User Guides in HTML format

Hi,
I want to know if the User guides are available on the Web in HTML format. I have seen the User guides in the PDF format on the Appsnet website. Somebody help.

I can't really tell from your description, but it sounds like you are doing it wrong and should do this: Oracle® XML DB Developer's Guide Contents

Similar Messages

User guide language

My system is in french, so Logic X appears in french in my iMac.
I prefer using the english version so I used Language Switcher to use Logic X in English. So far so good.
The problem I have is when i launch the user guide in the help menu, it still appears in french.
Anybody knows how to correct the situation?
I have tried to find where was the user guide located in my computer but cannot find it.
The only solution I found so far, is to download the english user guide in PDF format but would prefer to acces the help file via the help menu in logic.
Thanks for the help

Hi... Thanks for the information, but unfortunately this is for other product named in the same way.
I'm looking for Nokia 2220 SLIDE (pls, check the following URL: http://europe.nokia.com/find-products/devices/nokia-2220-slide)
Thanks,
Marlon R.

Unable to track a specific user guide

Hello netpros,
Is anybody aware of the existence of the following guide:
User Guide for Cisco Video Portal 5.1.x.
According to: User Guide for
Cisco Digital Media Manager 5.1.x
March 17, 2009 (page 4-10) it should exist somewhere but is not listed under DMS-Video Portal-User guides.
Any suggestions?
Thank you

panayiotiscy ,
To be honest, I don't believe there was ever a 5.1 "User Guide". The were not many if any "User" changes between 5.0 & 5.1. There is a Management portion built into the 5.1.x DMM User Guide.
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_1/dmm/user/guide/vpm.html
I will verify with the Product team but I am pretty sure it wasn't there.

HT5278 Looking for Apple iPad 2 Users Guide PDF

I have been trying for hours. I can not find any place within Apples Web Sight so that's I may simply download the iPad 2 Users Guide in PDF format? Thank you!

http://support.apple.com/manuals/#ipad

HTML DB Developers' or users' guide?

Hi,
is there developers' or users' guide for HTMLD DB? The tutorials are pretty on OTN, but it presents the product in a somewhat ad hoc way.
Thanks in advance.
Tamás Szécsy

You are looking for the ORacle HTML DB User's Guide. The part number is B10992-01. It is located on OTN at http://download-west.oracle.com/docs/cd/B13789_01/appdev.101/b10992.pdf

BAI File format User Guide

Hello Friends - Can someone pls provide any link to get BAI File format User Guide.
Is there any change in file format (BAI) between Banks or it will be the same among all the Banks?
Thanks

Hello GT,
BAI is the standard file format across the world.
Where Code.
010 for Opening Ledger Balance
015 for Closing Ledger Balance
100 for Total Credits
101 to 399 for Incoming Payment
400 for Total Debits
401 to 699 for Outgoing Payment.
You can find more details for each code in the below link.
https://www.key.com/kttu/pdf/tkBAI2.pdf
These codes are vary in the file between bank to bank. For example, ACH Settlements Debit.
Some banks use code 466 and some are use 455. But they always use from 101 to 399 for Incoming Payment and 401 to 699 for outgoing payment.
Please let me know if you have any further doubts.
Regards,
Kalim

IPhone User Guide Format Issue After 4.3 Upgrade

The iPhone User Guide is no longer formatted properly since I upgraded to iOS 4.3. Although the info is there, the top third of the screen remains stationary, while the rest sometimes scrolls. On some screens, it's not possible to scroll down enough to see all the info. Has anyone else had this issue after upgrading? If so, what did you do to resolve it? I'd appreciate any suggestions. Thanks.

Have taken to downloading the PDF but it's not nearly as quick and easy to use.
You need to restore your phone in iTunes, first using a backup, and if needed as a new iPhone, without using a backup. All is explained in the User Guide.
Starting to question why I did't go android. I thought apple products err just supposed to work!
No one here cares if you go androgynous. I'm sure they all work perfectly all the time.

Where can I find a user-guide for the awfull Text-Editor used to enter/edit these forums entries?

I am desesperate to understand how quite basic functions (just as one of many examples: how can I paste text, that I have formatted in MS Word and want to paste into a Forum Post-Entry?) can be done with the primitive and awful Text Editor used to enter/edit Forum Entries. Notice, that like many other Adobe users, I am not familiar at all with HTML and it is therefore a description of the badly named "Full Editor" that I am looking for.
Where can I find a User-Guide for this Text Editor?
My recommendation to Adobe: exercise enough brute pressure on the developers of this primitive Text Editor to force them to provide something more reasonable, more powerful and more intuitive.

Thank You Jochem
I was trying to understand how I could do things as simple as inserting text that I had previously copied. Since there are neither command menüs nor buttons for the Insert of previously copied text, I was trying a mouse right click.....and was being offered in the context menu the choice between "Insert Link", "Insert Image", "Alignement", and "Insert Table"....... but no possibility of a plain insert of previously copied text.
Now, I realize, that Clearstream supports at least the keyword shortcut of "Ctrl V" ........that I am not using in any other software (I never use any keyboard shortcuts).
Since Clearstream does not support reasonable choices in the contextual menus, I will need to memorize the most important keyword shortcuts.
By the way: I detected now, that the "Ctrl V" keyboard shortcut allows me to insert formatted text.
Even, if I will now begin to be able to use reasonably Clearstream, I am quite surprised to see that such a software provides neither reasonable Contextual Menus, nor a User Guide, nor........
Thank you again Jochem for your patience with me.

User guide: MSI HQ USB BIOS Flash Tool

Guide based on USB tool v1.17c
HOW TO properly use the MSI Forum HQ USB Flashing Tool to update your BIOS
This user guide provides a step-by-step explanation for properly using the >>MSI Forum HQ USB Flashing Tool<< to prepare a USB Flash Drive for a safe BIOS-Flash in a pure DOS Environment. The tool itself will not perform the actual flashing operation. It will "only" help you to get your USB Stick set up for an automated DOS flashing procedure which requires final confirmation. (If you should run into any problems before you are prompted for final confirmation in DOS, no attempt to flash has been made yet and there is no danger of a bad flash.)
NOTE: If you are having problems getting your USB device to boot correctly, you may need to format it correctly as the geometry data may be incorrect. You can do that by pickup option "Fix My USB key" from the Tool or by using >>> THIS <<< tool here! For future usage you can skip this step, it need to be done only once if your stick need adjustment.
Symptoms that your USB key need a fix after booting from the USB key:
* Error: "No bootable partition in table"
* Blinking cursor in a top left corner and nothing happens
* "RIVER2 MSI"
* "Error loading operating system"
* "Missing operating system"
* "Disk in drive is not a bootable"
* Booting from selected USB key is IGNORED, the other/typical OS continue to load as usual
If still no change after using "Fix My USB key" Tool's option or HP Formatter Tool as alternative.
Then try with different USB key, the issue is there.
Note: Those USB keys who support "U3 Smart", this "feature" must be removed before proceed.
Refer to followed link: http://u3.sandisk.com/launchpadremoval.htm
Read the three notes that follow first before you move on:
1. Note: Before you even think about flashing a different BIOS, be sure that your system is stable. If it is not stable, make it stable first. (Read >>here<<.)
2. Note: Make sure your system meets the preconditions and system requirements mentioned below before you attempt to use the tool.
3. Note: Do know that flashing your BIOS, be it with the help of the tool or otherwise, is done at your own risk.
Contents of the Guide:
0. Preconditions & System Requirements
1. Basic Description of Functionality
2. Installing/Starting the tool.
3. Choosing a Preparation Method
3.1. Method 1: Processing a BIOS Archive Directly (ZIP/RAR)
3.2. Method 2: Processing a BIOS File Directly
3.3. Method 3: SureHands Live Update
3.4. Method 4: Geometry Change
4. Selecting the USB Flash Drive for preparation
5. BIOS Settings, Booting & Flashing
5.1. BIOS Settings to Check
5.2. Booting from USB Flash Drive
5.3. Flashing Procedure/Running MemTest86+ & CMOS-Clear
6. FAQ: Common Problems & Solutions
7. Version History
0. Preconditions & System Requirements
The main precondition for using the tool is a working & healthy Windows installation on the system that needs the BIOS flash. The Tool is designed to work with MSI Retail Boards & Laptops only.
Please note mainboards of other brands and OEM boards that are manufactured by MSI but sold by Medion, HP, NEC and others are not supported. If you have an OEM board that needs a BIOS update read this topic: >>OEM boards manufactured by MSI<<
Supported Operating Systems: All current Windows Versions (32bit & 64bit, any service pack (SP)): Windows NT, Windows 2000, Windows 2003, Windows XP, Windows Vista, and Windows 7.
The second requirement is that you have a fully functional USB Flash Drive that uses the FAT file system (FAT/FAT32). NTFS is not supported. If your USB Flash Drive is using the NTFS File System, reformat it to FAT or FAT32.
As the tool also provides a Live Update Option ("SureHands"), you'll need a working internet connection if you want to choose this method. Not all boards are supported at this point.*
* Check section 3.3 of this guide to see if your board is currently supported by the SureHands feature.
1. Basic Description of Functionality
The MSI Forum HQ USB Flashing Tool will help you to easily prepare an USB flash drive for an automated BIOS flash in a pure DOS environment, which is the safest way to perform such a procedure. The tool will also allow you to run MemTest86+ in a pure DOS environment. However, the preparation of your USB Stick is done in Windows and basically includes two steps:
(1) The device will be made bootable.
(2) All necessary files (incl. BIOS file, actual flasher and MemTest86+ executable) and all DOS commands that are needed to flash/test memory will automatically be implemented.
Because the tool does not reformat your USB Flash Drive*, no files that may currently be on the stick will be lost during the procedure. Just make sure that there is still some free drive space, otherwise there will not be enough room for the files that are needed for BIOS Flashing.
* Excluding the Geometry Change method which will destroy all data on the USB storage device.
2. Installing/Starting the tool
Treat the forum's USB Flashing Tool like a regular application. Download it to and run it from your hard drive, there is no need to copy & start it from the USB Flash Drive that you want to use for flashing. Both, the installer version and the stand-alone version, do precisely the same job. Which of the two versions you use, is solely up to you and your preferences. The stand-alone version can be started directly by clicking on the executable file. The installer version will perform an installation and provide you with an entry in your start menu and a desktop shortcut to start the tool.
When you start the tool a DOS box should open up to provide you with status messages and prompts. Do not close that box unless you want to abort the preparation procedure!
Please ensure that you connect the USB flash drive you wish to use before starting the Tool!
NOTE: If you do not connect your USB storage device before starting the tool, or the tool doesn't detect it. You can still insert the drive letter, as the tool will continue as normal.
The tool will first check, if an MSI mainboard is installed in your system and show you its model name and PCB Version in a message box. Click >OK< to continue to choose the tool's preparation method that you want to use to prepare your USB Flash Drive.
3. Choosing a Preparation Method
If your MSI Retail Board is properly detected and you have pressed the >OK< button in the message box, an option box will pop up that allows you to choose between three different operating modes. The options you can choose from are more or less self-explanatory, however, read the detailed description if you are unsure how to proceed at this point:
3.1. Method 1: Processing a BIOS Archive Directly (ZIP/RAR)
Official MSI BIOS-Updates that can be downloaded from the product site of your board model do usually come as .ZIP or .RAR archives that contain the actual BIOS File and the corresponding AWARD or AMI flashing utility (depending on the BIOS Type of your board). If you have downloaded such an archive, you should choose the first method from the option box.
You do not need to extract the files from the BIOS archive. The tool will ask you to point it to the archive you downloaded and automatically extract the BIOS File and the AMI or AWARD flashing utility and put it them on your USB Flash Drive. You don't have to worry about anything else. All you have to do is to remember where you saved the ZIP or RAR file you downloaded:
3.2. Method 2: Processing a BIOS File Directly
If you do not have a ZIP or RAR archive that already contains a BIOS File and the proper flashing utitility, but only the plain unpacked BIOS File, choose the second Method from the option box. In most cases BETA BIOS Files supplied by MSI Support or shared here in the Forum do not come with the proper flashing utility. If the MSI Forum HQ USB Flashing Tool is told to process a plain BIOS File, it will automatically check the type of BIOS File (AMI or AWARD) and then select the proper flashing utility that needs to be used. All you need to do is point the tool to the BIOS-File that is supposed to be flashed:
3.3. Method 3: SureHands Live Update
"SureHands Live Update" is the third operation method you can choose from the option box. It provides a much safer and more reliable alternative to MSI Live Update as the actual BIOS Flash is performed in a pure DOS environment as well. If you decide to use this option, you do not to supply the tool with a BIOS-Archive or a BIOS-File.
Not all MSI Retail Boards are currently supported. With every update of the USB Flashing Tool more boards will be added. At present, you can use the "SureHands" Live Update method with the following boards only (the list will be updated regularly):
AMD based boards:
K8N Neo4-F (MS-7125, PCB 3.0)
K8NGM2-FID (MS-7207, PCB 2.0)
K8N Diamond Plus (MS-7220, PCB 1.0)
K8N Neo3 (MS-7135, PCB 1.0 & 2.0)
K9A Platinum (MS-7280, PCB 1.0)
K9A2 Platinum (MS-7376, PCB 1.0)
K9A2 CF-F (MS-7388, PCB 1.0)
K9N Neo-F (MS-7260, PCB 1.0 & 2.0)
K9VGM-V (MS-7253, PCB1.0)
K9N2GM-F V2 (MS-7509, PCB 1.0)
K9N Neo V2 / V3 (MS-7369, PCB 1.1)
K9N Platinum & K9N SLI Platinum (MS-7250, PCB1.0)
K9N2 Diamond (MS-7375, PCB 1.1)
K9N2 SLI Platinum (MS-7374, PCB 1.1)
K9N2 Zilent (MS-7374, PCB 1.1)
K9N2 Neo-F (MS-7511, PCB 1.1)
DKA790GX Platinum (MS-7550, PCB 1.1)
790FX-GD70 (MS-7577, PCB 1.0)
790GX-G65 (MS-7576, PCB 1.0)
Intel based boards
HydroGenX48C & X48C Platinum (MS-7353, PCB 3.0)
X48 Platinum (MS-7353, PCB 1.0)
X38 Diamond Plus
X38 Diamond (MS-7353, PCB 1.0)
X38 Platinum (MS-7353, PCB 1.0)
EFINITY-FP (MS-7395(E), PCB 1.0)
P35 Neo Combo-F (MS-7365, PCB 1.0)
P35 Neo2 Series (MS-7345, PCB 1.1)
P35 Platinum (MS-7345, PCB 1.1)
P35 Neo-F (MS-7360, PCB 1.0)
G33 Platinum (MS-7345, PCB 1.1 & PCB 1.2)
P965 Platinum (MS-7238, PCB 1.1)
975X Platinum PowerUp Edition (MS-7246, PCB 2.1)
865PE Neo2-P Platinum Edition (MS-6728, PCB 2.0C)
P7N SLI Platinum (MS-7380, PCB 1.0)
P7N2 Diamond (MS-7523 PCB 1.0)
P7N Diamond (MS-7510, PCB 1.0)
P7N SLI Platinum (MS-7380, PCB 1.0)
P6N Diamond (MS-7320, PCB 1.0)
P6N SLI Platinum (MS-7350, PCB 1.0)
P6N SLI-FI (MS-7350 PCB 2.0)
P6N SLI V2 (MS-7346 PCB 1.0)
ECLIPSE SLI (MS-7520, PCB 1.0)
ECLIPSE Plus (MS-7566, PCB 1.0)
P35 Neo3-F (MS-7395, PCB 1.0)
After selecting "SureHands" from the option box, the tool will automatically check for all available official BIOS-Versions for your mainboard. It will also look for the latest available BETA BIOS Version for you board and save that information in a TXT-File on your Desktop:
Note: The SureHands option will not provide you with the latest BETA BIOS, it will only provide the information.
When the tool is done scanning for official BIOS releases for your board, it will give you the possibility to manually choose the BIOS Version you want to flash. SureHands Live Update will not automatically select the latest version and use it for flashing, it will give you the chance of choosing between all available official BIOS releases that are available:
Note that the "May not exist" comment that appears behind some versions does not mean that the BIOS does not exist. If you know the latest BIOS for your board is e.g. v1.8, SureHands will retrieve it even though there may be such a comment. That message is part of a prediction feature that tries to determine future BIOS Releases. If a BIOS version that was predicted by the SureHands feature is not available yet, the tool will tell you if it cannot retrieve the files and ask you to select an earlier version.
3.4 Geometry Change
If the tool fails to make your USB storage device bootable then you will need to use this mode. It will make your drive bootable, select it:
Select your drive then let the tool do it's business.
Once the process is complete, run the tool again via method 1, 2 or 3, restart your computer and try booting from the USB storage device again.
NOTE: This method will destroy ALL data on the USB storage device!
NOTE: This method is available in v1.17 and beyond.
4. Selecting the USB Flash Drive for preparation
When you have chosen one of the three methods from the option list and pointed the tool at the corresponding archive, BIOS File or selected the desired BIOS Version from the list in case you chose to use SureHands Live Update, the MSI Forum HQ USB Flashing Tool will prompt you to enter the drive letter of the USB Flash Drive you want to use for flashing:
Note that certain drive letters are reserved and will therefore not be accepted by the tool (currently A:, B: and C:). If you are sure you have connected an USB Flash Drive to the system that works properly but it does not appear in the table that appears in the DOS box, enter the corresponding drive letter anyway and see if the tool accepts it. This can happen in rare cases, but it is usually no problem.
The tool will check the selected drive and will provide you with status messages. If everything is okay, the message should look like this:
The tool will attempt to make the device bootable and automatically write all files that are needed for flashing to the drive to prepare it for flashing. If the procedure was successful, you will get the following message in the DOS box:
5. BIOS-Settings, Booting & Flashing
If the Tool has prepared your drive for booting & flashing, no BIOS flash attempt has been made yet. Only the preparation process. In order to initiate the flashing procedure, you have to restart your system and make it boot from the USB Flash drive. Before you move on to do that, enter the BIOS Setup and check a few options:
5.1. BIOS Settings to Check
Check USB-related Options in BIOS:
- USB Controller
- USB 2.0 Controller
- USB Legacy Support
- USB Storage Support
- Boot from other devices
- etc.
Not all of these options may be found in BIOS and the precise name may vary as well. Just make sure you checked for such options and that they are enabled (if present).
Another option you should check for is "Boot Sector Protection". If such an option is present in your BIOS, make sure it is disabled because it may make a BIOS Flash impossible.
@all Overclockers: In case your system is currently overclocked, make sure you roll back to default clock and voltage settings before you attempt to start the flashing procedure. Otherwise you increase the risk of an unsuccesful flash, and you most probably don't want something like that to happen.
5.2. Booting from USB Flash Drive
To boot from your USB drive you can either change the boot sequence in BIOS accordingly or just press F11 during POST* to get access to the BIOS Boot Menu. From here, you can select you drive directly without having to adjust the boot sequence in BIOS. Note that your USB Flash Drive may be listed as a hard drive (if you choose that entry you will get another list to choose from).
* Not all mainboards use F11, for the boot menu. If F11 fails for you, please consult your manual for the correct key.
Note: If you have problems booting from your drive, look at the FAQ-Section of this guide and see if any of the tips resolve the issue.
5.3. Flashing Procedure/Running MemTest86+
As soon as the system boots from the drive, DOS will be loaded and you will be displayed with two options. One option will start MemTest86+, the other will begin the flashing procedure. If no choice is made, MemTest86+ will automatically start.
The flashing procedure will automatically be initiated from there. You will see status messages on the screen that will supply you with information and also prompt you for final confirmation for the actual BIOS-Flash. A backup of you current BIOS will automatically be saved to a file on the drive (backup.bin) before the flashing actually starts. You do not need to enter any commands in DOS. All you have to do is acknowledge the information on the screen by pressing a key.
The flash itself will only take a couple of seconds (20-30s at the most). If the flashing is successfully completed, shutdown the system and clear CMOS with main A/C power cable removed from PSU. Read the >>Clear CMOS Guide<< for further information.
After clearing CMOS you have completed the BIOS-Flash.
Guide created by Jack The Newbie and the forum team

Version updated to 1.18x:
* Mode 3 Sure Hands, Live Update:
- Removed beta BIOS query check[global]
- Fixed issue K9N2 Diamond unable to be detected as supported unit if onboard is installed BIOS version 2.4,
add dynamic detection for future versions.
- Fixed issue 790FX-GD70 unable to be detected as supported unit and add dynamic detection for future versions.
- Fixed issue 790GX-G65 unable to be detected as supported unit and add dynamic detection for future versions.
- Add support for 785G-E65, add dynamic detection for future versions, prediction BIOS range 3.1 - 3.A
- Add support for 785G-E53, add dynamic detection for future versions, prediction BIOS range 3.1 - 3.A
- Add support for 790GX-G65 Winki ED, prediction BIOS range 2.1 - 2.A
- Fixed issue P7N Diamond unable to be detected as supported unit if onboard BIOS installed is 1.3 and above,
add dynamic detection for future versions.
- Add support for K9A2 Neo2, prediction BIOS range 7.4 - 7.D
- Add support for 790XT-G45, prediction BIOS range 2.2 - 2.B
- Add support for 770T-C45, prediction BIOS range 8.4 - 8.D
- Add support for 770T-C35, prediction BIOS range 8.4 - 8.D
- Fixed issue K9A2 Platinum[V1,V2] unable to be detected as supported unit if onboard BIOS installed is 1.9,
add dynamic detection for future versions, prediction BIOS range extended to 1.F0
- 790GX-G65 board prediction BIOS range extended to ver: 1.D0
- 790GX-G65 board update bios base ver from 1.xx to 4.xx [following new msi rule for this board jumping from 1.xx to 4.xx]
- Add support for 770-C35|C45 boards [p1] BIOS range 1.40 - 1.D0
- Add support for 770-G45 board [p2] BIOS range A10 - AA0
* Add "Exit" option to navigation screen
* Update version info related to boot part
* Update boot part to handle newest features
* Modify Self update sequence of Installer version
* Update internal version check ID
* Mode 4 minor update
* Build and add new Tool's module for newest features
* W32 Tool's exit time part decreased by 10 seconds
* On received OS reboot user request, time delay before execution decreased by 15 seconds
* Update EC decoder
* Update start-up information screen
* Auto store start-up detected information to user's desktop ==> [MSIHQ_INFO.TXT]
Details:
Easy to show machine information on request, instead write down from the screen manually, now just copy/paste can be used from MSIHQ_INFO.TXT
User can check and compare information before and after the BIOS update
Also usefull if didn't remember what was his original BIOS or EC versions before the update, Tool will auto store it there.
And easy can be checked if needs. E.g Tool's log file of each Tool's execution, each report will include date and time as well.
F.A.Q example:
Q: I flashed BIOS on my notebook and now it doesn't work properly.. And i don't remember what was my old BIOS version.. What can i do?
A: Take a look in MSIHQ_INFO.TXT at your desktop, there is auto recorded your detailed information about your notebook before the BIOS update.
So you can easy find what was your original BIOS & EC versions.
Is it OEM one or not, and the exact original BIOS & EC versions.
So you can roll back easy or if crossflashing were done to reflash to correct versions.
Example question:[this board now use 4.xx bios, but don't have time to make a new images.]
It's just example, do not mean that this BIOS used in the example is bad. But generally often can need to roll back to older version.
Or to use Sure Hands because[The BIOS is N/A for manual download, By SureHands no need to browse/search/download and point to the BIOS version, also eliminate any chances to pickup the wrong BIOS, and not at last its more quickly[save a time]]
Q: I flashed my BIOS via MSI Live Update, but the new BIOS has an issues.
How i can roll back to my old BIOS version?
The MSI LiveUpdate can only update to the latest BIOS version, which is not good for me.
And i can't download my old BIOS version manually... Because "This BIOS can only update via Live Update function"
http://eu.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1739
How i can re-flash to my original BIOS version and from where can i get it?
A: Run >>Use the MSI HQ Forum USB flasher<<,
then choose Mode 3 [Live Update{aka SureHands}]:
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in ба 30.12.2009 Ј. at 21:09:45,15
Mainboard: 790GX-G65 (MS-7576)
PCB Version: 1.0
BIOS Version: V1.3
BIOS Date: 05/08/2009
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in ба 30.12.2009 Ј. at 21:22:38,42
Mainboard: 790GX-G65 (MS-7576)
PCB Version: 1.0
BIOS Version: V1.6
BIOS Date: 11/30/2009
Then choose your old BIOS version from the list:
The followed image used below is a sample from Eclipse board,[no time to make accurate image] but will look similar for others boards too:
In a list will be noticed that there is a future BIOS versions.
Some of them will be not released yet. If you pick some of those the Tool will note you:
It's a part of Tool's BIOS prediction system called "Crystal Ball", when MSI release a future BIOSes for your board,
Tool can find them immediately. By that way the Tool no need to be updated to be actual in each moment
* Add new feature "True BIOS Version Ready"
- Updated Mode 1
- Updated Mode 2
- Updated Mode 3
Details:
Q: What "True BIOS Version Ready" means? Does the Tool show the wrong BIOS version until now?
A: Of course not, the Tool always show accurate info.
The same as CPU-Z/Everest of whatever other Tool.
However Tool also detect EC-FW versions for notebooks:
The "True BIOS Version Ready" Tool's feature is aimed to eliminate user's mass confusion about MSI BIOS versions.
And not only users are confused, but MSI's Live Update is confused too... which confuse users even more..
Few typical real examples of confusion:
"K9A2 CF wont flash to Bios v. 1.A !!!"
Quote from: Fingon on 25-October-09, 16:53:15
Hi MSI,
I have a problem. I have bought a new processor: AMD Phenom II x545. I looked on the support page of my MB (MSI K9A2 CF) and there the CPU is supported from the bios version 1.A. So I wanted to flash the Bios the the newest version (1.A). I used the MSI live update 4 program to flash it via windows mode. But everytime it boots it writes "CMOS checksum BAD", then I hit F1 to Bios and I see the version of my BIOS fell to the oldest version 1.1. Then I tried to flash it thru Flash disc (with boot files) and dos mod. The result is the same. I can flash my MB to version 1.8 but when I try the 1.A it wont flash it and my Bios fell to the oldest version (1.1). I realised that the exe files in version 1.1-1.8 are the same (afud412.exe) but the exe file in 1.A is different (afud4310.exe).
My questions are:
1) How to flash my MB to the version 1.A ?
2) Is version 1.A really needed for AMD Phenom II x545? I guess yes, because CPU was avaible in July 2009 and the bios 1.A went out in June 2009. I am able to flash it only to version 1.8 (december 2008).
Thank you for any help!!
EDIT: After reading this topic: https://forum-en.msi.com/index.php?topic=129204.0 I realised I have the VERSION 1 of this board (I purchased it right after the launch of the MB (November 2007). It means it doesnt support CPU over 95W, but my Phenpom II x545 has only 80W. I still cant update Bios to the 1.A version.
So my third question is:
3) Is the Bios update 1.A only for version 2 of this MB?
Thx for replies!
Quote from: Jack t.N. on 25-October-09, 17:16:16
A CMOS Checksum error is normal and expected after a BIOS Flash and/or a CMOS Clear. The fact that this message appears, shows, that there was actually something programmed to the chip.
If you haven't done that yet, please clear CMOS with the main A/C power cable removed from your PSU and load "Optimized Defaults" in BIOS Setup.
The BIOS Version should be shown on the POST Status Screen and there should be a date behind it. Please check the BIOS Date and write it down:
Are you absolutely and entirely sure that what you see is "1.1" and not "1.10"? Because v1.A0 is actually just the hexadecimal notation for v1."10" (one dot ten). The hexadecimal notation is only used in the BIOS File Ending. Once flashed, the BIOS will not identify itself in hexadecimal notation but in decimal code (which means you will never see "v1.A0" after the flash but "v1.10" instead.
Here is a piece of well-meant advice for now and the future: MSI Live Update should be avoided under all circumstances when it comes to BIOS Updates and/or information retrieval regarding your current BIOS Version. Why? Because this tool is stupid and one of there most risky applications for performing a BIOS Flash. Please uninstall it completely.
Why do I call it stupid? I call it stupid because it does not differentiate between hexadecimal notation and decimal notation. It will show you that "v1.A0" is available. The it will flash it, if you allow it to do so. Of course, a v1.A0 Version will always come out as "v1.10" (one dot ten). When you re-run MSI Live Update it will not recognize that v1.A0=v1.10 and tell you again that there is a newer version available (1.A0, which, again, is the same as v1.10, which was just properly flashed).
I believe that the update went just fine, that you are currently using v1.A0=v1.10 and that MSI Live Update is actually just creating a pseudo-problem which is currently confusing you. The pseudo-problem will immediately be out of the world, if you uninstall MSI Live Update and rely on the BIOS ID String as it appears on the POST Status Screen (this includes the date shown there).
If a BIOS Update should ever be necessary again, please make sure that you won't use MSI Live Update but >>Use the MSI HQ Forum USB flasher<< instead.
Quote from: Fingon on 25-October-09, 18:03:44
Thank you for the quick reply!!
Thats exactly what I have JUST found in this post by Svet: https://forum-en.msi.com/index.php?topic=127672.msg974800#msg974800
Yes it is 1.10 of course!! I didnt know that 1.10 = 1.A0 ! Thank you for the reply. Then the MSI live update 4 program is dump that he wanted from me another update of Bios.
So thank you! Problem is solved.
Edit: Yes, because of MSI live update I learned how to flash bios via flash disc. :-) But I was still confused by that 1.10 and of course by program saying me I should update again.. :-P
Quote from: Lostsoul777 on 14-August-09, 05:46:25
I had the same problem with 1.90 bios, so i updated to 1A, i just want to know why Bios Version says: v.1.10 instead v.1A?
Quote from: LinuxGuy on 29-December-09, 01:17:45
My computer does not have a floppy drive. How do I update the BIOS? (I tried the online utility 3 times. It always updates the BIOS "successfully" and when I restart my PC, I have to do either F1 to config or F2 to load setup defaults. So it looks like it's working, but the online update says that I have versions H.10 and version H.A0 is available (or maybe the other way around). So either the BIOS is getting updated, but the online tool is not recognizing this or it's not getting updated. Either way, I would like to manually flash it in DOS. Is it safe to burn the setup files to CD and boot from CD into DOS?
That's the same BIOS version... Just the "MSI Live Updater" is not very smart...
H.A=H.10=17.A=17.10 [A=10, H=17], the last "0" suffix in H.A0 means its official version.
Quote
I tried the online utility 3 times. It always updates the BIOS "successfully" and when I restart my PC, I have to do either F1 to config or F2 to load setup defaults.
So it looks like it's working, but the online update says that I have versions H.10 and version H.A0 is available (or maybe the other way around).
So ignore this MSI Live Updater's no sense, and stop flashing your BIOS. You already have the latest version installed.
The Tool now will detect and shows BIOS versions alias when the MSI BIOS version is known with more than one name.
So no more flashing and flashing and flashing to the same version because of MSI LiveUpdate suggest again BIOS update...
Also no more confusion:
"What's my BIOS version?" -> I flashed my BIOS to 1.A0 [A7520IMS.1A0], but BIOS says its 1.10
And MSI Live Update also says that i have 1.10 and 1.A0 is available and i should update it. I flashed it again, but its still 1.10?
What's going on?
Just run the MSIHQ USB Flash Tool and will show you all that you need to know
Examples[with real/accurate info]:
MSI Eclipse:
BIOS version 1.9:
BIOS version 1.10:[Tool now shows both BIOS versions alias]
Report stored respective in MSIHQ_INFO.TXT at user's desktop:
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in ба 30.12.2009 Ј. at 5:30:55,34
Mainboard: Eclipse SLI (MS-7520)
PCB Version: 1.0
BIOS Version: V1.9
BIOS Date: 09/22/2009
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in ба 30.12.2009 Ј. at 5:37:25,66
Mainboard: Eclipse SLI (MS-7520)
PCB Version: 1.0
BIOS Version: V1.A (aka Version: V1.10)
BIOS Date: 10/27/2009
More examples =>K9N6SGM-V / K9N6PGM-FI / K9N6PGM-F :
More examples =>945GCM5-F V2 (FSB 1333) :
Report stored respective in MSIHQ_INFO.TXT at user's desktop:
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in ба 30.12.2009 Ј. at 5:47:34,35
Mainboard: MS-7267
PCB Version: 4.0
BIOS Version: VH.9 (aka Version: V17.9)
BIOS Date: 11/20/2008
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in ба 30.12.2009 Ј. at 5:52:46,26
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VH.A (aka Version: V17.10)
BIOS Date: 06/02/2009
More examples =>780GT-E63 [N/A at MSI web yet] :
For MSI Notebooks such decoding isn't need, examples:
* Add new feature "Triple BIOS flash Recovery Ready"
- Updated Mode 1
- Updated Mode 2
- Updated Mode 3
Details:
The feature include 3 auto prepared BIOS backups for followed purpose:
* Internal BIOS recovery:
- In a failure case Tool perform auto flash recovery [3 attempts, check for success after each and stop flashing if successful] before give control to BK_IO2, notice users about results and give control for manual attempts[if need]. [This a case if system isn't lockup/reboot, if bad flash occur]
- This mode also have own store up to 5 backups[+1, the last saved copy is always backup.bin, if there was older one they become backup1.bin .. till 5]
* BIOS backup stored as AMIBOOT.ROM [AMI BIOS only] [Auto clean up older if there is any, before take a new backup to avoid recovery confusion]
* BIOS backup detected and stored for M-Flash style boot/recovery [AMI BIOS only] [Auto clean up older if there is any, before take a new backup to avoid recovery confusion]
Performing test simulations with random generated BIOS versions[including betas] for M-Flash boot/recovery style, some examples:
Copy/paste Tool log file:
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:00:53,46
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VD.XB2 (aka Version: V13.33B2)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.DX2
Where:
* V13.33B2 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* VD.XB2 ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.DX2 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:12:23,95
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VK.VB7 (aka Version: V20.31B7)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.KV7
Where:
* V20.31B7 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* VK.VB7 ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.KV7 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:18:34,46
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: V3.9
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.390
Where:
* V3.9 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* MSIHQ Tool "True BIOS Ready" detection feature isn't need here, since this BIOS version can be known only with one name.
* A7267IMS.390 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:22:24,04
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: V8.1B9
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.819
Where:
* V8.1B9==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* MSIHQ Tool "True BIOS Ready" detection feature isn't need here, since this BIOS version can be known only with one name.
* A7267IMS.819 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:25:38,51
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: V4.E (aka Version: V4.14)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.4E0
Where:
* V4.14 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* V4.E ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.4E0 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:28:16,62
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: V1.BB1 (aka Version: V1.11B1)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.1B1
Where:
* V1.11B1 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* V1.BB1 ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.1B1 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:31:57,78
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VI.FB5 (aka Version: V18.15B5)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.IF5
Where:
* V18.15B5 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* VI.FB5 ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.IF5 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:36:02,40
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: V7.O (aka Version: V7.24)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.7O0
Where:
* V7.24 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* V7.O ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.7O0 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:39:11,84
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VC.8B6 (aka Version: V12.8B6)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.C86
Where:
* V12.8B6 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* VC.8B6 ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.C86 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:49:38,46
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VG.PB6 (aka Version: V16.25B6)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.GP6
Where:
* V16.25B6 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* VG.PB6 ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.GP6 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:53:17,26
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VU.H (aka Version: V30.17)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.UH0
Where:
* V30.17 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* VU.H ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.UH0 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]

Service cannot be reached while sending a smart form in html format

Hello,
I'm trying to send a smart form as email in html format and I'm getting the following error message at the beginning of the message:
Service cannot be reached
What has happened?
URL http://localhost/SAP/BC/BSP/SAP/SMART_FORMS/DEFAULT.CSS call was terminated because the corresponding service is not available.
Note
The termination occurred in system XD1 with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
Error code:ICF-NF-http-c:100-u:MYUSER-l:D-i:my_test_system:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
.SYSTEM div#B.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : justify ; clear : both ;}.SYSTEM div#L.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : left ; clear : both ;}.SYSTEM a.SYSTEM span#H.char{ font-weight : bold ;}.SYSTEM span#I.char{ font-style : italic ;}.SYSTEM span#U.char{ text-decoration : underline ;}#PAGE1-001.page@media screen {#MAIN.win{ overflow : auto ;}}@media print {#MAIN.win{ overflow : hidden ;}}#PAGE1-001.page #MAIN.win.AGGR-BILL div#B.par{ font-family : "Arial" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : justify ; clear : both ;}.AGGR-BILL div#F.par{ font-family : "Arial" ; font-size : 8pt ; font-weight : normal ; line-height : 3.39mm ; text-decoration : none ; text-align : left ; clear : both ;}.AGGR-BILL div#L.par{ font-family : "Arial" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : left ; clear : both ;}.AGGR-BILL div#R.par{ font-family : "Arial" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : right ; clear : both ;}.AGGR-BILL a.AGGR-BILL span#H.char{ font-family : "Arial" ; font-size : 12pt ; font-weight : bold ;}.AGGR-BILL span#I.char{ font-family : "Arial" ; font-size : 12pt ; font-style : italic ;}.AGGR-BILL span#K.char{ font-family : "Arial" ; font-size : 8pt ;}.AGGR-BILL span#M.char{ font-family : "Arial" ; font-size : 10pt ;}.AGGR-BILL span#U.char{ font-family : "Arial" ; font-size : 12pt ; text-decoration : underline ;} div#PROJEKTE.tab@media screen { div#PROJEKTE.tab table.tr{ border-collapse : collapse ;}}@media print { div#PROJEKTE.tab table.tr{ border-collapse : collapse ;}}@media screen { div#PROJEKTE.tab table.tr{ margin-top : -1px ;}}@media print { div#PROJEKTE.tab table.tr{ margin-top : 0px ;}} div#PROJEKTE.tab table.tr div#PROJEKTE.tab .topline{ border-top : 1pt solid black ;} div#PROJEKTE.tab .bottomline{ border-bottom : 1pt solid black ;} div#PROJEKTE.tab .leftline{ border-left : 1pt solid black ;} div#PROJEKTE.tab .rightline{ border-right : 1pt solid black ;}#PROJEKTE.tab #sf--LTYPE1.tr td#C1
and here comes the email's body: bla,bla,bla... bla.
Do you have any idea how can I solve the problem with the css file? Any suggestion is welcome!
Regards,
Jaime

I just solved the problem by activating the service /SAP/BC/BSP/SAP/smart_forms/ through the transaction SICF. So I close the thread!
Jaime

Freeze Spreadsheet header in Web Analysis Report (HTML format)

Hello,
I want to know if there is any way to freeze the spreadsheet header in Web Analysis. I know it can be done if the report is opened through Web Analysis Studio. However, when the user opens it in HTML format, the header will not be freeze.
We are using 9.3.1
Thanks,
Andy
Edited by: user642800 on Jun 4, 2009 1:22 PM

I don't believe you can do this. We ran into the same issue last summer and it left our long scrolling dashboards useless as you couldn't see what row you were looking at once the row headers had left the screen. We talked about having some dashboards launch from workspace and others from Web Analysis but this was messy and we wanted them to one-stop shop in Workspace.
The answer for us was to put a Check Box on the right hand side and the users only select the amount of members that fill up their screen. For instance, if we had 20 columns of data (accounts or scenarios) and only 5 were visible at one time, they would only select 5 to view at any given time.
As far as column headers, we haven't had any complaints when those leave the screen.
This was a huge issue for us but luckily we came up with a workaround that seems to have worked for all of our users thus far.
Mike

Can I force mail to be sent in HTML format (ActiveSync, EX2010)

We use a corporate disclaimer, signature, logo at the end of all our emails, but when emails are sent via iPhone, the recipient only receives a "?" in place of the signature.
I'm assuming this is due to the message being sent out in either Rich Text or Plain Text.
Is there a way for me to have our corporate owned iPhones send messages in HTML so that this signature will appear in all outgoing email? I have set my ActiveSync rules to allow HTML, but I'm thinking that is only for incoming, since this isn't working for me.
I appreciate your help in advance.

We are facing the same issue. We have a transport rule that grabs the user's info out of Active Directory and populates the fields we tell it to and then adds an image of our company logo at the bottom. We have looked at how other companies have done it and it seems like they are attaching several images to each message. I would rather avoid that kind of overhead.
The signature works fine in Outlook, but when Apple users send a message, the link for the image shows up as a link instead of the image. If you use any html formatting in the email, it gets sent as html and the signature shows up fine. I tested this by just changing some text to bold. Several of our execs use iPhones and Macs and asking them to do this just to 'trick' it into html format isn't going to work.

Scheduling deski report to html format fails

We're running boxi 3.1 SP4 on a Linux redhat machine. When scheduling a deski report to html format to unmanaged disk, the report stays in processing state for 10 minutes and then it goes to failed state with error "Object failed to run due to an error while processing on the Job Server" . Additionally I get the message "The scheduler component failed the object identified by <jobnumber>. The job associated with the object was unresponsive."
Scheduling to other formats works fine. I have tracing on but there's not any hint in the logfiles. The htm file and it's subdirectories are created on the temporary location /data/procSched/<name>.DesktopIntelligenceJobServer but it's not copied to the configured destination. It is not an issue with permissions, the server has write permissions to the directory.

Hi Clive,
since your are in XI R2 you can only try to modify the layout of your report. In XI 3.x a new feauture was introduced, which allows the user to choose between keeping the layout or facilitating further processing in Excel when exporting a document in Excel.
Regards,
Stratos

Impossible to send a mail with a message in HTML format

Hi
I try to send a message in HTML format. Here is the code :
    public void sendMessage(String subject, String message, String to, String cc, String bcc) throws MessagingException {
         MimeMessage mimeMessage = mailSender.createMimeMessage();
         MimeMessageHelper mimeMessageHelper = new MimeMessageHelper(mimeMessage, true, "UTF-8");
        if(to!=null && !to.equals("")){
             mimeMessageHelper.setTo(to);
        if(cc!=null && !cc.equals("")){
             mimeMessageHelper.setCc(cc);
        if(bcc!=null && !bcc.equals("")){
             mimeMessageHelper.setBcc(bcc);
        mimeMessageHelper.setSubject(subject);
        mimeMessageHelper.setText(message,true);
        mimeMessageHelper.setFrom(from);
        logger.info("host = "+mailSender.getHost());
        logger.info("Port = "+mailSender.getPort());
        //logger.info("UserName = "+mailSender.getUsername());
        //logger.info("Password = "+mailSender.getPassword());
            mailSender.send(mimeMessage);
    }and the message is the following :
String message = "<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.0 Transitional//EN\" \"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd\">"+ "<htmlxmlns=\"http://www.w3.org/1999/xhtml\"><head><head/><body>"
+messageSource.getMessage("startpeople.messagetosend.part1", null, Locale.ENGLISH)+ user.getFirstName()+" "+ user.getLastName()+",\n"
+ messageSource.getMessage("startpeople.messagetosend.part2", null, Locale.ENGLISH)+"\n"
+ messageSource.getMessage("startpeople.messagetosend.part3", null, Locale.ENGLISH)+ newPassword+"\n"
+ messageSource.getMessage("startpeople.messagetosend.part4", null, Locale.ENGLISH)+"\n"
+ messageSource.getMessage("startpeople.messagetosend.part5", null, Locale.ENGLISH)+"\n"
+ messageSource.getMessage("startpeople.securim.homepage.internet.address", null, Locale.ENGLISH)+"</body></html>";according to what I found on internet, the method MimeMessageHelper.setText(message,true); specifies that the message is sent in HTML format ( second argument is boolean "true" saying it is a HTML message ).
But I don't get the message in HTML format. Anyone can help me ? thank you in advance

MimeMessageHelper appears to be a Spring Framework class; better to ask your
question in their support forum.
Of course, you don't need to use MimeMessageHelper to create a simple html message,
and in your case it doesn't seem to be making things any simpler. See the JavaMail FAQ
and the demo programs included with JavaMail for simple examples of how to create an
html message.

How to SEND HTML formatted mail??

How do I put HTML formatted text into an email I want to SEND? -- "Paste as HTML" in edit menu is dimmed, and I can't get it to un-dim... I want to paste formatted text from an HTML editor into an email... can I do this with Mail, or do I need some other app to do this?

AHHHH
What you can do to make HTML for Apple Mail is to make it in an HTML editor, open it with Safari use CMD+i - a new mail message will appear in a moment with the web page in the email body.
You can't do any major editing in Mail, you'll have to go back to the HTML file. But it works.
You can also use Copy (from a web page) and then (Edit) Paste as HTML (that what Paste as HTML is for, not for creating HTML email). You can also user Paste as HTML to copy/paste a HTML email you receive or part of a HTML email.

User Guides in HTML format

Similar Messages

Maybe you are looking for