$USER_HOME variable not working in Java7u55 deployment.properties file.
I'm trying to setup a separate cache directory for an AppV Java 7u55 package. In the deployment.properties file I created the following entry:
deployment.user.cachedir=$USER_HOME\\AppData\\LocalLow\\Sun\\Java\\Deployment\\Java7cache
But upon initiating an application I do not see the folder created and populated with cache data. This is what I see in the Java7 control panel for the cache path after my edit:
My question, is $USER_HOME still a valid variable for use in the deployment.properties file and if so what is the path that it points to?
UPDATE: So I did find where at least for me this path led to on my desktop a directory called $USER_HOME was created with the rest of the above location following it. Is this correct?
How can I my current setup deployment.user.cachedir=$USER_HOME to go to this location: C:\users\<user account>\AppData\LocalLow\Sun\Java\Deployment\Java7cache\ ???
I don't have an answer to the problem, but I am having problems with the system level deployment.properties file and IE9 on Windows 7 32/64bit.
Starting with version 13, the IE plugin seems to igonore the system level deployment.properties file in favor of the user level deployment.properties file. When I open the Java Control Panel, the settings are correct per the system deployment.properties file. Currently to get the Java Plugin to work reliably in IE9 I have to set the following:
_JAVA_OPTIONS = -Djava.net.preferIPv4Stack=true
Disable caching
Set the proxy to Direct Connection.
If I set the _JAVA_OPTIONS as an environment variable and the other two in the system deployment.properties file, Firefox works fine, but IE wont load either of the Java tests. If I removed the system deployment.properties files and configure the user deployment.properties file, both IE and Firefox work fine.
I find it interesting that if I set the configuration through the control panel, then apply the system deployment.propteries file, the user deployment.properties file reverts to defaults when the system file is removed.
Similar Messages
-
JRE7Update25 Deployment Properties File Not Working And Cant Disable Next Gen Plugin
Good Day
Our organisation needs to deploy JRE7U25 to over 4000 workstations. Our desktops are running the following Windows and IE combinations:
WinXP 32 Bit/IE7
WinXP 32 Bit/IE8
Win7 32 Bit/IE8
Win7 32 Bit/IE9
Win7 64 Bit/IE8
Win7 64 Bit/IE8
We use the 32bit JRE installer across all environments and all IE browsers use 32Bit IE. On all of our environments the Deployment.properties and config files no longer work due to what appears to be a bug in the JRE7U25 installer. Our deployment files are as follows:
Deployment.config
deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
deployment.system.config.mandatory=true
Deployment.properties
deployment.security.level=MEDIUM
deployment.security.level.locked=
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
deployment.security.mixcode=HIDE_RUN
deployment.security.mixcode.locked=
deployment.console.startup.mode=HIDE
deployment.console.startup.mode.locked=
Both files are being copied to the following location:
C:\Windows\Sun\Java\Deployment
After the installer runs and deployment files are copied to the workstation the deployment.properties and config files look like this:
Deployment.config
deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
deployment.system.config.mandatory=true
Deployment.properties
#System Deployment Properties
#Mon Jul 01 12:29:20 CAT 2013
deployment.security.level=MEDIUM
I have tried changing the deployment.config file as follows in an attempt to fix this to no avail:
1. deployment.system.config=C:\\WINDOWS\\Sun\\Java\\Deployment\\deployment.properties
deployment.system.config.mandatory=true
2. deployment.system.config=C:\\WINDOWS\\Sun\\Java\\Deployment\\deployment.properties
deployment.system.config.mandatory=false
3. deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
deployment.system.config.mandatory=true
4. deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
deployment.system.config.mandatory=false
5. deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
None of the above mentioned works. So all our required settings in the deployment.properties file are being overwritten when opening the Java console? Our other major problem is that Changing the registry key to 0 in order to disable the next generation plugin does not disable the next generation plugin in Jre at the usual location as it worked for us machine wide (across multiple profiles for JRE6U29):
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-in\10.25.2]
"UseNewJavaPlugin"=dword:00000000
^^I have observed on a fresh install of JRE7U25 that the above mentioned registry key no longer exists in this version so a computer wide disablement of this option is no longer possible via the registry.
On our 32Bit and 64bit machines running the 32 bit JRE 7U25 client when we disable the next generation plugin it keeps enabling itself again. Even when we run the javacpl.exe to run as administrator by changing the compatibility settings and disabling the next generation plugin it enables itself again. This is a huge problem for us because our company Oracle web based applications need this plugin to be disabled in order to run the apps properly.
These are major obstacles for our deployment as we desperately require assistance or any advice in addressing these issues as there appear to be numerous bugs with the JRE7U25 release. Thank you in advance.
Update 7 July 2013:
I have observed that if you have the following options in your Deployment.config file it doesn't allow our java webstart apps which use jnlp extensions to run.
1. deployment.system.config=C:\\WINDOWS\\Sun\\Java\\Deployment\\deployment.properties
deployment.system.config.mandatory=true
2. deployment.system.config=C:\\WINDOWS\\Sun\\Java\\Deployment\\deployment.properties
deployment.system.config.mandatory=false
3. deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
deployment.system.config.mandatory=true
4. deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
deployment.system.config.mandatory=false
The jnlp file association is also broken on Windows XP workstations with JRE7U25. We are having to manually associate the .jnlp file extension with javaws.exe on workstation for Web start apps or else users cannot lauch JRE whn clicking on .jnlp links.
The only Deployment.config syntax which allows our Webstart applications to run is as follows:
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
What a mess!I don't have an answer to the problem, but I am having problems with the system level deployment.properties file and IE9 on Windows 7 32/64bit.
Starting with version 13, the IE plugin seems to igonore the system level deployment.properties file in favor of the user level deployment.properties file. When I open the Java Control Panel, the settings are correct per the system deployment.properties file. Currently to get the Java Plugin to work reliably in IE9 I have to set the following:
_JAVA_OPTIONS = -Djava.net.preferIPv4Stack=true
Disable caching
Set the proxy to Direct Connection.
If I set the _JAVA_OPTIONS as an environment variable and the other two in the system deployment.properties file, Firefox works fine, but IE wont load either of the Java tests. If I removed the system deployment.properties files and configure the user deployment.properties file, both IE and Firefox work fine.
I find it interesting that if I set the configuration through the control panel, then apply the system deployment.propteries file, the user deployment.properties file reverts to defaults when the system file is removed. -
Hello ,
am using shared variable from opc client in labview when am run a exe file at development system its working fine but when am running it in deployment system its not working am using same configuration file in opc server at development and deployment system error -1950679034 (0x8BBB0006) (Warning)First Root cause needs to be identified before any actions.
I would suggest first check if you can access the shared variable hosted in PC from RT using other ways like using SVE API (Logos and PS protocols, Datasocket etc..)
Check if antivirus or firewall is playing...
Check the same experiment with some other PC if you can.
You can also try creating another Shared Variable in RT and binding the same to the PC and try to access it...
Since you have did all the reinstallations already
Best Regards,
Vijay. -
this photo illustrate how that (Substitution Variables) not working in "SQL Developer" Environment :-
http://www.imagehosting.com/show.php/1555180_ddddd.PNG.html
any solve for this problem ?????!!!!!!!!!!There is a dedicated forum for SQL Developer related questions
SQL Developer
I should admit however, that query you have provided ( with substitution variables) works like a charme in my environment (SQL Developer 1.1.0.23 build 23.64)
Best regards
Maxim -
Hi all,
I've been trying to use Profile Manager to specify user e-mail accounts on Mac devices (eg, MacBooks) but I've been encountering a couple of problems. I've tried searching around and didn't find any answers.
First of all I'm running the latest Mountain Lion Sever. All clients have up-to-date Mountain Lion too.
Problem 1: Payload variables not working
I'd like to automatically setup Gmails on the MacBooks. Now the users' email addresses are already set to their gmail accounts. So all I have to be able to do is use the %email% payload variable as the username when I go set up the (IMAP) mail accounts in the Profile Manager. However, when I download the profile to the device, it does not convert the payload variable; ie, it tries to log into gmail with the username '%email%'. Other payload variables do not work either.
Oddly enough, the payload variables work as they should with iOS devices...
Problem 2: Profiles stuck on 'Sending'
After enrolling the devices, it seems a hit and miss whether the MacBook downloads the correct profiles from the server... Is there a way to force on the MacBook to update/refresh its profiles? Also, when I update profiles within Profile Manager, the changes are pushed to iOS devices fine but not to MacBooks. Those tasks are all stuck on Sending... Logging in, restarting etc. sometimes helps but not always... Is there a reason why?
Thanks in advance.
P.S. Sorry I posted in the wrong forum first...Same problem here. Some profiles are being sent, some are stuck on the server. I have no idea why this difference.
Any luck solving the issue? -
Payload variables not working & Profiles stuck on 'Sending'
Hi all,
I've been trying to use Profile Manager to specify user e-mail accounts on Mac devices (eg, MacBooks) but I've been encountering a couple of problems. I've tried searching around and didn't find any answers.
First of all I'm running the latest Mountain Lion Sever. All clients have up-to-date Mountain Lion too.
Problem 1: Payload variables not working
I'd like to automatically setup Gmails on the MacBooks. Now the users' email addresses are already set to their gmail accounts. So all I have to be able to do is use the %email% payload variable as the username when I go set up the (IMAP) mail accounts in the Profile Manager. However, when I download the profile to the device, it does not convert the payload variable; ie, it tries to log into gmail with the username '%email%'. Other payload variables do not work either.
Oddly enough, the payload variables work as they should with iOS devices...
Problem 2: Profiles stuck on 'Sending'
After enrolling the devices, it seems a hit and miss whether the MacBook downloads the correct profiles from the server... Is there a way to force on the MacBook to update/refresh its profiles? Also, when I update profiles within Profile Manager, the changes are pushed to iOS devices fine but not to MacBooks. Those tasks are all stuck on Sending... Logging in, restarting etc. sometimes helps but not always... Is there a reason why?
Thanks in advance.Same problem here. Some profiles are being sent, some are stuck on the server. I have no idea why this difference.
Any luck solving the issue? -
JRE run-time arguments in deployment.properties file all versions of PlugIn
G'day,
A user can specify the run-time arguments for the JRE via the Java Plug-In's control panel. This results in a (property, value) pair being written to the user's deployment.properties file. I'm trying to compile a list of the property names used by various versions of the Plug-In. Here's what I have so far:
1.4.2_*
javaplugin.jre.params
i.e. one set of run-time arguments for all JREs known to the plug-in.
1.5.0_*
deployment.javapi.jre.V.args
where V is a JRE version number, e.g. 1.5.0_16, i.e. custom run-time arguments for all JREs known to the plug-in.
1.6.0_00 .. _07 ("classic")
deployment.javapi.jre.V.args
where V is a JRE version number, e.g. 1.6.0_07, i.e. custom run-time arguments for all JREs known to the plug-in.
1.6.0_10 .. ("next generation")
deployment.javaws.jre.N.args
where N is an index into the list of JREs known to the plug-in, i.e. custom run-time arguments for all JREs known to the plug-in.
These have been determined by sampling a couple of updates for each of the X.Y.Z versions listed above, i.e. not an exhaustive test by any means. Therefore, if you could expand on this, esp. pre-1.4.2, post 1.6.0, assuming they use the same deployment.properties mechanism, it'd be appreciated.
Thanks,
Chris.Read U area of process.
You can get argument list from U area.
Though U area is not kerenl, you may be careful to read data using copyin() functions.
Good luck,
Chun-Mok Chung -
Document library open in client application not working for img,pdf,txt files
In an office 365 sharepoint site i have enabled open in client applicartion for document library but it is not working for image/txt/pdf files for word and excel files it is working fine. I have even turned on the feature open document in client application
by default from site collection features also but there is no change.
Please advice.
Regards,
ChaitanyaHi Chaitanya,
The feature is currently designed to be used with HTTPS, and will not work as expected with the HTTP connection available on Office 365 for professionals and
small businesses sites.
To take advantage of this update, do the following steps:
Wait for the update to the SharePoint Online service, which is in progress now.
Upgrade Adobe Reader to the version 10.1.2 client.
Add your SharePoint Online root URL/domain to the Trusted Sites security zone in Internet Explorer1 (e.g.,
https://contoso.sharepoint.com).
Check the Keep me signed in box when you log in to a SharePoint Online site.
This
SharePoint Online update is currently
being rolled out worldwide along with several other new features.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
I added preset motions to my interactive pdf file. It's not working when I export my file as an interactive pdf. It's working when I play it on the Preview panel. I must not be doing something right. Does anybody have any clue what I need to do to have my presets motions work when played on Acrobat
So do you mean export the whole document in a swf file format and then bring the whole swf file in and save it as a pdf file. Is there way to export these motion presets seperately and bring them back into Indesign. I wish it was less difficult but I guess there is no way around it for the time being.
-
Shared variables not working on PC
Can anyone tell from the attached screen shot, why my one shared variable is not working with the labview application I'm running on my PC. I set the variable to 48 (I thought), and yet in the NI Distributed System Manager the value doesn't changed.
Solved!
Go to Solution.
Attachments:
shared_var_not_working.JPG 255 KBIts not likely to be a deadband problem if you haven't touched the settings. I would check it out just in case though. In the project window, right click on the shared variable>>properties and select Update Deadband. See attached image. If it's not this, I shall have to think some more about what else could cause this.
As for ensuring it works when setting it from DSM...from your screenshot you appear to have a VI that writes to the SV. Change the code ore create a new VI so that it reads the SV and then double check that if you change the value in DSM, the VI also reads back the updated value. It may be that the number changes in DSM but does not update the SV in the VI - this would indicate a problem with the shared variable engine or the deployed variable library...Reboot PC and retry... if the problem persists let me know or attach the SV library!
Regards,
Dave
Senior Software Engineer
www.Adansor.com
Attachments:
SV_deadband.PNG 8 KB -
Query key Date Variable not working
Hi Folks -
I am coming across an issue with which some of you might be able to help me. I have a time dependent master data object which I've marked as a datatarget and have created a report on it. I wanted to give the user an option of specifying the key date and hence have created a variable in the query properties for the key date. This variable is of the type SINGLE VALUE, MANDATORY, USER ENTRY and CAN BE CHANGED DURING QUERY NAVIGATION.
Now my issue is that even though I enter a specific key date, the query is not pulling the records according to the key date. But instead if I use the option of specifying a particular date (instead of a variable in query properties), the query is running fine!!! Can someone please let me know why this is happening? Why is the query working fine when I mention a single constant value but not when I use a variable? Thanks for your help in advance.hi
This clearly shows your variable is not working fine
So in RSRT transaction debug using your variable
See in every step whether the variable is working properly
Assign points if useful
Thanks
N Ganesh -
BW hierarchy variable not working in Crystal Report 2008
Hi,
I have created BEx 7.0 report which has hierarchy on 0customer object, the report is working fine whith hierarchy variable. I have created Crystal Report by using this query as source. I have followed below link to create grouping to get data through hierarchy variable.
http://wiki.sdn.sap.com/wiki/display/BOBJ/BWHierarchiesinCrystalReports
But report does not work for hierarchy variable and report is blank. When I give filter of child node which has actual data then I get report output. For ex.
Below hierarchy for 0customer
11396
- 737007
- 123456
When I run report for 11396 then no data display but when I run 737007 child node I get report output but with blank group name.
Can anyone came accross this issue. Please guide me . Thanks in advance.Thanks Ingo for your reply..
The word filter means, I have hierarchy node variable in the BEx report that has become Parameter in CR. When I give hierarchy node variable value of parent node then there is not data display but for the child node I get the data.
For ex. In the info cube there is data for 730707 customer but in the customer hierarchy the parent node of 73707 is 11396. I am giving 11396 in the variable pop screen for hierarchy variable. I do not see any data but for 73707 I get data.
User does not know 73707, he always enter 11396 customer no. and he gets data in BEx query that is source of CR. but crystal report is not showing data for 11396.
One more point I want to tell here, I am saving CR at my local system not to SAP BW server.
Hope this clear my issue.
Harish Swami
Edited by: hswami27 on Jan 31, 2011 8:17 PM -
Hi all,
Previously, we were using OBIEE 11.1.1.5.0 and we were able to assign users to application roles by using the initialization block to assign the ROLES session variables.
1. My USER_SECURITY table in Oracle database:
USER_NAME | USER_ID | ROL
user1 | 1723 | GobalDataRole
user2 | 1739 | GobalDataRole
user3 | 1743 | GobalDataRole
2. The SQL query in my session initialization block:
select USER_NAME, USER_ID, ROL
from USER_SECURITY
where USERNAME = ':USER'
3. The row-wise initialization option is not checked.
4. In the Oracle Enterprise Manager Fusion Middleware Control, we created new application role: GobalDataRole and sync with rpd.
5. The GobalDataRole is used in the RPD to filter the data under permissions --> data filter. GobalDataRole only has access to Country A data.
6. Result: under my account, also in rpd Manage --> Sessions, user variable details
User_name , user_id & Rol variable is working fine as expected,
When we log in as user1, we can see in My Account, user assigned to: BI Consumers; Authenticated Role; GobalDataRole
When we log in as user2, we can see in My Account, user assigned to: BI Consumers; Authenticated Role; GobalDataRole
When we log in as user3, we can see in My Account, user assigned to: BI Consumers; Authenticated Role; GobalDataRole
User1, User2, and User3 are able to see the data correctly according the their data access setup.
Now, we using OBIEE 11.1.1.7.1 and using the same method, but we not able to assign users to application roles by using the initialization block to assign the ROLES session variables anymore.
Result:
User_name & user_id variable is working fine as expected, but the ROl variaible is not capturing the DB value,
When we log in as user1, we can see in My Account, user assigned to: BI Consumers; Authenticated Role
When we log in as user2, we can see in My Account, user assigned to: BI Consumers; Authenticated Role
When we log in as user3, we can see in My Account, user assigned to: BI Consumers; Authenticated Role
User1, User2, and User3 can see all data (which is wrong) because they are not assigned to the correct application role that sets the data restriction/filter.
Has anyone encountered the same issue? Any advice on how to solve this?
Thanks in advance!
Satheeshkumar PThanks user10615659 ,
- Yes the variable ROLES available in OBIEE 11.1.1.7.1
- Tested the init block and variables in offline rpd its working as expected.
- In online rpd, except ROLES and GROUP variable remaining variables working fine.
- Verified log file in both online and offline init block testing - the init block execution is successful.
Thanks -
Text Variable not working correctly
In CS3 I could create a TEMPLATE (.indt) with the "creation date" text variable in it and when I opened it it would have the CURRENT DATE (the date the new file was generated from the template) . In CS4 it opens with the date the TEMPLATE was MADE and not the current date (the day the new file was generated). I need the template to open with the current date (the day the template was opened). I tried using the "modification date" variable which works the FIRST time but if I open it the next day the date changes. I need the date to remain the same as the creation date. Does this make sense? Why did Adobe change the behavior of this? Please help.
-John StreeterHi Rakesh,
Just curious what is the purpose of creating a hidden column as suggested? Anyway, I have created it but nothing changes.
Allow me to clarify my situation again.
I have three columns:
1. Actual This Year
Type: Selection
2. Actual Last Year
Type: Selection
3. % of Actual This Year / Actual Last Year
Type: Formula
Definition: (Actual This Year) %A (Actual Last Year)
All columns use &0T_FYEAR& as text replacement variable. As such, all title would have year text.
The first two columns have been restricted with Fiscal Year variable, 0P_FYEAR.
1. Actual This Year
0P_FYEAR
2. Actual Last Year
0P_FYEAR - 1
Upon executing the query, I got the first two columns displaying their titles right, but the third column does not.
For example, let's assume I entered 2008 for 0P_FYEAR variable, the columns would display the following titles:
1. 2008
2. 2007
3. &0T_FYEAR&
I need the third column to display current fiscal year i.e. 2008 but it does not.
Appreciate your help! -
Bind Variable NOT working in APEX 4.0 within charts SQL
All,
I had a chart working fine in 3.2 which had a bind variable like :P11_EMP_NAME, when I created the same chart in 4.0 using the same query it did not work, until I changed the variable to v('P11_EMP_NAME'). Does anyone have experienced the same behaviour?
Thanks
VenkatHi Deb,
Both of your queries are using multi-series syntax i.e. returning more than one series of data, therefore your generated chart is actually generating 6 series rather than just the two that you're aiming for. You could try changing your queries to ensure they each generate a single series of information, which would then result in the extra Y-axis being applied to your "Series 2". Here's an example of what I mean:
Series 1:
select null link, label, value from (
select 'test' label, 1 value from dual
union all
select 'test2' label, 2 value from dual
union all
select 'test3' label, 3 value from dual
)Series 2:
select null link, label, value from (
select 'test' label, 100 value from dual
union all
select 'test2' label, 200 value from dual
union all
select 'test3' label, 300 value from dual
)I hope this helps.
Regards,
Hilary
Maybe you are looking for
-
How to use a ECC6 ztable in SAP BI without create a SAP BI flow (DSO)
Hi, We have a specific parameters table ZTABLE in ECC6 to maitain a factory date, this table is updated via an ABAP program (ZPROGRAM) after a factory job. The ZTABLE contain one a field u201CZDATEu201D that we need to store it into the infocube for
-
Firefox continues to crash instantly at startup.
on the 9th my wife complained that firefox should it crashed. I attempted to restart and submit bug with same results. I uninstalled all and reinstalled using ver 8 the previous ver was 7. Same issue resulted. I uninstalled again restarted win 7 and
-
Event ID 2115 A Bind Data Source in Management Group
Hi All, I have some issue's with Microsoft System Center Operations manager 2012 R2. The issue is the following: A Bind Data Source in Management Group XXXXXXX has posted items to the workflow, but has not received a response in 2100 seconds. This i
-
Unable to open MP4 file once published in CS5.5
Hello, I am sorry if I am missing something really obvious here - but when I publish to an MP4 player - I cannot run and open the file. Here is a screen shot of my publishing setting and the error message :
-
Classic hs 414 songs,frexes at 196 and have to reset.WHY????
Classic has 414 songs, freezes at 196 have to reset. WHY????