User Interface Guidelines for CRM 2007 are now available

The CRM UI Concept Team has made the [UI Guidelines for CRM Web Client User Interface (CRM 2007 UI)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/302d8152-002b-2b10-34bd-9ff3c712dd4b] available to the BPX community:
This document provides an overview of the on-premise as well as the off-premise versions of the SAP CRM Web Client User Interface (UI). It contains the properties and principles of the SAP CRM Web Client UI that are already committed and available. For planned features, refer to the corresponding specification documents.
The information in the guidelines starts with general topics, followed by details. The sections are organized with high-level topics like Page Types and Navigation Schema first, followed by the consecutive sections describing which building blocks and elements of the UI populate the various pages. A section typically starts with one or more screenshots of a central UI element with a generic explanation. The subsequent sections explain the detailed aspects of each element.
We hope that you will find this information useful.
Enjoy the new CRM UI!
Feel free to provide your feedback.
Edited by: Florian Weigmann  on Jul 17, 2008 9:14 PM

Hi,
not sure why your download stops.. you can also try to download via this link: [http://www.sapdesignguild.org/resources/CRM-UI-Guidelines-Customers.pdf|http://www.sapdesignguild.org/resources/CRM-UI-Guidelines-Customers.pdf] (Document is 17,4MB of size)
Here the guidelines also have been posted together with an article about the CRM 2007 Web Client UI.
Hope this helps
Best regards
Ingo

Similar Messages

  • FAQ: User Interface Guidelines for CRM 2007 are now available

    The CRM UI Concept Team has made the UI Guidelines for CRM Web Client User Interface (CRM 2007 UI) available to the BPX community:
    This document provides an overview of the on-premise as well as the off-premise versions of the SAP CRM Web Client User Interface (UI). It contains the properties and principles of the SAP CRM Web Client UI that are already committed and available. For planned features, refer to the corresponding specification documents.
    The information in the guidelines starts with general topics, followed by details. The sections are organized with high-level topics like Page Types and Navigation Schema first, followed by the consecutive sections describing which building blocks and elements of the UI populate the various pages. A section typically starts with one or more screenshots of a central UI element with a generic explanation. The subsequent sections explain the detailed aspects of each element.
    We hope that you will find this information useful.
    Enjoy the new CRM UI! [UI Guidelines for CRM Web Client User Interface (CRM 2007 UI)_ |http://www.sapdesignguild.org/resources/CRM-UI-Guidelines-Customers.pdf]
    Edited by: Zhaojie Liu on Jun 10, 2009 10:08 AM

    Hi,
    not sure why your download stops.. you can also try to download via this link: [http://www.sapdesignguild.org/resources/CRM-UI-Guidelines-Customers.pdf|http://www.sapdesignguild.org/resources/CRM-UI-Guidelines-Customers.pdf] (Document is 17,4MB of size)
    Here the guidelines also have been posted together with an article about the CRM 2007 Web Client UI.
    Hope this helps
    Best regards
    Ingo

  • Disp+work.EXE stopped when installing NW07 for CRM 2007 on Maxdb Windows

    Hi,
    I am installing NW07 for CRM 2007 on Maxdb 7.7 and Windows 2004 64bit.
    The installer cannot start the dispatcher on step 32. The dispatcher starts with green and is running  a while but Dialog queue is standstill. After few secodes the dispatcher changes to yellow as become disp+work.EXE stopped.
    Any advice? I have checked the RAM and log sizes etc and they seem to be ok. Database is running ok.
    System cannot connect the database?
    Here is dev_w0 file contets:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      01
    sid        XCR
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    144
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        2260
    Sun Nov 16 16:56:01 2008
    kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 2260) [dpxxdisp.c   1243]
         shared lib "dw_xml.dll" version 144 successfully loaded
         shared lib "dw_xtc.dll" version 144 successfully loaded
         shared lib "dw_stl.dll" version 144 successfully loaded
         shared lib "dw_gui.dll" version 144 successfully loaded
         shared lib "dw_mdm.dll" version 144 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3901
    Sun Nov 16 16:56:06 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5371]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >ESITV016LAB_XCR_01                      <
    DpShMCreate: sizeof(wp_adm)          25168     (1480)
    DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm)          552080     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1864)
    DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000EE70050, size: 6348592)
    DpShMCreate: allocated sys_adm at 000000000EE70050
    DpShMCreate: allocated wp_adm at 000000000EE72150
    DpShMCreate: allocated tm_adm_list at 000000000EE783A0
    DpShMCreate: allocated tm_adm at 000000000EE78400
    DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
    DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
    DpShMCreate: allocated comm_adm at 000000000F3E3FA0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
    DpShMCreate: allocated gw_adm at 000000000F46ACB0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000F46ACE0
    DpShMCreate: allocated wall_adm at 000000000F46ACF0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 127 blocks reserved for free list.
    ES initialized.
    Sun Nov 16 16:56:07 2008
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1633]
    ***LOG Q0K=> DpMsAttach, mscon ( ESITV016LAB) [dpxxdisp.c   11822]
    DpStartStopMsg: send start message (myname is >ESITV016LAB_XCR_01                      <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 144
    Release check o.K.
    Sun Nov 16 16:56:47 2008
    ERROR => DpHdlDeadWp: W0 (pid 1608) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W1 (pid 3940) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W2 (pid 636) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W3 (pid 3484) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W4 (pid 3504) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W5 (pid 1108) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W6 (pid 3512) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W7 (pid 3592) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W8 (pid 3616) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W9 (pid 3608) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => DpHdlDeadWp: W10 (pid 3368) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => DpHdlDeadWp: W11 (pid 1388) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => DpHdlDeadWp: W12 (pid 3276) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W13 (pid 1256) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W14 (pid 3400) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => DpHdlDeadWp: W15 (pid 2376) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => DpHdlDeadWp: W16 (pid 3032) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:56:57 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Sun Nov 16 14:56:57 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA     1608 Ended         no      1   0        0                                                                         
    1 DIA     3940 Ended         no      1   0        0                                                                         
    2 DIA      636 Ended         no      1   0        0                                                                         
    3 DIA     3484 Ended         no      1   0        0                                                                         
    4 DIA     3504 Ended         no      1   0        0                                                                         
    5 DIA     1108 Ended         no      1   0        0                                                                         
    6 DIA     3512 Ended         no      1   0        0                                                                         
    7 DIA     3592 Ended         no      1   0        0                                                                         
    8 DIA     3616 Ended         no      1   0        0                                                                         
    9 DIA     3608 Ended         no      1   0        0                                                                         
    10 UPD     3368 Ended         no      1   0        0                                                                         
    11 ENQ     1388 Ended         no      1   0        0                                                                         
    12 BTC     3276 Ended         no      1   0        0                                                                         
    13 BTC     1256 Ended         no      1   0        0                                                                         
    14 BTC     3400 Ended         no      1   0        0                                                                         
    15 SPO     2376 Ended         no      1   0        0                                                                         
    16 UP2     3032 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Sun Nov 16 14:56:57 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    6
    6
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    Dump of tm_adm structure:               Sun Nov 16 14:56:57 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Sun Nov 16 14:56:57 2008
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:02 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >ESITV016LAB_XCR_01                      < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (4076) (SOFT_KILL)
    Stop icman
    killing process (3800) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:4076  HANDLE:388)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:03 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:4076  HANDLE:388)
    wait for end of icman
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:04 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:05 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:06 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:07 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:08 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:09 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:10 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:11 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:12 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:13 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:14 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:3800  HANDLE:396)
    DpStartStopMsg: send stop message (myname is >ESITV016LAB_XCR_01                      <)
    NiIMyHostName: hostname = 'ESITV016LAB'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 2 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 2 (r)
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Sun Nov 16 16:57:15 2008
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12168]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 312 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 312 (pos=2)
    SiSelNRemove: removed sock 312
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 312
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 2260) [dpxxdisp.c   10421]
    Good Bye .....
    BR,
    Kari

    Hi,
    here is the right log content:
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Mon Nov 17 10:24:39 2008
    B  create_con (con_name=R/3)
    B  *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
    [dbcon.c      4537]
    M sysno      01
    M sid        XCR
    M systemid   562 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    144
    M intno      20050900
    M make:      multithreaded, Unicode, 64 bit, optimized
    M pid        2184
    M
    M  kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2184) [dpxxdisp.c   1305]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M 
    M Mon Nov 17 10:24:40 2008
    M  DpShMCreate: sizeof(wp_adm)          25168     (1480)
    M  DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    M  DpShMCreate: sizeof(comm_adm)          552080     (1088)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (104)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1864)
    M  DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000010E70050, size: 6348592)
    M  DpShMCreate: allocated sys_adm at 0000000010E70050
    M  DpShMCreate: allocated wp_adm at 0000000010E72150
    M  DpShMCreate: allocated tm_adm_list at 0000000010E783A0
    M  DpShMCreate: allocated tm_adm at 0000000010E78400
    M  DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
    M  DpShMCreate: allocated appc_ca_adm at 00000000113E2060
    M  DpShMCreate: allocated comm_adm at 00000000113E3FA0
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 000000001146AC30
    M  DpShMCreate: allocated gw_adm at 000000001146ACB0
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 000000001146ACE0
    M  DpShMCreate: allocated wall_adm at 000000001146ACF0
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Mon Nov 17 10:24:41 2008
    M  ThInit: running on host ESITV016LAB
    M  calling db_connect ...
    B  create_con (con_name=R/3)
    B  *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
    [dbcon.c      4537]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c   1440]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10468]
    M 
    M  Info for wp 0
    M 
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server ESITV016LAB_XCR_01 on host ESITV016LAB (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Mon Nov 17 10:24:41 2008
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10688
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 2184) [dpnttool.c   327]
    BR,
    Kari

  • Authorization restriction for CRM 2007

    Dear Experts,
    We are in process of defining the authorization matrix for CRM 2007 for end users who will be using Web UI.
    Here my requirement is the service orders created by USER1 should not be displayed by USER2 and vice-versa when they do a search in both Web UI and GUI in Tx CRMD_ORDER for service orders.
    Please let me know how can I acheive this and what is the auth. object for the same.
    Thanks & Regards,
    Sharath

    Dear babu,
    If I understood your request, you want that, only one user will be able to access the document. If you want to do that, this is the answer:
    At tcode PFCG you shoud set:
    First you must set what type of document will be avaible to the user, in this case Z020.
    CRM_ORD_PR: PR_TYPE 'Z020',ACTVT '*'
    Next you must set which activities they will be able to do (notice, you must set the same field in the previsou object(
    CRM_ACT: ACTVT u2018*u2019
    And then you set which partner function or partner category are able to access the document, here is the main point !
    In this example I set that only users who has Partner Category (not partner function) Employee Responsible (std partner category 0008) are able to access the document
    CRM_ORD_OP: ACTVT '', PARTN_FCT '', PARTN_FCTT '0008'
    Here you can notice again field ACTVT, here you will set what user are able to do, "*" means everything, "1" = create, "2" = modify, etc. (I can see the list at PFCG, adding the auth. object to the PFCG profile).
    I notice only std partner function or partner category works with this object. I sent a message to sap support, and they confirm that, so if your user has Z partner funcition or category it is not possible to do that.
    Summary, your user must be present in the partner list of the document, and they must have a partner function or partner category std. It is possible to set together both values PARTN_FCT  and PARTN_FCTT, but I think it is not necessary.
    The easy way to do that is, user who will be able to access the document, must be the employee responsible.
    This help is very usefull
    http://help.sap.com/saphelp_crm60/helpdata/en/4a/b9f63a8ab2c745e10000000a114084/frameset.htm
    Regards,
    Lalas
    ps.: As you should know, only one partner function must have partner category Employee Responsible, in the partner det. procedure, otherwise, you will get error message in your application.

  • Where can we get the media for CRM 2007?

    We want to get the media for CRM 2007 to begin our upgrade. My understanding is that it is now in general release.
    Where can we get the media? There are no links in the marketplace.
    Thanks

    I believe this is released for United States and Germany only.  I know you can order the physical media by submitting an OSS message under component: XX-SER-SWFL-SHIP.  You can also talk to your SAP account executive about getting the software.
    Take care,
    Stephen

  • ACE for CRM 2007-AFO method not getting called!

    Hi Experts,
    I am trying to implement ACE for CRM 2007.The only issue/concern is the Actor From Object(AFO) method is not being called even once.
    I was assuming that every method is called at the time of right's activation.
    I placed breakpoints in all the 5 methods, but only method Actor from User(AFU) and Object by Filter(OBF) were being called.
    Can anybody suggest at what point the method-Get Actors From Objects is called?
    Thanks and Regards,
    Rohit

    Hi Rohit,
    the method Actors-For-Object isnt used any more by SAP. Always use method Actors-For-Objects.
    This method should be called, when objects pass the method "object_by_filter" (runtime --> check_object..., activation --> get_object..).
    Perhaps there are no objects passing your OBF-methods? Can you check the output of your method?
    Regards,
    Mario

  • User Interface Template for Interactive Report Region

    In 3.2, where do we set the user interface template for Interactive Reports region?
    No matter what out of the box theme I switch to, the Interactive Reports region shows the same. What and where do I change the template so that alternating rows use two different colors?

    There is no template for Interactive Reports like for a "normal" report. You need to modify the CSS and supply your own for this to happen.
    I believe most things are tagged with #apexir - firebug with Firebox is invaluable. This thread may help:
    Re: changing the look and feel of interactive report.

  • Error while building B2B for CRM 2007

    Hi All
    I am trying to make few changes in B2B application for CRM 2007.
    I have created projects for crmisawebb2bsap.com and  crmhomeshrextsap.com
    But whenever I try to build anyone of them.
    There is a error.
    Build log -
    Development Component Build (2009-07-28 12:14:18)
      Component name: crm/b2b_2
      Component vendor: sap.com
      SC compartment: sap.com_SAP-CRMAPP_1
        Source code location: http://xxx/sap.com_SAP-CRMAPP/dev/inactive/DCs/sap.com/crm/b2b_2/_comp/
      DC root folder: C:\Documents and Settings\.dtc\4\DCs\sap.com\crm\b2b_2\_comp\
      DC type: J2EE
      DC subtype: Enterprise Application
    DC Model check:
              [dcmake] All used DCs are available locally
              [dcmake] ERROR: Check for used DCs failed: Cannot build because used component is broken: sap.com/crm/isa/web/b2b( sap.com_SAP-SHRWEB_1)
              [dcmake] Build failed with errors.
    Please advice me how to proceed.
    Thanks
    Pratyush

    Did you find the issue? I'm trying to install binutils and the gcc toolchain on my laptop.  I was able to get it to work (randomly) on my desktop a year ago (http://nakedproof.blogspot.com/2012/09/ … linux.html), but the same steps aren't working anymore.

  • Adobe Reader for Android - Links are now invisible on Android Phone!

    After the latest update to Adobe Reader for Android - Links are now invisible on Android Phone!

    Hi,
    You are correct,with the latest update, we have modified the links appearance.
    This decision was based on a feedback from the users.
    We changed the appearance as users were reporting that the 'blue rectangles' that used to indicate links, were interfering with their document viewing experience.Also, since those rectangles are actually not how the author made the file, we wanted to make the file look exactly as the author had desired.
    Thanks,
    Adobe Reader Team

  • Business pacakge for CRM 2007

    Hi,
    we just installed CRM 2007 system. Is there any business pacakge available for CRM 2007 (as in case of CRM 2005). If so, Could you please let me know.
    Thanks
    Sri

    Hi Hari,
    We are planning to upgrade from CRM 5.0 to CRM 2007. Currently we are using CRM for Leads, Opportunity and Account & Contact Management with PCUI front end. We do have some customized iViews for Sales People and Customers. Could you please mail me the step-by-step procedure to upgrade CRM 5.0 to CRM 2007 to [email protected]
    Please its urgent. Thanks a million....
    Cheers,
    Amit

  • Latest MediaSource Plugins for various Creative MP3 Players are now available for downl

    Just went to the product support site. Guess what? The latest MediaSource plugins for the various Creative MP3 Players are now available for download. I am sure the latest plugins should have fixed several problems.
    Don't forget to download the latest Creative MediaSource v3.30.2 too. Install the latest Creative MediaSource first before you install the MediaSource Plugins of your respecti've MP3 Players.
    Note: According to the download site, the latest MediaSource plugins require you to have at least v3.20.57 of Creative MediaSource.

    Thanks micromouse
    ... but there's no new plugin for the original Jukebox
    I've always had trouble connecting to MediaSource with my JB and was hoping for a new plugin to sort all my problems.
    PB

  • Hardware Development Kits for Windows 10 Insider Preview are now available! (April 2015)

    Hardware Development Kits for Windows 10 Insider Preview are now available! (April 2015)
    Install the latest tools to build, test, and deploy drivers; test and measure your hardware running Windows; and customize, assess, and deploy Windows 10 on your hardware.
    Become a Windows Insider
    to get the latest Windows 10 Insider Preview.
    Then,
    get the tools:
    Visual Studio Community 2015 RC
    Windows SDK for Windows 10
    Windows Driver kit (WDK) 10
    Windows Hardware Lab Kit (HLK) RC for Windows 10
    Windows Assessment and Deployment kit (ADK) RC for Windows 10
    Known Issues
    We will update this thread with any known issues for this release.

    Hello ,
    May I know ,where is the HLK download link
    Is it likely HLKSetup.exe ??thanks
    Windows Hardware Lab Kit (HLK) Technical Preview

  • AME 7.1 Updates are now available

    The Adobe Media Encoder 7.1 manual updates are now available here:
    http://www.adobe.com/support/downloads/product.jsp?product=160&platform=Macintosh
    http://www.adobe.com/support/downloads/product.jsp?product=160&platform=Windows
    They should be showing up in the Adobe Updater in the next few hours. Enjoy!

    Sure it fixed some problems in iTunes, but now my finder is having problems starting at login.
    I logged in, ran the update and rebooted, nothing else changed during that session. The machine was just fine before that reboot. Now when I log in it takes 60-90 seconds for finder to launch.....
    Anyone at Apple ever heard of testing? Ever heard of the words "unit", "string" and "user"? You fix a problem, you test that the fix corrected that problem, then you test the application affected to make sure you did not break something else, then you test the OS to make sure your fix did not break something outside of the application.....
    Apple quality has really gone south lately, I guess they are beginning to fall into the MS trap of allowing marketing to drive development timelines.

  • Adobe Reader & Acrobat Pro Extended 9.2 are now available

    Hi all,
    Note that Adobe Reader & Acrobat Pro Extended 9.2 are now available
    http://www.adobe.com/support/downloads/new.jsp
    Or simply go to  Help / Check for updates in order to get the latest build available.
    The Adobe® Acrobat® 9.2 Pro Extended update addresses critical security vulnerabilities while providing more overall stability.
    APEX 9.2 also includes the support of Inventor® 2010 and several 3D bugs fixes.
    Hope it helps
    Best Regards
    William Gallego
    A3D QE Team

    RESOLVED!!!
    The private data of the DEVMODE data structure may be corrupted when you use raw mode to print a document in a 32-bit application on a computer that is running a 64-bit version of Windows
    http://support.microsoft.com/kb/930627
    After installing the above patch, it works like a charm.

  • Business Catalyst & PhoneGap Build Functionalitiy in Dreamweaver CC 2014 are now available as an Extension on AddOns Page

    Hi,
    Business Catalyst & PhoneGap Build functionality are now available as an Extension in the AddOns page. To have these functionality enabled please install the Extensions from https://creative.adobe.com/addons
    Following are the steps to do so :
    1. Install Latest Adobe Creative Cloud Application.
    2. Install Dreamweaver CC 2014 from Adobe Creative Cloud Application.
    3. Launch Dreamweaver CC 2014.
    4. Goto Windows>>Browse AddOns.
    5. Quit Dreamweaver.
    6. Now in the AddOns Page Search for Business Catalyst & PhoneGap Build.
    7. Click to install the Extension from the AddOns page.
    8. Wait for a notification in the Adobe Creative Cloud Application, refer to the attached snapshot.
    Thanks
    Mudit

    Maybe 4 or 5 years ago; but now the need to develop mobile ready sites or apps using HTML5, JavaScript and CSS has increased. PhoneGap is presently used more than before to the point that Adobe has recognize its popularity in many ways. Making it part of Dreamweaver is not in my opinion excess luggage. Developers have always the option to pick and choose what to use from Dreamweaver. Maybe a specific developer doesn't need the PHP features in Dreamweaver; that doesn't mean that feature has to be removed.
    Most of the things we do with Dreamweaver can be done without it. Dreamweaver is there to help us save time and be more productive. This is why I feel that helpful features shouldn't be removed; instead they should be improved and solutions implemented to issues that sometime seem impossible to address.

Maybe you are looking for