User Interface option not shown

Just installed Adobe Creative Cloud ->Flash Professional CS6 --My question is, I'm trying to change the user interface to dark grey. the program installed in white. When I go to Edit->Preferences->General there is no "user interface" option. Anyone know how to fix this?

Hi,
You can install any CC application if you have a valid creative cloud subscription. Please try the following
1. Install Adobe Creative Cloud desktop application from https://creative.adobe.com/products/creative-cloud
2. Login with your Creative Cloud credentials
3. Click on the Apps section where you will see the list of cc products for installation under FIND NEW APPS category
4. You should find Flash Professional CC and Mobile Device Packaging for installation
Thanks!
Mohan

Similar Messages

ABAP WebDynPro User Interface Elements not shown on layout while designing

Hi,
When I create a new custom ABAP WedDynpro, the UI Element library is not shown on the view layout.
I have tried a lot of options in exploring this.
Kindly help me
Thanks
Sai.

Have you followed the instructions in the online help:
For the layout editor in the View Designer, all the services specified in Active Services in SICF for Web Dynpro ABAP must be activated. More information: SAP Notes 1009930 and 1008689
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/d28dfa34bb12bee10000000a1553f7/frameset.htm
The view designer is a web application itself and your system must be properly setup for web access for this to work. Also look at your Fully Qualified Domain Name setup:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm
Although a nice feature, the view deisgner is not required for building Web Dynpro Applications. You can do 100% of the activities with the view designer turned off by working with the UI element tree on the right side of the page. You can right mouse click and use the context menu to access most functions. I'm sure that you want to get the view designer working, but until then you can still function.

This advertised application will not be installed because it might be unsafe. Contact your administrator to change the installation user interface option of the package to basic.

Hi there,
I was wondering whether anyone could tell me which feature in Windows 7 produces this message "This advertised application will not be installed because it might be unsafe. Contact your administrator to change the installation user interface option of
the package to basic." and whether it can be turned off in Windows to prevent this message from appearing when installing certain programs that aren't WHQL certified. At first I thought it was the UAC control that generated this message but found out
that it wasn't and then thought it was the DEP control and found out that it wasn't this either. I'm only seem to be getting this message when installing FileDirector Component Service Version 3 on a few of our workstations which is an add-on that allows file
integration with Office and is part of FileDirector WinClient Version 3.
Your help would be much appreciated.
Many thanks,
RocknRollTim
P.S. I know of a way to bypass this message but would ideally not like to have the feature turned on and for the message not to be appear for non WHQL certified program installations in order to make non WHQL certified program installations in the future much
easier, more simpler and straightforward to carry out. I was redirected by a moderator off the Microsoft Community Forum.

Hi,
You can try following options to disable this prompt, but we don't recommend you to do so since this feature helps you to protect your computer.
Option 1: Run command as admin:
bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
Restart your computer to apply changes.
Option 2: Disable in GPO:
1.Type gpedit.msc in the Run dialog and press Enter.
2.In the Group Policy Editor, navigate to User Configuration → Administrative Templates → System → Driver Installation.
3.Double-click on Code signing for device drivers in the right-side pane as shown above.
4.In the windows that opens, choose Enabled. In the Options, choose Ignore as shown. Then click on the OK button to save the settings.
Restart your computer to apply changes.
Kate Li
TechNet Community Support
Unmarked as Answer based on OP's request.
https://social.technet.microsoft.com/Forums/en-US/35ab1279-c3a1-46be-9f7d-45e8606c1410/this-advertised-application-will-not-be-installed-because-it-might-be-unsafe-contact-your?forum=w7itproappcompat
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Coldfusion dev installer wont work - "installer user interface mode not supported..."

i just downloaded the os x version of coldfusion 7 mx
developer edition (for the thrid time making sure the download
wasn't corrupt) and extracted the zip and launched the installer by
double-clicking it. the install screen pops up where it lets you
choose what language and i press ok. almost instantly i get an
error message to pop up that says... "Installer user interface mode
not supported. Unable to load and to prepare the installer in GUI
mode."
umm... what?!
does anyone have any idea what's going on and why the
installer is misbehaving?! thanks!
: : michael

and the answer for others stuck on this...
the problems is an installanywhere bug where if the anything
in the directory path contains special characters like "!" or "#" ,
it causes problems with the install. in my case, the directory path
had a "!" in it... hope this helps someone else out!
: : michael

Hdmi option not shown in preferences

hdmi option not shown in preferences

What are you expecting?
Do you have anything connected to the HDMI port?

Identity managent user interface is not available

when i try to acces user administration i get following error.
A required service for the identity management user interface is not available. Contact your system administrator.

See OSS note 869852 - Central Note For UME Web Dynpro UIs (user Admin in Portal). Topic #5 Troubleshooting discusses some possible solutions. We have found that sometimes, a complete shutdown and restart of the server works. Also, our Basis guys stopped and then restarted application com.sap.security.core.admin in the visual administrator and then the User Admin functionality was available for awhile until the portal was stopped/started for backup. Our Basis group is going to look into this further and I will post any additional info that we find. Would appreciate it if you would do the same.

User pictures are not shown when users are added to person field in custom list

Hi,
Recently we have migrated our intranet from SP2010 to SP2013. We upgraded User profile service application, My sites and Intranet site to new environment. We haven't upgraded sites to use SP 2013 templates due to some business decisions. Everything
is working fine and as expected.
There are few lists in our environment where we have added users in a persons fields and allowed to show their pictures with details along with name. these user pictures are not being shown on to the page. After looking in picture property I found that "white
Space" in a picture library name is replace by %2520 instead of %20 (/user%2520photos/profile%2520pictures).
I tried reproducing problem on a new team site with SP 2010 template and it is reproduced however it is not occurring for a team site with SP 2013 template.
Any suggestions would be very helpful for resolving this issue. Thanks in advance.
-Amol Meshe

We are experiencing the same issue. We get a /User%2520Photos/Profile%2520Pictures/ path anytime we use the people picker field with the option to display picture or the picture and details option.
EDIT: This is only a problem on the list view. If you open the display form the image shows just fine. I can't see any setting view Edit Page and updating the web part that contains the list data to correct this.
Michael Allen (.NET and SharePoint 2010 Developer)

User decision option not seen to approver

We have a user decision in our workflow template. We have decision option Select approver ,Sent back to AP ,Cancel . When some users execute the this task they were shown as decision decision and cancel. decision option text is not shown to them. This is happenng for few users only. not for all users. Please suggest what can be done to solve this issue

Yaa Martin is right please check the Translations has been maintained for the Logon language in which the user is logging in. You can check the table entries of SWDSTEXT.
Thanks
Arghadip

Shared Component User Interface Templates not available for page use.

Hello.
I created a new User Interface Template using the wizard under shared components. All it's supposed to do is display a header image on the page. I can click on the title under User Interface Templates and it will display fine. If I try to use that template, it will not display as an option under Display Option use custom template LOV under the Main tab of page modifications. Shouldn't it be available here for selection? I couldn't find any access grant options under Shared Components that might have explained this problem.
Thanks.
Kurt

Does anyone else have this problem? How did you fix it?

Just started using firefox seriously. my user interface does not look like the one in the 'tour'. please help

i downloaded firefox a long time ago but havent used it extensively because i liked chrome. but recently chrome is just too difficult and if there is an issue i cant speak to anyone. so i am trying firefox. i went to take the user interface tour and there is suppose to be a button on the right hand side to help with bookmarks but my 'version' doesnt have that. was wondering how i get that and if i may have the wrong version.
also....i cant seem to find where to turn autofill on and right now its not working except with the occasional email address.
and one more thing....all streaming videos...tv, utube, art instruction..trailers...all get chunked up. nothing ever runs smoothly. and i am paying to get good download speed.
i would appreciate any help on these three issues.
thank you

About the bookmark button:
*[https://support.mozilla.org/en-US/kb/customize-firefox-controls-buttons-and-toolbars Customize toolbars]
About versions of Firefox:
*[http://www.mozilla.org/en-US/firefox/new/ Last Firefox Version]
About the videos:
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Setting persistent interface options not availible in preferences.

Hello,
I'm looking for the proper place (file(s) to edit) to add customized network interface options which will be applied at boot up and anytime there are network location (kicker) change.
I need to assign en0 a non default metric upon system boot and any time the interface may be reset. I can do this with "ifconfig en0 metric 100" but am looking for where I can automate this without requiring the client to type it in each time it is required.
All machines are 10.5.x or 10.6.x.
Thanks for your help,
greg

Insofar as system boot is concerned, you could create a launchd.plist file to do this and put it in /Library/LaunchDaemons/. Here is a draft plist that might do this -- in other words, I copied one of mine and made a couple of quick text edits so this may or may not work. But it should get you going down the right path.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN"
"http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>metric</string>
<key>Disabled</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/sbin/ifconfig</string>
<string>en0</string>
<string>metric</string>
<string>100</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
You may be able to use something like the "watchpaths" key if something in a file or directory someplace changes when the interface may be reset. That would add another key like
<key>WatchPaths</key>
<array>
<string>/path/to/file/or/directory/to/watch</string>
</array>
Do a man launchd and man launchd.plist to read more about how to create launchd jobs. Also, look at how Apple has done some of theirs: /System/Library/LaunchDaemons/com.apple.periodic-daily.plist, for example.

Interface mapping not shown in directory search help

Hi,
I creatd a interface mapping in repository with message mapping. but when i configure the directory for receiver determination .. the interface mapping is not shown when i click the search help.
pls any one help me .
thankx,
shree

Hi Shree,
Three checkpoints:
1. Make sure you have entered the correct outbound and inbound interfaces.
2. Make sure you have activated your interfaces and mappings.
3. Make sure the cache is up-to-date (you can refresh cache by transaction sxi_cache).
Hope this helps.
Regards,
Hart

User Interface Template not displaying correctly

On some machines the user interface template is not displaying correctly (x is appearing instead of the images that make up the UI template). It does not seem to be a permissions related issue, as the same user can view the UI template on a different machine. It also doesn't seem to be a browser definitions issue as a different user on the same machine can view the UI template. Which leaves me at a loss for ideas...

Where are your images being used in the UI template stored? I like to place my images in directory:
<portalMidTier>/apache/apache/htdocs/img
Then from within the UI template I can relatively reference the images as /img/logo.gif
Regards,
Candace

InDesign CC User Interface Preferences not sticking

You're not my father, you killed my father! I'll never join you!
Help I don't want to join the DARK side. InDesign won't remember my user interface preferences. I switch to light, close the app, and it goes back to dark (medium dark) next time I open. I am on Windows 7.
Anyone else notice this (mis)behavior or have a solution?
Ben Dupre

Bob, thanks.
I didn't install any updates today. Would that happen without consent?
I did notice my recent file menu is also gone though. Is there a config file I can save that can be reapplied after an update?
Ben

"With Xib for user interface" option Disabled

I was able to use the "With Xib for user interface" a couple of days ago but now when I try to create new object-c file with xib interface, I cant use the checkbox. It is disabled. What may be the problem? How can I create a file with xib again?

Does the following Stack Overflow question help you?
How to create new View Controllers in XCode 4.3
If not, you're going to have provide more information for anyone to help you. What version of Xcode are you using? What type of Objective-C file are you creating? What type of project are you adding the file to?

User Interface option not shown

Similar Messages

Maybe you are looking for