User logon alert

Hi,
i want to setup alert for folowing event:
Each user has one machine assigned like pc123, If user connect E-business suite application from another PC like pc980 , there should be alert sent to system/secuirty that user is logon from another machine as well as maintain history.
does any table stores machine name on daily basis? I know logon/logoff history is stored.
Thanks

i want to setup alert for folowing event:
Each user has one machine assigned like pc123, If user connect E-business suite application from another PC like pc980 , there should be alert sent to system/secuirty that user is logon from another machine as well as maintain history.
does any table stores machine name on daily basis? I know logon/logoff history is stored.No.
https://forums.oracle.com/forums/search.jspa?threadID=&q=IP+AND+Address+AND+Track&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=IP+AND+Address+AND+Terminal&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Terminal+AND+Monitor&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Similar Messages

Oracle 10.2.1.4.0: Getting alerts like User logon time is 4007.29 secs

Hi Team,
Im getting alerts like User logon time(msec) is 4007.29 secs & Session 291 is blocking other 13 sessions via OEM.
Im unable to find out the SID 291,to check which process has blocked the resources.
Please suggest us on above two quires.
Database : Oracle 10.2.1.4.0
Thanks in Advance!

Hello Anthony,
even maybe not on Windows (I faced this on Unix), proceed with invalid objects as in : Note 1453935 - Invalid DataPump objects after Windows patch collection > 25
this is the leftover of some previous 10g patching. Once objects are recreated, recompilation will go ok.
Regards,
Igor

User Logon Time (msec) Alert

Hi,
I'm getting User Logon Time (msec) Alerts, and the connections are slow!
Where can I go to see more about what is causing the slow logons?
Any log files?
I'm running 10.1 on Windows 2003
Thanks!
Gene

Sorry to pull an old thread, but I am having a similar problem.
Running 10.2.0.3 (single instance installed with dbconsole service) on windows 2003 x64.
I see this Alert after loggin in to OEM: User logon time is 2875 msecs.
Logon times for applications via sqlplus/sqlnet/odbc etc are fine, it's the OEM logon time that is very slow. All other logons are immediate.
It always takes 2-3 seconds at least (sometimes longer) to login to OEM, and it also most of the time takes as long to load the "home", "performance" tabs and even the administration & maintenance tabs sometimes.
It is very inconsistent, sometimes the "home" tab will load right away, but most of the time it will take 3-4 seconds to load.
I get the same problem when logging on to OEM from the localhost where the server is installed, and the same issue using Internet Explorer or Firefox.
Thanks for any help.

Hooking user logon activities programatically

Is there any way i can hook user logon activities programatically .
Like The ALockout.dll tool http://technet.microsoft.com/en-us/library/cc738772(v=ws.10).aspx
My goal is to find user logon activity which includes username,ipaddress(from which machine),processname

Hi,
AFAIK, there is no native windows tools or API's available. You can make use of alert services in event viewer.
If you want to monitor account lockouts in realtime, you can try 3rd part application like netwrix.
http://www.netwrix.com/account_lockout_examiner.html
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'

I want to grant permissions to all domain users to view reports on our Report Server. Domain users are able to access our Report Server URL and folder, but when they click on a report item they get an error message:
"Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'"
I'm using windows authentication and configured the local service account in SSReportS Config Manager as the credentials to connect to the Report Server DB.
Can someone please help how I should properly do this step by step to give all domain users permissions to view a report in SSRS?
Thanks much! - Rookie DBA

Hi IWAR,
The error message "Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'" means the user 'USER LOGON' does not have permissions to access the "ReportServer" database.
To fix this issue, please verify that the user has a valid database user login. For more details, please refer to the following steps.
In SQL Server Management Studio, open Object Explorer and expand the Databases folder.
Expand the database in which to create the new database user.
Right-click the Security folder, point to New, and then click User.
On the General page, enter a name for the new user in the User name box.
In the Login name box, enter the name of a SQL Server login to map to the database user.
Click OK.
Reference:
http://technet.microsoft.com/en-us/library/ms156468(v=sql.105).aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Apply the default user logon picture to all users

Hi
I applied gpo "apply the default user logon picture to all users"
Computer Configuration\Administrative Templates\Control Panel\User Accounts\Apply the default user logon picture to all users
C:\programdata\Microsoft\User Account Pictures\user.bmp --> renamed my company log to user.bmp.
Taken backup of old user.bmp.
But policy is not working.
Environment:
Windows Server 2008 R2
Clients:Windows 7 and Windows 8

Hi S.Vijay Kumar,
Based on my understanding, the GPO which configured the
Apply the default user logon picture to all users would not apply successfully. What’s more, you have customized the default user logon picture
%ProgramData%\Microsoft\User Account Pictures\user.bmp. Right?
Firstly, please check if the scope of this GPO and the setting of Filtering are correct.
Secondly, please follow the steps below to check if the GPO is applied to these Windows XP clients:
Click Start, type rsop.msc in the search box to access
Resultant set of policy.
Check if the GPO is applied to these clients and the setting of the GPO is correct.
In addition, it would be helpful for future troubleshooting if you could help to collect the following information:
Did the GPO fail to apply for all the computers or only some computers?
Can you set the user.bmp as the user logon picture
manually?
Regards,
Lany Zhang

How to read user - logon language (Urgent)

Hi All,
I have written the below code to display the language in english if it exists if not in french & so on, but i would like to know how i can read the language in which the user has logged on & use that as the first criteria.
Eg: S_SPRAS = User Logon language
SELECT SINGLE MAKTX FROM MAKT INTO Y_MAKTX
WHERE MATNR = MARC-MATNR
AND SPRAS IN (S_SPRAS,'EN','FR','IT',' ').
Hope my problem is clear, await inputs.
Vivek

Hi,
Let me try to explain the problem
Mtl-A, has description in 3 languages. (En, Fr, It)
Mtl-B, has description in 1 language only. (It)
Mtl-C, has no description
First i want to check for a given mtl if description exists in the user's logon lang, if it does not, then check if description is maintained in English, if not check in French, if not Italian.
Eg1: User logs-in with En language,
Then the description for mtl-A is displayed in english, for Mtl-b description is displayed in Italian (as only italian description is maintained) & for mtl-c no description is displayed as it is not maintained.
Eg2: User logs-in with It language.
Then description for Mtl-A & B is displayed in Italian & for mtl-c it is blank as no description exists
But when i use the below code, the system by default picks up EN which is my default lang, even if i login in French or Italian lang, the description is shown in english only.
SELECT SINGLE MAKTX FROM MAKT INTO Y_MAKTX
WHERE MATNR = MARC-MATNR
AND SPRAS IN (SY-LANGU, 'EN', 'FR', 'IT').
Hope i was able to put across my problem clearly.
Await inputs.

User logon history date and time details

Hi,
can any tell me the user logon history tables,
    as usr02 is only having the present log on details

use below Function module
CALL FUNCTION '<b>RSAU_READ_FILE</b>'.
it will solve your problem...
=====================================
Use BAPIS there are very useful BAPIS to get the user's info.
BAPI_USER_CHANGE               Change User
BAPI_USER_CLONE                Create User with Template in Another System
BAPI_USER_CREATE               Create a User
BAPI_USER_CREATE1              Create a User
BAPI_USER_DELETE               BAPI to Delete a User
BAPI_USER_DISPLAY              Display users
BAPI_USER_EXISTENCE_CHECK      Check a user exists
BAPI_USER_GET_DETAIL           Read User Details
BAPI_USER_LOCACTGROUPS_ASSIGN Change Activity Group Assignment for Dependent Systems from Central System
BAPI_USER_LOCACTGROUPS_DELETE Delete Activity Group Assignments in the Dependent Systems
BAPI_USER_LOCK                 Lock User
BAPI_USER_LOCPROFILES_ASSIGN   Change Profile Assignment for Dependent Systems from Central System
BAPI_USER_LOCPROFILES_DELETE   Delete Profile Assignments for Dependent Systems
BAPI_USER_PROFILES_ASSIGN      User: Assign profiles
BAPI_USER_PROFILES_DELETE      User: Delete All Profile Assignments
BAPI_USER_UNLOCK               Unlock user
===================================
U can see tables:
USR01 User master record (runtime data)
USR02 Logon data
USR03 User address data
USR05 User Master Parameter ID
USR12 User master authorization values
<b>Reward Points if it is useful..</b>
Thanks & Regards
ilesh 24x7

Powershell User logon script not Exiting With "Exit" scripts are set to be visible in GPO

I am trying to run this script as a user logon script and it is set to visible to the user. There are other parts of the script but It won't ever Exit. It works fine if I run it directly I only have the trouble when it is in the logon script. I'm thinking
of tryin "Kill -Id $PID" but I'm sure I'll get a bad return code.
Has anyone else experienced this or hav any ideas what I could try?
If (Test-Path U:){
Robocopy U:\ $Destination /E /move /XF "*.inf"
New-Item -Path HKCU:\Software\test\test -Name Test –Force
Else{
Exit
Else{
New-Item -Path HKCU:\Software\test\1 -Name Test1 –Force
Exit #here is where it will not stop!
Exit

Sorry, I did mention this was only a subset of the complete script.
So, what I am trying to accomplish in words.
1. Check for the existence of a certain folderon the c: Drive (that is created as apart of a different process)
2. Look to see if a registry key exisits that tells the script if it should run or not. So if certain registry key exists under HKCU then don't run if not continue.)
3. The first time a user logs in and does not find the value that the process is allready complete show the user a message box aski9ng them if they are ready to do (something) if not write a registry key saying step one has completed and then quit.
4. When the user logs in again the script looks to see if the process is complete and or if step one is complete, if step one is complete it allows the user to skip the process 2 more times but on the forth login forces the user to complete the process and
writes the final registry key that it is complete.
Like I say I have this all working correctly if I manually have the user run it. I just don't know why Exit is not being recognized when in the users login script processing of the script. I appreciate your reply and any direction you can point me to.

GPO Run these programs at user logon not taking effect when configured in Computer Configuration section

[EDIT 20140207]:
I found that the default domain policy sets "run these programs at user logon" and (other than I expected) not BOTH GPO settings become active, but the setting from the default domain policy overrides the setting from my new GPO. So I think I have
found the answer myself.
When on our W2k8-R2 DC I create a new GPO and configure
"Computer Configuration/Policies/Windows Settings/Administrative Templates/System/Logon/run these programs at user logon" to "c:\windows\system32\notepad.exe" (just for testing) it won't take effect on Win 7 SP1, no matter what the Security
Filtering options are.
It seems other settings (in the very same GPO) become active but "run these programs at user login" from the computer policies section doesn't. I configure the very same setting in the section "user policies" instead and add "Authenticated
Users" to Security Filtering, the program will be started. But that's not what I need.
I can reproduce the issue, here are the exact steps:
create a new group "group-a" for later security filtering
create a new GPO
in the new GPO set "Computer Configuration/Policies/Windows Settings/Administrative Templates/System/Logon/run these programs at user logon" to "c:\windows\system32\notepad.exe"
for setting the scope remove "authenticated users" from Security Filtering and add "group-a" instead
link the GPO to the domain root
make "test computer" a member of "group-a"
on "test computer" run "gpupdate /force", reboot, log in
Issue: notepad is not being started.
What I'm aiming for is obvious: Depending on the membership of group-a I want to configure certain programs that should be started whenever a user logs in.
gpresult /R returns that it would be applying the GPO. (It actually is but the setting "run these programs at user login" is not being applied.)
For debugging I started MMC / RSoP on one of the machines on which the GPO should have been applied and found that "run these programs at user login" is not set (which seems to be the reason why the GPO won't work on the machines).
Searching the web I found similar reports
[1] [2] but no solution was found and the user used a workaround instead.
If I change the GPO so that I use the very same setting in "user configuration" instead of "computer configuration" it works as long as I add "authenticated users" to the Security Filtering. But then the GPO is applied to all users
and not only to the ones using computers which are members of group-a. According to this howto [3] I should not remove "authenticated users" but alter the security setting instead. However, the howto seems to be aimed ad w2k3 and using Win2k8 I cannot
find security settings "apply" for "authenticated users" so I cannot remove that setting, there's only "read" or "read and modify".
So two questions:
1. Why doesn't it work when using "computer settings"
2. What about that Security Filtering with removing "authenticated users" and using group-a instead?
T.
[1] http://social.technet.microsoft.com/Forums/windows/en-US/0e280490-fba6-4ced-aba5-ae49c60e44bd/computer-gpo-run-these-programs-at-user-logon-not-working-as-intended-on-win7-clients?forum=w7itproinstall
[2] http://social.technet.microsoft.com/Forums/windows/en-US/8cb78bf8-33ec-461e-8604-32d82d016685/run-these-programs-at-user-logon?forum=winserverGP
[3] http://www.grouppolicy.biz/2010/05/how-to-apply-a-group-policy-object-to-individual-users-or-computer/

Hi,
sounds like you find the answer already.
If you have any further question, please feel free to let me know.
Have a nice day!
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Impact on roaming profile accounts if we Change User logon Name to Employee Number format in Active Directory for all User accounts

I want to understand if we change User logon Name to Employee Number format in Active Directory for all User accounts, then what would be the impact on existing profile. Whether we need to change it manualy or it will connect to same profiles in terminal
session.
As i observed it create new profile after logon name changed to employee number where existing users profile settings get fails to load and prompt for new settings (such as outlook reconfiguration, share drive mapping etc.).
Kindly let me know the proper process to overcome with this, how to connect same existing roaming profile with employee number format change.

Hi,
What if we change the user name of user account, will it have impact on roaming profiles.
Yes, it will affect roaming profiles. Please rename the roaming profile folder as the new user account name, in addition, change the profile path in ADUC.
Here is an related article below for you:
How to Rename a Windows 7 User Account and Related Profile Folder
http://social.technet.microsoft.com/wiki/contents/articles/19834.how-to-rename-a-windows-7-user-account-and-related-profile-folder.aspx
Best Regards,
Amy

How we Can find out How many Users Logon into the Portal those users Names.

Hi Friends
I have one doubt in Portal,
How we can find how many Users Logon into the Portal and how we can find that users Names in Portal.
Regards
Vijay Kalluri

Hello Vijay,
If you are at all interested in a 3rd party application to make your life a bit easier getting stats on your users, you could check out Click Stream by Sweetlets.
Click Stream uses the Usermanagement (UME) API to get more information about the user, groups, roles, LDAP attributes etc. and offers you the ability to filter this information in nearly any report at the click of a button.
Click Stream also uses the PCD API to get information about the pages your users are visiting too.
In the very near future Click Stream will also have iView recording to monitor iViews, telling which iViews have been clicked, etc.
Here are some reviews on the SAP EcoHub from people who have used it: http://ecohub.sdn.sap.com/irj/ecohub/solutions/clickstream
Please just let me know if you have any question or if you are open to test drive Click Stream. We will certainly help as best as we can.
Good luck.

Portal users logon average

Hi,
I would like to know if there is a way to find out how many users were logged on to portal yesterday or the users logon average. Anything that could show what is the time when most of the users are on the portal.
Really appreciate your help.
Thanks,

You will get user ids also.
Check all the alternatives in the portal activity report iview
open the portal activity report as object
and in type of report
check the option 'Details of users who logged on' and give the time period
Check the below help link for more information
Creating portal activity report iviews
http://help.sap.com/saphelp_nw04s/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
About Portal Activity Reports
http://help.sap.com/saphelp_nw04s/helpdata/en/58/728ea01cf64fff996b827f2a06f9b1/frameset.htm
Raghu

Last three user logon date and time

Hi Everybody,
I would like to find out last few user logon details of an user. Where can I get this information if ST01 trace is not turn on? Table USR02 only shows the last logon that is insufficient.
Thanks!

You can use the dynamic audit logs in SM19 to record a successfull logon event for a single or all users.
If you want the information readily available, you can activate parameter rsau/enable and set static filters.
If it is too late for this, then you would need to look in the application statistics (ST03N in Expert Mode) to get the information.

User-defined alert based on Top Activity screen?

Does anyone know the query used to populate the Top Activity screen in Grid Control? I want to make a user-defined alert that will page me if the Top Activity is over a certain amount.

Hi Bishal,
Rather than using an alert, you could put validation code in the SBO_SP_TransactionNotification stored procedure to check for the same job number before the document is added. This is a permitted solution as SAP allow users to add their own sql code to this proc (provided it's not inserting or updating data in SBO system tables).
To set up this solution (on a test system):
1) Open SQL Studio Management
2) In the Object Explorer expand the company database, expand Programmability and Stored Procedures
3) Right-click the SBO_SP_TransactionNotification stored procedure and choose Modify. This will create an update script in the main window.
4) Look for the following section in the script:
--     ADD     YOUR     CODE     HERE
5) Underneath the above section, paste the following code:
if @OBJECT_TYPE = '17' and @TRANSACTION_TYPE in ('U', 'A')
     if exists(select DocEntry from ORDR where DocEntry <> cast(@LIST_OF_COLS_VAL_TAB_DEL as int)
                    and U_Jobnumber is not null and U_Jobnumber <> ''
                    and U_Jobnumber = (select U_Jobnumber from ORDR where DocEntry = cast(@LIST_OF_COLS_VAL_TAB_DEL as int)) )
          begin
               set @ERROR = '9999' -- Set your own error code here
               set @ERROR_MESSAGE = 'The Job Number entered has already been used on a previous sales order.'
          end
6) Click on Execute and you should get a message stating that the update was successful
7) Test adding a new sales order
The above script will raise an error when the user clicks on Add if a job number has been specified on the sales order and that number has already been used. It will not check if a job number has not been specified
Kind Regards,
Owen

User logon alert

Similar Messages

Maybe you are looking for