User has no RFC authorization for fun ction group EDIN
Problem
Posted: Aug 11, 2005 1:57 AM Reply E-mail this post
Hi all
I am trying to send idocs from R/3 to R/3.
In WE05 I can see STATUS 3 for the test IDOCS Iam sending through WE19.
But in SM58 I am seeing the following error.
User <username> has no RFC authorization for fun ction group EDIN .
Could somebody suggest me a way to solve this problem.
Thankyou
I think you need to have S_TRANS_RFC authorisation.
OR
In the profile, you need to add the function group.
Sorry I do not remember the profile name.
Message was edited by: Vinod C
Similar Messages
-
User has no RFC authorization for function group.
Hi expert,
I am calling a new function module from the WebDynpro Java that is causing an issue that User has no RFC authorization for function group. if the user doesnt have proper authorization like SE37 Transactions Code and others.
But there is some more existing function module in the same application that is working fine without having above issues with same access.
I am passing the USERID as input in the function Module and execute simply.
So can you please tell me the Way to handle it?
I will really appreciate your answer.
Thanks
AliHi Rali,
I think,there is problem with ur JCO connection..
Please check the following steps -
1. Go to transaction SM59.
2. Choose Create.
3. Enter the following:
RFC destination: SAPSLDAPI
Connection type: T (Start an external program via TCP/IP).
4. Choose Enter.
5. Choose Technical settings and specify the following data:
a. Select Registered Server Program as the activation type.
b. Enter the program ID of the SAP J2EE Engine that acts as the RFC server. Enter SAPSLD_xyz (xyz is the SID of SAP J2EE Engine Server.)
c. Enter the gateway host and the gateway service of R/3 server
d. If the system is a Unicode system, navigate to Special Options and select the option
Non-Unicode or Unicode in the section Character Width in Target System according to the gateway
server.
6. Save your entries.
Now
1. Go transaction SLDAPICUST.
2. Switch to editing mode and choose Insert Row. Specify the connection parameters of the J2ee server ,
Host name, port Number, user and password - and set this SLD server as Primary.
Only the entry marked as Primary is active.
Please check whether there is entryof r/3 server in the j2ee server /etc/services folder.If no entry is there then add -
R/3server port/TCP
in the service file.
Please check the r/3server service folder and host folder - do they have entry of java server, if no add the entry in the same way as done above for j2ee server.
Also check the Group ,that u have entered for r/3 server in SLD exist in R/3 server or not if not add it....
I hope this will help you ...
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Thanks,
Gunja
Edited by: Armin Reichert on Apr 26, 2008 6:35 PM -
IDOC Scenario - User has no RFC authorization for function group EDIN
Hi all,
I'm trying to configure an IDOC scenario from ECC to XI.
RFC's, ports and destinations already configured. On WE19 I'm creating an IDOC for testing the scenario. The IDOC is sent successfully, and it stops on TRFC Monitor with error "User PIRFCUSER has no RFC authorization for function group EDIN." .
Some of you knows what authorization is needed? Basis team said the roles are the same at DEV environment, and there this scenario works fine.
Thanks for your help.
regards.
RobertiHi,
Check with PIRFCUSER user , that is having the right authorization or not ..
And make sure that this user is present in the system & it should not locked.
to check that user is present or not-----goto su01 of the system & check
Regards
Seshagiri -
UWL:User has no RFC authorization for function group SDIFRUNTIME .
Hi,
In portal, while registering the system in UWL , I am getting this error:
(Connector) :com.sap.mw.jco.JCO$Exception:User <userid> has no RFC authorization for function group SDIFRUNTIME .
I have given the permission to the user id as owner for the system, with which I am logged in, and registering the system.
It is also confirmed, that in the backend, the same user has authorization for the said RFC.
Please help as it is urgent.
Thanks,
Sonali
Edited by: Sonali M S on May 30, 2008 6:32 AMHi Sonali,
If your component is a webdynpro component, back end system is accessed via a logical system / JCO Destination. User id ( Lets say JCOUSER) and password is given for accessing backend via this JCO connection. This user id is different from particular user's backend user id. Verify whether JCOUSER has required authorizations in backend.
I hope it helps.
Regards,
Uday. -
User has no RFC authorization for function group SYST
Hello Experts,
I have created one user in portal and given role which is also created by me. Role will give access to iview which consists of list WAD report link. User can access report by clicking external link.
When i have given that role to my user id it's running fine when I gave to another end user id then it is giving error no access to report " report name". For this i have created one role for this report in ABAP and assigned to user, then also it's giving error. I have assigne profile S_BW_RFC.
Can you tell me what are the authorizations/roles/profiles to be assigned to correct the error?
Thanks in advance,
VenkyHi Venky,
Sometimes creating roles is not easy if you don't know exactly whicho objects you have to include.
One useful way to design roles is to use System Trace (Transaction ST01).
1) Activate "authorization check" trace for user with full permissions to execute your process (Add user filter from ST01)
2) Execute all actions that final user should execute
3) Stop trace and evaluate all objects and values used
Add all resulting objects to your roles.
Other way is try/error: If you get a message about lack of authorization, execute transaction SU54 to see which object need to add to your role.
When changing roles, don't forget to log on again in SAP, since authorizations don't apply in real time.
Best regards,
Jorge -
User SAPCPIC1 has no RFC authorization for function group SYST
Hi,
The id SAPCPIC1is getting error "user has no RFC authorization for function group SYST"
Please guide.
Regards,
VisshwasHi Visshwas,
Look like user SAPCPIC1 does not have enough authorization,Assaign the same.
Regards
Ashok Dalai -
(104) RFC_ERROR_SYSTEM_FAILURE: User has no RFC authorization
Hello Guru's
I am getting the followong error when trying to open the BI reports.
The initial exception that caused the request to fail was:
User has no RFC authorization for function group SDIFRUNTIME.
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: User has no RFC authorization for function group SDIFRUNTIME.
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1442)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3979)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3416)
at com.sap.mw.jco.JCO$Repository.execute(JCO.java:20471)
I have no clue what is the reason I am getting the error.
Please help me out in this.
Regards,
PramodHi,
This is due to BI system authorization issues. You need to give/get proper authorizations to the BI user id with which you are connecting to back end via JCO connection. You have to assign additional roles to this user id to resolve this issue.
If you are working on client environment you have to contact back end (BI) security administrator to get more authorizations. If you provide the error message to them, they will know which role to assign.
If you are working in sandbox environment assign SAP_ALL. This will resolve the issue.
I hope it helps.. -
I E ping error: User XIRWBUSER has no RFC authorization for ...
Hi all,
In the RWB->Component Monitoring when I select the
"Integration Engine" it is giving ping error and Self-Test Status errors.
Ping error: <b>User XIRWBUSER has no RFC authorization for function group CHECKRFCS</b>.
Self-Test status: <b>JCo request failed</b>.
Please help me, it is very urgent.
Thanks in advance,
Nagarjuna.Hi Nagarjuna,
Please look at these..
User abcd has no RFC authorization for function group SYST
Delta Pull Fails with Short dump in R/3 - RFC_NO_AUTHORITY
http://help.sap.com/saphelp_nw04/helpdata/en/4f/b541d812aea34695d54758cec0796f/frameset.htm
cheers,
Prashanth -
UWL : User J2EE_ADMIN has no RFC authorization for function group SYST
Dear All,
When I am trying to register the system in universal Worklist Administration, It gives the following error,
System <>: Fri Jul 11 18:58:11 IST 2008
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorExc eption:Fri Jul 11 18:58:11 IST 2008
(Connector) :com.sap.mw.jco.JCO$Exception:User J2EE_ADMIN has no RFC authorization for function group SYST.
I have tried by giving the role SAP_ALL to J2EE_ADMIN , then also i am getting the same error. Can anybody through some light on this....
Helpful tips will be rewarded...
SanojSanoj,
check these threads
https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5489621
https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5267551
https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5636365
reward points if helpful -
QM-IDI : User QMIDI has no RFC authorization for function group QIRF
Hi,
I am in the process of trying to connect from Labware LIMS to SAP ECC 6, specifically the quality module. The aim is to use Labware to connect to SAP via the QM-IDI interface to
1) Download inspection lots from SAP
2) Upload usage decisions and inspection lot results to SAP.
Initially I specified an account on SAP of the type 'Communications Data', however any time I tried to connect to SAP from LIMS via the interface with this account it gives an <i>'Incorrect Username/Password'</i> error in the trace logs. I then changed the account to a dialog user, which seems to be partially more successful, however the trace logs captures the following error 'User QMIDI has no RFC authorization for function group QIRF' when I try to connect from LIMS to SAP via the QM-IDI interface after changing the user to type dialog.
I would appreciate any guidance on how to resolve this issue.
Regards.i got stuck on configuring idi. plz guide me. bond_chaitu at yahoo dot com
-
UWL: User MSSNO1 has No rfc authorization for function group SWK1
Dear all,
We have just recently upgrade our support pack and the UWL in the portal is not working anymore. It throw an error message when we click on the work item.
(connector): com.sap.mw.jco.JCOSE Exception:User MSSNO1 has No rfc authorization for function group SWK1
Anyone know how to fix this?
I am not too sure about the authorization part. Can someone guide me please?
Thanks.
Regards,
Bryan.Hi Brain,
Pls check this thread for solution
Re: UWL and function group swk1
Regards,
Harini S -
User PI_JCO_RFC has no RFC authorization for function group ERFC
I am doing IDOC-File scenario between newly installed PI and ECC 6.0 systems.
I have done all the configurations on XI and R/3 end.
When I TEST to send an IDOC from WE19, I could do it successfully and the status is 03 in we02.
But when I go and check SM58, I get the said error: User PI_JCO_RFC has no RFC authorization for function group ERFC.
From that I understand RFC in R/3 end require some authorizations. Am I right? If so, what objects need to be added my user role?
Please advise.
Thanks
ShivaHi,
Try to add the following authorization object to the role(s) of the RFC user:
S_RFC
Set the following authorizations:
RFC_TYPE = FUGR (function group)
RFC_NAME = <name of the function group containing the BAPI>
ACTVT = 16 (execute)
Regards
Seshagiri -
User SIMPCDIA has no RFC authorization for function group BBPC
Hello all, I am working with SRM 7.0 and when I try to list all account values in the corresponding matchcode, I have this error message:
User SIMPCDIA has no RFC authorization for function group BBPC
User SIMPCDIA is a dialog user created in backend system with authorization objetc S_RFC. I don´t know what is the problem...
Can you help me please?
Thanks in advance
Rosa RodríguezTry testing with a user that has the 'SAP_ALL' profile
OR
see if below link is helpful to you.
[Probable Solution|http://www.sapkb.com/question.php?ID=10]
Edited by: Saurabh Agarwal on Sep 1, 2010 11:59 AM -
User SAAPOS has no RFC authorization for function group SYST
Dear Experts ,
I am facing this issue kindly help me to sort out this issue.
User SAAPOS has no RFC authorization for function group SYST
Thanks in advance
Thanks & Regards,
Srinivasan.V
Moderator message: please search for available information and previous discussions.
Edited by: Thomas Zloch on Sep 12, 2011 10:17 AMHi,
try SU53 to get more information about missing authority of user SAAPOS.
Regards, Dieter -
User CRYSTAL has no RFC authorization for function group BDL5
I am getting this error. Can anybody help.
T:40527 Error in program 'boe_cmsd': ======> User CRYSTAL has no RFC authorization for function group BDL5.
T:40527 Error in program 'boe_cmsd': <* RfcReceive [3] : returns 3:RFC_SYS_EXCEPTION
T:40527 Error in program 'boe_cmsd': <* RfcCallReceive [3] : returns 3:RFC_SYS_EXCEPTIONPlease post this query to the Business Objects Enterprise Administration forum:
BI Platform
That forum is monitored by qualified technicians and you will get a faster response there.
Thank you for your understanding,
Ludek
Edited by: Ludek Uher on Sep 29, 2008 8:38 PM
Maybe you are looking for
-
Java.nio Selector registration
Dear everybody, can you help me to figure out this? Case: - open new Selector object Selector selector = Selector.open(); - registering channels to the selector: ServerSocketChannel chn1, chn2; chn1.register(selector, SelectionKey.OP_ACCEPT); chn2.re
-
Asset Super Class and Asset Super Number
Hi Gurus. Please tell me how can we use Asset Super Number. What is the use of Asset Suer Number and Asset Super Class Thank You
-
Define shipping data for Plants (STO)
Hello! Could someone could help with advice: how to set up shipping data for Retail plant.. It is not possible to add new values in IMG --> Set up stock transport order --> Define shipping data for plants. How can I add retail plant in this activity?
-
Updating content on return from the portlet edit URI
I have written a portlet with a pageflow content URI and a pageflow edit URI. The content URI pageflow displays some formatted data obtained from a combination of portlet preferences and database records. The edit URI pageflow allows the user to add
-
My new Ipad2 got connected to my home wi-fi and to the network. For 2 days evrything qored well. Then though Ipad2 was connected to wi-fi, it did not open the web page/s. The dialogue box read, `Data Roaming is turned off. You can enable Data Roaming