User has no authorization for function group SWRS

Dear SRM Gurus,
We are facing an issue u201CUser has no authorization for function group SWRSu201D.
Hope the user has no authorization to access function group SWRS and this function group is saying that workflow substitution.
Can you any one have any idea what scenario are we using Workflow substitution?
Is there any Roles need to be assigned?
I would be appreciating if you could let us know more detail on this.
Thanks.
Regards,
Magesh Basavaraj.

Hi,
The authorization object is 'S_WF_SUBST' for substitute role..try to assign this object and check..
Saravanan

Similar Messages

User has no authorization for Function group SYST

Hi,
We are starting to make customisation to B2B application. I have just created a new project for B2B_XXXX application and deployed it on the server. When I run this custom application, I am not able to login using the same user that is working fine for the standard B2B application.
Following is the error I am getting
ERROR 1 - RFC_ERROR_LOGON_FAILURE: User INTUSER05 has no RFC authorization for function group SYST
ERROR 2- The application was not able to switch to a stateful connection......
Strange thing is that the same user works very well for standard B2B.
Any clue? All I have done is created a CUSTCRMPRJ for B2B ERP (SHRWEB, SHRAPP). Please help.
Best regards,
-Tarun
Edited by: Tarun Bakshi on Nov 10, 2011 7:37 PM

Hi Shanto,
The problem is still occuring. Even If I give s_rfc authorisation the order is not being created.
I compared the source code for b2b and b2b_custom application, I have pasted below the component info
sap.com      CORE-TOOLS      7.00 SP14 (1000.7.00.14.0.20071210170909)      SAP AG      SAP AG      20080125132852
sap.com      SAP_JTECHF      7.00 SP14 (1000.7.00.14.0.20071210172424)      SAP AG      SAP AG      20080125132853
sap.com      BASETABLES      7.00 SP14 (1000.7.00.14.0.20071210170411)      SAP AG      SAP AG      20080125132853
sap.com      SAP-JEECOR      7.00 SP14 (1000.7.00.14.0.20071210172300)      SAP AG      SAP AG      20080125132852
sap.com      JLOGVIEW      7.00 SP14 (1000.7.00.14.0.20071210160700)      SAP AG      SAP AG      20080125132853
sap.com      SAP-JEE      7.00 SP14 (1000.7.00.14.0.20071210172039)      SAP AG      SAP AG      20080125132853
sap.com      SAP_JTECHS      7.00 SP14 (1000.7.00.14.0.20071210172719)      SAP AG      SAP AG      20080125133813
sap.com      BI_UDI      7.00 SP14 (1000.7.00.14.0.20071210170522)      SAP AG      SAP AG      20080125133909
sap.com      BI_MMR      7.00 SP14 (1000.7.00.14.0.20071210170459)      SAP AG      SAP AG      20080125133230
sap.com      UMEADMIN      7.00 SP14 (1000.7.00.14.0.20071210164800)      SAP AG      MAIN_APL70VAL_C      20080125140341
sap.com      LM-TOOLS      7.00 SP14 (1000.7.00.14.1.20080124101556)      SAP AG      MAIN_APL70P14_C      20080125134809
sap.com      SAP-SHRWEB      6.0 SP0 (1000.6.0.0.2.20080129095806)      SAP AG      MAIN_CRM70PAT_C      20110608153828
sap.com      SAP-SHRAPP      6.0 SP0 (1000.6.0.0.2.20080128172843)      SAP AG      MAIN_CRM70PAT_C      20110608154506
b2b_custom application has been created by using code from the following SCs that were added to the track
SAPSHRWEB10_7-20003522.SCA
SAPSHRAPP10_7-20003520.SCA
SAPCRMWEB10_7-20003518.SCA
SAPCRMAPP10_7-20003516.SCA
SAPCRMDIC10_0-20003519.SCA
STRUTS01_0-10003646.SCA
SAPIPCMSA10_0-20003515.SCA
SAPCRMJAV10_7-20003517.SCA
SAPSHRJAV10_7-20003521.SCA
TEALEAF00_0-20001451.SCA
SAPBUILDT14_0-10003479.SCA
Any help would be great...

User has no authorisation for function group SYST?

Hi All,
I was trying to open Bex Analyzer in BI 7.0.
I am getting the error as mentioned below:
"User has no authorisation for function group SYST".
Why is it so.
Please reply.
Thanks in Advance.

Unless you have full authorizations (SAP_ALL / SAP_NEW) you have to grant authorizations for each activity.
With PFCG, add the following RFC on Authorization Object S_RFC:
RFC1
RS*
SDIFRUNTIME
SYST
SYSU
Hope it helps
GFV

IDOC Scenario - User has no RFC authorization for function group EDIN

Hi all,
I'm trying to configure an IDOC scenario from ECC to XI.
RFC's, ports and destinations already configured. On WE19 I'm creating an IDOC for testing the scenario. The IDOC is sent successfully, and it stops on TRFC Monitor with error "User PIRFCUSER has no RFC authorization for function group EDIN." .
Some of you knows what authorization is needed? Basis team said the roles are the same at DEV environment, and there this scenario works fine.
Thanks for your help.
regards.
Roberti

Hi,
Check with PIRFCUSER user , that is having the right authorization or not ..
And make sure that this user is present in the system & it should not locked.
to check that user is present or not-----goto su01 of the system & check
Regards
Seshagiri

UWL : User J2EE_ADMIN has no RFC authorization for function group SYST

Dear All,
When I am trying to register the system in universal Worklist Administration, It gives the following error,
System <>: Fri Jul 11 18:58:11 IST 2008
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorExc eption:Fri Jul 11 18:58:11 IST 2008
(Connector) :com.sap.mw.jco.JCO$Exception:User J2EE_ADMIN has no RFC authorization for function group SYST.
I have tried by giving the role SAP_ALL to J2EE_ADMIN , then also i am getting the same error. Can anybody through some light on this....
Helpful tips will be rewarded...
Sanoj

Sanoj,
check these threads
https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5489621
https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5267551
https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5636365
reward points if helpful

QM-IDI : User QMIDI has no RFC authorization for function group QIRF

Hi,
I am in the process of trying to connect from Labware LIMS to SAP ECC 6, specifically the quality module. The aim is to use Labware to connect to SAP via the QM-IDI interface to
1) Download inspection lots from SAP
2) Upload usage decisions and inspection lot results to SAP.
Initially I specified an account on SAP of the type 'Communications Data', however any time I tried to connect to SAP from LIMS via the interface with this account it gives an <i>'Incorrect Username/Password'</i> error in the trace logs. I then changed the account to a dialog user, which seems to be partially more successful, however the trace logs captures the following error 'User QMIDI has no RFC authorization for function group QIRF' when I try to connect from LIMS to SAP via the QM-IDI interface after changing the user to type dialog.
I would appreciate any guidance on how to resolve this issue.
Regards.

i got stuck on configuring idi. plz guide me. bond_chaitu at yahoo dot com

UWL: User MSSNO1 has No rfc authorization for function group SWK1

Dear all,
We have just recently upgrade our support pack and the UWL in the portal is not working anymore. It throw an error message when we click on the work item.
(connector): com.sap.mw.jco.JCOSE Exception:User MSSNO1 has No rfc authorization for function group SWK1
Anyone know how to fix this?
I am not too sure about the authorization part. Can someone guide me please?
Thanks.
Regards,
Bryan.

Hi Brain,
Pls check this thread for solution
Re: UWL and function group swk1
Regards,
Harini S

User PI_JCO_RFC has no RFC authorization for function group ERFC

I am doing IDOC-File scenario between newly installed PI and ECC 6.0 systems.
I have done all the configurations on XI and R/3 end.
When I TEST to send an IDOC from WE19, I could do it successfully and the status is 03 in we02.
But when I go and check SM58, I get the said error: User PI_JCO_RFC has no RFC authorization for function group ERFC.
From that I understand RFC in R/3 end require some authorizations. Am I right? If so, what objects need to be added my user role?
Please advise.
Thanks
Shiva

Hi,
Try to add the following authorization object to the role(s) of the RFC user:
S_RFC
Set the following authorizations:
RFC_TYPE = FUGR (function group)
RFC_NAME = <name of the function group containing the BAPI>
ACTVT = 16 (execute)
Regards
Seshagiri

User SIMPCDIA has no RFC authorization for function group BBPC

Hello all, I am working with SRM 7.0 and when I try to list all account values in the corresponding matchcode, I have this error message:
User SIMPCDIA has no RFC authorization for function group BBPC
User SIMPCDIA is a dialog user created in backend system with authorization objetc S_RFC. I don´t know what is the problem...
Can you help me please?
Thanks in advance
Rosa Rodríguez

Try testing with a user that has the 'SAP_ALL' profile
OR
see if below link is helpful to you.
[Probable Solution|http://www.sapkb.com/question.php?ID=10]
Edited by: Saurabh Agarwal on Sep 1, 2010 11:59 AM

User SAAPOS has no RFC authorization for function group SYST

Dear Experts ,
I am facing this issue kindly help me to sort out this issue.
User SAAPOS has no RFC authorization for function group SYST
Thanks in advance
Thanks & Regards,
Srinivasan.V
Moderator message: please search for available information and previous discussions.
Edited by: Thomas Zloch on Sep 12, 2011 10:17 AM

Hi,
try SU53 to get more information about missing authority of user SAAPOS.
Regards, Dieter

User CRYSTAL has no RFC authorization for function group BDL5

I am getting this error. Can anybody help.
T:40527 Error in program 'boe_cmsd': ======> User CRYSTAL has no RFC authorization for function group BDL5.
T:40527 Error in program 'boe_cmsd': <* RfcReceive [3] : returns 3:RFC_SYS_EXCEPTION
T:40527 Error in program 'boe_cmsd': <* RfcCallReceive [3] : returns 3:RFC_SYS_EXCEPTION

Please post this query to the Business Objects Enterprise Administration forum:
BI Platform
That forum is monitored by qualified technicians and you will get a faster response there.
Thank you for your understanding,
Ludek
Edited by: Ludek Uher on Sep 29, 2008 8:38 PM

User abcd has no RFC authorization for function group SYST

hi,
We are trying to http<>XI<>RFC scenario.
When we are sending request from http to xI.
We got the followin response.
<b>"User abcd has no RFC authorization for function group SYST"</b>
Kindly let me know what authorization to be given to the user abcd.
Regards,
Nishita

you need to give that user auth. object S_RFC for FUGR SYST and activity *.
You can double check in transaction SU53 of the target system which check failed for the respective user. There it should show the auth. object mentioned above.
Regards
Christine

User SAPCPIC1 has no RFC authorization for function group SYST

Hi,
The id SAPCPIC1is getting error "user has no RFC authorization for function group SYST"
Please guide.
Regards,
Visshwas

Hi Visshwas,
Look like user SAPCPIC1 does not have enough authorization,Assaign the same.
Regards
Ashok Dalai

UWL:User has no RFC authorization for function group SDIFRUNTIME .

Hi,
In portal, while registering the system in UWL , I am getting this error:
(Connector) :com.sap.mw.jco.JCO$Exception:User <userid> has no RFC authorization for function group SDIFRUNTIME .
I have given the permission to the user id as owner for the system, with which I am logged in, and registering the system.
It is also confirmed, that in the backend, the same user has authorization for the said RFC.
Please help as it is urgent.
Thanks,
Sonali
Edited by: Sonali M S on May 30, 2008 6:32 AM

Hi Sonali,
If your component is a webdynpro component, back end system is accessed via a logical system / JCO Destination. User id ( Lets say JCOUSER) and password is given for accessing backend via this JCO connection. This user id is different from particular user's backend user id. Verify whether JCOUSER has required authorizations in backend.
I hope it helps.
Regards,
Uday.

User has no RFC authorization for function group.

Hi expert,
I am calling a new function module from the WebDynpro Java that is causing an issue that User has no RFC authorization for function group. if the user doesnt have proper authorization like SE37 Transactions Code and others.
But there is some more existing function module in the same application that is working fine without having above issues with same access.
I am passing the USERID as input in the function Module and execute simply.
So can you please tell me the Way to handle it?
I will really appreciate your answer.
Thanks
Ali

Hi Rali,
I think,there is problem with ur JCO connection..
Please check the following steps -
1. Go to transaction SM59.
2. Choose Create.
3. Enter the following:
RFC destination: SAPSLDAPI
Connection type: T (Start an external program via TCP/IP).
4. Choose Enter.
5. Choose Technical settings and specify the following data:
a. Select Registered Server Program as the activation type.
b. Enter the program ID of the SAP J2EE Engine that acts as the RFC server. Enter SAPSLD_xyz (xyz is the SID of SAP J2EE Engine Server.)
c. Enter the gateway host and the gateway service of R/3 server
d. If the system is a Unicode system, navigate to Special Options and select the option
Non-Unicode or Unicode in the section Character Width in Target System according to the gateway
server.
6. Save your entries.
Now
1. Go transaction SLDAPICUST.
2. Switch to editing mode and choose Insert Row. Specify the connection parameters of the J2ee server ,
Host name, port Number, user and password - and set this SLD server as Primary.
Only the entry marked as Primary is active.
Please check whether there is entryof r/3 server in the j2ee server /etc/services folder.If no entry is there then add -
R/3server port/TCP
in the service file.
Please check the r/3server service folder and host folder - do they have entry of java server, if no add the entry in the same way as done above for j2ee server.
Also check the Group ,that u have entered for r/3 server in SLD exist in R/3 server or not if not add it....
I hope this will help you ...
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Thanks,
Gunja
Edited by: Armin Reichert on Apr 26, 2008 6:35 PM

User has no authorization for function group SWRS

Similar Messages

Maybe you are looking for