User IDs mixed up

When I was ill my husband setup our new iPhones by connecting them both to HIS computer. At the same time, he changed his email address and his iTunes user ID.  Somehow, during this process he managed to link his iTunes library to MY user ID so that both of our IDs connect to the same library.  My computer has since crashed and I cannot for the life of me figure out how to get my user ID directed back to my own iTunes library, especially since most of our music was purchased with my account. 
There must be some way to do this, right?  Then I will sync my iPhone to the laptop and go from there.  Thanks!

Thanks for your reply.
When you say "check the permissions", what do you mean?
I also use Fetch and Fire FTP to access the same remote sites on the same computer. I noticed the corruption after using Fetch to access the same accounts. Any chance that Fetch or Fire FTP could be causing the corruption of the passwords and user names?

Similar Messages

  • No more mixed-case user IDs?

    Hello,
    Since upgrading from app server 7 to web server 7, I have had reports of malfunctioning webapps that have seemed to work fine for me. Today I discovered the source of the problem - mixed-case user IDs.
    Specifically, the username that the user supplies during basic authentication is of the form "FirstnameLastname", with capitalization as shown (e.g., "JohnSmith"). On as7, if a user's uid in our LDAP directory was JohnSmith and he attempted to log in as johnsmith, authentication would fail due to mismatched case.
    However, since moving to ws7, case is no longer significant - JohnSmith = johnsmith = JoHnSmItH. Is there a way I can configure my ws7 instances to use the old, mixed-case approach? Or is this a known bug in ws7 that is being addressed?
    Thanks,
    Bill

    Yes, I knew this (and even did an ldapsearch to verify it). However, I can say with certainty that on our old server (app server 7) login would fail if the case was not respected.
    So either app server 7 was wrong to restrict logins based on uid case, or web server 7 is wrong not to restrict logins based on case. Since this is UNIX we're talking about here, and not Windoze, I would think case should be significant.
    Thanks,
    Bill

  • Sharing music at home; sharing User IDs

    My wife and I are faced with a problem of playing music from the iTunes library we have built over the past few years either from CDs or from the Apple iTunes Store.
    I recently imported all our Cds into iTunes to save space and allow equal access. Our music now exists on ONE external hard drive. Most music tracks were imported from CDs, and therefore we don't have any restrictions who can play them. But then there is the music that either of us bought before and since married with our different User IDs. This means that music can only be accessed if originally bought by that person and on that authorized Mac.
    So what can we do?
    Is homesharing a good option? is it a viable option? Doesn't this require both Macs to be open at the same time to enjoy the music? What happens if I go to work with the music hard drive, and my wife needs to listen to tracks? I'd like to clone our music drive so she can access music in this situation, but it wouldn't allow her to listen to music I bought.
    Placing all the music on one hard drive makes it easier to consolidate your library, but only if you can access all the music.
    What have couples done in the past? Once married, do they create a 'couples' ID and buy music together for the home? Do you authorize your computers to that new account? And if so, what about the older music bought with older User IDs?
    How do people work around the authorization problem as well?
    Maybe the solution is to create non DRM versions of all our music and then we might be ok? Is that the only solution?
    I'd appreciate any thoughts on this matter.
    M
    ps: EULA has destroyed the idea of sharing. Piracy is so much easier with digital files, but knowing that parents can't hand down their music or films etc to their kids is very sad.

    You seem to be making quite a few incorrect assumptions in your post.
    MarcusOne wrote:
    But then there is the music that either of us bought before and since married with our different User IDs. This means that music can only be accessed if originally bought by that person and on that authorized Mac.
    Why do you think it means that? (it doesn't)
    So what can we do?
    Keep the music on a hard drive at home.
    Is homesharing a good option? is it a viable option? Doesn't this require both Macs to be open at the same time to enjoy the music?
    Yes.
    What happens if I go to work with the music hard drive, and my wife needs to listen to tracks?
    "The hard drive"? As in a single hard drive? Don't you each have hard drives on own computers? She can listen to all the tracks in her library.
    I'd like to clone our music drive so she can access music in this situation, but it wouldn't allow her to listen to music I bought.
    Why do you think this? iTunes purchases have been DRM free for almost 5 years.
    And even with DRM, just authorize the computer for each others account (which is automatically done when you enable Home Sharing).
    What have couples done in the past? Once married, do they create a 'couples' ID and buy music together for the home?
    Personally, I would not recommend it. Keep the accounts you have. No sense in tossing another into the mix.
    And if so, what about the older music bought with older User IDs?
    Just play it.
    but knowing that parents can't hand down their music or films etc to their kids is very sad.
    Why can't they?

  • Exporting the user IDs from R/3 to a flat file

    I need to generate a flat file with all the user IDs from an ABAP system. How can I do that? is there something available out-of-the-box or I need to develop something?
    Also, is there a quick way to bering all the user IDs from R/3 into the Portal?

    Hi,
    Goto SE16 - click on the Table contents button in the screen and execute the table.it will list out the user details - > Edit > Download-> Spreadsheet ->give the name and location for the file.
    REward with points if it is useful
    Regards,
    Sangeetha.A

  • Sharing iTunes library across 2 Windows user IDs

    My Windows XP computer is set up with 2 user accounts. iTunes is installed and all of my music is stored in my Shared Music folder (this folder is in Shared Documents, which is accessible from each user ID).
    I want to be able to use iTunes from either Windows user ID. The problem is that iTunes creates and maintains 2 separate iTunes Music Library.xml files. When I'm logged on (user #1), iTunes uses the xml file in my My Documents folder. When my spouse is logged on (user #2), iTunes uses the xml file in her My Documents folder.
    This is problematic. If I add a new song to iTunes from my Windows ID (and the song file is placed in the Shared Music folder), it is added to my library and xml file. If my spouse logs on and launches iTunes, the song is NOT in her iTunes library. She has to manually add the file from the iTunes Add File to Library command.
    I'd like iTunes to use a single library that both Windows user IDs can use and maintain. I don't want to have to manually try to keep these in sync.
    I can't find any setting in iTunes for this, and the user guide doesn't even mention this topic. Any help is appreciated!!!

    TheMint,
    I think it works like this:
    The setting you describe is where iTunes will store the music files themselves (.aac or .mp3, etc.) However, iTunes creates an index of all of your music, and it uses that index to display all of your music in iTunes. The index file is called iTunes Library.xml
    The index is stored in the My Documents\My Music folder of the user ID you log in as. Apparently, you cannot tell iTunes to store this in a different location.
    So if you create an iTunes library under one Windows user ID, the index is created in that user ID's My Documents\My Music folder. If you then log in as another Windows user ID, iTunes does not see the index that was created by the first Windows user. Thus you do not see any of the music listed in iTunes.

  • How do I copy purchases between 2 itunes libraries on the same computer with different log ins and separate apple user ids?

    How do I copy purchases between 2 itunes libraries on the same computer with different log ins and separate apple user ids?

    Load the library which doesn't contain the songs and drag them into the open iTunes application window. If you need to move them between different computer user accounts, put them into /Users/Shared/.
    (74502)

  • How to restrict attachment of inactive user IDs for forwarding document.

    Dear All,
    We have some temporary IDs in the system which is now inactive in the system. Now in some applications where users select user IDs at their own for forwarding certain document to someone. Erroneously the sometime select the in active IDs. Which result in non delivery of the document.
    Is it possible to rectrict selection of inactive user IDs?
    Regards,
    Abdullah

    Hi
    Try to look at infotype 0105 subtype 0001 for getting active users.
    Ideally all these ID should be active
    if not then they should be another check for Employment Status '3' from Infotype 0000
    Thanks
    RAjdeep

  • Automatic Creation of User IDs

    Does anyone know of a standard SAP report/program that will generate User IDs for personnel records? I have a requirement to define a procedure that will review personel numbers to determine whether or not that personel number has an ID assigned to it. If it does not, then the report/program will generate an ID according to a particular naming convention. And of course, this report/program would assign the correct roles according to the position defined.
    I know that there are reports/programs that will update a user's access as he/she moves from position to position. I am hoping for one that will assist in the ID creation process.
    Maybe this is wishfull thinking on my part....
    I await your reponses!

    Sounds like you want to implement your own ESS (Employee Self-Service) application ...
    Before doing so, it might be advisable to check on what is already available.
    The Business Partner concept is a more general concept (only only restricted to "employees" and "applicants" but also applicable on "customers", "resellers", etc.) which also allows to assign logon data to "business entities".
    So, it would be helpful to know what you actually intend to achieve.
    Cheers, Wolfgang

  • Can I use a common music library across 2 Windows user IDs?

    My Windows XP computer is set up with 2 user accounts. iTunes is installed and all of my music is stored in my Shared Music folder (this folder is in Shared Documents, which is accessible from each user ID).
    I want to be able to use iTunes from either Windows user ID. The problem is that iTunes creates and maintains 2 separate iTunes Music Library.xml files. When I'm logged on (user #1), iTunes uses the xml file in my My Documents folder. When my spouse is logged on (user #2), iTunes uses the xml file in her My Documents folder.
    This is problematic. If I add a new song to iTunes from my Windows ID (and the song file is placed in the Shared Music folder), it is added to my library and xml file. If my spouse logs on and launches iTunes, the song is NOT in her iTunes library. She has to manually add the file from the iTunes Add File to Library command.
    I'd like iTunes to use a single library that both Windows user IDs can use and maintain. I don't want to have to manually try to keep these in sync.
    I can't find any setting in iTunes for this, and the user guide doesn't even mention this topic. Any help is appreciated!!!

    TheMint,
    I think it works like this:
    The setting you describe is where iTunes will store the music files themselves (.aac or .mp3, etc.) However, iTunes creates an index of all of your music, and it uses that index to display all of your music in iTunes. The index file is called iTunes Library.xml
    The index is stored in the My Documents\My Music folder of the user ID you log in as. Apparently, you cannot tell iTunes to store this in a different location.
    So if you create an iTunes library under one Windows user ID, the index is created in that user ID's My Documents\My Music folder. If you then log in as another Windows user ID, iTunes does not see the index that was created by the first Windows user. Thus you do not see any of the music listed in iTunes.

  • How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID promts the previously used email user IDs... Want to disable this feature---How can ot be done ?

    Question
    How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID prompts the previously used email user IDs... Want to disable this feature---How can it be done ?

    *Click the (empty) input field on the web page to open the drop down list
    *Highlight an entry in the drop down list
    *Press the Delete key (on Mac: Shift+Delete) to remove it.
    *http://kb.mozillazine.org/Deleting_autocomplete_entries
    * Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
    * Tools > Options > Privacy > History: "Remember search and form history"
    * https://support.mozilla.com/kb/Remembering+passwords
    * https://support.mozilla.com/kb/Form+autocomplete

  • Different user IDs in UME and ADS, mapping?

    Dear All,
    we want to implement Integrated Windows Authentication for Portal.
    For such a implementation we we've found descirption in the SAP Note: 935644 - "Configuring Kerberos on NW04 against Database User Store"
    The problem is, that we have different user IDs in J2EE Engine and MS ADS user store and the mapping has to be done "via additional UME attribute".
    Anyone know how to implement such a attribute mapping?
    Thanks for help!
    Karol

    Hi,
    I hope you might have done this..If not, follow this link...
    http://help.sap.com/saphelp_nw04/helpdata/en/b7/14d43f2dd44821e10000000a1550b0/content.htm
    Regards
    Krishnan

  • Short dump using CS_BOM_EXPL_MAT_V2 with different user ids

    Hi
    We are getting a short dump in our program when using FM'CS_BOM_EXPL_MAT_V2' and this is happening only for super user roles but not with regular user ids in production. We are not able to identify the solution yet, and it needs to be resolved as quickly as possible. Anyhelp, really appreciated.
    Thanks
    Anil
    Here is our code:
      CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
        EXPORTING
          aumgb                 = 'X'
          capid                 = 'PP01'
          datuv                 = p_valfrm
          ehndl                 = '1'
          emeng                 = 1
          mbwls                 = ' '
          mehrs                 = 'X'
          mmory                 = '1'
          mtnrv                 = p_matnr
          stlal                 = p_stlal
          stlan                 = p_stlan
          werks                 = p_werks
        TABLES
          stb                   = i_stb
          matcat                = i_matcat
        EXCEPTIONS
          alt_not_found         = 1
          call_invalid          = 2
          material_not_found    = 3
          missing_authorization = 4
          no_bom_found          = 5
          no_plant_data         = 6
          no_suitable_bom_found = 7
          conversion_error      = 8
          OTHERS                = 9.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.

    Hi senthil,
    1. I suppose u want to explode the BOM.
    2. CS_BOM_EXPLOSION
       use the above FM
       in the below mentioned fashion.
    3.
      CALL FUNCTION 'CS_BOM_EXPLOSION'
       EXPORTING
       capid                       = 'PP01'
       emeng                       = bmeng
       datuv                       = sy-datum
       mtnrv                       = matnr
       stlan                       = '1'
         werks                       =  werks
         mehrs = 'X'
    IMPORTING
      TOPEQUI                     =
      TOPMAT                      =
      TOPTPL                      =
      DSTST                       =
        TABLES
          stbd                        = stbd
          stbe                        = stbe
          stbk                        = stbk
          stbm                        = stbm
          stbp                        = stbp
          stbt                        = stbt
    EXCEPTIONS
       alt_not_found               = 1
       call_invalid                = 2
       missing_authorization       = 3
       no_bom_found                = 4
       no_plant_data               = 5
       no_suitable_bom_found       = 6
       object_not_found            = 7
       conversion_error            = 8
       OTHERS                      = 9
    regards,
    amit m.

  • By API action, how can I get the list of user IDs within a specific group  (which is created by API) ?

    By API action, how can I get the list of user IDs within a
    specific group (which is created by API) ?
    or How can I get the group (which is I create by API) ID to
    which a specific user belong by API action?
    Thanks
    Alex

    The poster already posted at the Acrobat Users Community, Interactive Forms that sums up a client order from catalog. The sample form posted to Acrobat.com was a revision of the sample form that came with Acrobat 4.0. There are some fairly advance scripts, templates, and document level functions involved with this form.

  • Saved logons (user ids & password) are not filling out logons

    I have user ids and passwords saved but when I navigate to the site for which the user id and password are saved, the logon fields are no longer being filled.
    These are valid logons which worked under older versions of Firefox.
    I've looked for any settings I may have missed and have found nothing different between 4.0 and 3.6

    Ok, this seems to be a long and convoluted path to do absolutely nothing.
    You submit the form.
    You run a servlet that gets the parameters correctly (good), creates a SimpleBean (good) and then sets this into request attribute space under the names "user" and "pass" - (why?)
    You then forward to the jsp: submit.jsp.
    Submit.jsp creates a new SimpleBean, and attempts to populate it with <jsp:setProperty>. You then call the issueData method on it.
    Your complaint: Rows are being created in the database which have empty string values instead of the parameters you have passed.
    So, why are the values blank? Where do you think these values should be coming from?
    Looking at SimpleBean we find one mistake - you have mis-named your get/set methods.
    To properly follow java beans standards, you should use camel-case for your methods.
    Rather than getuserName() the method should be getUserName(). getpassword() should be getPassword() etc etc.
    The method getUserName() defines a property "userName" for the bean.
    Once that is fixed, lets go to submit.jsp. The <jsp:setProperty> statement will try and set all properties of the bean from the request parameters.
    There are no request parameters "userName" or "password" so those values don't get set in the bean, therefore it uses their default value of empty string - "".
    There ARE request parameters called "user" and "pass" but because they aren't properties of the bean, they get ignored.
    As a result, the values are empty string, and that is exactly what gets inserted into the database.
    Ways to fix this
    1 - rename your parameters on your form to be "userName" and "password" to match the bean. That way the <jsp:setProperty> tag will populate them properly.
    or
    2 - Call issueData() method from your servlet after you have created the SimpleBean. Better in my opinion as you then don't have any scriptlet code on a JSP page.
    Cheers,
    evnafets

  • How to display user ids having non aplabetics

    Hi,
    I want to display user ids which are having non alphabetics.
    CREATE TABLE TEST(USERID) AS
    select 'ALINDSTRÖM' from dual union all
    select 'ANÄSVALL' from dual union all
    select 'JAMES' from dual union all
    SELECT 'BLINDÉN' FROM DUAL UNION ALL
    SELECT 'SEKHAR' FROM DUAL;
    Expected output is:
    USERID
    ALINDSTRÖM
    ANÄSVALL
    BLINDÉN
    Abover id's having non alphabetics like Ö,Ä,É. Please help me.
    Iam using oracle 10g

    SQL> CREATE TABLE TEST
      2  as
      3 
      3  select 'ALINDSTRÖM' userid from dual union all
      4  select 'ANÄSVALL' from dual union all
      5  select 'JAMES' from dual union all
      6  SELECT 'BLINDÉN' FROM DUAL UNION ALL
      7  SELECT 'SEKHAR' FROM DUAL
      8  ;
    Table created
    SQL> select userid
      2  from test
      3  where regexp_instr(userid,'[^A-Z]',1,1) > 0
      4  ;
    USERID
    ALINDSTRÖM
    ANÄSVALL
    BLINDÉN

Maybe you are looking for