User in blackberry manager more than once

I have a user that has two blackberries and would like to receive email to both of these from the same email account, Can I do this?
will blackberry manager let me have the same user twice?
Thanks for the responses

Sounds like this user is on the BES if your talking about the BlackBerry Manager, and if you are, this is not possible. You can activate two pop3/imap accounts though.
If someone helped you give them kudos. Research all info!

Similar Messages

Prevent user from resetting password more than once in a day

Hi,
1) my requirement is that, i want to prevent a user from resetting his password more than once in a day in OIM 11g.
i guess that has to be implemented using a pre-process event handler on reset password page.
is that achieveable? i dont have much idea on which places i can attach a pre-process event handler to.
2) I want to restrict a user from using sequential passwords. eg: abhi1, abhi2, abhi3
This is not present OOTB. just want to know. can we do it via custom code.? but this will expose that password (security breach- which i dont want)
is there any way i can achieve this via configurations in OIM or some event handler.?
Thanks in advance.

1.yes, update "Minimum Password Age" to 1 for the password policy.
2. you can't achieve this by configuration. But, yes write an event handler and put your validation there. probably this is required on manual create or update so use pre-insert and pre-update eventhandler for validation.
--nayan

Weblogic.management.server bound more than once?

Sorry if I already posted this in cluster, but I realized that it should belong here instead....
I have an admin server that does not belong in any cluster. I set up 2 managed server (app01,
app02) targetted to "app cluster". I can start up app01 or app02 by itself, when when I start both
up, I get the following message on both managed servers; the admin server, on the other hand, does
not display any errors. Why are the managed servers trying to bind weblogic.management.server to
jndi????
<Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster> <Adding
server -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to cluster view>
<Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster>
<Adding -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to the cluster>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.server in the jndi tree. The object you have bound
weblogic.management.internal.RemoteMBeanServerImpl from fortran is non clusterable and you have
tried to bind more than once from two or more servers. Such objects can only deployed from one
server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.server in the jndi tree. The object you have bound
weblogic.management.internal.RemoteMBeanServerImpl_WLStub from fortran-1 is non clusterable and you
have tried to bind more than once from two or more servers. Such objects can only deployed from one
server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.adminhome in the jndi tree. The object you have bound
weblogic.management.internal.AdminMBeanHomeImpl from fortran is non clusterable and you have tried
to bind more than once from two or more servers. Such objects can only deployed from one server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.adminhome in the jndi tree. The object you have bound
weblogic.management.internal.AdminMBeanHomeImpl_WLStub from fortran-1 is non clusterable and you
have tried to bind more than once from two or more servers. Such objects can only deployed from one
server.>
Gene

Prasad diagnosed the problem. Look in clustering under the same title if you're interested!
Gene
"Gene Chuang" <[email protected]> wrote in message news:[email protected]...
Sorry if I already posted this in cluster, but I realized that it should belong here instead....
I have an admin server that does not belong in any cluster. I set up 2 managed server (app01,
app02) targetted to "app cluster". I can start up app01 or app02 by itself, when when I startboth
up, I get the following message on both managed servers; the admin server, on the other hand,does
not display any errors. Why are the managed servers trying to bind weblogic.management.server to
jndi????
<Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster> <Adding
server -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to cluster view>
<Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster>
<Adding -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to the cluster>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.server in the jndi tree. The object you have bound
weblogic.management.internal.RemoteMBeanServerImpl from fortran is non clusterable and you have
tried to bind more than once from two or more servers. Such objects can only deployed from one
server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.server in the jndi tree. The object you have bound
weblogic.management.internal.RemoteMBeanServerImpl_WLStub from fortran-1 is non clusterable andyou
have tried to bind more than once from two or more servers. Such objects can only deployed fromone
server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.adminhome in the jndi tree. The object you have bound
weblogic.management.internal.AdminMBeanHomeImpl from fortran is non clusterable and you have tried
to bind more than once from two or more servers. Such objects can only deployed from one server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.adminhome in the jndi tree. The object you have bound
weblogic.management.internal.AdminMBeanHomeImpl_WLStub from fortran-1 is non clusterable and you
have tried to bind more than once from two or more servers. Such objects can only deployed fromone
server.>
Gene

Powershell and Client Object Model - no error thrown if user is added more than once to same site or group

Hello All -
I am trying to add a user to a SharePoint site using PowerShell like below:-
New-SPUser -UserAlias MyDomain\jan20a -Web http://SPServer/sites/MySite
If I execute the above more than once, SharePoint does not throw that user already exists or something. This is not the same behavior in AD/Exchange PowerShell cmdlets.
Also, even the client object model behaves the same way.
Another interesting thing I noticed, I tried to remove a user from group in which the user was not part of it at all and still no error..!!
Looks like SharePoint does not care of invalid input and just ignores it.
Can anyone please confirm this and also the reason behind it ?

It's not really invalid input, since the user exists and that is how SharePoint behaves (will behave same way in browser). Try to input a user that and misspell the name, e.g. say you didn't have a MyDomain\Jan21a, then try to use same script above,
only with invalid data. It will bark at you. Or try using a web that it cannot find, one that does not exist. You'll get what I like to call, the red badge of courage if you enter invalid data.
you can test that sharepoint will let you enter a user twice in the browser, and nothing bad comes from it. Powershell is just unable to tell that the user was not in the site, when you removed it the second time.
Hope that confirms it, if it does please mark this reply accordingly. thanks
Stacy Simpkins | MCSE SharePoint | www.sharepointpapa.com

How to retrict user cannot open the same form more than once (Forms 6i)

Our users always open the same forms more than once. For example the customer form, the user may access a customer record in the first form, however, he will open a new customer form to edit the same record, the result is he cannot save the record because the record is locked in the first customer form.
How can I control the user cannot open the same form more than 1 time.
Best Regards,
Kane

The customer form is only an example, I found there will cause a lot of problems is I cannot control the user from calling 1 program more than 1 than within application. Sometimes a user (not good in using computer) will overlap the form for many times.....
Is there any simple way to do that?...can I have some PL/SQL statement or build-in functions that let me easily found our what forms the user has already opened, then I can control whether I let him open this form or not.
Urgent...please
Thanks

After Upgrade Cloud Control from 12.1.0.3 to 12.1.0.4 the user name and password have to be entered more than once

Hi everybody,
we recently upgraded our Cloud Control from 12.1.0.3 to 12.1.0.4.
Now we have the following, a little bit strange behaviour.
Everytime we want to log into Cloud Control we have to enter our password more than once.
Sometimes even more than twice.
It alawys says user name and password are required
Does anybody has the same problem?
I didn't found anything on MOS. So any advice or answer is appreciated.
Greetings,
Daniel

Hi Daniel,
We have seen similar issue when we use non-certified browsers for accessing 12c console
Use certified versions of IE with EM 12.1.0.4 Cloud Control. for instance, Microsoft Internet Explorer 10.*, 9.*, 9 and 8 versions only.
This document can help you to understand the Certified Browsers:
<<Doc ID 1912367.1>> EM12c : Supported Browsers and Adobe Flash Players list
Regards,
Rahul

How to use same page fragment more than once in a page,

Hi Gurus,
How to use same page fragment more than once in a page. I have a complex page fragment which has lots of Bindings (Binding Property set with backingBean variables).
I want to use the same page fragment multiple times on the same page with different tabs.
I want different ApplicationModule Instance for the page fragment in different tabs.
So I have created a Bounded Taskflow with pagefragments which has this complex pagefragment.
I've dragged the taskflow to page and created regions.
I'm able to execute the page successfully when I have only one region but fails if I have region more than once in the page.
Can anyone help me how to resolve this issue.
Web User Interface Developer's Guide for Oracle Application Development Framework: section 19-2 states we can have same pagefragment more than once in a page.
Thanks,
Satya

java.lang.IllegalStateException: Duplicate component id: 'pt1:r1:0:t2:si5', first used in tag: 'com.sun.faces.taglib.jsf_core.SelectItemsTag'
+id: j_id_id1
type: javax.faces.component.UIViewRoot@1d23189
+id: d1
   type: RichDocument[UIXFacesBeanImpl, id=d1]
    +id: j_id_id5
     type: HtmlScript[UIXFacesBeanImpl, id=j_id_id5]
      +id: j_id0
       type: javax.faces.component.html.HtmlOutputText@bc252
    +id: m1
     type: RichMessages[UINodeFacesBean, id=m1]
    +id: f1
     type: RichForm[UIXFacesBeanImpl, id=f1]
      +id: pt1
       type: RichPageTemplate[oracle.adf.view.rich.component.fragment.UIXInclude$ContextualFacesBeanWrapper@2a0cc, id=pt1]
        +id: ps1
         type: RichPanelSplitter[UIXFacesBeanImpl, id=ps1]
          +id: pt3
     at javax.faces.webapp.UIComponentClassicTagBase.doStartTag(UIComponentClassicTagBase.java:1199)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag265(__projectrevenuern_jsff.java:12356)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag264(__projectrevenuern_jsff.java:12317)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag263(__projectrevenuern_jsff.java:12262)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag262(__projectrevenuern_jsff.java:12200)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag261(__projectrevenuern_jsff.java:12147)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag260(__projectrevenuern_jsff.java:12099)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag259(__projectrevenuern_jsff.java:12047)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag258(__projectrevenuern_jsff.java:11992)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag257(__projectrevenuern_jsff.java:11948)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag255(__projectrevenuern_jsff.java:11860)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag254(__projectrevenuern_jsff.java:11808)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag9(__projectrevenuern_jsff.java:510)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag8(__projectrevenuern_jsff.java:461)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag1(__projectrevenuern_jsff.java:149)
     at jsp_servlet.__projectrevenuern_jsff._jspService(__projectrevenuern_jsff.java:67)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
     at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:429)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
     at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:443)
     at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:153)
     at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:128)
     at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:492)
     at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag50(__projectrevenuepg_jspx.java:2392)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag49(__projectrevenuepg_jspx.java:2353)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag46(__projectrevenuepg_jspx.java:2209)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag45(__projectrevenuepg_jspx.java:2162)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag9(__projectrevenuepg_jspx.java:526)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag8(__projectrevenuepg_jspx.java:475)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag7(__projectrevenuepg_jspx.java:424)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag6(__projectrevenuepg_jspx.java:373)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag2(__projectrevenuepg_jspx.java:202)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag1(__projectrevenuepg_jspx.java:144)
     at jsp_servlet.__projectrevenuepg_jspx._jspService(__projectrevenuepg_jspx.java:71)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:248)
     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:267)
     at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:473)
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:141)
     at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:710)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = CAMIND1 TXID = CONTEXTID = TIMESTAMP = 1262712477691
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
<JMXWatchNotificationListener><handleNotification> failure creating incident from WLDF notification
oracle.dfw.incident.IncidentCreationException: DFW-40116: failure creating incident
Cause: DFW-40112: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\tammineedis\\Application] at column [69]
DIA-48447: The input path [C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
DIA-48494: ADR home is not set, the corresponding operation cannot be done
Action: Ensure that command line tool "adrci" can be executed from the command line.
     at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:708)
     at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createIncident(DiagnosticsDataExtractorImpl.java:246)
     at oracle.dfw.spi.weblogic.JMXWatchNotificationListener.handleNotification(JMXWatchNotificationListener.java:195)
     at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor$ListenerWrapper.handleNotification(DefaultMBeanServerInterceptor.java:1732)
     at javax.management.NotificationBroadcasterSupport.handleNotification(NotificationBroadcasterSupport.java:257)
     at javax.management.NotificationBroadcasterSupport$SendNotifJob.run(NotificationBroadcasterSupport.java:322)
     at javax.management.NotificationBroadcasterSupport$1.execute(NotificationBroadcasterSupport.java:307)
     at javax.management.NotificationBroadcasterSupport.sendNotification(NotificationBroadcasterSupport.java:229)
     at weblogic.management.jmx.modelmbean.WLSModelMBean.sendNotification(WLSModelMBean.java:824)
     at weblogic.diagnostics.watch.JMXNotificationProducer.postJMXNotification(JMXNotificationProducer.java:79)
     at weblogic.diagnostics.watch.JMXNotificationProducer.sendNotification(JMXNotificationProducer.java:104)
     at com.bea.diagnostics.notifications.JMXNotificationService.send(JMXNotificationService.java:122)
     at weblogic.diagnostics.watch.JMXNotificationListener.processWatchNotification(JMXNotificationListener.java:103)
     at weblogic.diagnostics.watch.Watch.performNotifications(Watch.java:621)
     at weblogic.diagnostics.watch.Watch.evaluateLogRuleWatch(Watch.java:546)
     at weblogic.diagnostics.watch.WatchManager.evaluateLogEventRulesAsync(WatchManager.java:765)
     at weblogic.diagnostics.watch.WatchManager.run(WatchManager.java:525)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.dfw.common.DiagnosticsException: DFW-40112: failed to execute the adrci commands "create home base=C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr product_type=ofm product_id=defaultdomain instance_id=defaultserver
set base C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr
set homepath diag\ofm\defaultdomain\defaultserver
create incident problem_key="BEA-101020 [HTTP]" error_facility="BEA" error_number=101020 error_message="null" create_time="2010-01-05 12:27:58.155 -05:00" ecid="0000INzXpbB7u1MLqMS4yY1BGrHn00000K"
Cause: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\tammineedis\\Application] at column [69]
DIA-48447: The input path [C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
DIA-48494: ADR home is not set, the corresponding operation cannot be done
Action: Ensure that command line tool "adrci" can be executed from the command line.
     at oracle.dfw.impl.incident.ADRHelper.invoke(ADRHelper.java:1052)
     at oracle.dfw.impl.incident.ADRHelper.createIncident(ADRHelper.java:786)
     at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:688)
     ... 19 moreI get the above Error.
I have checked the bindings and it has 2 instances of the taskflow.
I have changed the backingbean scope to backingBean

Can I manage more than one iTouch from one PC?

A family member has an iTouch managed with iTunes on PC. Another family member would like an iTouch but does not have a computer.
Can one manage more than one iTouch from one PC? How? Does one install separate instances of iTunes somehow on the PC for each device?
There is also the desire to have separate Apple Store accounts for each device. We don't what synced devices.

*How to use multiple iPods with one computer*
The Apple support document How to use multiple iPods with one computer suggests a number of ways. I use method two (Sync with selected playlists) with a slight twist. Rather than regular playlists I set the grouping field to indicate which users should receive which tracks and create smart playlists based on the content of this field.
e.g.
"Alice's Tracks" is "Grouping contains Alice" + "Kind contains audio"
"Bob's Videos" is "Grouping contains Bob" + "Kind does not contain audio"
Tracks that both Alice & Bob want on their iPods have the grouping set to "Alice/Bob"
etc.
I currently manage our family's five iPods using this system, each getting a different selection to suit their tastes and the capacity of their iPod. An advantage of using the grouping field is that it is stored in file tags (for non-wav audio files anyway) so that it is relatively easy to recreate the playlists should the iTunes library get trashed. Also useful if you move files about manually as playlist membership is preserved when you delete & re-import the tracks.
tt2

Can you create a form in which its never possible for the same person te sign the form more than once.

Hi, I've been looking into this for awhile and believe the answer is 'no' but was just wondering if anyone here would know of a solution.
The company I work for has a formulier on which a number of Excel files are placed. This form is then sent to a five (often different) people who are then required to open the Excel files and if accord to place their digital signature. We would like to make sure that no one is able to sign the form more than once and also if possible to make sure they have opened the Excel files. It would be great if anyone had any tips...
All the very best,
Martin Angell

I am not an Excel or Excel-to-PDF conversion expert, so I do not know how Excel forms are converted to PDF form fields. With this caveat here's what I do know.
In Acrobat It is possible to create a PDF form in which there are JavaScripts associated with fields (any fields, including signature fields). These JavaSripts can do a lot of things, including checking the signer's certificates on the already signed signature fields. Then you can make all unsigned signature fields read-only, in which case the user will not be able to actually sign them. After that you can overlay a button field on top of each unsigned signature field with exactly the same dimensions and associate a JavaAcript with this button field. This JavaScript would put up an UI asking the user for the signing certificate and its password, check this certificate's CN against the list of already signed signature fields and initiate the signing of the unsigned signature field behind this button if your condition is satisfied.
I never tried that myself but it could work. This looks complicated and it is but if you really want it you can try.

Button/click box click more than once

Hi, I'm hoping you guys can point out what I'm doing wrong...
I have an image where the user can click on certain parts of
it to display a callout. However, I want them to be able to click
on the area of the image more than once if requried. I suppose you
can say it's a bit like an image map.
First I used click boxes to achieve this, then I tried using
transparent buttons. However for both of these methods you can only
click on each part once during playback. Clicking again does not
show the callout.
I thought about copying the contents to another slide and add
a 'Reset' button the user could click on. This would move to the
other slide, but this seems a bit on the 'clunky' side, so I
thought there must be a setting or something really obvious that I
have missed. I was unable to find the relevant informaiton in the
help file or elsewhere in the forum, so if it does exist I would
appreciate someone pointing me in the right direction.
How can I allow the user to click on parts of the image more
than once to show the callout?
Thanks for your help,
Liz

Thanks for your reply Rick.
I started the activity using rollovers, but I wanted the user
to do something more definite than just hovering over each part of
the image. So essentially, I want the rollover functionality but
with the ability to click instead of just hovering the cursor over.
I thought this would be easy!
I've tried using both buttons and click boxes without any
success. I ventured a little into slidelets, but I want the callout
to appear in a very specific place and this did not appear to
satisfy my requirements. The 'click to stick' sounds intriguing so
I'll take a look into this, but I'm not convinced it's what I want.
Any more suggestions are most welcome.
Regards
Liz

Method called more than once - and dies with EXC_BAD_ACCESS error

Hi,
In my app, I have 4 views with their respective viewControllers. In the appDelegate.m, I provide methods that allows to switch to any of these views. Following is code for switching to the editView:
-(void) flipToEditView {
[self populateTheList]; // populate an array
EditViewController *anEditVC = [[EditViewController alloc] initWithNibName:@"EditView" bundle:nil];
[self setEditVC:anEditVC];
[viewController.view removeFromSuperview];
[self.window addSubview:[editVC view]];
[anEditVC release]; }
The view is not switched - and moreover, this method is called more than once; and the app dies with EXCBADACCESS!
2009-08-23 14:54:40.648 iNotate[2128:20b] Album (before): x= 0 y=20 width=320 height=460
2009-08-23 14:54:40.653 iNotate[2128:20b] Album (after): x= 0 y= 0 width=320 height=480
warning: Couldn't find minimal bounds for "_sigtramp" - backtraces may be unreliable
(gdb) bt
#0 -[iNotateAppDelegate flipToEditView] (self=0x523690, _cmd=0x9563) at /Users/sam/MY_FILES/iPhone Apps/app/Classes/iNotateAppDelegate.m:116
#1 0x00008661 in -[FirstView editAction] (self=0x546a30, _cmd=0xac94) at /Users/sam/MY_FILES/iPhone Apps/app/FirstView.m:25
#2 0x30a4eee6 in -[UIApplication sendAction:to:from:forEvent:] ()
#3 0x30ab0d36 in -[UIControl sendAction:to:forEvent:] ()
#4 0x30ab11fe in -[UIControl(Internal) _sendActionsForEvents:withEvent:] ()
#5 0x30ab0544 in -[UIControl touchesEnded:withEvent:] ()
#6 0x30a67917 in -[UIWindow sendEvent:] ()
#7 0x30a56fff in -[UIApplication sendEvent:] ()
#8 0x30a561e0 in _UIApplicationHandleEvent ()
#9 0x31565dea in SendEvent ()
#10 0x3156840c in PurpleEventTimerCallBack ()
#11 0x94a713c5 in CFRunLoopRunSpecific ()
#12 0x94a71aa8 in CFRunLoopRunInMode ()
#13 0x31566600 in GSEventRunModal ()
#14 0x315666c5 in GSEventRun ()
#15 0x30a4eca0 in -[UIApplication _run] ()
#16 0x30a5a09c in UIApplicationMain ()
#17 0x000027e8 in main (argc=1, argv=0xbffff068) at /Users/sam/MY_FILES/iPhone Apps/app/main.m:14
Current language: auto; currently objective-c
(gdb) continue
2009-08-23 14:54:55.885 iNotate[2128:20b] >>>>>>>>>>>>>>>>>> populateTheList
(gdb) bt
#0 -[iNotateAppDelegate flipToEditView] (self=0x523690, _cmd=0x9563) at /Users/sam/MY_FILES/iPhone Apps/app/Classes/iNotateAppDelegate.m:116
#1 0x00008661 in -[FirstView editAction] (self=0x5457b0, _cmd=0xac94) at /Users/sam/MY_FILES/iPhone Apps/app/FirstView.m:25
#2 0x30a4eee6 in -[UIApplication sendAction:to:from:forEvent:] ()
#3 0x30ab0d36 in -[UIControl sendAction:to:forEvent:] ()
#4 0x30ab11fe in -[UIControl(Internal) _sendActionsForEvents:withEvent:] ()
#5 0x30ab0544 in -[UIControl touchesEnded:withEvent:] ()
#6 0x30a67917 in -[UIWindow sendEvent:] ()
#7 0x30a56fff in -[UIApplication sendEvent:] ()
#8 0x30a561e0 in _UIApplicationHandleEvent ()
#9 0x31565dea in SendEvent ()
#10 0x3156840c in PurpleEventTimerCallBack ()
#11 0x94a713c5 in CFRunLoopRunSpecific ()
#12 0x94a71aa8 in CFRunLoopRunInMode ()
#13 0x31566600 in GSEventRunModal ()
#14 0x315666c5 in GSEventRun ()
#15 0x30a4eca0 in -[UIApplication _run] ()
#16 0x30a5a09c in UIApplicationMain ()
#17 0x000027e8 in main (argc=1, argv=0xbffff068) at /Users/sam/MY_FILES/iPhone Apps/app/main.m:14
(gdb) continue
2009-08-23 14:55:22.493 iNotate[2128:20b] >>>>>>>>>>>>>>>>>> populateTheList
Program received signal: “EXCBADACCESS”.
(gdb) continue
What's happening here?
Sam!

-(void) flipToEditView {
[self populateTheList]; // populate an array
EditViewController *anEditVC = [[EditViewController alloc] initWithNibName:@"EditView" bundle:nil];
[self setEditVC:anEditVC];
[viewController.view removeFromSuperview];
[self.window addSubview:[editVC view]];
[anEditVC release]; }
}<---- is this } matched elsewhere?

Custom Administrative Template Error 53 Key name specified more than once

Hi All,
Hope I've picked the correct forum. I am making my first foray into setting up a custom administrative template for some software that is developed in house. The current deployment method is to merge a reg file on each computer that requires the registry
settings. I am trying to set this up so that it is controlled via GPO.
My idea is that in the a GP can set the registry settings for one or more areas that are controlled by the software.
The problem I have - I get Error 53 Keyname specified more than once on Line 9 (second KEYNAME). In total I will have about 30 different sites this needs to be set up for.
Does this mean that I can't set more than one registry key per "Policy" setting in the GPO?
The adm file I have so far is below
TIA
Jason
---------------------------------------------CUT---------------------------------------------
CLASS User
CATEGORY "App Site Settings"
POLICY !!Site1Policy
EXPLAIN !!Site1Explain
KEYNAME "Software\ApplicationCompany\Site1\Access"
VALUENAME "SystemDatabase"
VALUEON "D:\\App\\Data\\App.mdw"
VALUEOFF DELETE
KEYNAME "Software\ApplicationCompany\Site1\Arbitration"
VALUENAME "ConfigPath"
VALUEON "D:\\Site1\\Data"
VALUEOFF DELETE
KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
VALUENAME "ConfigFile"
VALUEON "D:\\App\\Data\\App_Comms.mdb"
VALUEOFF DELETE
VALUENAME "SysConfig"
VALUEON "D:\\Site1\\Data\\SITE1_SYS.mdb"
VALUEOFF DELETE
END POLICY
POLICY !!Site2Policy
EXPLAIN !!Site2Explain
KEYNAME "Software\ApplicationCompany\Site2\Access"
VALUENAME "SystemDatabase"
VALUE "D:\\App\\Data\\App.mdw"
KEYNAME "Software\ApplicationCompany\Site2\Arbitration"
VALUENAME "ConfigPath"
VALUE "D:\\Site2\\Data"
KEYNAME "Software\ApplicationCompany\Site2\Common Settings"
VALUENAME "ConfigFile"
VALUE "D:\\App\\Data\\App_Comms.mdb"
VALUENAME "SysConfig"
VALUE "D:\\Site2\\Data\\Site2_SYS.mdb"
END POLICY
END CATEGORY
[strings]
Site1Policy = "Site1 settings"
Site1Explain = "Enabling this setting configures the registry settings for dummy Site1."
Site2Policy = "Site2 settings"
Site2Explain = "Enabling this setting configures the registry settings for dummy Site2."

Well - I ended up sorting this out - and no - you can't have the Keyname keyword twice - unless you enclose the the setting in a PART statement. Below is what I ended up with:
---------------------------------------------CUT---------------------------------------------
CLASS USER
CATEGORY "ApplicationSettings"
KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
POLICY !!SITE1Policy
#if version >= 3
EXPLAIN !!PolicyExplain
#endif
KEYNAME "Software\ApplicationCompany\Site1\Access"
PART !!ConfigFilePolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
VALUENAME ConfigFile
DEFAULT !!ConfigFileDefault
END PART ;!!ConfigFilePolicy
PART !!SystemDBPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Access"
VALUENAME SystemDatabase
DEFAULT !!SystemDBDefault
END PART ;!!SystemDBPolicy
PART !!SysConfigPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Common Setting"
VALUENAME SysConfig
DEFAULT !!SysConfigDefault
END PART ;!!SysConfigPolicy
PART !!ArbitrationPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Arbitration"
VALUENAME ConfigPath
DEFAULT !!ArbitrationDefault
END PART ;!!ArbitrationPolicy
END POLICY
POLICY !!SITE2Policy
#if version >= 3
EXPLAIN !!PolicyExplain
#endif
KEYNAME "Software\ApplicationCompany\Site2\Access"
PART !!ConfigFilePolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Common Settings"
VALUENAME ConfigFile
DEFAULT !!ConfigFileDefault
END PART ;!!ConfigFilePolicy
PART !!SystemDBPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Access"
VALUENAME SystemDatabase
DEFAULT !!SystemDBDefault
END PART ;!!SystemDBPolicy
PART !!SysConfigPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Common Setting"
VALUENAME SysConfig
DEFAULT !!SysConfigDefault
END PART ;!!SysConfigPolicy
PART !!ArbitrationPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Arbitration"
VALUENAME ConfigPath
DEFAULT !!ArbitrationDefault
END PART ;!!ArbitrationPolicy
END POLICY
END CATEGORY
[Strings]
ArbitrationDefault =D:\SITE\Data
ArbitrationPolicy =Arbitration path
ConfigFileDefault =D:\App\Data\App_Comms.mdb
ConfigFilePolicy =Application configuration file
PolicyExplain =Enter Explainition of the Registry settings here
SysConfigDefault =D:\SITE\Data\SITE1_SYS.mdb
SysConfigPolicy =Application site system configuration file
SystemDBDefault =D:\App\Data\App.mdw
SystemDBPolicy =Application system database path
SITE1Policy =Site1 Application Settings
SITE2Policy =Site2 Application Settings

How to call the same query more than once with different selection criteria

Hi,
Please do anybody know how to solve this issue? I need to call one query with the fixed structure more than once with different selection criteria. For example. I have following data
Sales organization XX
                     Income 2008 Income 2009
Customer A       10                 20
Customer B        30                  0
Sales organization YY
                     Income 2008 Income 2009
Customer A        20                5
Customer B        50                10
Now, I need this. At the selection screen of query, user fill variable charakteristic "Sales organization" with interval XX - YY, than I need to generate two separate results per sales organization, one for Sales Organization XX and the second for SO YYwhich will be displayed each on separate page, where result for SO YY will be dispayed under result for SO YY. Are there some options how to do it for example in Report Designer or WAD or with programming? In Report Designer is possible to use one query more than once, but I dont know how to force each query in RD to display result only for one Sales Organization, which will be defined in selection screen.
Thank you very much
J.

Hello,
thanks to all for cooperation. Finally we solved this issue with the following way..
User fill appropriate SO on the selection screen, which is defined as range. This will resulte, that selected SO are listed in report below each othe (standard behavior). Required solution we achieved with the Report Designer, we set page break under each Result row of RD. This caused, that report is divided into required part per SO, which are stated each on separate page.
J.

AddOn: Prevent from loading more than once

Good Afternoon
Experts:
I appreciate you patience as I resurrect this topic since it has become an
increasing concern here. We need a way to restrict our AddOn from "being in"
Task.mgr more than once. We are working with Terminal Services. A couple ways we have found more than one instance in TM is the User just opening another session or opening another session after a "problem/Issue/Crash".
I have this code which restricts the AddOn from starting more than once here on my local machine:
Public Sub Main()
        Try
            Dim x As Integer = 0
            Dim Ctr As Integer = 0
            Dim som() As System.Diagnostics.Process
            som = System.Diagnostics.Process.GetProcesses
            Dim Name As String
            For x = 0 To som.Length - 1
                Name = som(x).ProcessName.ToUpper
                If som(x).ProcessName = "Test.Enhance" Then
                    Ctr += 1
                End If
            Next x
            If Ctr > 0 Then
                MsgBox("LBSI.Enhance AddOn is already started...Exiting application.", MsgBoxStyle.Critical)
                Exit Try
            Else
                ReInitializeAddOn()
                Application.Run()
            End If
        Catch ex As Exception
            HandleException("Main", ex, True)
        End Try
    End Sub
Is there a better more elegant way to do this? How about for Terminal Services?
Thanks in advance for your insight,
EJD

Not answered...so I will close.

How can I get a E3000 or E4200 to manage more than 5 devices

How can I get a E3000 or E4200 to manage more than 5 devices? Come on Cisco, lets get real. EVERYONE has more than 5 devices to manage. The average family of 4 has 3 or 4 computers, 4 smart phones and at least a couple of tablets and maybe some TV or game consoles. Setting access control policies is a must for anyone who is a parent.
Does anyone know of a good router that has a reasonable set of access control features? I've always loved Cisco up to this point, but I'm frustrated by this significant limitation.

Fuggedaboutit. Cisco apparently has retreated from the more advanced Internet Access Policy (IAP) to leave users with their paltry Parental Controls (PC) instead. For example the E4200v1 had IAP+PC, and the E4200v2 has only PC.
And good luck trying to find a E4200v1. I spent the last week, ordered 3 of them from different sources, and every one of them was a V2 inside of a V1 box, even the last one I ordered directly from Linksys!
That's a very bizarre marketing scam they're pulling there. The sad thing is that I actually want to keep using their product line, but they are doing their best to push me away.
I too am now regrouping and looking for a competitor who does 2 things well:
(A) High performing dual-band wireless access point, w/ pswd-protected guest-mode
(B) Reliable & fairly full-featured Internet access control (parental control)
My basic requirements for "B" are:
(1) Allow restrictions by IP or better yet MAC address (Cisco PC's hostname list didn't work for me)
(2) Device list of at least 12 devices (obviously family size varies but Cisco's 5 is a joke)
(3) Restricty by days of week and time of day (hourly or half-hourly would be nice)
(4) Restrict by URL's and keywords, at least 12 per device or policy/rule
I wonder if there's a home router whose stock OS, meets these requirements. Otherwise I may have to look into using DD-WRT or similar.

User in blackberry manager more than once

Similar Messages

Maybe you are looking for