User in secutity filtering but not in OU?

If user is in security filtering of the GPO but not in the OU where GPO is applied will GPO be applied to that user?

nope. it won't

Similar Messages

User receives notification mail but not workitem.

Hi,
i have encountred an issue that one user from his SAP inbox executed workitem many times resulting in a workitem stuck then
he forwarded his workitem to another user.
The other user is receiving notification mails but not workitem.
Plz help me on this issue.
Thnx in advance.
Regards,
satish

Hi Vamshi,
Goto t-code SCOT; double-click SMTP and specify the mail-host and mail-port for the respective mail server.
Make the ‘Node in use’ check box as checked.
Click on the ‘Internet->set’ button under ‘Supported address types’ to specify the email-address of the recipient
Specify the email-address of the recipient who is going to receive the alert mails.
Specify ‘*’ in case of multiple email-ids.
Goto Menu->Settings->Default Domain and specify the domain id of the company.
Save the settings done in SCOT.
Next you need to define the Alert rools.
Regards,
Rajendar K

Super users able to approve but not receive the alerts.

Hello,
When our customer logs into SAP Business One they get loads of alerts regarding approvals as they are in the approval list.
The customer was asking, if they remove themselves from the list of approvals so that they do not get the alerts. As a super user could they still be able to go into approvals to approve. The user was a super user.
This was tested, the result of which showed that if they were to take off their approvals they would not get the message but also they would not be able to approve either.
The customer suggested that this would be a useful addition to SAP if super users could go in to approve but not get all the alerts related to approvals.
Regards,
Andy

Hi,
Account to your description, one your test Exchange account
with POP mode cannot receive emails. If I misunderstand your meaning, please feel free to let me know.
If yes, I’d like to confirm if the issue happens internally or externally. And I also recommend the following troubleshooting:
Check if it can receive emails when you configure the account without POP or IMAP mode.\
Restart your IIS.
Check if the issue happens on others.
Thanks,
Angela Shi
TechNet Community Support

Office deploy to users in Building (A) but not in Building (B)!

We're trying to deploy Office to 60 users, some are in building
A and some are in building B, both are on our network (One Domain) and they can access all of our share folders and our Group
Policy is applied for both, they can ping each other, when we deploy office all of the Users/Computers in building
A gets the upgrade which is uninstalling old version of Office and install Office 2010 32bit, but none in building B gets
the upgrade, already checked building B Users/Computers they can see the Office_Deployment
share and they can read and write, already checked the Resultant Set of Policy
on some Computers in building B,
I can see that the Policy is applied and the
office.bat file is in the startup folder,
but still nothing is installing for all users in building B?
The building B is connected to Building A by a Fiber
Optic and they have very fast internet.
Both building have same Subnet, Gateway.
Any idea why?

I did run the Script manually .. Not running,
I started the setup.exe manually .. installed fine!
FYI .. I was wrong .. some computers in building B got the upgrade fine.
Maybe a Firewall Rules?, I verified that the Firewall is OFF .. but maybe I need to change someting in the Inbound or Outbound Rules?

Read logged in user-works in Delphi7 but not in Delphi 2010

Hi all
I have some code I wrote a while back in Delphi 7 - simple program to read a currently logged in user IDs, read available class definitions, read some user attributes - relatively simple stuff. I am now trying to move to Delphi 2010 and the very same code that works on Delphi 7 does NOT work on Delphi 2010. The code was updated to compile and run on Delphi 2010, so it executes with no errors.
I am using NWDSWhoAmI to get the currently logged in user name and NWDSRead to retrieve user attribute values. On Delphi 7, the code works, all API return "Success" and return correct values. In Delphi 2010, all APIs return "Success" but the code act as if I am not logged in - the username returned is "[Public]" and when I try reading attribute values I get $8884 - RESOLVE SVC FAILED (also may mean I am not authenticated to the NDS tree).
The environment is XP and Novell Client 4.91 on the workstation, NW6.5 on the server (one sever tree). The code runs under the currently logged in user with full admin rights in the tree and Novell Client configuration on both workstations is identical. Any ideas on how to resolve this would be greatly appreciated.
Thanks
Vlad

Vlad,
since both Delphi versions go through the same DLLs it must be a difference
in the code - possibly different variable implementation as 16/32 bit or
signed/unsigned vars
It is good practice to use the NWLibrary defined variable types instead of
native Delphi types.
I have successfully used the same sources in Delphi 4, 5, 6, and 2010
Try my old samples:
http://support.novell.com/techcenter...a20020203.html and my Delphi
version independent Delphi libraries
http://developer.novell.com/wiki/index.php/Delphi-units
Wolfgang
"vladh" <[email protected]> wrote in message
news:[email protected]...
>
> Hi all
> I have some code I wrote a while back in Delphi 7 - simple program to
> read a currently logged in user IDs, read available class definitions,
> read some user attributes - relatively simple stuff. I am now trying to
> move to Delphi 2010 and the very same code that works on Delphi 7 does
> NOT work on Delphi 2010. The code was updated to compile and run on
> Delphi 2010, so it executes with no errors.
> I am using NWDSWhoAmI to get the currently logged in user name and
> NWDSRead to retrieve user attribute values. On Delphi 7, the code works,
> all API return "Success" and return correct values. In Delphi 2010, all
> APIs return "Success" but the code act as if I am not logged in - the
> username returned is "[Public]" and when I try reading attribute values
> I get $8884 - RESOLVE SVC FAILED (also may mean I am not authenticated
> to the NDS tree).
> The environment is XP and Novell Client 4.91 on the workstation, NW6.5
> on the server (one sever tree). The code runs under the currently logged
> in user with full admin rights in the tree and Novell Client
> configuration on both workstations is identical. Any ideas on how to
> resolve this would be greatly appreciated.
> Thanks
> Vlad
>
>
> --
> vladh
> ------------------------------------------------------------------------
> vladh's Profile: http://forums.novell.com/member.php?userid=84546
> View this thread: http://forums.novell.com/showthread.php?t=422167
>

CMC: user must update save but not modify report with webi

Hi experts,
I'm on BO platform 4.0SP2 fp10.
I would like to know if it is possible to enable a user a user to update data in a report, save report but disable it to modify report structure and query.
In a folder the user must be able to update the report and prompt, then he must save it, but I don't want him to modify report with webi.
Thanks
Camillo

Hi Frederique,
By not modifying the report with WebI, do you mean that the user shouldn't have access to WebI Rich Client?
What kind of update would the user have to do on a report once the report is available in a folder?
Yes I mean user shouldn't ha access to webi rich client. He should just view update rint and updated report.
Regards
Camillo

User Discovery attribute added but not showing up in v_R_User

Hi - working in 2007 here. I added two attributes for user discovery, mail and telephoneNumber. v_r_User.mail0 column came in fine but tel # did not show up. Can someone point me to where I should troubleshoot this? Thanks.

Yea, I didn't mention that. The log only said it failed to get the optional attributes. It ended up being right under my nose. The container set was the root and was set to exclude groups. So that attribute was not available
in the location it was searching. As soon as I set to include groups I kicked off a discovery, re-ran the select for v_r_user and the column was there and starting to populate.

Orphan users and deleting logins but not users

Hello there,
First off I'm sorry if this was already posted. I've researched for the last two hours and can't seem to find the answer I'm looking for.
So its to my understanding then when you delete a Server Login, if you have a user that uses that Login and THAT LOGIN only, once you delete the login the user is now an orphan user.
I've been running the orphan user sp (
USE <database_name>;
GO;
sp_change_users_login @Action='Report';
GO;
but recently I've deleted a login, the user still exists on the database, but it should now be an orphan user right? I know for a fact this user is not in any other group, and it should be an orphan user. So why isn't it? :(

Hi Krystina,
Your question may be that sp_change_users_login didn't detect an orphan user scenario? If so, I would recommend checking sys.server_principals and sys.database_principals to verify for certain (and if you have a reproduction of the exact issue, please post
here).
Here is a demo that walks through the by-design behavior (dropping login will not equate to dropping a user, and that user will be an orphaned user).
USE [master]
GO
-- Create the login
CREATE LOGIN [TestUser] WITH PASSWORD=N'Test!!1234',
DEFAULT_DATABASE=[master], CHECK_EXPIRATION=OFF, CHECK_POLICY=OFF;
GO
-- Create a database
CREATE DATABASE [Test];
GO
-- Create the user in that database
USE [Test]
GO
CREATE USER [TestUser] FOR LOGIN [TestUser] WITH DEFAULT_SCHEMA=[dbo];
GO
-- Drop the * login * (not user)
DROP LOGIN [TestUser];
-- You should no longer see this long at the SQL Server instance (server) scope
SELECT [SP].[name], [SP].[principal_id], [SP].[sid], [SP].[type],
[SP].[type_desc], [SP].[is_disabled], [SP].[create_date],
[SP].[modify_date], [SP].[default_database_name],
[SP].[default_language_name], [SP].[credential_id]
FROM sys.[server_principals] AS [SP]
WHERE name = 'TestUser';
-- But we didn't drop the user, so you * should * still see it within the database (by-design)
USE [Test];
GO
SELECT [DP].[name], [DP].[principal_id], [DP].[type], [DP].[type_desc],
[DP].[default_schema_name], [DP].[create_date], [DP].[modify_date],
[DP].[owning_principal_id], [DP].[sid], [DP].[is_fixed_role]
FROM sys.[database_principals] AS [DP]
WHERE name = 'TestUser';
-- And your orphan proc call will report it as well
EXEC sp_change_users_login @Action='Report';
Best Regards, Joe Sack, MVP, SQL MCM | SackHQ.com

Windows 8 and User Rights - Access store but not install other programs

Hi, I wonder if someone can help,
I am trying to find out if it is possible through Active Directory to set up a group policy so that a user will be able to install apps from the windows store but be unable to install any other applications. I have seen that the store can be enabled or disabled
from windows server 2012, but have yet to find out if this is sufficient to allow store installs but no other external applications.
THanks

Hi Jon,
In addition to Martin’s reply, regarding Applocker, the following articles can be referred to for information.
AppLocker Step-by-Step Guide
http://technet.microsoft.com/en-us/library/dd723686(v=WS.10).aspx
Understanding AppLocker Rules
http://technet.microsoft.com/en-us/library/dd759068.aspx
Best regards,
Frank Shen

Why does Proxy Authentication prompt for user/pass on Win7 but not XP?

Trying to use NTLM authentication for our proxy through Firefox 7.0.1. It works great in Windows XP - the user doesn't ever get prompted for his username or password when going to the internet. However, when using the same settings with Windows 7 machines going to the same internet sites, they always get prompted for username and password. Is there a workaround for this? Is this a bug?

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I'm having timeline playback issues on one user on an iMac but not on another

Ok, I'm stumped. The iMacs we have here at the high school are set up through active directory and on the Admin account, premiere performs fantastic. On the student accounts however, it has this weird playback issue where it will play for about a second and then stop. You can keep pushing play but it keeps stopping. The app doesn't crash but playback is really bad.
I sure appreciate the help.
Thanks

[email protected] writes:
>http://forums.adobe.com/message/4785083#4785083
Thanks for the reply!
Are there any user settings in particular that I could enable?
The bummer is that the imac is running for a student account and admin is
pretty strict about enabling administrator prefs to students.
Thanks,
Nathan Ward
TV Productions
[email protected]

Beta user on one computer but not on another

I have Beta version 16.0 on one computer on one computer but on another computer its regular version 15.0.1. Bookmarks are not synching. How do i get both versions the same?

Do you have [[Firefox Sync - Take your bookmarks, tabs and personal information with you|Firefox Sync]] setup? If so and it is giving you problems, please check [[Firefox Sync troubleshooting and tips]].
Please tell us if this helped!

Hidden comments for users of Word 2013, but not earlier versions

I have a Word document that was probably originally created with Word 2000. We continuously work with this document and have made many changes over the last 15 years. We've made changes to the document using Word 2003, 2007, 2010 and 2013.
Now, when users of Word 2013 use the document, most of the comments do not appear in balloons. A few of the comments do appear in balloons. Users of earlier versions of Word see all of the comments in balloons. All users can see all comments in the
reviewing pane.
Show Markup is set for display of all information. I.e., there are checkmarks by "Comments", "Ink", "Insertions and Deletions", "Formatting", "Balloons/Show Revisions in Balloons", and "Specific People/All
Reviewers".
We had been saving the document as a Word 97-2003 Document. I converted it to a "Word Document" and the behavior is the same.
Thanks.

Try this in Word 2013: Copy the document content, minus the final paragraph mark, into a new file. Does that make a difference?
Stefan Blom, Microsoft Word MVP

Can video chat with Aim users on a PC but not with Ichat users on Mac!

Hello
I am having the odd problem of being able to video chat with someone when they are using their pc running aim, but I cant chat with the same person when he on his Mac!
I am running as DMZ behind a Linksys WRT54G wireless router.
The problem is on my side because I cant chat with the test accounts either.
I tried this after bothe forwarding and triggering all the ports that were suggested.
I am stumped!

Hi Lullah,
This is going to be down to the Staelite connection.
It has what is called latency.
This adds an unexceptable delay in the passing of data at the start of the connection.
Very few people have reported success.
The things you can try are to fool the link into passing more intense data prior to starting a chat.
If you have web pages try uploading a Pic of larger file to the site.
Just as this finishes start up iChat
You should also check that System Preferences > Quicktime > Streaming tab has the speed to match you download set.
Hopefully (But no reported success) you may get iChat to see more bandwidth as you have just had the modem busy.
Following the launch of iChat with a video chat request may be able to get that bandwidth.
Realistically the 128 k upload even if you were getting close to it is very tight to the lowest point Apple say will work.
Speed testing a 128 k service i likely to get a result of about 80% of the figure (102k) iChat will use about 80 % of what is left (you are down to about 83K). You are now below the 100k min.
With regards to your LAN there are several things that may help if not set up already.
Only have one device doing DHCP. The way routers work as compared to modems is that they pass all routing data though to the computers.
This means the computers can be sitting in two subnets (1) from Modem to computer via router and (2) from Router. The computer can only display one of these IP addresses but can get confuse info regarding iChat.
Do not use Port Forwarding or Port triggering, twice or together on the LAN. iCHAT does not like two lots of NAT (bath are forms of Network Address Translation [NAT]).
Use UPnP where you can.
IF you are trying to test this yur Mac to your PC you ahve to allow for the fact that the modem is handling two Video chats in effect. This means you need twice the minimum bandwidth (let alone the fact that ichat to AIM semms to like 50% more than Mac to Mac contacts.
Sorry to be the bearer of so much doom and gloom.
11:03 PM Tuesday; March 28, 2006

Trying to have users upload their images but not sure how

i went to the java forum they told me to download something
so i did but i didn't get more help after that soooo i'm here now.
http://forum.java.sun.com/thread.jspa?threadID=5157364&tstart=0
please help =)

i want it to work like:
http://www.shirtcity.com/shop/index.php?PHPSESSID=1c8bbf5bb832eb8df43d0000da2edc28
or this:
http://www.spreadshirt.com/shop.php?sid=1000&affiliate=600
where the user can see their image and decide where to place
the image
mind you this is just a mock up for a project, i dont need it
to actually work :p i just want someone to be able to upload some
random .jpg and see it on screen and be able to move it around.
that's all.
my website's gonna lets users choose their beanie then place
their design onto it. so i'd need them to be able to see the beanie
as well.

User in secutity filtering but not in OU?

Similar Messages

Maybe you are looking for