User manual very very awsome regarding configurati...

Internet access points
WAP configurations
MMS configurations
Settings in the "web" section
Settings in the "messages" section
and some more
their's usage and overview - the user manual is bad regarding these topics!
Any good and detailed description available to get overview and better understanding how these setting work,
how they depend from each other, how are dependencies to client applications?
nokia 3120 classic, fw V 10.00 06-03-09, RM365

All the settings vary from provider to provider, which is why there is nothing in the manual. It is your provider's responsibility to send you the correct settings for these.
There can be no generic set up for these, and the manuals are made for generic instructions applicable for all units. Instructions for vodaphone setup for example will not work on a phone in the t-mobile network.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Similar Messages

  • Random users getting very slow response when opening messages/attachments or sending email

    I have a small number of users, mostly very senior management of course, who are experiencing slow response when trying to open email messages and attachments or send messages.
    They see the spinning wheel and sit there until it decides to open or send. If the message is opened  and closed again you would expect it to be quick reopening the same message, no, it does the same thing again.
    These users are all using Outlook 2010 and their mail accounts are on Exchange 2013. It does not seem to make a difference if they use a physical machine or log into a VDI.
    I do not have the same issue generally, though I have experienced this when using VDI and this has been seen using a number of different machine pools so it is not a specific pool.
    This is not specifically a VDI issue, as the 3rd paragraph says, the issues are seen on both physical and virtual machines.
    none of the mailboxes are particularly large, most are at around 60% of quota limit, and the same limit applies to almost all mailboxes across the organization. They also do not appear to have a huge number of messages stored, other users without issues
    have larger mailboxes and higher item counts. Any ideas what I need to look at to address this?

    Hi,
    How about OWA?
    If OWA works well, it seems an issue on the Outlook client side.
    Please try to run Outlook under safe mode and re-create profile for testing.
    Any related error/warning/information message left in App Log?
    Also consider the network Bandwidth.
    Thanks
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • I am a new CC user. Very satisfied.  I just d/l the CC 2014 upgrades.  now I have 2 sets of folders.  Can I uninstall the older version. or do I have to leave it on this machine ?

    I am a new CC user. Very satisfied.  I just d/l the CC 2014 upgrades.  now I have 2 sets of folders.  Can I uninstall the older version. or do I have to leave it on this machine ?

    Understand the uninstall process BUT ...
    Looking at the size of the previous versions vs. the CC 2014 versions, it seems that these newer (2014) versions are smaller in size ... with the exception of SpeedGrade.
    What I have installed so far:
    AE CC = 2.66gb
    AE CC 2014 = 2.03gb
    AU CC = 900mb
    AU CC 2014 = 678mb
    AI CC = 1.81gb
    AI CC 2014 = 907mb
    PS CC = 3.79gb
    PS CC 2014 = 1.99gb
    PR CC = 3.87gb
    PR CC 2014 = 1.54gb
    SG CC = 206mb
    SG CC 2014 = 709mb
    I hope this is right and the downloads didn't leave out anything!! If the programs are lighter, that's a good thing.
    So, is this right?!
    And is it alright to Uninstall the previous versions? (I don't have any plugins, add-on's, etc...)

  • Warehouse Management User Manuals

    Dear Friends,
    Can you please forward me some user manuals for Warehouse management.. urgently needed for training purposes ?
    I will be very grateful.
    thnks
    nandu

    Hi Nandu
    Please refer this link attached and all the branches under this tree structure. This should give you almost everything in Warehouse Management "
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f8386f4afa11d182b90000e829fbfe/frameset.htm
    Hope you find this worthful
    Regards
    Vinayak.M.G.

  • User Manual for PS

    Dear All
    I require User Manual for PS, can you please send me on this daani_8@ hotmail.com
    waiting for your positive and urgent repose

    Hi everybody,
    Link: http://help.sap.com/
    Path: SAP Best Practices --> Baseline Packages --> Based on SAP ECC 5.00 --> Select Country: for eg, Localized for India --> Technical Information --> Building Blocks --> Select Country for eg, India -->
    Topic: J12 - Project System
    Here you will get both Configuration guide & Development master list
    Also kindly visit following link
    http://www.sapprojectsystem.com/
    You will get all relevant stuff.
    Beside this I have sent you few docs on PS which can be very useful.
    Hope this helps.
    Regards
    Tushar
    PS : Reward points if you find answer useful.

  • Premier Elements 11 User Manual

    Is there a user manual available for Premier Elements 11?
    I have already downloaded the Help and Tutorials PDF file, which does give some help but not enough for someone who has not used Premier Elements before.
    I am looking for a proper user manual that includes an index and contains all the instructions to operate the software. Some people may call this a reference manual. This makes it easy to find how to do things with the software when you are an inexperienced user.
    I know it is the fashion these days not to include a printed user manual with software, but at least there should be a PDF version included on the software disks or available on the support site.
    Maybe Adobe think that Premier Elements 11 does not require a user manual because it is supposed (!!!!) to be easy to operate. Sorry I totally disagree and what is available on the help website is not sufficient.
    Regards
    Peter

    Peter,
    I agree that with Steve's book in print (there is at least one more, that is good, though I do not know if the Missing Manual series has been updated for PrE 11), it would seem like a great promotion on Adobe's part.
    However, Adobe has moved completely away from any printed manuals, and have opted for an online Help system. The good point of such a delivery is that Adobe can instantly make changes to the Help file, when perhaps an update changes things, or errors are discovered. Once, way back in the dark ages of personal computers, I had WordPerfect 1.0.x (by WordPerfect, Orem, UT). It had a lovely ring-bound manual. About once per quarter, WordPerfect sent me new pages for it, to either replace existing ones, or add to the manual, as changes/corrections were necessary. There was no Internet then, or even FAX machines. Things moved by "snail-mail," so were slow. Still, the manual is beautifully printed (all screen-caps, and illustrations) are done with a gloss varnish, that made them look almost 3D. Besides that one, I still have all of my manuals for Photoshop, Illustrator, PageMaker, Premiere Pro, After Effects, InDesign, and the rest. I just love books.
    I find that Help files have two limitations. First, the user needs to know the exact term, when Searching, and a new user will be ill-equipped to know those terms, and it really takes two computers to have the Program fully opened, with the Help file displayed - even my dual 21" monitors get crowded, and there is a lot of clicking on various windows, to do the work, while reading the Help file. Still, the online Help is the way of the future, and almost everyone is doing similar. Guess that it's time for me to get with it, and move into 2013?
    I have gifted several copies of PrE, and before I knew of Steve's books, I included the Missing Manual book, and then Steve's books, with the gift. The recipients really appreciated the "manuals," along with the programs.
    Now, one learning resource, that has not been mentioned in this thread, is this very forum. Back when I started, there were no forums, as there was not then an Internet. It took several generations of programs, before there were any news groups on the NNTP - those did not come about for a couple of years. Along with those copies of PrE, I also put the URL for this forum in the card, and urge the recipients to stop by for a good read, or with any problems. When it comes to forum support, Adobe does one of the better jobs, and we greatly appreciate their efforts to keep these forums going, and as powerful, as they are.
    Good luck,
    Hunt

  • Photoshop Elements 5.0 User Manual

    I would appreciate it if someone could tell me how to download a copy of the photoshop elements 5.0 user manual? I tried to get this from the website and searched forever to no avial.
    Plse and thanks very much!

    It's on the CD -- do you no longer that that?

  • End User Manual

    Hi SAP Gurus,
    We are currently want to create the end user manual for the users at client.
    I want to know what are the different  details that should be maintained in the End User Training Manual.
    Should we enter screen shots and any question answer  in the same.
    If any one has the template , can mail me at [email protected]
    Also What is the concept Power User.?
    Edited by: Kapil Joshi on Dec 27, 2007 7:27 PM

    Hi Kapil,
    You can use Info Pack for the documentation in that you just key in the data for the various transation and system capture all the screen shots as well as Path T codes and Settings to be entered it is very good tool.
    Once you have that you can start from SPRO with Enterprise structure and all modules seprately and can prepare the documents.
    Power Users are Super Users who have the authorisation for Modify, Update and Input and some timeCustomise also.
    Cheers!!
    Biren Agnihotri
    Every customisation is diffrent from another so a standard template will not be of any help.

  • User manual in PDF for AcrobatPro8 - where to find it?

    I tried to print the Help of AcrobatPro8 however could not find an option to print whole manual as it is, for example, with Illustrator where you can get the whole manual in a neat PDF format.
    The only way to print anything from the very large Help menu, apparently is to print page by page.
    The question:
    Is there any website or link where I can download the  user manual for  AcrobatPro8   in PDF ?
    Thanks for any tip

    The online Resource page for Acrobat 8 provides additional links and more detailed information, http://help.adobe.com/en_US/Acrobat/8.0/Professional/.

  • Motion 3 user manual hard copy

    Is there a hardcopy available of Motion 3 User Manual?

    I till cost you $50-$300 to get it printed at Kinko's or Office Depot.
    Use full size paper, don't try to scrimp by using half sheets. The illustrations and captions go all to heck when scaled down.
    Print both sides, punch for 3-ring binder.
    Call around to find the best printing deal but I do not recommend trying to print it yourself unless you have access to a very fast laser that will duplex.
    bogiesan

  • User manual for JES Calendar

    Is there a user manual for JES Calendar 6.0? The help is not very helpful.
    Thanks in advance.
    Klara

    Here's where you can find all manuals about portable computers.
    http://support.apple.com/manuals/#portablecomputers
    UPDATE:
    http://manuals.info.apple.com/en_US/macbook_pro-retina-mid-2012-important_produc t_info.pdf
    http://manuals.info.apple.com/en_US/MacBook_Pro_Retina_QuickStart.pdf

  • No pdf User Manual?? (Not!)

    It seems that the A3 user manual is only accessible through the Aperture Help menu. I find this very frustrating - I commonly like to read such things in Preview, or even on my iPhone. In fact, one of the big reasons I am interested in an iPad is to read software documentation. Logic 8 came with a printed manual. Logic 9 came with "Exploring Logic" printed, and a pdf User Manual.
    Aha! I just found a link to a pdf manual at http://documentation.apple.com/en/aperture/. I was confused because I expected to find it on the page http://support.apple.com/manuals/#aperture. I still think that it should listed there, too. Anyway, I have it now - it much shorter than the Logic Pro manual - only 900 pages!
    Message was edited by: Stephen Wandzura1

    Thanks for your interest in Adobe Ideas.  While there is no PDF User Manual for the application, you can find information on Adobe Ideas at: http://bit.ly/IdeasTips
    Please take a look and let us know if this answers some of your questions or feel free to post any direct asks to this Forum and we will work to provide a response.
    Thanks,
    Kim
    Adobe Ideas Team

  • Tecra 520 cdt - need user manual

    I have just been given a tecra 520 cdt laptop.
    I was wondering if anyone has a instruction manual or any info about this laptop - this is my 1st laptop i have ever owned.
    Thanks very much

    Hi,
    you can download a user manual here:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_manuals.jsp?service=EU
    Select Archive, Tecra-Archive...
    Bye

  • "Scale to sequence" missing in Modify, yet users manual says it is there

    I want to enlarge a photo imported into FCE from Iphoto and can't figure out how to do it. The Users Manual that comes with FCE on page 763 says to go to Modify then Scale to Sequence, but there is no such command in Modify.
    I see that Tom Wolsky says there is no such command available in FCE, then why is it in the Manual?
    Very frustrating.
    Anyway, is there a way to enlarge an imported photo either in Timeline, Viewer, or Browser?
    All help is appreciated.

    When the images are in the sequence select them and use remove attributes Cmd-Opt-V. Check basic motion to reset the scale. You can also open individual items into the Viewer and reset he scale in the Motion tab.

  • User manual for reading on the ipod

    Does anyone know how to place this on the ipod classic as a note for use "on the go". It would be very useful to be able to consult the user manual directly from the ipod,
    http://manuals.info.apple.com/enUS/iPod_classic_FeaturesGuide.pdf

    You can only put plain text files as notes on the iPod. So you will have to copy/paste the content of the PDF into a word processor app and Save As text (.txt). Here is an Apple article with instructions.
    http://support.apple.com/kb/HT2234
    This means that any diagrams and images in the document will not survive the conversion.

Maybe you are looking for

  • WHEN I LOGIN AS DIFFERENT USER, IT TAKES ME TO THE SAME PAGE WHERE THE PREV

    Hu Gurus, I log in to portal as user1 and go to a page and then log out of the portal. Then I try to login as user2, it takes me to the same page where the previous user was. It looks like it caches the page information. How can I avoid this. Please

  • Reader XI still gives "insufficient data for image" error

    Our fax machine creates .pdf files of the faxes and recently our back office has had trouble printing them. When I look at them they give an "insufficient data for image" error, but only on one page each. I've tried upgrading to reader XI but the pro

  • Default value for date

    Hi experts, I want to set default value for dates.. My screen has : date_from & date_to. date_to : will be current date(today's date) if Eg: 27.08.2007 (here i used NOW()) then date_from must be 01.06.2007 (3 months logic) similarly : if date_to is 0

  • Very simple question about DBMS_SCHEDULER jobs

    Hi, I have a scheduled job and its repeat interval is every 30 min for all hours. And also assume that my job is started at 11 am but it couldnt be completed till 11.30 am and it is finished at 11.45 am. What will be the scheduled execution on 11.30

  • Windows Media File error 2048

    Anyone know how to convert a Windows Media file to run on Quicktime? I get a message that say's Error 2048 and that it's not a movie file.... Thanks.