User input screen in the Bex report

Hi experts,
In the input screen of a BEx report, suppose for Business Area if we have 10 values in the infoprovider
then if user entered other than the 10 values then it should give me an error message saying that enter a
correct value.But right now it is not happening like that. How to get this ?
Regards,
Smitha.

Hi,
I kept some breakpoints and executed the query, but it is not going into debug mode.
In the code when clicked on Code Inspector the following errors came:
1.Program XRSR Include ZXRSRU01 Row 143 Column 0
Large table /BIC/AZSM_DSO00: No WHERE condition
2.Program XRSR Include LXRSRU05 Row 19 Column 0
Der Typ des VALUE-Parameters "E_THX_MAPPING" enthält eine
oder mehrere Tabellen, die als Zeilentyp wiederum interne
Tabellen enthalten (Siehe Test-Dokumentation).
3.Program XRSR Include LXRSRU05 Row 19 Column 0
oder mehrere Tabellen, die als Zeilentyp wiederum interne
Tabellen enthalten (Siehe Test-Dokumentation).
4.Program XRSR Include LXRSRU05 Row 19 Column 0
Der Typ des VALUE-Parameters "I_THX_SENDER" enthält eine
oder mehrere Tabellen, die als Zeilentyp wiederum interne
Tabellen enthalten (Siehe Test-Dokumentation).
5.Message Code 1002
Program XRSR Include LXRSRF00 Row 94 Column 0
The EXCEPTION "X_RAISE" is not defined in the interface of the function module
"RRMS_X_MESSAGE". "RRMS_X_MESSAGE".
Internal Message Code: MESSAGE G-7
==> The EXCEPTION "X_RAISE" is not defined in the interface
of the function module "RRMS_X_MESSAGE".
"RRMS_X_MESSAGE". Internal Message Code: MESSAGE G-7
6.Message Code 1700
Program XRSR Include ZXRSRU01 Row 157 Column 0
Char. strings w/o text elements will not be translated:
'Enter Correct value for FISCPER'
==> Char. strings w/o text elements will not be
translated: 'Enter Correct value for FISCPER'
Please help me in checking these errors.
Regards,
smitha.

Similar Messages

GR and IR as separate columns in the BEx report

Hi,
I am working on a Purchasing report in which the user needs the snap shot of PO history,Like PO no.,Item,Netprice,PO Qty,Net order value,GR no.,IR number etc.
I created a view on EKPO and EKBE.Here,based on the BELNR(Material document) field we are taking GR and IR values.(When VGABE =1 BELNR=GR and VGABE = 2 BELNR=IR).I created DSO to load the data.The problem is they need the GR and IR as separate columns in the BEx report.Could u please help me how to achieve this in BI?
Thanks & Regards,
Dinakar.

Hi Neel,
I need the BELNR has to be split into GR No.and IR No. separately based on VGABE field.
Thanks & Regards,
Dinakar.

Text elements in the Bex Report

Bex Gurus,
When we execute the Bex report, it will display with icons on top as Chart, Filter and Information - Information will display all the text elements as standard. Right now I want to modify these standard elements and disply the text elements which are more meaningful to any business user when they execute any report/query in Bex
Left Side:
Current User     II79747
InfoProvider     ZBYDCTBUD
Status of Data     04/18/2008 10:01:05
Query Technical Name     Y_ZBYDCTBUD_VP_POOL
Query Description     VP Matrix by Pool - Actual
Right Side: (based on Variable Enteries/selection)
Fiscal Year
Posting Period
Value Type
Version:
I want to implement this in Bex excel report when we click on Informaion icon which will show the text elements as explaiend above. (I know it is possible with WAD when we design the code)

You may do this in a workbook inserting Buttons in design mode.
I dont think so there is an easy way to accomplish this when a report is executed.
May be possible with lot of coding....

Short Dump when the Bex-Report scheduled for Broadcast

Hi Guru's
I am getting the short dump when I am scheduling the Bex-Report for Broadcasting. Need your help to reslove this issue.
Thanks
Navin
Note
The following error text was processed in the system BDV : The current application triggered a termination with a short dump.
The error occurred on the application server spdbwd01_BDV_05 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: INTERNAL_ERROR of program SAPLSDCL
Form: PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SDOK_PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SKWF_PHIO_CONTENT_ACCESS_GET of program SAPLSKWF_CONTENT
Method: COPY_MIME_TO_FOLDER of program CL_RSRA_KWF_UTILITIES=========CP
Method: GET_STYLESHEET of program CL_RSRA_KWF_TMPL==============CP
Method: CONSTRUCTOR of program CL_RSRA_KWF_TMPL==============CP
Method: SET_TEMPLATE_FOLDER of program CL_RSRA_ENGINE_BC=============CP
Method: CONSTRUCTOR of program CL_RSRA_ENGINE_BC=============CP
Method: EXECUTE_SINGLE of program CL_RSRA_JOB===================CP

HI Navin,
Check the short dump analysis in T-code ST22.
and also check the Information Broadcast Settings / Configuration
Check the error for Emails in t-code SCOT. BASIS Consultants will help you on this issue.
Regards
Daya Sagar

Hiding characteristics in the BEx reporting

My query is Hiding characteristics in the BEx reporting.
I want to see only query title, variable and result.
I want Hide or delete characteristics ( which are free characteristics and rows in Design mode of query) at query level.
can I do this ?

Ok. I was thinking you were in 7.0.
anyway, in your query remove all the characteristics in your rows and the query will show only the result then. (no drill-down)
For technical name and variable info. in analyzer, go to Layout and choose Display text elements.

How to use a charctersic as a keyfigure in the BEx report

How to use a charctersic as a keyfigure in the BEx report?

Hi chandra:
Please take a look at the document below.
"How to... Calculate with Attributes"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/72f4a790-0201-0010-5b89-a42a32223ffc?quicklink=index&overridelayout=true
Regards,
Francisco Milán.

Syntax to get the login user who is generating the BIP report

Hi,
I need to display the user who is executing the BIP Report. I hav used the following syntax, but it displays blank.
<?xdofx:xdo_user_name?>
Can someone please provide the syntax?

Hi
To connect the project professional with Project server and publish the project plan on server user need to have Project manager permission on PWA.
How to connect :
Open Project Professional from All program --> File --> Managed
Accounts -->Add you PWA URL (till PWA) --> Select the option Choose an account --> Save then close
Now open MS Project professional again it will ask you to connect to computer or PWA select PWA then you can start the Work.
You need not to get worry about LOGIN and user name , MPP will take Windows login of the user from Computer/laptop whoever
will be log in to system.
http://www.epmcentral.com/msp2010/pjserveraccount.php link is having Step by step image which will help you
kirtesh

To enter planing data in the same input screen in the same time ?

Dear Consultants,
I have prepared a general input screen in BPS.
Is it possiple to enter planing data in the same input screen in the same time ?
Or does it lock the all infocube while someone entering plan data?
Regards
Mehmet

Hi Mehmet,
1.To control lock mechanism(Data Slicing) via auhorization is not possible, as it is different concept.
2. Yes,it is possible to enter plan data in the same time in to the same cube with the same data input screen, if the characterstic company is at header level, in the layout.
****Pls assign points if info is useful***
Reagrds
CSM Reddy

Reversi Sample - "The project requires user input. Reload the project for more information."

A week ago, I downloaded the sample code examples. Then I extracted the reverse sample code, loaded it and ran it. All was well.
I was just using it as a resource for example code, so no code changes. Now, when I open the project, I get nothing loaded.
Solution explorer displays Solution 'Reversi' (0 Projects). Below that
"The project requires user input. Reload the project for more information."
This message shows for all three sections Reversi, ReversiGameComponet, and ReversiComponentTests.
Ok, so I figure I must have accidently changed something. So, I re-extract. Same message.
The only thing I can think of is that in the options, I changed the startup location for my projects. I like to keep my code projects on the d: drive, so I changed that to D:\!!!W8. I've always done this so that when I create a new project,
it does it in my project directory by default. Didn't change anything else such as the templates dir.
I did set this back to the c:....projects, as where templates are, but that didn't help. So, I reset to my projects directory.
My project that I created loads ok.
Suggestions?

A week ago, I downloaded the sample code examples. Then I extracted the reverse sample code, loaded it and ran it. All was well.
I was just using it as a resource for example code, so no code changes. Now, when I open the project, I get nothing loaded.
Solution explorer displays Solution 'Reversi' (0 Projects). Below that
"The project requires user input. Reload the project for more information."
This message shows for all three sections Reversi, ReversiGameComponet, and ReversiComponentTests.
Ok, so I figure I must have accidently changed something. So, I re-extract. Same message.
The only thing I can think of is that in the options, I changed the startup location for my projects. I like to keep my code projects on the d: drive, so I changed that to D:\!!!W8. I've always done this so that when I create a new project,
it does it in my project directory by default. Didn't change anything else such as the templates dir.
I did set this back to the c:....projects, as where templates are, but that didn't help. So, I reset to my projects directory.
My project that I created loads ok.
Suggestions?
Hi there,
Can you provide the link for the sample code example so I can download and try on my machine?
Regards,

How to Call another screen using the ABAP Report which is displaying ALV ou

Hello All,
I am developing a ABAP report in which I want to transfer the stock from material to another material.
My Report will include 3 to screens.
The first sleection screen will display all the material with their stock value.
When we execute the report I will get the list of materials along with their current stock. On the top of the output screen I want the Execute button. Also , each line of the output should have checkbox or the ALV provides the functionality of editing one cell like that.....Once the user tick the checkbox or the cell....then I want to move to another screen where user can enter the Quantity and then user will tick ok and then I will call one function module so that the material documnet is posted and transfer of posting form material to material is done successfully.
Could anyone please help me out how to call another screen from the output screen where user can enter the Quantity amount....
I dont want to use the Dialog programming.....I want to create the simple ALV Abap report.
Regards,
Komal Bhutada.

Hi Raymond,
Thanks for the input...I will try this in my code .....
Can you please help me how to insert the checkbox in the ALV Output....so that I can select one of row and then press execute to process further?..
Thanks for the information.
Regards,
Komal.

Adding new customized column in the Bex Report

Hi Experts,
I have an existing column (say A ) in Bex and I want to add one more column (say B) based on the values that I have in column A.
For e.g.,
A          B
5          5   (=A1)
8          3   (=A2 - A1)
15        7   (=A3 - A2)
I am able to create a new column B and bring the values based on above formula to get the expected results. Though the results are correct and also I saved the report as workbook, when I try to refresh the query again and open the workbook, the new column 'B' is getting disappeared.
Could someone please help me on this?
Thanks in advance for your help.
Bregards,
Krish

Hi Pavel
I'm hitch-hiking on this thread.
Can you please explain what do you mean by "the grid becomes static" when you use "Convert to Formula"?
I'm studying Excel integration in the BEx Analyser and it seems to me that when you select Convert to Formula and save the query, then you load new records into the Cube, when you open the query again it's no longer refreshed (even if you select "Refresh Workbook on Open". Is it what you mean?
I'd appreciate more detailed explanation. I'd appreciate too this documentation about BExGetData.
Thanks
César Menezes

Calling the Selection screen in the Interactive report

Hello,
this is urgent requirement.
I need to call the selection in the interactive report.
my requirement is i have to display list of the table name which is stored in the table DD20T.
in basic list i have to display all the table name.
if i double click the table name that the key field of the particular table with select option should display in the secondary list.
so please help me.
Thanks and regards,
zubera

Hi,
Go for Drill down report.
call transaction SE16 or SE16N. pass the tables to the transaction.
exp code:
DATA : lv_field(10) TYPE c VALUE 'MARA'.
WRITE : lv_field.
AT LINE-SELECTION.
SET PARAMETER ID 'DTB' FIELD lv_field.
CALL TRANSACTION 'SE16' AND SKIP FIRST SCREEN.
please reward if help full..........
By
Gupta

Attaching custom defined document to the BEx-report

Hai
I created a query in the Bex-Query Designer and then publish in the web through portals without using WebTemplates.
Now my client wants to attach a custom defined document(which requirment gathering document) to this query . How can i attach this custom define document to the query .
When i publish the report in the web then i have following tabs.
DataAnalysis
Graphical Display
Information
Information Broadcasting .
when i go to 'information' there i have "Query Documentation" tab . When i press this tab how can i get the my custom defined document
pls let me know
kumar

Hi ,,
Do this way....
Go RSA1 --> Documents -> meta data
then select object type ELEM and select object name <the query u want>
and add a text there or u can download from the file.
In BEX in query property check mark the document display then it will show a link in report and when u click that it will show the details..
did u check this as sent in ur previous thread....
Thanks,
Debasish

Constant value in one field in the Bex Report

Hi,
I want to have a field where the value of it constant irrespective of corresponding fields values.
Please suggest and let me know how to do it.
Regards,
Prem

Hi,
If you have any logic in your mind to populate that extra char or key figure , then you can make use of virtual char & virtual keyfigure .
Or if you want to just pass any constant value, then in CKF make a formula variable with user entry . What ever user enters in the selection screen that will start appearing in the report output against all the rows.
Hope the above reply was helpful.
Kind Regards,
Ashutosh Singh
Edited by: Ashutosh Singh on May 12, 2011 8:55 AM

Problem with dynamic columns in the BEx report

Hi Gurus,
I am tryging to build some planning application using BI-IP and input ready queries.
I'm facing issues with making the columns in the query 'dynamic'. The example is given below: -
Lets say there are states and cities for which we have to plan sales volumes. Depending on the value I choose for 'State' it should create as many columns for 'Cities' as per the hierarchy of the cities.
Lets say if I choose Maharashtra then the report shud look like :-
State-> Maharashtra
Rows               Column1                      Column2                      Column3
GL Account      Mumbai/0quantity        Pune/0quantity            Aurangabad/ 0quantity
1000000            1000                               1500                              1200
State--> Karnatka
Rows                 Column1                  Column2
GL account        Bangalore                 Mangalore
1000000
Any idea how this can be achieved?
Best Regards,
SSC

Hi friend,
See the link below it is having the solution of hiding the columns in smart forms
Hide table columns in smart form?
Create a table to display your values with 12 col and hide the columns based on the idea provided in the link above.
I think this will solve your issue if you still have queries please revert back to me i will help you.
Thanks,
Sri Hari

User input screen in the Bex report

Similar Messages

Maybe you are looking for