User Mapping not fully Available Error

Hi
while connecting from EP to Sap R/3
created folder in System Administration and System object as Dedicated
system name: sapsystem - next - finish
selected propety category :Connector
AppHost : 101.110.110.105
Remote Host : 3
SAP Client : 800
SAP SYstem name : global
SAP SYstem ID : 00
SAP Server Port : 3200
System TYpe : SAP_R3
SAVE
Property Category : usermanagement
logon method - UIDPW
user mapping type - admin,user
SAVE
System alias as (sys1)
User Administration - UserMapping- search
Administrator in Users - start - edit-
System alias - sys1
user - sapuser i.e( R/3 server)
password - xyzabc
SAVE
then raising error Portal Runtime error
User Mapping not fully Available
with Exception id
Regards
Rakesh

Hi,
First you must import sap crptographic toolkit from help.sap.com, following link: http://help.sap.com/saphelp_nw2004s/helpdata/en/04/d246215f1d4f588d1d9c49391acb01/frameset.htm
Here be careful to follow all the steps, have a look at the link and the subt topic deploying crptographic toolkit.
Onec you have done that, restart the portal and related services.
Now it is possible that you might face other new probles or exceptions.
In that case you might need to update your jce files etc.
Please refer to the sap note: 796540
in that case

Similar Messages

"User Mapping not fully available" error in EP6 SP9

Hi,
I am trying to set up a user mapping in EP6 SP9
I have created a system (usig the "Dedicated Application Server for R/3 System" template, not sure if that is correct but I didn't think it would matter),
and an alias and everything seems fine until I try and create the mapping itself
In the "User mapping" window I click edit of the user I want to map, that works
I then type in a username and password (and domain since I have added that property)
When I press "Save" I get the error below
Anyone know what might be wrong?
Vin
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 02:20_07/01/05_0006_31293550
See the details for the exception ID in the log file

Hi Vincent,
I installed the SP9 preview yesterday and had exactly the same problem. However I think I found a solution. Try the following:
In your portal go to 'System Administration' -> 'System Configuration' -> 'UM Configuration' -> 'Direct Editing'.
There locate the parameter 'ume.usermapping.unsecure', set it to 'TRUE' and restart your server.
Hope this works for you as well!!
Best regards,
Markus

User Mapping not fully available

Hi, each time i want to do a user mapping i have the following error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 09:43_09/11/04_0002_1358150
See the details for the exception ID in the log file
This is the message i have found at the server log:
#1.5#0008541F9918004D0000006E00000CF80003E872B1EAA51E#1100004239000#/System/Server#sap.com/irj#com.sap.portal.portal#Administrator#281####f126dea0324c11d98bd10008541f9918#PRT-Async 0##0#0#Error#1#com.sap.portal.portal#Java###Exception ID:09:43_09/11/04_0002_1358150
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component class : com.sapportals.portal.prt.component.usermanagement.UserMappingAdminComponent
User : Administrator
     at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:376)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:389)
     at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
     at java.lang.Thread.run(Thread.java:534)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: PortalComponentException
     at com.sapportals.portal.prt.component.usermanagement.UserMappingAdminComponent.doHandleHTMLBEvent(UserMappingAdminComponent.java:408)
     at com.sapportals.portal.prt.component.usermanagement.UserMappingAdminComponent.doContent(UserMappingAdminComponent.java:137)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     ... 7 more
Caused by: com.sap.security.api.umap.UserMappingNotAvailableException: User Mapping not fully available.
     at com.sap.security.core.umap.imp.UserMappingDataImp.storeLogonData(UserMappingDataImp.java:545)
     at com.sapportals.portal.prt.component.usermanagement.UserMappingDataModel.saveLogonData(UserMappingDataModel.java:508)
     at com.sapportals.portal.prt.component.usermanagement.UserMappingAdminDataModel.saveLogonData(UserMappingAdminDataModel.java:179)
     at com.sapportals.portal.prt.component.usermanagement.UserMappingComponent.doHandleHTMLBEventSave(UserMappingComponent.java:157)
     at com.sapportals.portal.prt.component.usermanagement.UserMappingAdminComponent.doHandleHTMLBEvent(UserMappingAdminComponent.java:231)
     ... 11 more
I have redeployed com.sap.security.usermapping.par.sda but nothing happens.
Someone knows how to solve this problem?
Thanks

Hello Pablo,
Do you know where I can download the "SAP JAVA Cryptographic Toolkit"?
I've tried to download it from service.sap.com/download under-> "Download SAP Cryptographic Software" but it seems that it's not in there.
Thanks in advanced,
Kobi.

User mapping not available

Hi all,
I have installed EP SR1 . I am trying to map a system to a role. When i try to user mapping it asks for username ,pwd for the system.
When i enter it and save it ,its throwing the following error.
Any patches ?
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 02:31_12/07/05_0006_4483250
See the details for the exception ID in the log file
Regards
Bharathwaj

Hi,
User Mapping, we have to install encryption packages, if you are not concerned abt security, one work around is
goto System Config->UM Config-> Select Direct Editing Tab and change this valuefrom FALSE to TRUE.
#Use usermapping without strong cryptography (IAIK). It is strongly recommended to keep the default value (FALSE). Only change this setting, if you cannot install a cryptography provider due to import and export regulations. Then, if this property is set to TRUE, the usermapping information will not be encrypted.
(Type: Boolean, Default: 'FALSE')
ume.usermapping.unsecure=TRUE
You can refer to this link,
/community [original link is broken]
I would recommend you to install the encryption packages.
If it helps and works and if you are happy with the solution,reward points.
Thanks
Senthil

File System Repository - User Mapping not Working

Hi,
I tried to integrate a file system into KM. For doing so, I followed the guide located at [http://help.sap.com/saphelp_nw04/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm].
The only problem is, tht the user mapping doesn't seem to work...
The portal is running on a UNIX system, whereas the file share to be integrated is running on a Windows 2003 Server.
Here are the single steps that I performed:
- Creation of a KM Windows System in the system landscape directory with the ID "MySystem". User Mapping is set to "User,Admin"
- Creation of a Windows System in the system landscpe of the KM with the ID "MySystem"
- Creation of a Network Path in KM with following settings:
jCIFS Protocol is activated; Network Path = "
My Server\My Share"; User = "My Windows Domain\My User" and the according password. The specified user has administration permissions on the server.
- Creation of a readonly File System Repository Manager with following settings:
Root-Directory = "
My Server\My Share", SecurityManager = W2kSecurityManager, ACL Manager Cache = ca_rsrc_acl, Windows Landscape System = "MySystem"
- Configuration of the W2KSecurityManager: I specified the DomainFile-setting as "/etc/companydomaincontrollers.txt"
and placed such a file in the KM with following setting: "My.Server.Domain=According IP Adress"
- In UME I carried out user mapping for index_service user and placed the above mentioned admin user into the user mapping.
Result: The indexing works fine, all fles are indexed. When I however try to carry out a user mapping for a "normal" portal user in the UME it doesn't work: The portal user has no access to the file system. (I used the same admin user for mapping... so it should work).
Any help is appreciated...
P.S. With portal super admin users I can however access the fle system repository, even without user mapping. But I think this is ok, because I read in one forum message that admin users have always access in general....

>
Frank Friedrich wrote:
> Hi Clemens,
>
> so the good think is that indexing is working and you can navigate with your admin portal user through the file system repository. In this case the most configuration settings must be correct.
>
> I am not quite sure regarding your System objects with the ID "MySystem". Do you have as well define an Alias Name for this System Object with the same name "MySystem" ? As well upper and lower letters are important.
>
> Because the reference is all the time the Alias name and not the ID or Name of your System object.
>
> Best regards
> Frank
Hi Frank,
thanks for your reply.
I have as well definied an Alias Name with exactly the same id. So this gives us following:
System landscape directory: KM Windows System with id="MySystem" and Alias="MySystem"
KM System Landscape: Windows System with id="MySystem"
In the created file system repository manager I also set "MySystem" for the Windows Landscape System parameter.
So I think that this should be correct (I also considered upper- and lowercase letters).
Maybe the probem lies in specifying the domain names? When I applied user mapping I always additionally specified the Windows domain name of the users, which is correct I think.
In the security manager configuration for the domain controllers (-> [http://help.sap.com/saphelp_nw04s/helpdata/en/a9/c54e9e09448d46b73d154e93d5e995/content.htm]) I however mapped the network domain of the file share server to the according IP adress. Maybe this is wrong?

"User is not setup correctly" error message in iStore

Hi
I am getting a strange error message when I log into iStore using the iStore Administrator responsibility. I navigate to Catalog > Products, I select a product and press "Update". As soon as I do this, I get this exact error message "User is not setup correctly. Please check user setup"
This has been a hard one to figure out, everything seems to be set up properly, anyone have any clues as to what the problem is here?
thanks!

hi,
pl import the resource in resource manager..
then u check , probably it should work !
regards
varma

Google map not fully drawing

this is happening more and more frequently: google map isn't fully drawing a map for a given area. This is happening in both wi-fi and 3G contexts.
Any ideas?

When I've experienced that, it was usually due to carrier problems with cellular data that resolved themselves with the next tower or within a day or two. I've not experienced it using wifi.
Try shutting down the Maps app...
Double tap the home button to bring up the Recents List
Tap and hold any icon
Press the red to delete the Maps app
Press the home twice button when done.
If still a problem, try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

User can not login? Error comes up - only happens on mac pro

Hi. I have just set up a server system and users can login fine on all the imacs. However, When a user comes to login on a mac pro, they get this message:
The home folder of this user account is on a afp or smb server. Please contact the system administrator. This happens as soon as they press login.
We are running Mac OSX SERVER 10.4.10
Thanks,

Hi
On the MacPro what is in the DNS Servers field in Network Preferences? Compare what is there with what is in the same area on the iMacs that can successfully log in. Where are they getting their IP addresses from?
Tony

Portal Runtime Error while performing User Mapping to SAP SRM

Please find below the error I received while User Mapping from Enterprise Portal to SAP SRM :
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 04:21_23/06/05_0073_8097650
See the details for the exception ID in the log file

Hi,
yes, Karsten is correct. Just some background:
"User Mapping not fully available.." finally means that user mapping is configured to use strong encryption, but the main crypto key for user mapping is missing. Usually, that's because "SAP Java Cryptographic Toolkit" and/or "JCE policy files for unlimited strength encryption" are not installed (or the server hasn't be restarted afterwards). The note will most likely help
Best regards
Heiko

Error while creating the user mapping

hi friends i was gettig this error while editing the logon data in user mapping.
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 12:54_19/02/07_0002_9709050
See the details for the exception ID in the log file

Hi Rajesh,
Navigate to User Administration---->User Mapping
Under Search, Search for your user id in users.
You will get ID, Name with Edit Link and by the side "System" Drop Down Box which contains the name of the system Aliases that u created.
Click on Edit Link, It will ask for user and password. Give the user and password for R/3 System and clicked save. After this you will get an info like, Logon Data Saved.
******Hope this helps you. Reward Points if you find this helpful.
Regards,
Eben. J

Error in User Mapping with SR1 Package

Hi
I have installed the SR1 Package for Web AS and EP.
While trying to achieve User Mapping the following error is being displayed
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 02:08_12/07/05_0005_4483250
Has anyone come across with this problem?
Also the 'Personalize' link on the Portal is not working.
I have come across the same problem on two machines in which the SR1 package has been installed.
Please respond if there is a solution.
Thanks in advance.
Regards
Priya

Hi Priya,
I'm glad to hear that you have solved your problem on your own, but not so glad to see that you did not check the mentioned links! ;-(
If you would have, then you would have seen that you've done exactly what I mentioned in that thread. But more important, that this is the easiest way to solve the problem but not at all the safest and therefor NOT RECOMMENDED by SAP. I would also rather suggest to solve this problem by installing and using the unlimited strength jurisdiction policy files from Sun Microsystems, Inc.
Maybe you take your time and read the Note and the mentioned links so that you're informed about the security risks.
Regards,
Robert

Portal Runtime Error - User Mapping

Hi
I installed EP6 SP9, KMC and TREX successfully. I logged into the portal and created a system to connect to R3 and also the system alias. When I tried to do the user mapping I get the following error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 12:06_31/03/05_0003_3886350
See the details for the exception ID in the log file
Please help.
Sriram

This was also discussed several days ago in this forum - please search the forum before posting.
Did you install the strong encryption libraries? Without those libraries then usermapping cannot be stored securly in the DB and thus you see the error - by default ume.usermapping.unsecure is set to false, for VERY GOOD REASON. If you allow unsecure usermapping the the user/pwd data is stored in BASE64 strings in the DB - this is hardly secure.
Only set ume.usermapping.unsecure to true in non-productive environments.
Nick

User Mapping runtime error

Hi
i am implementing the user mapping concept in the Portal.
actually i need to map the R3 system from the portal.
for that i have created one system named as R3 thru system administrator as mentioned in the document sucessfully. after creating the R3 system i have come back to User Administration -> user mapping-> in that user mapping automatically i got the system in the drop downlist box. so i had choose it as R3 and when i am going to enter the user name and password then i click the save button....i am getting the portal runtime error .....what is the problem of this...
i have strucked at this point.......
see the following errors.......
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 10:57_23/01/07_0009_3263850
See the details for the exception ID in the log file
regards
suresh babu

Hi suresh babu,
Try the following:
System Administration -> System configuration -> UM Configuration -> Direct Editing
set the parameter 'ume.usermapping.unsecure' to TRUE and restart your server.
Hope it helps
Omri

User mapping exception

Hi,
I am getting the following exception while doing user mapping for backend R/3 system.
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 06:35_02/04/99_0009_8998850
See the details for the exception ID in the log file
Can anyone please let me know how to solve this problem.
Points will be rewarded.
Kind regards,
Raj.

Hi,
I guess your portal installation has its Cryptographic Level set to weak. In this case, User mapping will not be available. So you need to change a property value. Follow the steps given below:
Go to System Administration -> System Configuration -> UM Configuration.
Go to the Direct Editing tab.
In the text box there, you will find a property ume.usermapping.unsecure.
Change the value from FALSE to TRUE.
Restart the server and try.
Be aware that this causes an unsecure transmission of user mapping details between the portal and backend system.
Hope this helps you.
Regards
Ranjith

User Mapping Issue

I get the following error message when mapping a user
User Mapping not fully available..
Exception id: 10:25_16/02/06_0015_35280350
See the details for the exception ID in the log file
Any ideas?

Hi,
maybe some background info would be interesting to know:
User mapping is not fully available by default, because SAP does not ship cryptographic libraries with the product (for legal reasons). If these are not present, the stored passwords cannot be encrypted in the portal database.
A workaround would be to tell EP to store the passwords unencrypted. For this, set the parameter as Juan suggested.
A better approach imho would be to install the required security libraries (SAP Java Cryptographic Toolkit) for having craptography support on the system. The libraries are available on service marketplace.
Regards,
Dominik

User Mapping not fully Available Error

Similar Messages

Maybe you are looking for