User is unable to appoint an employee from the previous tax year

Hi Experts,
Can anyone resolve this issue please...
User is unable to appoint an employee from the previous tax year ( 01/12/2010), Appointment date 01/12/2010 for an employee Please asist...
Regards
Sav

OK .... last user insalled software that was not owned by company. Software removed bug solved.

Similar Messages

XML Report completes with error due to REP-271504897: Unable to retrieve a string from the Report Builder message file.

We are in the middle of testing our R12 Upgrade. I am getting this error from the invoice XML-based report that we are using in R12. (based on log). Only for a specific invoice number that this error is appearing. The trace is not showing me anything. I don't know how to proceed on how to debug where the error is coming from and how to fix this. I found a patch 8339196 that shows exactly the same error number but however, I have to reproduce the error in another test instance before we apply the patch. I created exactly the same order and interface to AR and it doesnt generate an error. I even copied the order and interface to AR and it doesn't complete with error. It is only for this particular invoice that is having an issue and I need to get the root cause as to why. Please help. I appreciate what you all can contribute to identify and fix our issue. We have not faced this issue in R11i that we are maintaining right now for the same program which has been running for sometime. However, after the upgrade for this particular data that the user has created, it is throwing this error REP-271504897.
MSG-00100: DEBUG: Get_Country_Description Return value:
MSG-00100: DEBUG: Get_Country_Description Return value:
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-271504897:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-271504897: MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: AfterParam_Procs.Populate_Printing_Option
MSG-00100: DEBUG: AfterParam_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 117
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choi
Report Builder: Release 10.1.2.3.0 - Production on Tue Jul 23 09:56:46 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.

Hi,
Check on this note also : Purchasing Reports Fail When Changing Output To XML REP-0002 REP-271504897 REP-57054 (Doc ID 1452608.1)
If you cant reproduce the issue on other instance, apply the patch on the test instance and verify all the funcionality related to the patch works OK. Then move the patch to production. Or you can clone the prod environment to test the patch.
Regards,

REP-0002: Unable to retrieve a string from the Report Builder message file;

Hi,
I've a custom report in which i need to display a large string, of more than 4000 characters. To cater to this requirement i've written a formula column which displays string upto 4k characters and for a string of size beyond 4k i am calling a procedure which uses a temp table having a clob field.
For a small string the report runs fine but whenever a large string requirement comes into the picture, said procedure gets triggered and i get REP-0002: Unable to retrieve a string from the Report Builder message file.
OPP log for the same gives an output as under:
Output type: PDF
[9/21/10 2:17:12 PM] [UNEXPECTED] [388056:RT14415347] java.io.FileNotFoundException: /app/soft/test1udp/appsoft/inst/apps/e180r_erptest01/logs/appl/conc/out/o14415347.out (No such file or directory)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
Report Builder 10g
BI Publisher's version : 4.5.0
RDBMS Version : 10.2.0.4.0
Oracle Applications Version : 12.0.6
Searched for the same on metalink and found Article ID 862644.1, other than applying patch and upgrading version of BI Publisher is there any other workaround to display a comma seperated string as long as 60k characters, If any please suggest.
Thanks,
Bhoomika

Metalink <Note:1076529.6> extracts
Problem Description
When running a *.REP generated report file you get errors:
REP-00002 Unable to retrieve string from message file
REP-01439 Cannot compile program since this is a runtime report
Running the same report using the *.RDF file is successful.
You are running the report with a stored procedure,
OR you are running against an Oracle instance other than the one developed on,
Or, you recently upgraded your Oracle Server.
Solution Description
1) Check that the user running the report has execute permissions on any stored
SQL procedures called. <Note:1049458.6>
2) Run the report as an .RDF not an .REP , that is remove or rename the .REP
version of the report. <Note:1012546.7>
3) Compile the report against the same instance it is being run against.
<Note:1071209.6> and <Note:1049620.6>

Desinger Workflow 2010: Unable to load workflow actions from the server. Please contact your server administrator?

Hello,
I am facing a problem from last some days..
When I am trying to open/create/update workflows from Designer 2010, then designer giving me an error "Unable to load workflow actions from the server. Please contact your server administrator".
I researched on internet for this error and found some possible reason like
Login user Permission issue
Error in custom actions
So that I checked for permission for login user, but it has administrator rights. and I tried to open workflow by removing custom activity code, but still exist.
also if I tried to create/update workflow for another site on same server then it works without any problem.
Can anybody please help me?
Many thanks,
Nitin
N i T i N

Hi NiTiN4u,
Thanks for your post.
First, here are some troubleshoot workflow error form Microsoft site:
http://office.microsoft.com/en-gb/sharepoint-designer-help/troubleshoot-workflow-errors-HA010237912.aspx#BM20
Second, have you tried to close the site and open it again in SharePoint Designer 2010?
Third, try to restart your IIS and share the results.
SharePoint 2010

I am unable to e-mail photos from the camera roll

I am unable to e-mail photos from the camera roll, but if I paste the photo into an e-mail I can send it just fine. This seem to be an "exchange"-problem from looking at people with similar problems (ex. Hotmail, but this is a company server), but I've been unable to find a solution. I could do this a week ago, other users on the same server can do it. Tried a soft reset and tried removing and adding the e-mail account, but still the same problem. Ideas anyone?

More info: I can "send" the e-mail, I hear the "swoosh"' but it is never received on the other end.

"This message may not have been delivered to User Name because there was no response from the server." in IM chat

Hello All,
Sometime users are getting below error message on the IM windows when they having P2P IM Chat.
"This message may not have been delivered to User Name because there
was no response from the server."
I can see below error on the Lync 2013 Monitoring page.

Hi,
Please make sure all required ports have been allowed. You can verify that all ports are open can accepting connections using telnet.
Telnet from External Client:
Test to SIP.domain.com 443/SIP
Test to WebConf.domain.com 443/PSOM
Test to AV.domain.com 443/STUN
Telnet from Lync 2013 Edge:
Telnet to Pool.domain.com 5061/SIP
Telnet from Lync 2013 Pool:
Telnet to LyncEdge.domain.com 5061
Telnet to LyncEdge.domain.com 443
Telnet to LyncEdge.domain.com 5062
Telnet to LyncEdge.domain.com 4443
Telnet to LyncEdge.domain.com 8057
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Unable to determine Physical Disk from the VM manager : 3.2.1

Unable to determine Physical Disk from the VM manager :
OVM manager : 3.2.1.516
VM Server : Available disks on vm server
# fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 13 104391 83 Linux
/dev/sda2 14 405 3148740 83 Linux
/dev/sda3 406 536 1052257+ 82 Linux swap / Solaris
Disk /dev/sdb: 80.0 GB, 80000000000 bytes
255 heads, 63 sectors/track, 9726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 13 104391 83 Linux
/dev/sdb2 14 9328 74822737+ 83 Linux
/dev/sdb3 9329 9459 1052257+ 82 Linux swap / Solaris
Disk /dev/dm-0: 80.0 GB, 80000000000 bytes
255 heads, 63 sectors/track, 9726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/dm-0p1 * 1 13 104391 83 Linux
/dev/dm-0p2 14 9328 74822737+ 83 Linux
/dev/dm-0p3 9329 9459 1052257+ 82 Linux swap / Solaris
Disk /dev/dm-1: 106 MB, 106896384 bytes
255 heads, 63 sectors/track, 12 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
Disk /dev/dm-2: 76.6 GB, 76618483200 bytes
255 heads, 63 sectors/track, 9315 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/dm-2 doesn't contain a valid partition table
Disk /dev/dm-3: 1077 MB, 1077511680 bytes
255 heads, 63 sectors/track, 131 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/dm-3 doesn't contain a valid partition table
#

thanks for your prompt response.
I am aware of that we can't use any free spaces where the VM is installed.Hence the additional storage added to the server.
1. Install VM Server on 80GB HD ( /dev/sdb)
2. Later, i added 500GB to the storage ( no installation - just the disk ) ( /dev/sda)
Same configuration worked fine in 3.0, now i am not able to identified the additional disk which was added later with 3.2.1.

Conflict Resolver Sync Error - Unable to retrieve conflict information from the sync server

So I have been using iTunes with my iPhone 3GS and now my iPhone 4 to sync with my Outlook for many years now and it has been flawless.
I recently bought a new iPad and started syncing it as well.
Now as of late, after every 2 or 3 syncs, I get an error from iTunes displaying the Conflict Resolver and it says there are 42 sync conflicts.
When I try use the Review Now button it shows up and the issues are between my iPhone and Outlook and are only related to contacts.
As soon as I try to choose which record to resolve, the window immediately disappears without giving me a chance to finish and I get another dialog window with the error:
Unable to retrieve conflict information from the sync server.
Please try again the next time the conflict resolver window is presented.
When I try to sync again it seems to be fine. But then after I sync my iPad and theny iPhone again it shows up and it still won't let me resolve the conflicts.
I have tried the following:
1) Rest Sync History on all devices
2) I have had iTunes replace all the contacts on the iPad from iTunes
3) I have changed the conflict resolver to only notify when 50% of the data will be changed
I have had no such luck.
If I add a contact to Outlook or to my iPhone and then sync it seems to be syncing the new addtions correctly. However, I cannot get this issue with this 42 conflicts resolved for some reason. This has been going on for a month now.

Here is the solution.
Rationale: You want to be able to have the dates on your items (notes, contacts) on your iphone to be the same as on outlook. This will eliminate any sync conflicts. You will also notice that if you modify something on the iphone and sync, you will lose the modification you made.
Steps:
1) In outlook, export the data (contacts, notes) to a CSV file
2) Delete you notes/contacts in outlook
3) Sync your iphone and select replace information on this iPhone (in iTunes)
4) Now your contacts and notes will be empty on both your iPhone and Outlook
5) Now import your contacts and notes from the CSV files back into outlook. What this does is put the current date and time on every individual item
6) Sync your iPhone to iTunes normally
7) everything will work correctly now with no sync issues and no conflicts.
Sherali

I am unable to transfer song bought from the itunes store to my ipod- can anyone please assist?

I am unable to transfer song bought from the itunes store to my ipod- can anyone please assist?

What happens when you try?
If the song is an older purchase (from more than a few years ago), it may have DRM (copy protection). You can check by selecting the song on a list in iTunes, and doing a Get Info (right click - Get Into). On the Info window Summary tab, if Kind is Protected AAC audio file, it has DRM. Also note what it says there for Apple ID. You need to authorize the computer you use with the iPod to play content purchased with that Apple ID.
From the iTunes menu bar, under Store, select Authorize This Computer. Enter the Apple ID (and password) used to purchase the song. One computer can be authorize for multiple Apple IDs.
NOTE: More recent iTunes Store song purchases do not use DRM, although other type of media (such as TV shows and movies) still do.
If that's not the cause of your problem, please post back with more details...

Unable to browse OPC Server from the selected machine / Error -2147221163 occurred at GetOPCServerList.vi

Hallo,
I just installed LabVIEW 8.2 DSC-Module and tried to configure a OPC Client Instance. I get the Error "Unable to browse OPC Server from the selected machine / Error -2147221163 occurred at GetOPCServerList.vi". I have no OPC-Server installed, but is there no Demo-Server?
Thank you
Thomas

This issue might be related to opcenum not being registered correctly. Please follow the steps explained in this document to fix this problem.
As OPCdemo follows the OPC 1.0 standard it is not supported by the OPC client in LV DSC 8.x which supports OPC 2.0 and 3.0 servers. You can download an OPC 3.0 compliant demoserver from Matrikon.
I hope that helps,
Jochen Klier
National Instruments Germany

HT1414 I am unable to restore my IPhone from a previous back up as the password appears to be incorrect, how can I access a previously stored back up?

I am unable to restore my IPhone from a previous back up as the password appears to be incorrect, how can I access a previously stored back up?

Use the correct password. If you don't know it there is no way to bypass it.

Unable to purchase new apps from the App Store

Since updating to the latest iOS I am unable to DL new apps from the App Store.

Might be an error of some sort, try logging out of your iTunes account on your iDevice and logging back in and see what happens

HT1766 I have installed the new software onto my iPhone4; I have backup my data; I am unable to progress any further from the 3 iPhone options - I selected from iTunes b/up which worked but has stalled since requested to connect to iTunes

I have updated the new software onto my iPhone4; I have backup my data; I am unable to progress any further from the 3 iPhone options - I selected from iTunes b/up; then the iPhone requested that I connect to iTunes which I have done and it has now stalled - nothing has happened.

Hey Miss Apple,
Thanks for the question. I understand you are experiencing issues with restoring your backup from iTunes. The following resources may help to resolve your issue:
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/TS2529
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/TS1275
Thanks,
Matt M.

Syncing my phone it says I have conflicts when then I get the message "Unable to retrieve conflict information from the sync server. Please try again next treset Sync history and hasn't helped.

When syncing my phone it says I have contact conflicts which I try to resolve and then I get the message "Unable to retrieve conflict informaiton from the sync server. Please try again next time the conflict resolver window is presented". I have reset the Sync History but hasn't helped. Suggestions?

Here is the solution.
Rationale: You want to be able to have the dates on your items (notes, contacts) on your iphone to be the same as on outlook. This will eliminate any sync conflicts. You will also notice that if you modify something on the iphone and sync, you will lose the modification you made.
Steps:
1) In outlook, export the data (contacts, notes) to a CSV file
2) Delete you notes/contacts in outlook
3) Sync your iphone and select replace information on this iPhone (in iTunes)
4) Now your contacts and notes will be empty on both your iPhone and Outlook
5) Now import your contacts and notes from the CSV files back into outlook. What this does is put the current date and time on every individual item
6) Sync your iPhone to iTunes normally
7) everything will work correctly now with no sync issues and no conflicts.
Sherali

Cannot access conflicts unable to retrieve contact information from the sync server.

ITunes error message Cannot access conflicts unable to retrieve contact information from the sync server.

I got this advice from Gator5000e on Apple Supposrt Communities:
I use Windows 7 so the path to find this file
might be different under a different OS.
Close iTunes. Search on the words "conflicts.synconflicts".
I renamed it to conflictsold.synconflicts the .synconflicts is the extension so you can't
rename that.
Then restarted Windows. As a test I made changes to a note in NOTES on each device. Then connected them one at a time to my computer which has iTunes 10 and Runs Windows 7, it worked !

User is unable to appoint an employee from the previous tax year

Similar Messages

Maybe you are looking for