ETP.DAT file attached. I set a new activation password on my blackberry and received the email. I have tried activating these guys a dozen time. I deleted them from the BES and re-entered their BES profile still nothing. I am only having problems with these two. When I activated myself I was able to trace the email through our SMTP Server right to my mail box. We are a Lotus Notes camp. Can anyone think of something I can try?

    1)  Apple ID: All about Apple ID security questions
    2)  See Here... ask to speak with the Account Security Team...
    Apple ID: Contacting Apple for help with Apple ID account security

  • Exchange server not receiving emails from gmail

    Hi dear.
    From 2 days ago our exchange server 2013 not receiving email from gmail account. but we can send from our exchange or outlook to gmail account.
    we can receiving email from yahoo, hotmail, aol or other mail server But, just gmail account we can not receive email. plz help us, how can i do.
    Thanks

    Hi Beigi,
    According to your description, I understand that Exchange cannot received the message from Gmail, however others works well.
    Great checklist from Hotaka.
    Additional, I want to double confirm whether any other antivirus and protection software in your environment, also the
    Anti-Spam
    or
    Transport rule settings, for example sensitive words, IP block list and attachment filter, so that the message from external trigger constraints and be rejected. Meanwhile, please double check in OWA.
    Besides, please use message tracking log to get more details for this issue. It’s more helpful to narrow down the problem, for your reference:
    http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx
    Best Regards,
    Allen Wang

Maybe you are looking for