User Groups for Queries

All,
I have a user that gets a message stating that they are not assigned to any user group when using t-code SQ00.
I have checked and the profile they are assigned to has rights to run SQ00 and I have also checked SQ03 and I do have her assigned to query groups.
Am I missing something?  I've been administering users for years and have never had one with a problem like this.  All the usual areas are fine.
Thanks for you help!

i have to apologize - i didn't read your post carefully - my mistake.
does this also happen when parameter AQB in SU3 is set to a default user-group?
have you checked whether infosets are assigned to that particular user-group?
Edited by: Mylene Euridice Dorias on Feb 13, 2008 5:18 PM
i'm editing this: i have just been testing. is the infoset assigned to that usergroup properly generated?

Similar Messages

  • Transport user groups/infosets/queries from test system to productive

    Hello experts,
    i'm trying to transport user groups/infosets/queries but it seems it doesn't work.  For example, i select the infoset, then the transport button.
    I choose EXPORT
    then Transport Infosets
    I type the infoset name
    but i cannot understand if i should change the "IMPORT OPTION-REPLACE".
    Can anyone guide me with this procedure?
    Thank you in Advance
    N.

    Hi Nantia,
    Step 1. Run RSAQR3TR in 'old' system. Select EXPORT and specify the objects to be transported. 
    (System includes these in an automatically created transport request) 
    Step 2. Release this transport and request it be transported to 'new' system. 
    (This results in the entries being populated in transport table AQTDB in 'new' system). 
    Step 3. Run RSAQR3TR in 'new' system. Select IMPORT and tick the Overwrite checkbox. Specify the transport number in the field labelled 'dataset with imports'. 
    (RSAQR3TR gives the message that stuff has been imported OK). 
    Step 4. In my example I still couldn't find the queries, so ran RSAQR3TR one more time, this time specifying 'Copy Standard Area -> Global Area'.

  • How to add a default user group for multiple document type's?

    Hi,
    I am trying to add same default user group for different document types when MA is created. Is there any way to setup using a single "Document Security Template"? Or I need to create different templates for different document types?
    Please confirm.
    Thanks,
    Saloni

    Hi Saloni,
    Based on what your specific requirement, it might be easier to do it with scripting.
    If you are doing it using Document Security Templates, you would have to create a Document Security Template for each of the 6 MA types and assign the default group. Create another one and leave the Document Type field blank, so it will apply to the other 4 MA types that don't have a default group.
    Regards,
    Vikram

  • Security permission to user Group for menuitem in ax 2012

    Hi experts,I have a query,
    Query is that i want to give menu item level permission to user group,for e.g i want to show accounts Payable
    all set up parameter to Finance Group,so how it can be done? i don't want to use Roles--->Duties------->Privileges method,
    I want to just create two groups for one ACount Payable set up parameters will be showed on main ,and for
    other group it was disable?
    is that possible with out creating new roles ,duties and then privileges procedure?

    Hi Munsifuv. You might get more help on this and your other AX questions on an AX-specific forum. We can help with connecting Power Query to data sources, but aren't necessarily experts on configuring those sources.
    Thanks,
    Ehren

  • How to create a valid database User/Group for installing Linux 5,3

    HI:
    I am trying to install E-Business Suite on LINUX and gave me the following error report
    Unable to validate Database User/Group :oralce /dba
    Provide a valid Database User/Group for the installation.
    when I was installiing on Windows, it did not gave me this error.
    How do I have to crate a user/Group to install eBusiness on my Linux/
    Please help
    Ali

    Hi user;
    hi Ali;
    Yes I run as a root userKeep using root
    When I use the following at the terminal
    It gave me a error message
    " Provide a valid Database User/Group for the installation. "
    Here is what I type at the terminalIts seems normal becouse u try to create same user!
    root@vis groupadd dba
    root@vis useradd -g dba -d /home/oracle vis
    root@vis useradd -g dba -d /home/oracle oracle Try this plz:
    groupadd dba << i think this group already created!
    useradd -g dba -d /home/applmgr applmgr << for apps node
    useradd -g dba -d /home/oramgr oramgr << for db node
    As you notice we define 2 different user under /home path!
    Regards
    helios

  • No provisioning of User Group for authorization field in user master

    We are implementing CUP 5.3 workflows. Both in manual proviosing and automated provisioning based on User Defaults the user group gets only provisioned to the Groups tab in SU01. The field User Group for authorization on the Logon data tab remains empty (field CLASS from system table USLOGOND, filling CLASS field in table USR02).
    In User defaults both under user default as on the user group tab the user groups have been defined. In manual provisioning the correct list of user groups get displayed for selection.
    Under field mapping in the Application field I only find User Group in user master maintenance, but not User group for authorization. However I would assume I do not need to use field mapping, as I want to automate this provisioning based on user defaults.
    Am I missing a configuration setting here? If so, where can I set it?
    I would assume the provisioning of this field is possible. RAR reports the user group also based on the User group for auhtorization and not from the Groups tab.

    S.Pados,
    I can assure you that what I said in my last response does provision the User Group For Authorization Check on the Logon Data tab; in fact, I was having the opposite issue where the Group tab was not being provisioned; however, I am ruunning AE 5.2 and you said you are running 5.3; maybe something did change or got lost in the releases; it probably is good to see what SAP has to say about this; I would hate to lose this capapbility when I upgrade to AE 5.3
    As far as using the custom field for multiple applications, would that field not be usable for any of the applications you would select in the request form?; if you are using the same table names in the different SAP systems (selectable by the application field on the request) would the drop down selections be whatever the table has defined for that system? I may not be understanding something here so I am just asking;
    It would be great to have a Group field automatically filled in by another selection to avoid the user involvement; I agree with you there; because of our concerns on users entering the AE request, our shop has decided to continue with the users submitting the request through normal email and the security administrators perform the AE entering; this way we have a better idea on something like the GROUP field; we have an option to include the original email as an attachment for justification of the request
    Sorry I could not be of more help
    Jerry
    Ryerson,Inc.

  • How to create user group for EIS (Executive Information System) KCBA

    Dear Experts,
    How to create user group for EIS (Executive Information System)
    TCode KCBA
    Regards
    Saurabh

    Hi ,
    Check the below link ,hope it will give some inputs for creating groups.
    http://help.sap.com/saphelp_470/helpdata/en/5c/c1c81c445f11d189f00000e81ddfac/content.htm
    Regards
    udayakumar.k

  • Users group for View not for publish

    Hi guys,
    Does anybody can tell me how can I creat users group for view
    and not for publication?
    It's something like to create Contribute roles, but is not
    related with the permission levels to publish, but with the
    visualization permissions for exclusivy content, for ex.:
    Home (open for all users)-------- IT Dept--------Directory
    Dept ---------Support Dept
    - Johny - Johny - Joseph - Isaac
    - Jack - Jack - JJ - Jason
    - Rose - Rose - Robert
    - Joseph - Lisa
    - JJ
    - Isaac
    - Jason
    - Robert
    - Lisa
    Please somebody help me, It's very, very important!!!
    Thanks in advance for who can help me.
    San.

    Sandra Bercke wrote:
    > Hi guys,
    > Does anybody can tell me how can I creat users group for
    view and not for
    > publication?
    > It's something like to create Contribute roles, but is
    not related with the
    > permission levels to publish, but with the visualization
    permissions for
    > exclusivy content, for ex.:
    >
    > Home (open for all users)-------- IT
    Dept--------Directory Dept
    > ---------Support Dept
    > - Johny - Johny - Joseph
    > - Isaac
    > - Jack - Jack - JJ
    > - Jason
    > - Rose - Rose
    > - Robert
    > - Joseph
    > - Lisa
    > - JJ
    > - Isaac
    > - Jason
    > - Robert
    > - Lisa
    >
    > Please somebody help me, It's very, very important!!!
    >
    > Thanks in advance for who can help me.
    >
    > San.
    >
    You cannot restrict on the users to view a particular folder
    (say IT
    dept) using contribute. Infact there is a setting in IIS
    Webserver which
    allows you to set an Authentication mechanism where users
    when browsed
    to any site on your webserver will be prompted for username
    and password.
    But you might want to try something like this.. not sure if
    this will
    help you...
    1. Create 4 connections in contribute
    a) first connection to "Open for all users" directory on
    your webserver.
    b) second connection to "IT Department" directory on your
    webserver.
    c) third connection to "Directory dept"... etc
    2. This way you can administer 4 sites and send connection
    keys to them
    accordingly...
    Hope this helps.

  • Lion upgrade removes user/group for nagios (nrpe)

    FYI:
    Maybe this'll help someone else. I run nrpe/nagios on a couple of my Macs. Upgrading to Lion from SL the upgrade installer removed the user/group for nrpe. On reboot, launchd could not start the process because getpwnam("nagios") failed. The error was repeatedly reported to system.log (Macintosh com.apple.launchd[1] (org.nagios.nrpe[18251]): getpwnam("nagios") failed) causing launchd to use excessive CPU and battery. Recreating the user/group allows the process to start, which allowed launchd to return to normal CPU levels. Also maybe helpful is that when I turned networking off launchd stoped reporting the error which caused the symptoms to stop (which sent me down a fruitless path).
    This error occurred on both a MBP and a Mac Mini. I've reported in via feedback.
    Thanks for listening... Mark

    I have a similar problem - I need to change my account (short) name so that I can backup both my old computer and new computer on timecapsue independently.  However, the link you provided is only for 10.6 and earlier, not for Lion.  Are the instructions for Lion similar?  For one, I have no directory utility on Lion.
    Thanks for your help.

  • User groups for Oracle Financial package

    Where can I find user groups for the Application Packages such the Financials Package? I would like to find
    information and resources.
    Thank you.
    null

    The main user group is OAUG, and then each region has its own group.
    the web site is www.oaug.com
    HTH

  • How can we provide access/provide permissions to a user/group for group of folders at single step??

    Hi Nico, Thaks you so much for your reply,, Can you please advice or give me some steps to write script pelase? Regards,Kareem

    Hi All, How can we provide access/provide permissions to a user/group for group of folders  at single step?? I can able to provide access for a single folder at a time. I want provide access to a list of  folders( more than 30 ..) at single step?? Regards,Kareem

  • Define User/Group for an SMB share being mounted!

    Ave,
    Mac OS X 10.3.9 had a very easy way of defining UID & GID of a share being mounted on a mount point, to define an Owner of the content.
    mount_smbfs -u 70 -g 70 //usr:pwd@ip/share SharePoint
    This would make Apache Web Server the User/Group for the mounted share, and this way PHP could access the files on the mounted share with no problems.
    Leopard has elimited that -u & -g arguments to mount_smbfs, and I can't for the life of me figure out how to define User/Group on a share being mounted.
    Any clues?

    sudo -u www mount_smbfs -f 0777 -d 0777 //usr:pwd@ip/share node fixed it!

  • How to pass the User Group for a SQ00 Transaction iView

    Hello,
    To start off, I am relatively new to SAP technology in general.  I may be missing something obvious.
    I am trying to create an SAP Transaction iView in our EP Portal that will call the SQ00 transaction (start query) and run a particular query against our R/3 backend.  I set the Transaction Code to: SQ00, the application parameters to: RS38R-QNUM=<my query> and the OK Code to: SHOW and the System to the System alias for our R/3 system.
    My problem is that the query that I need to run is not in the default User Group that comes up by default.  So I get a screen that has the query field (RS38R-QNUM) correctly populated but the error that the query has not been created.  From that screen I can navigate to the correct User Group and then run query.  There does not seem to be a User Group field on the screen, you change it by accessing a different menu, so I do not know how to call the screen for a particular User Group.
    Is their an application parameter that I can initially pass to set the User Group?
    Thank you.

    And my lecturer is suck, every lectures she just read
    the slices and never explains why and how they are.
    (If ask her, she talks and talks rubbish and
    eventually I get nothing)Maybe you should drop the class and complain to the administration.

  • How to create a New user group for AD-HOC

    when i select a work area for ad-hoc i dont find any exisitng user groups...
    i get a blank screen with an error saying no usergroup
    is there a possibility to copy these across clients?
    pls advise
    thanks

    Hi,
    sorry but my english isn't the best so i try an answer again and hope i'm on the right way:
    Step by step guide for example client 100 and 200 on the same system. System 100 has usergroup test001 and client 200 has not.
    1. call sq03 in client 100
    2. pick the transport truck
    3. pick radiobutton [Export] and and radio button [Transport user groups] fill in the field [User groups] with test001.
    4 Execute and write(copy to clipboard) down the transport number
    5 logon to client 200
    6. call sq03
    7.pick the transport truck
    8. pick radiobutton [Import] and radio button [Transport user groups] fill in the field [Dataset with imports] with the transport number.
    9. Execute
    After that your user group should be in client 200.
    If you want to transport between different systems you have export the transport request first.
    Regards
    Bernd

  • Cannot Manage User Groups for sampleportal

    Hi:
    Hopefully someone has seen this and has a solution. We've installed the sampleportal
    application and have begun to add portal pages and new portlets as a proof of concept.
    We're trying to entitle a portlet to a specific User Group. The groups exist.
    However, clicking on the User Group Mgmt. link yields a NullPointerException. Trying
    to edit a user brings up the Edit User Attributes page with the link to edit the
    password, but another NullPointerException for the Property Sets and Properties associated
    with REAPVisitor1 Edit portion.
    Hopefully someone has an idea. Any help would be appreciated!
    Thanks,
    Chris
    The error text for the User Group Mgmt. is:
    An error occurred:
    java.lang.NullPointerException:
         at com.bea.portal.admin.visitor.servlets.jsp.taglib.GetPropertiesTag.doStartTag(GetPropertiesTag.java:95)
         at jsp_servlet._tools._portal.__edit_user_group._jspService(__edit_user_group.java:1061)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:241)
         at com.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doGet(WebflowServlet.java:168)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
         at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
         at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

    Chris,
    Please report this to the support, so that this can be looked into.
    Thanks
    Subbu
    Chris Wolfe wrote:
    Hi:
    Hopefully someone has seen this and has a solution. We've installed the sampleportal
    application and have begun to add portal pages and new portlets as a proof of concept.
    We're trying to entitle a portlet to a specific User Group. The groups exist.
    However, clicking on the User Group Mgmt. link yields a NullPointerException. Trying
    to edit a user brings up the Edit User Attributes page with the link to edit the
    password, but another NullPointerException for the Property Sets and Properties associated
    with REAPVisitor1 Edit portion.
    Hopefully someone has an idea. Any help would be appreciated!
    Thanks,
    Chris
    The error text for the User Group Mgmt. is:
    An error occurred:
    java.lang.NullPointerException:
         at com.bea.portal.admin.visitor.servlets.jsp.taglib.GetPropertiesTag.doStartTag(GetPropertiesTag.java:95)
         at jsp_servlet._tools._portal.__edit_user_group._jspService(__edit_user_group.java:1061)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:241)
         at com.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doGet(WebflowServlet.java:168)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
         at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
         at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

Maybe you are looking for