User id and Leaving action

hi experts,
there is a requirement from the client side.
when we pass the actions " Leaving  and Retirement ", the system should ask for that particular employee's USER details and it should cancel the user authorization or cancel the USER NAME.(if that employee is a USER).
plz tell me any options r available.
regards
david

Hi
In the leaving action please maintain the infotype 0105 subtype 001 so that when the action is run that particular user id is delimited at that date.
R K

Similar Messages

  • Use of user status and business actions

    Hi all,
    I'm new at status profiles, user status and business actions.
    Currently we are using status profiles and user status for orders - but business actions aren't assigned to the user status. In a project I should evaluate whether we can use those business actions.
    After reading a lot of documentations there is still one question left. What are the business-actions for and how can I use them?
    Let's say I've a status profile with following user status with according business actions:
    - status: new;   business action: to progress
    - status: in progress;   business action: to confirm
    - status: confirmed;   business action: decline or close
    - status: closed;   business action: close
    What happens when a user sets the status of an order to "confirmed"? Will be done additional checks for my order? - If yes: Wich checks will be done and exists there an API to effect these checks or to implement additional checks?
    Regards,
    Christian

    Christian;
    If you´re wanting to speak about Status Profile in OP. You can execute whole theses steps in T-code BS02, when in this IMG:
    1. Enter a Status Profile.
    2. Assign the status profile to an Object Type.
    3. Define the User Status.
    4. Assign Business Transactions to user statuses.
    5. Translate the status profile and user statuses.
    You can also to use this function to simulate the status development for a particular object.
    To do this, select a status profile and branch to the screen "Allowed Object Types". Then place the cursor on one of the object types.
    Using the function Extras -> Status simulation, you can simulate the status changes that could be caused by performing various business transactions, or by changing the staus manually, during the lifetime of the object concerned.
    You can also branch directly from simulation to status maintenance for the object concerned, to display information on which transactions are allowed or disallowed in the current situation.
    The log function records all the changes you simulate and allows you to navigate freely to see what effects these are having.
    Status profile info
    Using the function Extras -> Status profile info, you can display a list of all the entries you have made for a particular status profile. The list is structured as follows:
    The first block contains the permitted object types.
    The second block contains the user statuses.
    The third block contains the following information for each user status:
    which transactions it allows
    which transactions it allows with a warning
    which transactions it disallows.
    I hope help to you
    Regards
    Luciano Nobrega

  • Query about User Variables and Advanced Actions

    Hello,
    I am creating a clinical-based project using Captivate 5.I have to give you quite a bit of information before I can pose my questions so please bear with me.
    Users have to select multiple options from a checkbox widget (shown below).
    Each options, for example 'location' is associated with a variable for example 'hpi0' (See below):
    Each option has addtional data associated with it:
    Location = hpi0 (user variable)
    Location data = hpi0data (user variable)
    Please see the screenshot below:
    Notice in the image above that I have created a conditional advanced action - if the user selects Location (hpi0) on the checkbox widget, the data associated with that variable will be presented to them. That data (e.g. location data or hpi0data) is presented in a caption text box in the following slide. (see below)
    I hope I have given you enough information.This is a complex project and this is just one of my many problems.I have had to create over 200 hundred user variables and more than 6 Conditional Advanced Actions in one project. The project is becoming unstable. So here are my queries:
    1) Are there limits to the amount of user varables I can create in a project?
    2) If so, how can I re-use the user variables I have already created? Otherwise I will have to divide this project into 3 parts and I want to avoid doing that.
    3) Are there limits to the amount of Advanced actions I can create in a project?
    Again  I am using Captivate 5 for this project.
    Any assistance, tips or tricks would be greatly appreciated. I am learning captivate as I go so If there is away to streamline this process, I am open to any suggestions.
    Thanks
    Tinukwa

    Hello Tinukwa
    This is indeed a challenging project, and although I did create a lot of projects with advanced actions, they were never that size. You have to listen to Jim's words about using some widgets, he is a widget specialist which I'm not. I do not know if you are aware of the fact that the checkboxes widget coming with Cp was extended by Jim? He offers it on his website, I blogged about this extension and suppose you do know my blog. About the advanced actions, perhaps I could help but only screenshots are bit limited. So I wonder if either I could have access to the file and/or if we could have a Connect session eventually?
    First intuition tells me
    we should look to re-use variables, but I do need more information; do you need the vars XXXXdata somewhere else later? If not, perhaps only to display it you could use one variable; now you keep the information chosen by the user in 2 variables: hpi0 and hpi0data (isn't that redundancy?)
    and by choosing labels for variables, actions and objects in an intelligent way reduce the editing time because you'll need a lot of almost identical advanced actions. Usually I do a lot of reflection before starting to create labels, variables and actions.
    About re-using what you already constructed: as I explained once, a template is the only way to be able to re-use a script at the moment. And Kevin Siegel discovered (so gratefully for that) it is possible just to change the extension of a standard CP file to cptl to have a template.
    Lilybiri
    PS Jim suggest also to split up the project? Here I'm not sure if that is really needed.. should have been the case for previous versions.

  • Leaving action

    Hi Experts,
    Pls guide me to solve the issue related to leaving action of emp in PA40.
    When an employee left the company, which infotypes needs to be delimited.
    Is it receommanded to put the practice to enter Run payroll up to, Do not account after in IT0003?
    Can end user maintian IT0003 for left employee? or it can be possible for only exceptional circumstances?
    What will be the recommanded porcess to release the pension in case of retired employee?
    I want to get the complete information ,connection between IT0003 and leaving action.
    Thanks & Regards,
    Nirali P

    Hi Nirali,
    When an employee left the company, which infotypes needs to be delimited.
    All the basic infotypes, like 0000,0001,0007,0008 and statutory infotypes of the country will be delimited. The best would be to check the standard configuration of SAP, where in SAP would have advised which infotypes to be delimited for leaving action.
    Is it receommanded to put the practice to enter Run payroll up to, Do not account after in IT0003?
    I would say , it would depend on company to company and scenario based. But mostly it is seen IT0003 is modified only in cases where exceptions are there.
    Can end user maintian IT0003 for left employee? or it can be possible for only exceptional circumstances?
    depends on the level of authorisation you are providing to to the end user
    What will be the recommanded porcess to release the pension in case of retired employee?
    Can you elaborate what u mean by this

  • Leaving action with IT0003

    Hi Experts,
    Pls guide me to solve the issue related to leaving action of emp in PA40.
    When an employee left the company, which infotypes needs to be delimited.
    Is it receommanded to put the practice to enter Run payroll up to, Do not account after in IT0003?
    Can end user maintian IT0003 for left employee? or it can be possible for only exceptional circumstances?
    What will be the recommanded porcess to release the pension in case of retired employee?
    I want to get the complete information ,connection between IT0003 and leaving action.
    Thanks & Regards,
    Nirali P
    Edited by: Nirali P on Aug 19, 2011 8:13 AM
    Edited by: Nirali P on Aug 19, 2011 9:08 AM

    Hi Nirali,
    When an employee left the company, which infotypes needs to be delimited.
    All the basic infotypes, like 0000,0001,0007,0008 and statutory infotypes of the country will be delimited. The best would be to check the standard configuration of SAP, where in SAP would have advised which infotypes to be delimited for leaving action.
    Is it receommanded to put the practice to enter Run payroll up to, Do not account after in IT0003?
    I would say , it would depend on company to company and scenario based. But mostly it is seen IT0003 is modified only in cases where exceptions are there.
    Can end user maintian IT0003 for left employee? or it can be possible for only exceptional circumstances?
    depends on the level of authorisation you are providing to to the end user
    What will be the recommanded porcess to release the pension in case of retired employee?
    Can you elaborate what u mean by this

  • How to track agents and there actions at all levels in a workflow

    Hi All,
    We have a requiement where in the task description we are
    required to give the details of the people who had executed the workflow and the action they have taken.
    That is suppose  a user approves or rejects a workiitem.
    Then the another user who recieves the workitem should know
    who the previous users were and what action they had taken
    The previous agent who executed the work item can be identified, but we don't know how to identify what action did the previous user has taken.
    Thanks and Regards
    Shraddha

    You can make use of WI_ACTUAL_AGENT container element of the respective task container in order to know who has executed the last workitem.
    Thanks
    Arghadip

  • EG,ESG and personnel actions for multiple comapny

    Dear All,
    we are implementing SAP HCM for 2 countries (dubai and Pakistan both are same country grouping =99) in dubai they have 4 companies(4.Personnel Area's)with 4 company code. and in Pakistan ,they have 3 company's( Personnel Area's)
    My question is. each company's in Pakistan have different EG and ESG and also each company have different Personnel Actions,( some actions are not applicable to other PA for an example.. Transfer action  is not applicable to other PA in pakistan company
    How can i create diferent Employee gorup and employee sub group for each comapny (i mean for each personnel Area?
    pls help me
    Manjula

    Hi,
    ARU is correct.  The Personnel Areas are part of the Enterprise Structure and define an organization by location, product line, function, etc.  Employee Group/Subgroup are in the Personnel Structure and define the types of employees - hourly, salaried, sales, director, vice president, full time, part time, etc.  The Employee Groups/Subgroups, however, are country specific and in table T503Z can be assigned to one or more countries.  Thus, you could have certain Employee Group/Subgroups valid for Dubai and certain ones for Pakistan, but not between Personnel Areas if in the same country. 
    Also as responded to above, you can control the actions by User Group and have actions called the same have different infotypes or not appear at all based on the User Group assignment of the processor. 
    Paul

  • Controlling user flow and slide access

    Hi everyone!
    I'm a Captivate newby
    Here's my problem. I have a set of slide, and I want to be sure the user has completed (listened to) the first 5 slides before going to the 6th.
    I've just seen that I can execute javascript. Here's my possible solution.
    On slide exit (of slides 1-5) I execute a script that add the number of the slide I've just finished in an array.
    If the user try to enter in the 6th slide, I execute a script that checks if the array contains the number from 1 to 5. If not, I jump to the first slide.
    Is this a reasonable solution? Can I control all these events in javascript? Or is there a better way to solve the issue?
    Thanks,
    Marco

    Using Captivate User Variables and Advanced Actions would be a much easier solution than trying to implement JavaScript.
    You just need to set up a variable that will be incremented by each successive slide the user visits.  When they get to the sixth slide, have the variable value checked by a Conditional Advanced Action.  If the variable is the correct value, Continue play, else jump back to the beginning (or whatever the appropriate action should be).

  • Leaving action infogroup and operations

    Hello experts,
    in leaving action which all infotypes we should delimit by operation LIS9 ? why it is not advicd to delimit actions(0000) and organization assignment(0001) infotypes using this?

    hi,
    It is not advised to delimit 0000 & 0001 bcoz u want to see/analyse/report the details of employees who have seperated. Master data is not deleted for employees who have left the company.
    SKR

  • User name and Password for Actions

    Dear Friends
    i am working with IDES 6.0 , while performing Hiring action, for every infotype after enter data, sys prompting for USER name and Password, only after providing User name and Password  sys is going for the next infotype
    to my knowledge sys should not ask for Uname and password
    please suggest how to solve this
    Thanks
    kumar

    Hi,
    This is a basis issue. Ask your basis team to solve this problem. same thing was happening for me also few days back. I took help from basis team and solved. If you are not able to solve let me know I will ask my basis team and inform you.
    Regards,
    Purnima

  • When I try installing Firefox 6.0 from the binary file, a box with "Run As" in the type field appears, which asks me for user name and password. Please advise about the course of action that I should take.

    Trying to run it as the current user, or as one from a different account(administrator in this case) also doesn't work.

    I think the client is not able to do a HTTP POST
    to the WLS server but it can do a HTTP GET.
    I dont know why.
    http://manojc.com
    "Ganesh" <[email protected]> wrote in message
    news:3eba91bc$[email protected]..
    >
    Hi,
    I deployed a rpc web service using WLS 7.0 SP2 in HP-UX 11 environment.When I
    invoke the web service through my browser (IE 6.0) using the web servicesurl,
    it brings my service method correctly. From there, if I click the invokebutton
    it asks me for a network user name and password under "weblogic" realm???If I
    provide the admin user credentials (which I supplied while creating mydomain)
    it is not accepting that it keeps popping up this network user passwordwindow
    over and over. Not sure which username/password I have to provide here tosee
    the result of my service.
    If I try to invoke the web service through my client (static) I am gettinga connection
    refused exception. I guess either way, I am not able to access my webservice.
    In the attached file, I have cut and pasted the client stack trace as wellas
    the server log trace from weblogic.
    Any ideas would be highly appreciated.
    Thanks,
    Ganesh

  • AUDIT action (create, delete, privilege escalation, set and change password from users account and group) users and admins in Solaris 10

    Hello.
    in Solaris 10 i need auditing process create, delete, privilege escalation, set and change password and etc... from users account and group.
    I set settings:
    in file syslog.conf:
    *.info;mail.none;cron.none;audit.notice            @IP-Remote-syslog-server-SIEM
    in file   /etc/security/audit_control:
    dir:/var/audit
    flags:lo,ad,ex,cc,am,no,fc,fd
    minfree:20
    naflags:lo
    plugin:name=audit_syslog.so;p_flags=lo,ad,ex,cc,am,no
    in file   /etc/security/audit_user:
    root:lo,ad:no
    Now I see in the logs only the fact of a connection via SSH and run processes on behalf of users. Creation. delete users, change passwords for some reason do not is logged.
    Many users. For each individual write permissions in the file /etc/security/audit_user not possible, it is likely to forget any new user (or there is a possibility in this file one line to describe the audits for all accounts?)
    Where is the mistake?

    You are most likely hitting Bug 15779000 user/role/groupadd/mod/del don't audit their use.
    And the fix is only available in S11.2.
    -- Renaud

  • Change infotypes end date when delete leaving action for employee

    Hello,
    I created new infotype and when employee leaves its end date is changed for leaving date.
    When leaving action is deleted ther is some least of infotypes that user can sign so the end date of selected infotypes will be changed to 31.12.9999. How can i add my infotipe to this list?
    Thank you,
    Paulina

    Hi,
    Maintain IT 0041 where in that table maintain employee start date of hiring and leaving date of employee bze in IT 0000 the dates will change as per action lets say if employee hire that date will be in IT 0000 action and if employee gets promotion date or leaving date that will store in IT 0000 by delimiting other actions
    So maintain IT 0041 where you can pull dates from there if you maintain
    End date will always be 31.12.9999 so check action start date you will get in sequence
    Thanks
    Edited by: Vibinsap on Mar 9, 2012 7:12 AM

  • Date change in leaving action

    Dear Experts,
    I have a scenario where in SAP Master data employee's leaving action start date is 01.04.2011 and end date as 31.12.9999 where as in IDOC its start date of leaving action is 20.03.2011 and end date is 31.04.2011
    Now user want me to maintain the IDoc record in sap, both start date and end date of the leaving action in that case how can i change bath the dates, as in PA41 if i will go only start date will be active but how can i maintain the end date.
    or
    as we have 2 actions for a person i.e. hiring and leaving
    so the start date shall is change in the Hiring action start date place?? and
    and end date shall i change in the start date of the leaving action??
    please confirm me i am very much confisud
    Replay ASAP, its very urgent
    Thanks a ton in advance,

    Hi,
    Maintain IT 0041 where in that table maintain employee start date of hiring and leaving date of employee bze in IT 0000 the dates will change as per action lets say if employee hire that date will be in IT 0000 action and if employee gets promotion date or leaving date that will store in IT 0000 by delimiting other actions
    So maintain IT 0041 where you can pull dates from there if you maintain
    End date will always be 31.12.9999 so check action start date you will get in sequence
    Thanks
    Edited by: Vibinsap on Mar 9, 2012 7:12 AM

  • Problem after Performing Leaving action related to OM

    <b>Scenario:</b>
    Hi this is the first time i am working in a an SAP HR environment where all most all components like OM,PA,Payroll,Time,PD etc is implemented in <b>4.6 Version.</b>
    I had seen in the production server that after performing the Leaving action of the employee his/her Postion will change to 999999(Default postion) when we view InfoType  0001 0r 0000.
    But in case of 1 employee it did not change to 999999 after leaving action was performed.It still shows the Position what he held when he was Active.
    <b>Qn 1</b>.In the above case which is right?
    <b>Qn.2</b> what should ideally happen in Standard SAP system in such case.
    <b>Q3.</b> Can we change that postion to 99999 (default) of an employee whose status in Withdrawn?
    <b>Qn.4</b>. Anyoption other than  rehiring and terminating him to sove this?(is this option itself is right practise?)
    <b>TIP: I dont know if the end user properly followed the steps in doing the Leaving Action</b>

    Hi Abhilash,
    If you are getting the default position then the Integration plogi - preli is set to 99999999. and you should get it for all the termination action. Check with the user if she had run the leaver action as per your infogroup (in case her user profile is not set up)
    Ideally thats the way it is set up as we dont need a position for a Terminated employee, and that position can be filled up by someone else.
    You can change it to 99999999 if all other positions are default as per your termination action.
    Regards
    Uday

Maybe you are looking for