User Interface In Table Maintenance Generator

Hi Friends,
Anyone pls Help me in this Concept ..
What is the Purpose of User Interface In Table Maintenance Generator . When we will go for these User Interfaces and How to create these User interfaces.
Thanks ,
Laxmi

Hi Simta,
thank you for your reply.
pls can you say clearly in what purpose we are going to customize the Interface and how to write code and where we have to write the code for interface.
thanks,
laxmi

Similar Messages

Table Maintenance Generator - Lock of entries from different user

Hi there,
It looks like that there are a lot of threads about table maintenance generators, but none related with this one. The case is when I created a customer table Ztable and using table maintenace generator to get the Tcode Ztcode. My questions is how can 2 different user at the same time running this Ztocde without locking with each other?
Thanks in advance!
Weidong

Hi there,
From what I know it can be done through customer ABAP program transaction code but not from Table maintenance generator generated Tcode.
Any suggestion?
Weidong

Table maintenance Generator + Tcode for SM30

Hi,
I have created a table maintenance generator for a Z table. Then I created a transaction from SE93 for SM30 and passing table name as parameter.
My requirement is that the user should only be able to delete records from the Z table. It should not allow to insert or modify records.
When I execute the transaction created above it is allowing to insert, modify and delete records from Z table.
How to solve this issue? Please help.
Thanks in advance....
Regards,
Sriram

Hi Sriram,
I don't know why your language has changed to German. When I change status ZULG, the language remains English.
To see what happens I have created new maintenance screens and I went into the Modification --> User Interface.
On the next screen I pressed Copy User Interface and after that I got a warning about diferent languages. I just pressed enter. Now the popup screen gives me the possibility to change the interface. I went straight into change mode, without switching to individual interface. I changed status ZULG (everything is in German), activated the status and returned to SE55.
When I start SM30 , all texts are in German.
Because this is not what you and I want, I started again, I deleted my table maintance and created it again. Went into the modification of user interface again and again copied the user interface. Now I went into change mode and I looked at my user interface (in display mode) and all texts are in German. Went back to the strat screen of the menu painter, ACTIVATED THE USER INTERFACE and now, when I change the status ZULG, all texts are in English.
So, all you need to do is activate the user interface before you change it.
When you have a 2-screen table maintenance (an overview and a detail screen), you might want to change status ZUDG as well.
Kind regards, I hope you succeed this time around.
Tom.

Additional buttons in Table Maintenance generated program

Hello all,
I'm looking for a way to add additional buttons on the generated table maintenance program. Such a program is generated via Dictionary transaction SE11 and then the Menu choice Utillities --> Table Maintenance generator (or use transactiob SE54).
The program generated is based on the standard SAP function group SVIM (of which components are copied to the table maintenance program). In the function group SVIM the STATUS objects are located (but they are standard SAP). In order to modify them (add some additional buttons) i am seeking a method for this.
Thanks in advance,
Rob.

Hi Rob,
Use transaction SE54, enter the name of your table, choose radiobutton 'Generated Objects' and choose 'Create/Change'. In the next screen there is an option in the menu Environment -> Modification -> User Interface. Here you can choose to use an Individual Interface where you can add the buttons you need.
Regards,
John.

How to create table maintenance generator?

Dear Sir/Madam,
when i am creating table maintenance generator , it asks for function group
i give 0MB8 , it says u r going to change function group which does not belongs to u,
then i created a function group yfg9 and given , it then says yfg9 cannot be processed.
please telll me how to create the table maintenance generator for maintenance view yv_mmim_rep_cust.
Thanks in advance,
Dastagiri

Hi ,
Table Maintenance generator is used to maintain data in table , instead of giving access to se11 , we create a tcode for this table maintenance generator and we will give this tcode to end-user to maintain data
To generate table Maintenance generator :
click on UTILITIES in menu bar
-> table maintenance generator
-> enter Authorization Group as : &NC&
-> Enter Function Group : name of your table ( so it will create a function group , to check this function group go to tcode se80 : then select function and enter your Table name )
-> Then click on find screen numbers in Application tool bar.
-> Then click on create button in Application tool bar
if it is created successfully , then you will get a status message like table maintained generator is created successfully.

Purpose of table maintenance generator

wht is the purpose of table maintenance generator

Hi Pavan,
The purpose of table maintainence generator is to enable the table maintenance through SM30, and to implement and validation etc on table field inputs.
SE11->Utillities->table maintainence generator
You need to enter the values of following fields:
1. Table name
2. Authorization group , and authorization object (select the suitable one )
3. Function group and package
4. Maintainence type : single or double screen maintainence view depending on the option selected.
5. Maintain screen number : you may specify a value or let the system generate one for you.
The validation code for the table entry is written in the flow logic of this screen. Even some of the fields may be made display only , by adding suitable code in the logic or directly disabling the input in table control in the layout.
Table maintanance is for creating,adding datas to an existing table.
it is for adding muiltiple records at a time in the table
A table can be manipulated by a program or manually.
When creating table, you will find a check box 'Table maintenance allowed'. If we
check that option, we can manually enter entries using SE16 or table
maintenance generator screen.
SE16 is for data browser.
Go to SE11, give the table name and click on change. Then Go to utilities--> Table
maintenance generator.
In the table maintenance generator screen, we should give Authorization Group,
Function Group name (Function Group name can be same as table name),
Maintenance type can be one step or two step, usually we will create with one
step. we should give maintenance screen number. After clicking on create button,
a table maintenance generator will be created.
To check it go to SM30 . In SM30, we find display, Maintain options.
We can view the table contents by choosing Display and we can create table
entries by choosing Maintain.
In the production system, end-users will not be having access to transaction
codes like SE11 and SE16. Developers will not be having access to many
transaction codes including the above two.
To view the contents of the database table, we will use SE16n in Production
system. Please find out the difference between SE16 and SE16n.
All these authorizations will be maintained by BASIS team, by creating access
profiles.
So in order to edit or create the contents of a database table, we should go for
table maintenance generator. In real time, authorizations will be maintained in
production system. (even in development and Test systems to some extent).
There is an audit like Sarbanes-Oxley Act for American clients, where every thing
will be audited by government agency. To know more about SOX, use the links on
the right hand side of this page.
The second reason is, we can edit or create multiple entries at a time, using table
maintenance generator.
Apart from that we have options like 'Enter conditions' in table maintenance
screen SM30. Please try to find out the use of those, by creating an example.
Table Maintenance generator: Difference between one step and two steps.
While creating table maintenance generator, we find below options:
When we choose one step, we have to give the screen number in Overview Screen field.
When we choose two step, we have to give both overview screen number and single screen number.
You can give any number for screen. Dont give 1000 screen number. As this
number is reserved for selection screen.
When we choose two step, two screens will be created for table maintenance. For
single step only one screen will be created.
When we choose two step, table maintenance will work as follows
Go to SM30, give the table name for which you have created table maintenance-
Overview screen will be displayed. To create entries, when you click on new
entries. Another screen will be displayed, where you give input and save. You can
enter one record at a time.
Go to SM30; give table name for which you have created table maintenance-
Overview screen will be displayed; To create entries click on new entries, you can
enter the records on the same screen. You can enter multiple records at a time.
We use single step generally, as it is user friendly.
To completely understand the difference and above points please do exercise by
creating table maintenance generator in both ways (using single step and two
step).
Link: [http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm]
Link: [http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm]
Link: [/message/2831202#2831202 [original link is broken];
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.

Table Maintenance Generator : Editable Entry after validation fails

Hi,
I have created a Z table and a table maintenance generator to maintain the data.
I have to carry out certain validations when user enters data on Key and Non- key fields.
This is working fine, but the issue is with the key fields.
If validation fails, the table maintenance screen is displayed the date-field is grayed out (non-editable) as it is the key field of the table.
Now the user cannot change the data unlike the non-key fields were the user can modify the non-valid data and save again.
How can make the date field (Key Field) editable after entry in case the validation fail, so that the user can make the changes.
Please suggest the approach to handle the above scenario in events.
Thanks,
Keyur

Thanks Kiran for your inputs.
I have done the same thing what you have explained.
I have used a Form Routine as CIP_SAVE with Event Number as 01, since on event SAVE i need to validate whether dates are
overlapping the inputs dates or not.
Fields are :
Group ID (Key)
Start Date (Key)
End Date (Key)
Value (Non -Key)
Initial value in Table:
Group ID = 12345
Start Date = 01/01/2011
End Date = 01/31/2011
Value = 11.11
Now if i try to enter value:
Group ID = 12345
Start Date = 01/02/2011
End Date = 01/25/2011
Value = 99.99
& SAVE it... validation will fails because Start & End dates overlaps.
Hence, on Table Maintainance Screen all key fields will be in non-editable display mode, whereas non-key field will be in editable mode.
My requirement is that Start Date & End Date key fields must be Editable field.
Thanks.

Table maintenance generator is not saving entries.

Hi All,
I am facing problem in table maintenance generator.
I created a table maintenance for Z-Table.
In my table last 2 fields are a checkbox.
When we go to Sm30 and check/uncheck the boxes then save , message comes tht data saved , but when we come out and go back to maintenance generator , it's not saved.
while table maintenance in 2 step , then on detail screen it is working perfectly but on primary screen it's not.
when TM is single step , it's show entries saved but not saving in data.
I tried to delete and regenerate table maintenance but still not working .
Please guide me to ractify this.
Thanks in advance,
Ashish Gautam

Hello Friend,
Check with th etechnical settings of the ztable:
see if your buffereing is allowed, and log data chnages is checked.
If so :
Then select buffereing is not allowed and uncheck the Log Data Changes:
Also go to TMG:
Check if standard recording routine is selected, then select the no, or user recording routine.
After making these changes, delete the TMG and create a new one once again. You can check it will work fine now.
Thanks and regards,
Uttam Agrawal
[http://uttambpt.blogspot.com|http://uttambpt.blogspot.com]
Edited by: uttamagrawal on Jan 31, 2011 12:42 PM

Add field in table maintenance generator screen of maintenance view

Hi,
I am having a table with field user-id. I want to generate a maintenance view which will have corresponding user name as input disabled field. Since there are two tables USR21 and ADRP I need to access(not a direct check table) I will have to modify the code generated by the table maintenance generator.
Problem is that it is having one internal table EXTRACT at table control loop. That internal table cannot be accessed if you write a module inside the table control loop and try to catch. The error coming as EXTRACT is not object of structure and therefore no component. I tried to capture the value of the Loop but could not be successful. Any suggestion please.
Thanks,
Atanu

Hi,
sample:
      MODULE LISTE_UPDATE_LISTE.
    ENDCHAIN.
*--->begin of your change
    CHAIN.
      FIELD YTAB1-BILKS .
      FIELD YTAB1-BILKH .
       module check_bewar ON CHAIN-input. "your checks
    ENDCHAIN.
*-----> end of your change
ENDLOOP.
MODULE LISTE_AFTER_LOOP.
-> module check_bewar is in an includ z123_INCL
Regards Andreas

Disabling fields in table Maintenance generator

Hi Experts,
I would like to restrict some fields in table maintenance generator dynamically/ statically.
Here is the situation.
I have generated table maintenance for the table ZMARA and I have created three transactions for the above single table maintenance generator.
i.e .. Transaction      ---        Table
          ZT1                  ---         ZMARA
          ZT2                  ---          ZMARA
          ZT3                  ---          ZMARA
I am using above three transactions in my module pool program. Based on the certain conditions I am calling different transactions i.e ZT1, ZT2, etc
Here is my requirement:
Suppose if I call ZT1 transaction, I need to display only few fields. i.e ZMATNR, ZMTART, ZPRODH.
or remaining fields should disable. User should not allow to change the content, even if it is new entries/existing entries. only ZMATNR, ZMTART, ZPRODH.
Suppose if I call ZT2 transaction, I need to display only few fields. i.e ZMATNR, ZMTART, ZHTSCODE
How can we restrict dynamically when you call table maintenance generator table through transaction
or
How can we generate table maintenance for few fields?
Edited by: r badveli on Mar 16, 2009 4:27 PM
Edited by: r badveli on Mar 16, 2009 4:27 PM
Edited by: r badveli on Mar 16, 2009 4:28 PM

Hi ,
go to Se11->Table maintenace generation. Double click on screen to edit and assign the field you want to display/hide to groups. In PBO , after the following lines..
LOOP AT EXTRACT WITH CONTROL
TCTRL_ZMARA                         CURSOR NEXTLINE.
   MODULE LISTE_SHOW_LISTE.
ENDLOOP.
Write a new module in PBO and edit the SCREEN as per the Tcode, you are calling,,'
Hope this helps you
Rj

Event code in table maintenance generator

Hi All, Need to call event in Table maintenance generator of the z table. I have to use 1st event (Select ’01’ – Before saving data in the database). Need to do fallowing job: Table cleaning : Delete all records with value year =< 2011 -New rule : No save can be done with value (Pst Var, PA,PSA, Cost = ‘ *,*,*,*’). I am attaching table entry with this mail, I have written the code for this but not sure please suggest me modification if required for this.Because i have never done this before. Thanks and Regards Sankil

hi Sankil
Some variable is not available in your code and you did not modify EXTRACT table.
Try to modify your code as blow:
This event has no standard routine. The following global data is available for the realization of the user routine:
•internal table TOTAL
•field symbols
•field symbols <ACTION> and <ACTION_TEXT>
•<STATUS>-UPD_FLAG
If internal table data are to be changed before saving, t he changes should be made in both the internal table
TOTAL and in the internal table EXTRACT.
FORM abc.
DATA: F_INDEX LIKE SY-TABIX. "Index to note the lines found
LOOP AT TOTAL.
IF <ACTION> = desired constant.
READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
IF SY-SUBRC EQ 0.
F_INDEX = SY-TABIX.
ELSE.
CLEAR F_INDX.
ENDIF.
(make desired changes to the line TOTAL)
MODIFY TOTAL.
CHECK F_INDX GT 0.
EXTRACT = TOTAL.
MODIFY EXTRACT INDEX F_INDX.
ENDIF.
ENDLOOP.
SY-SUBRC = 0.
ENDFORM
refer event 01: http://help.sap.com/saphelp_nw04/helpdata/en/91/ca9f0ea9d111d1a5690000e82deaaa/frameset.htm
regards,
Archer

Fields update on Table maintenance generator screen

HI All..
I have a custom table with five fields. I did table maintenance generator on it. It has Screen 1 as overview screen and scree 2 as single screen.
Now of the five fields two fields are user name and date. When i enter data on the other three fields and save it on the second screen - iam able to update the two fields for username and date and display on the screen two itself.
But if iam not saving the data on the screen 2 and going back to screen 1 and then save it - iam not able to update the user name and date and also to display the username and date on the screen.
Any suggestions are helpful..
Thanks and will reward helpful answers.

In this case..
Iam having the functionality of SM30 through table maintenance generator.
On Screen 2- single screen - user name and date is working as i had written the logic in the relevant PBO and PAI module.
But if user is not saving the data in screen screen2 and coming back to screen 1- which is overview screen and then try to save it-- all other fields are getting saved except the username and date..
Thanks.

Help required on table maintenance generator

Hi all,
Would any one tell me what is the difference between one step and two step while creating a table maintenace generator for a table.
one more question is i would like to know which search the following code follows while it is executed.
select single vbeln
from vbak into l_vbeln
where vbeln in s_vbeln.
and
select vbeln
from vbak
into l_vbeln
up to 1 rows
where vbeln in s_vbeln.
please do reply soon for the questions.

Hi
table maintanance Generator is used to manually
input values using transaction sm30
follow below steps
1) go to se11 check table maintanance check box under
attributes tab
2) utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
3)
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
4) select maintaience type as single step.
5) maintainence screen as system generated numbers
this dialog box appears when you click on create
button
6) save and activate table
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm
/message/2831202#2831202 [original link is broken]
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
Difference Between Select Single and Select UpTo One Rows
According to SAP Performance course the SELECT UP TO 1 ROWS is faster than SELECT SINGLE because you are not using all the primary key fields.
select single is a construct designed to read database records with primary key. In the absence of the primary key, it might end up doing a sequential search, whereas the select up to 1 rows may assume that there is no primary key supplied and will try to find most suitable index.
The best way to find out is through sql trace or runtime analysis.
Use "select up to 1 rows" only if you are sure that all the records returned will have the same value for the field(s) you are interested in. If not, you will be reading only the first record which matches the criteria, but may be the second or the third record has the value you are looking for.
The System test result showed that the variant Single * takes less time than Up to 1 rows as there is an additional level for COUNT STOP KEY for SELECT ENDSELECT UP TO 1 ROWS.
The 'SELECT SINGLE' statement selects the first row in the database that it finds that fulfils the 'WHERE' clause If this results in multiple records then only the first one will be returned and therefore may not be unique.
Mainly: to read data from
The 'SELECT .... UP TO 1 ROWS' statement is subtly different. The database selects all of the relevant records that are defined by the WHERE clause, applies any aggregate, ordering or grouping functions to them and then returns the first record of the result set.
Mainly: to check if entries exist.
Reward points for useful Answers
Regards
Anji

Event for input validation in custom table (table maintenance generator)

Hello all,
I look for a solution to execute an event after the modification of a table field of a custom table to validate the user's input.
I already tried event 07 (Execution : Before correcting the contents of a selected field) of the table maintenance generator but it will be executed after some modification made by the Edit -> Change field action.
I could use the event 01 but in my opinion this event happens to late and errors are very uncomfortable for the user at that time.
Editing the dynpro events is not a solution for me because it should be easy to maintain the table structure at any time.
Thank you in advance
Robert

Thank you!
Event 08 just starts after the saving process after Event 07.
Event 18 gets executed when I click on the save button.
I want to check the data after the enter button was pressed as you can see it in several transactions.

Table maintenance generator

Hi All,
I have created a table maintenance generator and maintained data in that.
After that I added one more field in that table, but when I goto SM30 to add entries I cannot find that field.
Please suggest,
Thanks ,
Salman Zahir

Hi,
Whenever you do any changes in a database table, and then activate it, you need to create a new maintenance genrator for your table, else no changes would be reflect in SM30.
As you have added a new field in your ztable, activate it, and delete the old maintenance generator and create a new maintenance generator in the similar way as created initially.
Now execute SM30 and all the modification would be displayed to the user.
Hope this helps you.
Regards,
Tarun

User Interface In Table Maintenance Generator

Similar Messages

Maybe you are looking for