USER IS GETTING ERROR MESSAGE WHILE DOING PM ORDER COLLECTIVE CONFIRMATION

Dear,
i have query from my client that user is getting error message " no status object is available for cre o/o/o while doing pm order confirmation. My client is using sap MRS . I Recommend the client to run program ZKBEDREP in se38 and still they are facing the same error.Can any body help me in solving this.

Hi,
Please see if this thread helps
System status not avilable for one of the component - Conf. can't be done
Regards,

Similar Messages

Error Message while doing Order CLSD

Hi,
I am getting error message while doing Order CLSD...
Error Msg: Invalid cost element(XXXX) for reservation item 010.
please suggest me...how to solve this issue.
regards,
Venkatesan Anandan

Hi Venkatesan,
I had replied and asked for one clarrification and to check same at your end.
Is your Cost Element mapping done with cost cost center used in order settlement rule.
Also check for Material Master Change document for Valuation Class change and revert back in this thread.

Error message while doing MIGO.

Hi,
I am getting error message while doing MIGO. Can some one help me out in this issue.
Consolidated companies 0 and 5686 are different
Message no. F5 080
Diagnosis
The number of the affiliated company must be clear for the selected document type for all line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
Procedure
If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account.
Thanks in Advance,
Subhajo

Check Fi customizing in OBA7.
As you mentioned MIGO, I assume you are doing goods receipt, so you use document type WE.
Within WE you must not have selected the field inter-company posting .
Best you place the cursor into this field and press F1 for detailed explanation,

Error message while viewing Purchase order summary

Hi all,
we are in 11.5.10.2 , we are getting error message while viewing purchase order "Currency formatting cannot be performed without a currency code".
is it beacuse of currency not popluated in Purchase order?
Verified metalink note - 960504.1
Thanks
Kiran

Hi Kiran,
Verified metalink and other areas but could not get any appropriate solution.
I tried to reproduce the issue in various available environments...but no luck!
My guess would be the datafix/BUG that you have referred in the MOS note 960504.1
Please check with your DBA for this patch in test instance.
Thanks
-Arif.

I am getting error message while attempting to upgrade the software to iOS 6.1.3

Hi,
Need help on this, i am getting error message while attempting to upgrade the software to iOS 6.1.3

The Current iOS for the iPhone 4s is iOS 7
How to update your iPhone, iPad, or iPod touch

Getting error message while defining Profit Center

Dear Expert,
Kindly suggest while adding profit center in profit center setup on profit center field earlier it allowed to save the profit center name in alpha numeric but recently we are getting error message while updating or adding on new profit center"Conversion failed when converting the nvarchar value "Profit Center Name" to data type int (CINF)".
If anybody had a solution or came across this kind of situation then please forward us your valuable information that would be really great to tackle and out come from this issue.
Thanks in Advance
Regards
Krishna

Dear Krishna,
What is your B1 version and PL? Is it upgraded from an old one?
Thanks,
Gordon

Getting error message while opening PDF file.

Hello Experts....
I'm getting error message while opening the attached PDF file in mail.
I'm Sending the payslip to mail which is converted into .PDF format.
Where exactly the problem i m not getting.
Please help....

CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
      EXPORTING
        src_spoolid                    = rqident
        no_dialog                      = ' '
       DST_DEVICE                     = out_parms-pdest
      PDF_DESTINATION                =
       get_size_from_format           = out_parms-pdest
      IMPORTING
        pdf_bytecount                  = bytecount
       pdf_spoolid                    = pdfspoolid
      LIST_PAGECOUNT                 =
       btc_jobname                    = jobname
       btc_jobcount                   = jobcount
      TABLES
        pdf                            = out_tab
      EXCEPTIONS
        err_no_abap_spooljob           = 1
        err_no_spooljob                = 2
        err_no_permission              = 3
        err_conv_not_possible          = 4
        err_bad_destdevice             = 5
        user_cancelled                 = 6
        err_spoolerror                 = 7
        err_temseerror                 = 8
        err_btcjob_open_failed         = 9
        err_btcjob_submit_failed       = 10
        err_btcjob_close_failed        = 11.
IF sy-subrc NE 0.
ENDIF.
*CALL FUNCTION 'BAPI_GET_PAYSLIP_PDF'
EXPORTING
   employeenumber       = PERNR-PERNR
   sequencenumber       = '00001'
   payslipvariant       = 'PAYSLIP-PM'
IMPORTING
RETURN               =
PAYSLIP              = PAYSLIP
PDF_FSIZE            =
******************CONVERTING PAYSLIP(XSTRING) TO BINARY FORMAT******
call function 'SCMS_XSTRING_TO_BINARY'
   exporting
     buffer                = payslip
APPEND_TO_TABLE       = ' '
IMPORTING
OUTPUT_LENGTH         =
   tables
     binary_tab            = OUT_TAB.
    check not ( out_tab[] is initial ).
    refresh i_record.
    clear : i_record.
    call function 'QCE1_CONVERT'
      tables
        t_source_tab         = out_tab
        t_target_tab         = i_record
      exceptions
        convert_not_possible = 1
        others               = 2.
    if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
   do.
     i_record = it_attachment_long.
     append i_record.
     shift it_attachment_long left by 255 places.
     if it_attachment_long is initial.
       exit.
     endif.
   enddo.
    select single ltx into subject from t247
               where mnr eq pn-begda+4(2)
                 and spras eq 'EN'.
    condense subject.
    concatenate 'Payslip for the month of' subject pn-begda+0(4)
                              into subject separated by space.
    describe table lt_objbin lines l_att_lines.
    read table lt_objbin index l_att_lines.
    lv_document_data-doc_size = tab_lines * 255 .
    lv_document_data-obj_name = 'Payslip'.
    lv_document_data-obj_descr = subject.
e-mail body
    clear lt_objpack-transf_bin.
    lt_objpack-head_start = 1.
    lt_objpack-head_num = 0.
    lt_objpack-body_start = 1.
    lt_objpack-body_num = tab_lines.
    lt_objpack-doc_type = 'RAW'.
LT_OBJPACK-doc_size = STRLEN( LT_OBJTXT ).
    append lt_objpack.
For e-mail attachment
    lt_objhead = 'payslip.pdf'.
    append lt_objhead.
    lt_objbin[] = out_tab[]."i_record[].
    "describe table i_record lines l_att_lines.
    describe table out_tab lines l_att_lines.
CLEAR LT_OBJPACK.
    lt_objpack-transf_bin = 'X'.
    lt_objpack-head_start = 1.
    lt_objpack-head_num = 0.
    lt_objpack-body_start = 1.
    lt_objpack-body_num = l_att_lines.
    lt_objpack-doc_type = 'PDF'.
    lt_objpack-obj_name = 'attachment'.
    lt_objpack-obj_descr = 'payslip'.
    lt_objpack-doc_size = ( l_att_lines - 1 ) * 255 + strlen( lt_objbin ).
    append lt_objpack.
make recipient list
   " check user_mail_id is not initial.
    lt_reclist-receiver = user_mail_id.
    lt_reclist-rec_type = 'U'.
    append lt_reclist.
    call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      exporting
        document_data              = lv_document_data
        put_in_outbox              = 'X'
        commit_work                = 'X'
      tables
        packing_list               = lt_objpack
        object_header              = lt_objhead
        contents_bin               = lt_objbin
      contents_txt               = lt_objtxt
        receivers                  = lt_reclist
      exceptions
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        others                     = 8.
    if sy-subrc = 0.
      write:/ 'Mail sent to', 30 user_mail_id.
      write : sy-uline.
    else.
      write:/ 'Error encountered'.
    endif.
    clear : lt_objpack, lt_objhead, lt_objbin, lt_reclist.
    refresh : lt_objpack, lt_objhead, lt_objbin, lt_reclist.
   clear : filepath+3(17), pdffile, encryptpdf, batch_file.
    clear : out_tab, i_record, filetable.
    clear : user_mail_id, password.
else.
    write : 'payslip not generated'.
endif.
end-of-selection.
Please Check....

Getting error message while updating Job attributes using PP03 for IT1641

Hey Guys,
We are getting error message while updating Job attributes using transaction PP03 for IT1641 (WC Attributes for JOB): 'Client has status not modifiable'.
Update to the infotype 1641 should not require open SAP system. Would anyone suggest any SAP note/solution?
Thanks...
Edited by: Karan Gheewala on Apr 3, 2008 9:06 PM

Solved using Note 123383 - WC: Customizing worker's compensation tables
Thanks,..

Error message while doing delivery

I am getting an following message while doing delivery
Material 20000019 doesnot exist in storage location DLPT 2120
Storage location was deleted since material was not maintained correctly
No Schdule line is due for delibery upto the selected date
Please guide me with the solution.

Dear Sanjay,
First of all, I would like to suggest to check the "Organizational Level" data, with which Material was created in T. Code: MM01.
Check the "Plant", along with "Sales Org" and "Dist. Chnl" in T. Code: MM02
Also, check the "Strorage Location" in T. Code: MM02
Select the Views: Sales: General Plant data/storage location and then go to organizational elements and enter the plant and storage location, save it.
Also, on to the same screen up there, in Menu-Bar:
Enviornment --> Sock Overview
It will lead you to Screen: MMBE
Check Stock for the Material.
Best Regards,
Amit
Note: I am a bit confuse with your statement:
Storage location was deleted since material was not maintained correctly
Do you mean that, You have removed "Strorage Location - DLPT 2120" from the Material Master "20000019"?

Getting error message while clicking on proposal button in Automatic Py.Pr

When trying run Automatic payment program, clicking on proposal , getting error message "Company codes SAG1/SAG1 do not appear in proposal 12.05.2010 SAG1;correct"
Please help me in resolving this error message.

Hi Sagar,
This may happen when the particular line items are entered in another proposal and not exequted fully.
So system will block these line items in old app run and will not allow in new app.
you can over come by exequting the old APP run or deleting values in previous APP run and run new APP.
Regards
babu.

Price error message while creating production order- Urgent

In past i was getting warning message of 'No price could be determined for material/batch and Plant" message no CK 465 at the time of saving the production order after creation but now it has stopped even though there is no price in material amster.
I changed the configuration to Error message (TC: OPR4_PPCO) and it works but why not for warning message?
Thanks

Please confirm where i should check for Activity price?
But then why we are able to get error message.
Reexplain:
Creating a production order which do not have standard cost in material master.
While saving, getting a error message'No price could be determined.......'
Now changing the message to Warning through configuration using TC: OPR4_PPCO
Now again creating the production order and saving
Expectation to have same message as warning but not getting anything.
Thanks
Edited by: vineet garg on May 1, 2008 12:14 AM

How do I stop getting error messages while creating a NEW iTunes account?

I'm new to MAC. Have been a PC user for nearly 15 years, so I am learning. Recently tried to login into iTunes. I wanted to start a digital music library as I am YEARS behind in that area. However everytime that I try to 'Create a New Account' on iTunes I get the following message:
Session Timeout. Your session has timed out. Please try this operation from the beginning.
I have repeatedly quit iTunes and tried to create a new account. I have downloaded the newest version of iTunes. Re-started my computer. It does not seem to matter what I do, I cannot create an account for myself and I always get the same error message. What should I do to resolve this?
Thank you,
sun_teacher

See the thread here:
http://discussions.apple.com/thread.jspa?messageID=8622337&tstart=0
We all had the same problem.

WRT350N error message while doing Vista back-up

I have a hard drive attached to the USB port on this router. While attempting a backup from Vista, I get this error message: "cannot create a file when that file already exists."
I have a feeling that this is something not eaisly fixed. User has admin rights on both the Vista box and router and the user name and password for that user are the same on both.
Any help would be appreciated.
Dana

It might be something do with the User Permissiong, which you have created on your Router. Make sure you have given appropriate rights to the users which you have created on your Router.
Login to the Router setup page, Click on the Storage Tab, Below the storage tab you will find a sub tab "Administration" you will be able to see the users which you have created on your Router and their permissiong.
Again below the Storage tab you will see the sub tab "Disk" click on it and under the "Shared Folders" you will see the folders which you have created on your Disk, Click on Edit and under Access check the User and click on (>>) to give a user full rights and click on Save Settings.
Now on your computer, You need to Re-Map the network drive on your computer and now check if you are able to transfer the files on your Drive.

Error message while doing data migration

Hi all
When im doing data migration for material master through Z transaction ,it is updating global DIR documents for material while doing this ,im getting the error and the transaction is stopped intermediately the error message is CHANGE MASTER STATUS DOES NOT ALLOW CHANGES no error message number.
Kindly sujjest where is that error is coming,it would be very helpful

It seems you are using engineering change management and your change number's status is not proper (CC01, CC02, CC03; table AENR).
Configuration of the status is in T419S (use SM30 + T419S) - but I guess the problem is about your change number not about config...
How your Z-program is working, we don't know; contact the responsible functional/technical consultants.
Edited by: Csaba Szommer on Aug 19, 2011 8:41 AM

Error message while doing GRN

Dear Experts,
We are facing some "entern error" while doing MIGO of any PO. Also their is no message type and no. It's just say entern error.
Please guide us in this topic.
What I feel is someone has created this error message manually. So please guide us where do can we change this message into no message type.
Thanks and Regards
Raghav Puranik

Hi Raghav,
Please check it there is any user exist activated in your MIGO transaction. If you were coded any exit it will populate such a message.
Also, Let me know your message details,
Whether it is standard message or customized by business?
Please double click it on your error message and check it message application area..
Go to Transaction code SMOD - and deactivate your exit data if used anything.
Thanks,
Thiru

USER IS GETTING ERROR MESSAGE WHILE DOING PM ORDER COLLECTIVE CONFIRMATION

Similar Messages

Maybe you are looking for