User ID ........PM Module
Dear All,
Now, we have different plant sections, Maintenance work center & Planner Groups for Plant Maintenance Module. Can i restrict the users for creating Maintenance Order on equipment of other work center ?? On planner Group its possible....but can we strict them on Maintenance work center ???
One more thing can we strict the release of order on material issue basis?? Like if there is any reservation created in maintenance order then there should be a restriction,,,,if no reservation then no checks????
plz guide'
DM
Dear
Try with this . for restriction objects thro work center is not possible in my knowldege. But the same could be work in differently thro cost center since that work center has costcenter.
Obj: I_KOSTL
VALUE : COST CENTER OF THE WORK CENTER
T code: IW 31
and give this message to Basis.They able to do or advice accordingly.
2nd questions ur enq is not clear. But the i think u r asking the materail availablity check . For this while creating and realesing times the order u can restrict if material, manpower,prt is not available.
For this go 4 configuration mTC PROCESSING-FUNCTIONS & SETTINGS OF ORDERSAVAILABLITY CONTROLAVAILABLITY CHECK FOR MATERAILPRTCAP-CREAT THE CHEK RULE
then goto OPJJ here u select as like reservationpopr +stock
THEN the same assign each orders at OIOI you will suceed.
If any pls get back
thenna
Similar Messages
-
How to use a user defined function module in IP
Hi All,
Can you please guide me on how to use a user created function module in IP? My requirement is to have 2 exit function modules to be used in IP to load the falt file data into a cube..
Regards,Hi,
/people/marc.bernard/blog/2007/11/25/how-to-load-a-file-into-sap-netweaver-bi-integrated-planning-part-1
thanks to Marc Bernard
Regards -
How to capture the User input value to user exist function module.
Hi,
How can i capture user input value.Here i am using User exist in BPS variable.
Calculating days using user exist functin module and my input is another variable i.e user defined value.
How can i capture user defined vaule into my function module.
This is very urgent can you help me..
Thanks....Hi!
You can get the instance using the method get_instance of the class cl_sem_variable, and call the method get_value with the return. Check the example:
CALL METHOD cl_sem_variable=>get_instance
EXPORTING
i_area = (planning area)
i_variable = (variable name)
RECEIVING
rr_variable = lr_var
EXCEPTIONS
not_existing = 1
OTHERS = 2.
CHECK sy-subrc IS INITIAL.
CALL METHOD lr_var->get_value
RECEIVING
rto_value = et_value
EXCEPTIONS
error = 1.
After this, read the first line of the table et_value (it should be the value that the user choose on the screen).
seeya!
Robson -
How can i get the list of all tcode used by user of particular module
Hi,
How can i get the list of all tcode used by user of particular module (e.g FI , MM ,PP) within year .
Regards
VikramLogin to your SAP System
Run TCode SE16
Type Table Name : TSTCT
Press F7 Key (Table Contents )
Go to Settings in menu bar
Select User Parameters
Under Keyword select Field Label and press green check mark
Select your criteria in Data Browser and execute
You will see all t codes in there
Regards,
Yogesh -
BAPI , BADI , USER EXIT , FUNCTION MODULE
Hi Experts
Can any body pls explain me abt BAPI , BADI , USER EXIT , FUNCTION MODULE and its uses in details .
Thanks
DevashishDear Deba,
Functional Module:Procedure that can only be defined in function groups and outside of classes. Can be called from all
programs. Begins with FUNCTION and ends with ENDFUNCTION. Is maintained using the Function Builder of the ABAP
Workbench.
Functional Module can be checked using T Code SE37 for a package ,say in standard SAP CS15 will be used for checking
the where used list for a material and here it can be checked only for one material,in case if we want to check for a list of
materials a small report can be developed using the fucntional modules like
CSEP_MAT_BOM_SELECT_WHERE_USED API Bills of Material: Select BOM(s) (or)
CS_WHERE_USED_MAT Bills of material; where-used list
User Exit:A point in an SAP program where a customer's own program can be called.
In contrast to customer exits, user exits allow developers to access and modify program components and data objects in the
standard SAP System. On upgrade, each user exit must be checked to ensure that it conforms to the standard system.
There are the following types of user exit:
User exits that use INCLUDEs - These are customer enhancements that are called directly in the program.
User exits that use tables - these are used and managed using Customizing.
User Exits can be viewed or checked using the T Code SMOD and using CMOD an user exit will be activated.
BAdi:
A template for BAdI objects.
Business Add-Ins (BAdIs) are the basis for enhancements where BAdI methods in object plug-ins can be called from ABAP
programs. The calling program controls which BAdI implementations are used by specifying filter values. A BAdI consists of a
BAdI interface, a set of filters and some settings.
From Release 7.0, BAdIs are edited in the Enhancement Builder and reside in the global class namepsace. You can switch on
their implementations via the Switch Framework.
There are also classic BAdIs, which are edited in the BAdI-Builder and superseded function module exits in Release 4.6.
Related T Code SE18.
Regards
Mangalraj.S -
Badi's, user exits, function modules and reports
Hi all,
Can anybody tell me the exact diff among Badi's, user exits, function modules and reports? I mean what are their functions?
thanksHi,
This is a beginners question,but still you can check the below links.
BAdis:
Regarding Enhancements/User-Exits in ABAP
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/a1d548892b11d295d60000e82de14a/content.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/779183#
FM:
http://help.sap.com/saphelp_nw70/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
Reports:
http://it.toolbox.com/wiki/index.php/How_many_types_of_reports_are_there_in_ABAP_and_what_is_the_difference_between_them%3F
Regards,
saurabh -
Dear Team,
I have two Enterprise lync 2013 pools, abcPool and abcpool1. abcPool1 has got two servers, Server1 and server2. and abcpool has one FE server named "Server 3". and they have pool pairing.
Replication was fine between them when i had only one FE server in each pool, one day FE service broke on one of the FE server on abcpool1 and failed to start so i had to do failover to another pool, at that time i introduced one more FE in abcPool1, that
why now 2 FEs in abcPool2. Server1 FE service was resolved by reinstalling the binaries. However after that im unable to get the backupservice state to normal, i tried the below articles with no luck,
http://social.technet.microsoft.com/Forums/lync/en-US/0403621e-26b6-4cd0-bbca-8534a20de665/backup-service-pool-ownership-conflict-during-import?forum=lyncdeploy
http://msucmenow.blogspot.in/2013/05/troubleshooting-lync-2013-pool-pairing.html
"Event on Server 1"
Log Name: Lync Server
Source: LS Backup Service
Date: 1/21/2014 8:02:33 AM
Event ID: 4073
Task Category: (4000)
Level: Warning
Keywords: Classic
User: N/A
Computer: ABC.net
Description:
Microsoft Lync Server 2013, Backup Service user store backup module detected items having pool ownership conflict during import.
Items having pool ownership conflict:
ItemId: 1b3be172-b121-43cf-bd4e-b3d368eae6a9, DocId: 7972, DocName: urn:hcd:[email protected]
ItemId: 1b3be172-b121-43cf-bd4e-b3d368eae6a9, DocId: 7973, DocName: urn:lcd:[email protected]
ItemId: 1b3be172-b121-43cf-bd4e-b3d368eae6a9, DocId: 7974, DocName: urn:upc:[email protected]
PS C:\Users\lyncadmin> Get-CsBackupServiceStatus -PoolFqdn pool1.net | fl
ActiveMachineFqdn : abc1.net
OverallExportStatus : SteadyState
OverallImportStatus : ErrorState
BackupModules : {UserServices.PresenceFocus:[SteadyState,ErrorState],
ConfServices.DataConf:[FinalState,NormalState],
CentralMgmt.CMSMaster:[FinalState,NotInitialized]}
Following error in "Lync Server" logs on server3 on abcPool.
Log Name: Lync Server
Source: LS Backup Service
Date: 1/21/2014 9:37:47 AM
Event ID: 4069
Task Category: (4000)
Level: Warning
Keywords: Classic
User: N/A
Computer: SQL1.net
Description:
Microsoft Lync Server 2013, Backup Service user store backup module encountered an exception that was handled gracefully when importing document batch.
Batch file: UserServices\PresenceFocus\1-UserServices-8\Data\488bc218-9954-4caf-a5da-89efdb7b85a7_0_1562.xml.
Exception: System.Data.SqlClient.SqlException (0x80131904): Snapshot isolation transaction aborted due to update conflict. You cannot use snapshot isolation to access table 'dbo.Batch' directly or indirectly in database 'rtcxds' to update, delete, or
insert the row that has been modified or deleted by another transaction. Retry the transaction or change the isolation level for the update/delete statement.
Log Name: Lync Server
Source: LS Backup Service
Date: 1/21/2014 9:52:45 AM
Event ID: 4064
Task Category: (4000)
Level: Warning
Keywords: Classic
User: N/A
Computer: SQL1.net
Description:
Microsoft Lync Server 2013, Backup Service user store backup module encountered an exception that was handled gracefully during export.
Additional Message:
Exception: System.IO.IOException: The process cannot access the file '\\SQl1.net\LyncShare\1-BackupService-10\BackupStore\UserServices\PresenceFocus\Cookie\Cookie.zip' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath,
Boolean checkHost)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
Praveen | MCSE Messaging 2003When you add a new FE in pool acdpool1, please check you have run the following:
<system drive>\Program Files\Microsoft Lync Server 2013\Deployment\Bootstrapper.exe
For the details, check
http://technet.microsoft.com/en-us/library/jj204773.aspx
Lisa Zheng
TechNet Community Support -
Dynamic Call --- User Exit/Function Module
Hi All,
We have a User Exit/Function Module which is called dynamically. This is configured and we are missing its configuration path. Could any of you guys let me know more details where this configuration could reside ?
Thanks much
RaghuHi,
When this function module CALL FUNCTION LT_TRWPR-FUNCTION is called, it automatically goes into a Z_XXXXXXXXX function module.
This function module is called in all transactions where financial postings could happen, however to be precise i would say at the time of Vendor invoice postings.
Eg: Tcodes MIRO, FB60.
Thanks
Raghu Kolla -
How to know the active users per HRMS module?
Dear all,
I am looking for a good way to find the number of concurrent active users per HRMS modules like payroll , human resources, etc ...
What is the best way to do that calculation?
Kindly advice,
Thank you and best regards,
C.See the old posts..
Re: USERS CONNECTED
Re: No of Apps users log-in.
Hope this helps,
http://www.oracleracexpert.com
IPC Send timeout issue and Solution
http://www.oracleracexpert.com/2009/09/ora-29740-evicted-by-member-0-group.html
Unable to start RAC instance after applying patch.
http://www.oracleracexpert.com/2010/03/unable-to-start-rac-instance-after.html -
Report, back ground job, user exit, function module used
I have more than 100 Z program and report painter program, user exit, function module for one country, inside this country, there are many company code, for a specific company code, I want to know which Z program/CMOD user exit/function module/back groundjob is used in this company code, any table or transaction can do?
also can we find all z tables used in this company code?May be this url can help you http://it.toolbox.com/wiki/index.php/Find_data_in_your_SAP_system_and_know_which_tables_do_what
-
Concurrent user statistic by module
Hi,
Is it possible to get the concurrent user statistic by module (e.g.: FI 10 users, MM 100 users, etc)?
How to do it?
I've notes 157758 and below thread, but still don't have the answer.
Concurrent User Statistics Information
Best regards,
hiroshiHello,
have a look on transaction ST07 .
Best Regards -
Using a different user(other than default PI user) with adapter module
Hi,
We are having a custom adapter module built to interact with a Hardware Security Module(HSM). This custom adapter module by default uses a PI user configured in the system. However, we are not able to pass commands to HSM because of insufficient authorizations to this PI user. Now, we do not exactly know the permissions required for the user to access HSM. We have asked the HSM support team about the same. However, I wanted to explore the possibility of using a different PI user to work with the adapter module and eventually pass commands to HSM.
We have an admin user configured which has all the necessary authorizations. Is it possible to use this admin user created on PI system to work with adapter module so that it passes commands to HSM?
Thanks,
Ravi DesaiWe have given the necessary authorizations to PI user.
-
How to set user command in module pool program
hello expert,
like in report: PARAMETERS: RB_SING RADIOBUTTON GROUP RAD3 DEFAULT 'X' USER-COMMAND C1.
in module pool program, hw to set user-command in screen.
srinivasPBO.
Call subscreen <SUBSCREEN NAME> Including sy-repid(PROGRAM NAME) G_DYNNR(SCREEN NUMBER'.
PAI
module user_command.
Call subscreen <subscreen name>
Module user_command.
case sy-ucomm.
when 'BUT1'.
g_dynnr = 200.
when 'BUT2'.
g_dynnr = 300.
Endcase.
end module
REPORT demo_dynpro_tabstrip_server.
CONTROLS mytabstrip TYPE TABSTRIP.
DATA: ok_code TYPE sy-ucomm,
save_ok TYPE sy-ucomm.
DATA number TYPE sy-dynnr.
mytabstrip-activetab = 'PUSH2'.
number = '0120'.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE user_command INPUT.
save_ok = ok_code.
CLEAR ok_code.
IF save_ok = 'OK'.
MESSAGE i888(sabapdocu) WITH 'MYTABSTRIP-ACTIVETAB ='
mytabstrip-activetab.
ELSE.
mytabstrip-activetab = save_ok.
CASE save_ok.
WHEN 'PUSH1'.
number = '0110'.
WHEN 'PUSH2'.
number = '0120'.
WHEN 'PUSH3'.
number = '0130'.
ENDCASE.
ENDIF.
ENDMODULE.
flow logic of the screen 100
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN SUB INCLUDING SY-REPID NUMBER.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
CALL SUBSCREEN SUB.
MODULE USER_COMMAND.
flow logic of the screen 110
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
flow logic of the screen 120
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
flow logic of the screen 130
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
REGARDS
VASU -
User exit function module include how to write the code
hi all,
i am creating user exit for ME22N using this enhance MM06E005 .
in this i created subscreen and set some fields .
that data has to be stoe in EKPO.
inside the include i have to write the logic plz guide me how to follow .
once i enter it will store on wish internal table and wish internal table to shall i move to EKPO .
If Tcode is ME23N how to display data in disable mode.
Regards,
Hari.This is the code inside the function module .
once i enter data in custom field the below wish table it will store.
FUNCTION EXIT_SAPMM06E_016.
""Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_EKPO) LIKE EKPO STRUCTURE EKPO
*" VALUE(I_AKTYP)
*" VALUE(I_CI_EKPO) LIKE EKPO_CI STRUCTURE EKPO_CI
*" VALUE(I_BSTYP) LIKE EKKO-BSTYP
*" VALUE(I_NO_SCREEN)
*" VALUE(I_LFA1) LIKE LFA1 STRUCTURE LFA1
*" VALUE(I_LFM1) LIKE LFM1 STRUCTURE LFM1
*" VALUE(I_EKKO) LIKE EKKO STRUCTURE EKKO
*" VALUE(I_REKPO) LIKE EKPO STRUCTURE EKPO OPTIONAL
*" VALUE(I_KEKPO) LIKE EKPO STRUCTURE EKPO OPTIONAL
*" VALUE(I_AEKPO) LIKE EKPO STRUCTURE EKPO OPTIONAL
*" VALUE(I_REBAN) LIKE EBAN STRUCTURE EBAN OPTIONAL
*" VALUE(I_MT06E) LIKE MT06E STRUCTURE MT06E OPTIONAL
*" VALUE(I_EINA) LIKE EINA STRUCTURE EINA OPTIONAL
*" VALUE(I_EINE) LIKE EINE STRUCTURE EINE OPTIONAL
*" VALUE(I_EKPO_OLD) LIKE EKPO STRUCTURE EKPO OPTIONAL
*" VALUE(I_KOMP) LIKE KOMP STRUCTURE KOMP OPTIONAL
*" VALUE(I_ENJ_CALL) OPTIONAL
*" TABLES
*" TEKPO STRUCTURE BEKPO OPTIONAL
*" TEKET STRUCTURE BEKET OPTIONAL
*" TEKKN STRUCTURE EKKNU OPTIONAL
*" TKOMV STRUCTURE KOMV OPTIONAL
INCLUDE ZXM06U41 .
ENDFUNCTION.
inside the INCLUDE ZXM06U41 . i writen this code
*& Include ZXM06U41
DATA :
FS_EKPO TYPE EKPO_CI.
IF ( SY-TCODE EQ 'ME22N' OR SY-TCODE EQ 'ME23N'
OR SY-TCODE EQ 'ME22' OR SY-TCODE EQ 'ME23' ) .
LOOP AT TEKPO.
IF ( TEKPO-EBELN EQ i_EKPO-EBELN
AND TEKPO-EBELP EQ i_EKPO-EBELP ) .
EKPO_CI-ZMATERIAL = TEKPO-ZMATERIAL.
EKPO_CI-ZQUANTITY = TEKPO-ZQUANTITY.
EKPO_CI-ZUNIT = TEKPO-ZUNIT.
EKPO_CI-ZPRICE = TEKPO-ZPRICE.
EKPO_CI-ZCURRENCY = TEKPO-ZCURRENCY.
ENDIF.
ENDLOOP.
ENDIF.
Regards,
Hari. -
BAPI to find number of users in HR module
Hi ,
I wanted to know if there exist BAPI that would return me the number of SAP HR module users in a system.
I cam across the BAPI's for info types like personu2019s Personal Data (Infotype 0002)
BAPI_PERSDATA_CHANGE u2013 Change personal data
BAPI_PERSDATA_CREATE u2013 Create personal data
BAPI_PERSDATA_CREATESUCCESSOR u2013 Create subsequent personal data record
BAPI_PERSDATA_DELETE u2013 Delete personal data
BAPI_PERSDATA_DELIMIT u2013 Delimit personal data validity period
BAPI_PERSDATA_GETDETAIL u2013 Read personal data
BAPI_PERSDATA_GETDETAILEDLIST u2013 read instances with data
BAPI_PERSDATA_GETLIST u2013 Read instances
But i wanted to know if there exist a master table which would return me the number of records irresepctive of the infotypes.
Best Regards
ManojHi manoj,
All those BAPIs you have mentioned are for getting details of employee records from the system.
I suppose you want information related to System Users. But according to my opinion, we cannot bifurcate whether a particular UserID is for a particular module or not.
One wordaround is that we can check from some authorisation table. If a particular userid has right for PA30 transaction code, then we can consider him as a HR user.
The authorisation tables are AGR*.
regards,
amit m. -
User exit /function module include in WM : how to write the code
Hi all,
I would like when TO creation in WM the field Queue (LTAK-QUEUE) to take a specific value
I found the user exit MWMTO001 Enhancements for end of transfer order generation .
First is it the correct user exit for this purpose?
Then as I have to write the logic pls guide me how to follow .
FOR A SPECIFIC WAREHOUSE NBR
IF LTBK- BETYP = J ( Kanban/JIT)
THEN LTAK-QUEUE = F_PICK_RF
Regards,
CadanjHi,
First of all, thanks for your answer.
However I found the fied QUEUE (LRF_QUEUE) in the structure LTAP_VB (Transmission structure LTAP + LTAP1 for update task).
So I suppose that this field can be updated, can it?
Thanks for your feedback.
Cadanj
Maybe you are looking for
-
Problem regarding insert and Display BLOB Image in Tabular form
I am trying to display and insert image in manual tabular form In Oracle APEX. but the image i uploaded was not inserted in wwv_flow_files table and in update button process i got "no data Found" Error...pls someone help me.... some part of code is b
-
Rss:PubDate gives too much info to iWeb Blog RSS feed
Hi All! Blog pages are setup in iWeb, and I've got an external "bot" that subscribes to the RSS feed from the blog. I'm grabbing the feed and stripping the {rss:pubDate}, {rss:title} and {rss:description} fields from the feed to re-format for posting
-
Business Object type and Transactions
Hi, gurus. Where can i check the matching of Business Object type with transaction type , i.e. CRM Service Process ( BUS2000116 and SLFN)? Is it possible to change these kind of settings? Where? Thanks a lot
-
How does iWeb read the Domain package?
My MacBook is having stability problems. Along the way with its MANY crashes, it has lost its path to my iWeb domain. The Domain package in the Application Support folder has its contents intact, but upon opening iWeb, the sites are missing, and ther
-
Question to be asked to the client to setup the SAP QM configuration
Dear Please let me know what are the question to be asked to the client to setup the SAP configuration as per there business. Thanks Dhanu.