User License for Cisco CUCM 7.1.3

Hi
  I need 30 unit license for Cisco Communication Manager 7.1. But I found that it's already  end of sale.
 I want the unit license part number for cisco cucm 7.1.3 version.
 And i found revised part numbers for user license (CUCM-USR-LIC ) but those for 8,x versions. If i purchase that will it support in CUCM 7.1.3?
Thanks in advance.

Hi,
CUCM 7 is already end of sale.
 CUCM 7.1.5 supports UCL.If we refer the ordering guide of CUCM 8.5, you can get UCL licenses [Basic/essential].
http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/UC_8_6_OG.pdf
What I think if u place the order , you should get the licenses and at the backened, it would be DLU.
You can also speak to Cisco SE for further clarity.
regds,
aman

Similar Messages

  • How to get end user license for BT stack?

    How do i get an end user license for BT stack ver 5 ?
    Thank you !

    Talk with BT device manufacturer. If you use BT device with Toshiba BT software they should help you to get update.

  • User Licensing for Approvers in GRC AC 5.3

    Hi all
    I am looking for some clarification regarding the user licensing.
    In CUP, we have managers who will need AEApprover role to approve the user requests.
    In our case, we have SAP EP as the single point of entry to the application (both ECC & GRC AC). Also
    some of the managers who are involved in the approval process (in CUP) do not need access to the ECC backend system.
    So managers only need an entry in the  AD(LDAP) which is the datasource for SAP EP, GRC AC. This means that GRC UME (authentication system for CUP) is the only place where the managers user profile are maintained.
    Will these managers be accounted for SAP licenses?
    My answer is No. The managers will not be accounted for SAP (prof/ limited prof) license cost as they do not have any access to the ECC system. All users in GRC system will be accounted for GRC AC licensing ( which is based on the operating budget of the organazation)
    Appreciate if you can confirm whether my understanding is correct.
    Thanks
    Keerthika

    Closing the request as this has been answered in the forum and I got a confirmative answer from SAP too..
    Rationale:
    GRC users dont count for SAP ECC license unless they have a dialog user account in the ECC system.
    Thanks
    Kee

  • Virtual Users License for OATS 9.1

    Hi,
    Kindly provide me the following information related to OATS 9.1:
    1. Number of users can be tested using evaluation version of Oracle Load Testing?
    2. Duration period for using evaluation package of OATS 9.1?
    3. license cost catalogue information for procuring permanent license for oracle Load Testing.
    Regards,
    Mahesh.S

    Hi Raj,
    I had gone through price list file. I was not able to interpret information clearly.
    Could you just explain me what following terms denotes:
    1) Named user plus
    2) Software update & support
    3) Processor license and
    4) Software update license & support
    Regards,
    Mahesh

  • User License for Netweaver as Java system

    Hello Experts,
    May i know how do i assign user license data to a user id created in UME? Like in ABAP Stack, we can assign the license type profressional using SU01, under tab license data. How do we perform the same thing in JAVA only system?
    If the above is possible, how do we extract the ids with license like what we can do in ABAP by using tcode USMM, and export to LAW file ?
    Appreciate

    Hi ,
    You may require your Account manager's assistance to get the details (what componens you have & licensed).
    Basically User license validity based on ABAP side.
    What is your Datasource for Portal?
    Portal doesnt give your to validate User licnese (like SLAW tool inABAP).
    Is there any specific requirement for you to send Java license  for users?
    Regards
    Nagaraju

  • User licenses for BO

    Can anybody have any idea, if we have 2 licenses each for 25 users, can they be used as 50 user install? if not what can be done to get 50 user license?

    Hi,
    which version of BO do you use? If you are on XI R2 or XI 3.x then you can add both license keys in the CMC under License keys. The number of total licenses is then the sum of the licenses from each key.
    Regards,
    Stratos

  • Contact Center Enhanced License for Cisco 2951 Router

    Hi,
    I need an urgent help to get the exact part number/details of Contact center enhanced license.
    I couldn't find in CCW or any other tool about this license with Cisco 2951 Router (CISCO2951-V/K9).
    To run this license on mentioned router, do we need to order it separately or we can take it with router?
    Please respond asap.

    Hi Andre,
    I was just refering the Ordering guide which says
    Updating UCSS contract when upgrading Unified CCX licenses
    UCSS cannot be upgraded from one category to another (e.g. Standard to Enhanced). If
    the customer upgrades within the solution, they need to purchase UCSS for greater or
    equal value to cover the new version, then they can request a credit on the unused term
    of the original purchase from Customer Service
    you can also speak to [email protected] for more details on ESW.
    regds,
    aman

  • Security License for Cisco 3900 Series

    Hi,
    I am having    Security License  (SL-39-SEC-K9)  for Cisco 3900 Series router, Can somebody help me to provide sample config to configure 3945 router to act as firewall. Is there any difference with the native IOS based firewall config..
    Regards,
    Mukesh           

    Here is a detailed instruction on ISR G2 licensing (including downloading, installing, rehosting license, etc.).
    Usually, you just need to go to cisco.com/go/license, enter PAK and follow detailed instructions.
    HTH
    Alexandr

  • ASA license for Cisco IP Phone over VPN

    Hi,
    Are there special licenses required on the ASA to use Cisco IP Phones (Hard phone) over SSL VPN connection?
    Thanks

    Hi,
    You can purchase the phone proxy license. This elimiates the need to build a VPN tunnel for voice traffic.
    It is not mandatory to purchase this license however.
    From the ASA configuration guide:
    http://www.cisco.com/en/US/docs/security/asa/asa83/configuration/guide/unified_comm_phoneproxy.html#wp1144845
    "The  Cisco Phone Proxy on the adaptive security  appliance bridges IP  telephony between the corporate IP telephony  network and the Internet  in a secure manner by forcing data from remote  phones on an untrusted  network to be encrypted. "
    Don't forget to rate all posts that are helpful.

  • Licensing for Cisco ESA c380

    I am putting a recommendation together for a client to upgrade their existing Cisco ESAs and trying to figure out how the licensing works.
    We are looking at c380s across multiple sites, upgrade from their current models which are c160s. Questions:
    1.) Do the mailbox licenses need to be procured separately for each c380. For e.g., if the total mailbox no. is 20000 across 4 sites, can the mailbox licenses be bought together and 'split' on individual installs of c380s OR they have to be bought separately for each c380.
    2.) If upgrading from the existing ESAs to new, can the licenses be imported from the existing c160s (which will be decommissioned) and exported to the new ESAs?

    1) each hardware appliance is licensed separately.  You'll need to work with account team/reseller to provide the #/size license as appropriate.
    2) If upgrading - yes, you'll just need to transfer the existing "as-is" license from the serial number of the existing appliance to the serial number of the newly purchased appliance.  Should be fairly exact to the RMA steps provided in the following article:
    http://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/118000-technote-esa-00.html
    I hope this helps!
    -Robert
    (*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

  • User Guide for Cisco UC Phone 7937

    Can anyone supply me with a URL for downloading a basic user's guide for the UC 7937 Phone?

    Hello ttrovato 1,
    Here are some links where you will be able to find the information about the conference ip phone 7937G.
    Administration guide:
    Link:http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cuipph/7937g/6_0/english/administration/guide/37adm60.pdf
    Phone guide:
    Link:http://www.msl.ubc.ca/sites/default/files/cisco-teleconference-phone-userguide.pdf
    Latest Firmwares:
    Link:https://software.cisco.com/download/release.html?mdfid=281433475&softwareid=282074289&release=1.4%285%29&relind=AVAILABLE&rellifecycle=&reltype=all
    Specifications Overview:
    Link: http://www.cisco.com/c/en/us/support/collaboration-endpoints/unified-ip-conference-station-7937g/model.html
    Enjoy it.
    Regards,
    Gerson

  • User license for IPCC

    I am try to verfiy the agent number a licenses I have for IPCCE v. 7.1. I've trying lookin in the C drive of the IP IVR but seem to not be able to find the file. can someone point me in the right direction.

    Then it does not matter as CTIOS does not enforce. You know how many you purchased, correct?
    Are you trying to understand how close you are going to the number you purchased?
    In other words, what is the max number of concurrently logged in agents you have had on the system over the last few weeks?
    Regards,
    Geoff

  • Security License for Cisco 3925

    Hi,
    I have got cisco 3925 without security license. Now I have got the L-SL-39-SEC-K9 license and need to install it. What is the process of installing this license.
    Thanks in advance
    Regards,
    Mero

    Here is a detailed instruction on ISR G2 licensing (including downloading, installing, rehosting license, etc.).
    Usually, you just need to go to cisco.com/go/license, enter PAK and follow detailed instructions.
    HTH
    Alexandr

  • Login user/pass for Cisco 1751-V

    Goodevening to everyone!
    i'm new in the world of router and i need to do a port forward with my router (Cisco 1751-V). i don't know exactly what i must do, but i read at PortForwarding.com that i must login in my router for set the port, but i don't know how to do that!!
    also i'm Italian and i have only a little experience with English language!
    If someone could help me i'll be very happy of this!!
    Thanks in advance!

    If you want to configure the router through the Cisco IOS command-line interface (CLI), you must connect the router console port to a terminal or PC. The cable and adapter required for this connection are included with the router.
    To configure the router with a PC, the PC must have some type of terminal emulation software installed. The software should be configured with the following parameters: 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control. Refer to the Cisco 1700 Router Software Configuration Guide for detailed information about configuring the router using Cisco IOS software.
    This link should start you in the right direction:
    http://www.cisco.com/en/US/products/hw/routers/ps221/products_installation_guide_chapter09186a0080091694.html#wp1015235
    Please rate helpful posts.

  • Licensing for Cisco Network Topology Icons

    A large collection of Cisco network topology icons is available for download at http://www.cisco.com/web/about/ac50/ac47/2.html. These icons are pretty much the standard for network topology diagrams.
    I would like to know if Cisco allows the use of these network topology icons in training materials developed and sold by individuals/companies other than Cisco.

    Try this
    http://www.cisco.com/en/US/solutions/ns340/ns414/ns742/ns982/cvd.html link.
    Thanks
    Kunal

Maybe you are looking for

  • Lion produces weird trackpad behavior in Angry Birds

    I upgraded to Lion this week. I know there are all sorts of new trackpad features, but the probem is that it messes up a lot in Angry Birds. For example, the various finger-swipes have unpredictable results; instead of resetting the screen, it might

  • File Importing Renaming Options

    In the file import and renaming section, I'd like some more flexibilty when renaming my files on import. Currently, I have to use third party software to do this, but I'd like to have Lightroom to be able to tell the folder number (from the camera-cr

  • Error to connecting business rules for Planning application outline

    Hi all, I recently migrated database schemas from uat to prod.i configured evrything successfully.when I loged into EAS console with user(other than admin)that user has all acces to create business rules, I tried to create new business rule to select

  • Low disk space ,,,help.

    low disk space on recovery drive,,plz help.

  • Enable time based publishing on more tha one folder

    Is it possbile to enable time base publishing on more than one folder at a time? I have a large hierarchy and it would be nice if I didn't have to change alle the folders.