USER_LOCK PKG

can anyone tell me
how to run USER_SQL pkg..........
as i have seen its $ORACLE_HOME/RDBMS/ADMIN/userlock.sql....
i wanna know that how can i grant execute right on this pkg to role PUBLIC....
regards soumen

Hey,
this is in here twice!
USER_LOCK pkg

Similar Messages

Can AAMEE 3.1 create pkg for CS6 Design Standard? or just CS6 Mast Collection?

can AAMEE 3.1 create pkg for CS6 Design Standard? or just CS6 Mast Collection?

ok, thanks, just wanted to make sure. I have a volume serial no. for CS6 Dest Stan.
AAMEE 3.1 is for CS6 Suite, so should be good for all CS6
I created a pkg for CS6 Mast Coll using AAMEE 3.1 a few months ago and works fine (.msi)

I am trying to download Silverlight to use Netflix, however I just get a silverlight_developer.pkg that opens in Terminal and nothing happens.

I have Mac OS X Lion 10.7.2 and I'm having trouble downloading Silverlight to watch Netflix. I've tried several different ways from researching online. It just downloads a silverlight_developer.pkg and when I open it it opens in Terminal and says Silverlight_Developer.pkg-bash-80x24. I'm not a computer genius so I don't knwo what any of this means, but I knwo its not right. Please help!!

This answers the question for Lion users
https://discussions.apple.com/thread/3891253?start=0&tstart=0

I am trying to install the driver for a Wacom Bamboo Pad. The dmg from Wacom downloadsand will opens, but when I try to install it the message "Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed"

iMac late 2009 3,06GHz Intel Core Duo; 500gb hard drive, 12gb memory. OS X 10.8.5 (Mountain Lion)
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed.'
I have been trying to install the driver for a Wacom Bamboo Pad. There are several driver packages listed on the website (the device is supplied ready to run with Windows devices) and I have tried tried downloading all the available drivers which apply to my set-up. Some will not open at all and I get a 'Damaged' message on my screen. Of the ones which open, I can download the .dmg and expand it but when clicked it opens as a window with multiple choice of languages and an icon which instructs you to click to open.
If I do this some versions repeat the 'damaged' message but the later ones generate a window saying:-
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed.' - this is as far as I can get it to go; most frustrating!
I understand that Apple's security updates have recently included an alteration that causes this result, and that there is supposed to be a legal (i.e. Apple sanctioned) workaround to allow files like this to be opened. If this is so, can anyone enlighten me?

Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah

I downloaded an update for my Safari web browser to "snow leopard". When I click on the .dmg file, a window opens up with a .pkg file but when I click on the .pkg file I get a prompt saying that it doesn't know what program to open it with. with a

I downloaded an update for my Safari web browser to "snow leopard". When I click on the .dmg file, a window opens up with a .pkg file but when I click on the .pkg file I get a prompt saying that it doesn't know what program to open it with.

I suspect if you're trying to open a file in 08 that's been opened in 09 the file has been updated to 09 and will not open in 08.

Replacing .pkg files to fix "Error: No valid packages"

Hi all -
I've just learned the hard way that I'm not supposed to delete files from the Receipts folder.
I've done my due diligence, so I know that I need to replace at least "BaseSystem.pkg", but I have questions;
Is it ok, if I'm running 10.4.9, to copy it from my other mac running 10.3.9?
Should I try to replace the other .pkg files I deleted?
Should I just copy the whole Receipts folder?
What'll happen if I get packages I didn't have before, or that don't match the versions of the apps they're supposed to be associated with?
Sorry for all the questions, just want to be certain so I don't have to learn any more lessons the hard way.
Thanks!
OBTW: I've also finally learned - after 10+ years as a Mac user - to back up my hard drive.
PowerBook G4 Ti 550 (10.4.8), PowerMac G4 466 (10.3.9) 3rd gen iPod 30gig, 2nd gen Nano 8gig

Hi Dennis
my basesystem.pkg is specific to the 10.4 Tiger that was originally installed on my iMac G5 - numerous updates have not altered it.
I'll happily let you have a copy of my Tiger basesystem.pkg file - just email me.
What issues came up for you after deleting the files?
here's a list of the pkg files in my receipts folder....
BSD.pkg
CPU_AppleWorksCH.pkg
BrazilianPortuguese.pkg
BaseSystem.pkg
CPU_AppleWorksS.pkg
AppleAppSupport.pkg
BroadbandTunerUninstaller.pkg
Flip4Mac Web Plugins.pkg
Flip4Mac WMV Player Installer.pkg
French.pkg
CPU_AppleWorksZ.pkg
CPU_AppleWorksE.pkg
AppleMouse_PPC.pkg
Automator.pkg
GarageBand20Loops.pkg
GarageBand_202.pkg
2005 World Book Installer.pkg
Dutch.pkg
DVDPlayerUpdate.pkg
iChat.pkg
iDVD.pkg
iDVD5Themes.pkg
iDVDThemes.pkg
iMovie.pkg
iMovieHD502.pkg
iPhoto.pkg
iPhoto504.pkg
iPhotoContent.pkg
Italian.pkg
iTunesX.pkg
iWork Fonts.pkg
J2SE50Release3.pkg
J2SE50Release4.pkg
Japanese.pkg
MacOSXUpd10.4.7PPC.pkg
Java.pkg
Java131and142Release2.pkg
Keynote 2.pkg
Korean.pkg
MacOSX-File-0.66.pkg
MacOSXUpd10.4.5PPC.pkg
MacOSXUpd10.4.6PPC.pkg
MacOSXUpd10.4.9PPC.pkg
MacOSXUpdate10.4.4.pkg
MacOSXUpdateCombo10.4.3.pkg
MacOSXUpdCombo10.4.8PPC.pkg
QuickTime716.pkg
Mail.pkg
MediaFiles.pkg
MigrationAssistant.pkg
Norwegian.pkg
OnyX.pkg
OxfordDictionaries.pkg
Pages.pkg
psync.pkg
Safari.pkg
SecUpd2005-009Ti.pkg
SecUpd2006-002Ti.pkg
SecUpd2006-004Ti.pkg
SimplifiedChinese.pkg
SecUpd2006-007Ti.pkg
Spanish.pkg
Swedish.pkg
TraditionalChinese.pkg
X11User.pkg
CPU_RegionalBoot.pkg
CPU_MarbleBlast.pkg
CPU_Nanosaur.pkg
CPU_WorldBook.pkg
Danish.pkg
GarageBand10Loops.pkg
Finnish.pkg
Flip4Mac QuickTime Components.pkg
AdditionalEssentials.pkg
Essentials.pkg
CPU_AppleWorksT.pkg
CPU_AppleWorksJ.pkg
CPU_AppleWorksK.pkg
CPU_AppleWorksTA.pkg
CPU_AppleWorksUS.pkg
CPU_AppleWorksF.pkg
CPU_AppleWorksH.pkg
German.pkg
iCal.pkg
iWork Extras.pkg
GarageBandApp20.pkg
GarageBandDemoSongs.pkg
CPU_AppleWorksDK.pkg
AsianLanguagesSupport.pkg
AppleMouseBluetoothPPC.pkg
iTunes.pkg
iTunesPhoneDriver.pkg
CPU_AppleWorksD.pkg
CPU_AppleWorksKH.pkg
CPU_AppleWorksN.pkg
AdditionalSpeechVoices.pkg
CPU_Help.pkg
CPU_Manual.pkg
AddressBook.pkg
DVDPlayerUpdate200506.pkg
AirPortTi2005-001.pkg
AppleIntermediateCodec.pkg

How can i re-link .mpkg and .pkg files to hidden Installer?

I am near the end of the process of setting up my new Mac Pro (early 2009) eight core. Quite the wonderful difference from my "Mirror Drive Door" dual 1.25 GHz machine!
The Mac Pro came with Mac OS X 10.6.2 installed. I updated this to 10.6.6 via Software Update along with a slew of other updates presented there. I downloaded and installed a bunch of software. Finally, I was ready to install iLife 11 from the "CPU Drop-in" DVD that was on top of the box when the computer was originally unpacked.
Unfortunately, it wouldn't even begin the install. The "iLife.mpkg" file, when double-clicked, returned the error message "no application associated with this document". Hours of investigation reveals that NO .mpkg or .pkg file will open; doing a "get info" on the files reveals that those files have lost their link to the Installer app.
AND since the only installer I can find is hidden in /usr/sbin, there is no way I can re-link .mpkg and .pkg files to it via "get info".
I downloaded Pacifist and used it to open the "Mac OS X 10.6.6 Combo" package and re-installed the Combo updater. Much to my surprise, that didn't fix the linking issue.
I've logged in as root, but still can't re-link the package files to the Installer as /usr/ is still hidden. Is there a way I can temporarily "un-hide" the /usr directory so that "get info; open with" can see it?
I've started from the Mac OS X installer DVD and repaired permissions on the hard disk and "repaired" the hard disk. No luck there either.
I did a clean install of Mac OS X 10.6.2 to a different hard drive and applied the combo updater and the packages worked as expected there. So some software I installed or by running a slew of updaters via Software Update broke the link between packages and the Installer.
I'm sure that re-linking to packages to the hidden installer app can be done via Terminal and possible other ways, but I don't know how to do it.
Short of doing a complete Mac OS X 10.6 re-installation and update and having to re-do several days of other software installations and data transfers, I'm hoping someone will offer some solutions or tips on how to solve my problem.
How do I re-link .mpkg and .pkg files to the Installer?

Thanks for the reply. I know I had previously checked for the missing installer in /System/Library/CoreServices/ and I rechecked and it's still not there. But your tip spurred me to check the test 10.6.6 installation on the other hard disk and yes! It's there!
A quick copy from the second hard disk to my current hard disk and doing the "get info" trick and everything now works wonderfully. Only one day lost to trying to figure this out. Now that the problem is fixed, quite the relief.

How do we move PKG from One d/b to another d/b?

Hi All,
In general, i will creating all the packages in Dev environment and will send the pkg files to DBA team to deploy in QA environmnet.
I would like to know, in general how do we move pkg's from one instance to another instance.
Thanks,
Anoo..

Thanks for the response, but i am not clear still since i will be sending the .sql & .Plb files to the DAB team.
Going forward i need to take care of this stuff, so can u give one more example on this.
Thanks,
Anoo..

I need to download a c6500-fpd-pkg.151-1.SY.pkg patch

I need to download a c6500-fpd-pkg.151-1.SY.pkg patch, but I do not have this permission, no sales staff and Cisco contract number. Which friends can send a copy to me, thank you!
My mail is [email protected]
[email protected]-----------------Log information----------------------------------------------------
Router(config)#power enable module 6
Router(config)#
Firmware compiled 11-Sep-12 14:49 by integ Build [26624]
*Mar 1 00:00:12.843: AFC6: Currently running ROMMON from S (Gold) region
*Mar 1 00:00:13.259: %SYS-AFC6-5-RESTART: System restarted --
Cisco IOS Software, trifecta Software (trifecta-SP-M), Version 15.1(1)SY, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 09-Oct-12 14:36 by prod_rel_team
*Oct 12 07:17:55.511: %DIAG-6-RUN_MINIMUM: Module 6: Running Minimal Diagnostics...
*Oct 12 07:18:01.663: %DIAG-6-DIAG_OK: Module 6: Passed Online Diagnostics
*Oct 12 07:18:02.035: %SVCLC-5-FWVTPMODE: VTP mode is set to non-transparent
*Oct 12 07:18:02.259: %OIR-6-SP_INSCARD: Card inserted in slot 6, interfaces are now online
*Oct 12 07:18:03.907: %FPD_MGMT-3-INCOMP_IMG_VER: Incompatible TRISUL FPGA (FPD ID=1) image version detected for WS-SVC-ASA-SM1 card in slot 6. Detected version = 1.8, minimum required version = 1.10. Current HW version = 1.1.
*Oct 12 07:18:03.907: %FPD_MGMT-5-UPGRADE_ATTEMPT: Attempting to automatically upgrade the FPD image(s) for WS-SVC-ASA-SM1 card in slot 6. Use 'show upgrade fpd progress' command to view the upgrade progress ...
*Oct 12 07:18:04.351: %FPD_MGMT-3-PKG_FILE_SEARCH_FAILED: FPD image package (c6500-fpd-pkg.151-1.SY.pkg) cannot be found in system's flash card or disk to do FPD upgrade.
*Oct 12 07:18:04.351: %C6KENV-4-LOWER_SLOT_EMPTY: The lower adjacent slot of module 5 might be empty. Airdam must be installed in that slot to be NEBS compliant
*Oct 12 07:18:04.355: The service application in slot 6 is shutting down. Please wait ...
*Oct 12 07:18:04.355: %FPD_MGMT-3-CARD_DISABLED: WS-SVC-ASA-SM1 card in slot 6 is being disabled because of an incompatible FPD image version. Note that the c6500-fpd-pkg.151-1.SY.pkg package will be required if you want to perform the upgrade operation.
*Oct 12 07:18:19.399: Service application shutdown completed for module 6
*Oct 12 07:18:29.619: %C6KPWR-4-DISABLED: power to module in slot 6 set off (FPD Upgrade Failed)
Router(config)#do sh ver
Cisco IOS Software, s2t54 Software (s2t54-IPBASEK9_NPE-M), Version 15.1(1)SY, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 09-Oct-12 14:43 by prod_rel_team
ROM: System Bootstrap, Version 12.2(50r)SYS3, RELEASE SOFTWARE (fc1)
Router uptime is 8 minutes
Uptime for this control processor is 8 minutes
System returned to ROM by power on
System image file is "bootdisk:s2t54-ipbasek9_npe-mz.SPA.151-1.SY.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco WS-C6506-E (M8572) processor (revision ) with 1785856K/262144K bytes of memory.
Processor board ID SAL171211Y9
CPU: MPC8572_E, Version: 2.2, (0x80E80022)
CORE: E500, Version: 3.0, (0x80210030)
CPU:1500MHz, CCB:600MHz, DDR:600MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Last reset from power-on
1 Virtual Ethernet interface
75 Gigabit Ethernet interfaces
5 Ten Gigabit Ethernet interfaces
2543K bytes of non-volatile configuration memory.
Configuration register is 0x2102

Jouni,
Yes, I got disappointed when I faced this problem at the first place of setup procedure and the FPD image was missing!
Albeit Cisco Support is a good and useful option, but I believe all products should get operational at first with no support service!
Anyway, if there is anybody who can help me to obtain that c6500-fpd-pkg.151-1.sy1.pkg image file, then he/she can writes to my email address, in case this forum is not the place to share Cisco files online!
Regards,
- Ali

"An error occurred while extracting files from the package "BaseSystem.pkg".

Hello!
I have a
MacBookPro5,5
Prozessortyp:Intel Core 2 Duo
Prozessorgeschwindigkeit:2.26 GHz
Anzahl der Prozessoren:1
Gesamtzahl der Kerne:2
L2-Cache:3 MB
Speicher:2 GB
Busgeschwindigkeit:1.07 GHz
Boot-ROM-Version:MBP55.00AC.B03
SMC-Version (System):1.47f2
Hardware-UUID:A2DD27C4-9829-5A4D-854B-485EF8A6B20F
Problem:
I upgraded Leopard to Snow Leopard. Everything worked fine for a month. To free up disk space I deleted some of the iPhoto flders (modfied and original images). Everything worked still fine. Shut down the computer. Next day it was incredibly slow. At the same time the indexing was running. I stopped indexing, but stll slow. Every operation took minutes. I tried all the tricks that I found in the internet (repaired file permissions, repaired disk, cleared PRAM , moved big filed from desktop, etc.). After 24 full hours of trying all this I decided to erase the hard drive and reinstall, directly from the Snow Leopard Install disk, but it fails after downloading the packages. Below is the part of the log. Then I tried to use the old Leopard install DVD to reinstall Leopard, it then sais estimated time 12 hours or so and eventually crashed, spitting out a lot of "reportcrash" in the log. What is going on? I'm running out of options. Any advice? Would zeroing the hard drive help? If nothing else I plan to buy a new hard drive, since the only explanation I have is that there is a problem with the hard driven although the disk utility says it is OK. I need a bigger one anyway. Any ideas? Thank you!
Aug 16 05:17:31 localhost OSInstaller[139]: IFPKInstallElement (191 packages)
Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: ----- Begin install -----
Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: request=PKInstallRequest <191 packages, destination=/Volumes/Macintosh HD>
Aug 16 05:17:36 localhost OSInstaller[139]: PackageKit: Extracting /Volumes/Macintosh HD/Mac OS X Install Data/BaseSystem.pkg (destination=/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root, uid=0)
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/DataPool.c:116 : Error: finished pool without filling it
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/commonUtils.c: 315: Error: fh_pread -1
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:236: Error: write failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:260: Error: futimes failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:829: Error: returning errno 22 from FinishStreamCompressorQueue
Aug 16 05:32:10 localhost OSInstaller[139]: PackageKit: Install Failed: PKG: extracting "com.apple.pkg.BaseSystem"\nError Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error") {\n NSFilePath = "/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root";\n NSLocalizedDescription = "An error occurred while extracting files from the package \U201cBaseSystem.pkg\U201d.";\n NSURL = "BaseSystem.pkg -- file://localhost/Volumes/Macintosh%20HD/Mac%20OS%20X%20Install%20Data/index.pro duct";\n NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\"";\n PKInstallPackageIdentifier = "com.apple.pkg.BaseSystem";\n}
Aug 16 05:32:10 localhost OSInstaller[139]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error")
Aug 16 05:32:11 localhost OSInstaller[139]: Install failed: Die Installation ist aufgrund eines Fehlers fehlgeschlagen. Wenden Sie sich an den Hersteller der Software.
Aug 16 05:32:13 localhost OSInstaller[139]: Allowing machine sleep.
Aug 16 05:32:15 localhost OSInstaller[139]: Memory statistics for 'Installation ist fehlgeschlagen' pane:
Aug 16 05:32:15 localhost OSInstaller[139]: Physical Memory Allocation: 139 MB wired, 259 MB trapped, 397 MB active, 7 MB inactive, 1246 MB free, 1650 MB usable, 2048 MB total

It sounds to me like your Internal Hard Drive is failing.
I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.

HT1222 hi i have a apple imac 27 2009 and i have purchased mountain lion but near the end it says An error occurred while running scripts from the package "mzps6175750011235388779.pkg"

hi i have a apple imac 27 2009 and i have purchased mountain lion but near the end it says An error occurred while running scripts from the package “mzps6175750011235388779.pkg”
can you please advise me what should i do to fix this

Some ideas.
https://discussions.apple.com/message/20034600#20034600

ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1

Hi,
i have the following message when i tried to install LR 5.6
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe Photoshop Lightroom 5.pkg_5.6 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
how can i solve this issue?
I am running on Mac with OSX 10.9.4
thanks in advance
Olivier

olebreth wrote:
how can i solve this issue?
A search of the site would probably be a good start:
https://forums.adobe.com/search.jspa?q=dw006

Failed to install the new kernel pkg

I just downloaded a new kernel pkg from
archlive-pkg
this is the new kernel pkg I downloaded.
kernel26-snapshot-2.6.31-rc6-git6-i686.pkg.tar.gz
when I ran
pacman -U kernel26-snapshot-2.6.31-rc6-git6-i686.pkg.tar.gz
, it complaint there is a conflict issue~
How can i install the package? thanks!
loading package data...
checking dependencies...
(1/1) checking for file conflicts [#####################] 100%
error: failed to prepare transaction (conflicting files)
kernel26-snapshot-2.6.31: /boot/System.map26 exists in filesystem
kernel26-snapshot-2.6.31: /boot/vmlinuz26 exists in filesystem
kernel26-snapshot-2.6.31: /etc/mkinitcpio.d/kernel26.kver exists in filesystem
kernel26-snapshot-2.6.31: /etc/mkinitcpio.d/kernel26.preset exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/3com/typhoon.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/acenic/tg1.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/acenic/tg2.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/adaptec/starfire_rx.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/adaptec/starfire_tx.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/advansys/3550.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/advansys/38C0800.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/advansys/38C1600.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/advansys/mcode.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/atmsar11.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/bnx2/bnx2-mips-06-4.6.16.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/bnx2/bnx2-mips-09-4.6.17.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/bnx2/bnx2-rv2p-06-4.6.16.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/bnx2/bnx2-rv2p-09-4.6.15.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/cis/LA-PCM.cis exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/cxgb3/t3b_psram-1.1.0.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/cxgb3/t3c_psram-1.1.0.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/e100/d101m_ucode.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/e100/d101s_ucode.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/e100/d102e_ucode.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/edgeport/boot.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/edgeport/boot2.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/edgeport/down.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/edgeport/down2.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/edgeport/down3.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi26/bitstream.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi26/firmware.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi26/loader.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi62/bitstream.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi62/loader.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi62/midi.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi62/spdif.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/ess/maestro3_assp_kernel.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/ess/maestro3_assp_minisrc.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/kaweth/new_code.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/kaweth/new_code_fix.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/kaweth/trigger_code.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/kaweth/trigger_code_fix.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/keyspan_pda/keyspan_pda.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/keyspan_pda/xircom_pgs.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/korg/k1212.dsp exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/mts_cdma.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/mts_edge.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/mts_gsm.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/ositech/Xilinx7OD.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/qlogic/1040.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/qlogic/12160.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/qlogic/1280.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/sun/cassini.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/tehuti/bdx.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/ti_3410.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/ti_5052.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/tigon/tg3.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/tigon/tg3_tso.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/tigon/tg3_tso5.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/whiteheat.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/whiteheat_loader.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/yamaha/ds1_ctrl.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/yamaha/ds1_dsp.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/yamaha/ds1e_ctrl.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/yamaha/yss225_registers.bin exists in filesystem
errors occurred, no packages were upgraded.

yunkwan wrote:
bangkok_manouel wrote:another option:
pacman -Rd kernel26-firmware && pacman -U kernel26-snapshot-2.6.31-rc6-git6-i686.pkg.tar.gz
after I run
pacman -Rd kernel26-firmware mkinitcpio
loading package data...
checking dependencies...
(1/1) checking for file conflicts [#####################]
100%
error: failed to prepare transaction (conflicting files)
kernel26-snapshot-2.6.31: /boot/System.map26 exists in filesystem
kernel26-snapshot-2.6.31: /boot/vmlinuz26 exists in filesystem
which pkg else should I remove?
your kernel. i'd recommend you to do that first:
cp /boot/System.map26 /boot/System.map26.old
cp /boot/vmlinuz26 /boot/vmlinuz26.old
in case of problem with your newly installed kernel, edit the grub entry at boot according to the new back-up names above.
then simply:
pacman -Uf kernel26-snapshot-2.6.31-rc6-git6-i686.pkg.tar.gz
also, why has mkinitcpio been removed? reinstall it before installing your new kernel.

Error "mzm.nvyhpxhw.pkg could not be extracted" when downloading bioshock from app store

Hi guys, I was trying to download bioshock the game from the app store and it gets about 75% through and then gets an error message "mzm.nvyhpxhw.pkg could not be extracted". I have tried many times and the same thing keeps on happening, what should I do?

Hi rjh6213
I am having the same problem with update of Motion 5 and FCPX yesterday got the same error invocation when starting to install although it dowloaded well.
This has nothing to do with developer's website since these two apps are solely Apple's yet the same or similar error occurs mine read like this......"The application could not be downloaded, an error occurred while running scripts from the package-----mzm.hfxomswf.pkg" this all has to do with the apple store that is full of bugs.
sometime it works, many times it does not work.
Thanks
AppleLou

Cal plsql pkg from Java concurrent program

Hi,
I try to execute one plsql pkg inside a java concurrent pgm.plsql code executed from view output i got the out put.Bt my status Shows ERROR.
this is my code
try{
System.out.println("transation type inside try block "+deptno);
CallableStatement cs=con.prepareCall("{call XX_ANE_DEPT2_PKG.XX_ANE_DEPT2_PRC(?,?,?)}");
cs.setString(1,null);
cs.setString(2,null);
cs.setString(3,deptno);
cs.execute();
con.commit();
cs.close();
//LF.writeln("Generating Programs for Application : " + transactionType, LogFile.STATEMENT);
//OF.writeln( " Available Concurrent Programs for Application " +transactionType );
catch(SQLException ex){
lRC.setCompletion(ReqCompletion.ERROR, ex.toString());
finally
pCpContext.releaseJDBCConnection();
I dont knw why the status is error any one pls help.If it is wrong method any one pls give a sample pgm to cal a PKG in concurrent pgm.
pls help
Edited by: aneeshmathew on Dec 28, 2010 4:49 AM
Edited by: aneeshmathew on Dec 28, 2010 4:49 AM

Are you able run this concurrent program from form application.? if it erroring out there what error you are getting.
Thanks

USER_LOCK PKG

Similar Messages

Maybe you are looking for