User-maxlinks bug

I am seeing a curious bug concerning maxlinks and currlinks.
In my dialin router, I have several users defined locally. Each username is allowed to use ppp multilink, and I have also defined a maxlinks in the username command:
<b>
username xxxx user-maxlinks 2 secret ...
</b>
Sometimes, I find that users cannot add a second link to their bundle. If I debug dialer events, I see that currlinks=2, maxlinks=2, so the new call is rejected. But the user has only one link up.
This looks like a bug in the router's running count of currlinks. I have the impression that sometimes when a call gets cleared, the currlinks gets decremented against the wrong username, or something like that. My evidence is two debug messages:
Se1/0:2: Dialer-peruser: Decremented user yyyy's currlinks, currlinks=0 maxlinks=2
Se1/0:1: Dialer-peruser: User yyyy's dialerperuser structure freed already
Serial1/0:1: Dialer-peruser: failure decrementing currlinks during mlp_remove_link
Maybe the error message above occurs because the bundle can be dialout as well as dialin. Is is possible that currlinks gets incremented on dial in, but not on dial out, but decremented when both types of call get cleared? Certainly the pattern for the case above was for a user that was allowed 4 links. I dialed out one channel, then he added another two to the ML bundle.
Maybe we are dealing with two different bugs here?
Anyone else seen this?
Kevin Dorrell
Luxembourg

Whether I persue it or not will depend on how much pain it gives me, how easy it is to demonstrate, and whether my time is better spent doing other work like learning in the lab or on NetPro.
This bug actually is likely to give quite a lot of pain in the long term, because it will limit the capacity of the dialins over time. But there is a workaround, which is not to limit the number of links.
The real reason for exposing the bug here is to see if anyone else has noticed it, and help me characterize it. When presenting a bug to Cisco, if you can present a repeatable set of conditions that produce it, then they are more likely to take notice.
Characterizing the bug also makes it easier to test if it has been fixed in the next release. I think this one should be quite easy to reproduce. It just needs a bit of detective work, which is presicely the sort of work I really enjoy!
Kevin Dorrell
Luxembourg

Similar Messages

User Interface bug when renaming tracks in list views

When renaming tracks in the list views, there is a user interface bug that makes it impossible to see what you're doing. When you select a track in the list view, this is what it looks like:
Note how the text is white on the darker blue background. When you click again, to open the inline text editor to rename, this is what you get:
The background color of the text editor is white, just like the text, so when you type, you can't see what you're typing, nor can you see where in the original text your text insertion cursor is located.
Thanks!
Steve.

I'm frustrated with this same problem. In my case this happens only in my 10.5 macbook air and not in my 10.4 macbook pro. I've been renaming files in the same way in 10.2/10.3 and this never happened. Should be a bug. I've been searching for this issue and found this post at last - I really wonder why there aren't so many people mentioning this.

Event Handler/Create User Event bug

This is a problem I've run into a few times on my system (Win2k) so I finally went back and reproduced it step by step since it wasn't too hard. It causes LabVIEW to crash and exit without saving.
- Create an Event Handler
- Place 'Register Events', wire output to dynamic event terminal
- Place 'Create User Event', wire output to 'Register Events'/User Event
- Place an Empty String Constant [""], wire to input of 'Create User Event'
- Set empty string property -> Visible Items > Label = True
- Rename label from "Empty String Constant" to other such as "Event"
OR
- Create a cluster constant with something in it
OR
- Place a boolean constant
- Set boolean property -> Visible Items > Label = True
- Name label something su
ch as "Event"
- 'Add Event Case...' to the Event Handler, select Dynamic / : User Event
- Delete the constant wired to 'Create User Event'.
- Place a constant of a different data type and wire it to the input of 'Create User Event'
LabVIEW immediately disappears (all changes are lost) and this error is displayed:
================================
LabVIEW.exe has generated errors and will be closed by
Windows. You wlil need to restart the program.
An error log is being created.
================================
If there is a more appropriate place to post things of this nature that don’t really add to the discussion group, but need to be brought to the attention of NI, please post a URL or submittal method. Thanks...

Thanks for the detailed request. We are aware of this exact issue, and the problem was actually fixed for LabVIEW 7.0 for Mac/Unix. Unfortunately, it did not get fixed for the initial release of LabVIEW 7.0 for Windows, but we have plans to include the fix in the first LabVIEW patch for 7.0.
Also, the Discussion Forum is great for notifications of this kind. For future reference, you also have the options of emailing NI engineers directly, or calling us with suspected bug fixes, if you would like more direct communication.
Thanks again, and have a great day!
Liz Fausak
Applications Engineer
National Instruments
www.ni.com/support

Discoverer 3.1.42 User Edition Bug? EUL Corruption?

We have applied the 3.1.42 patchset but are experiencing some serious buggy behaviour.
The worst problem appears in User Edition if a Parameter is used in a Calculation and there are also Totals on one or more columns. When first created, this situation may work for a while, but further manipulations usually cause the query to crash with a message like: "Internal EUL error: EULParseNodeType error in canonical formula" (apologies: I don't have the exact message in front of me here). Once that error occurs, it seems to always occur in that Worksheet when a Calculation involves a Parameter AND there is a Total declared.
Is this a known bug? Has anyone else run across this? Does the Worksheet get corrupted in the EUL?
This one problem (oh, there are several others) is causing some significant grief.
Help is appreciated.
null

I haven't seen what you are mentioning yet. However, if you create a calculation or parameter in 3.142 and one of your users still has 3.141, the user will get an error message: Invalid combination of filters or calculations, query cannot be resolved. Upgrading to 3.142 corrects this for the user.

'User Order' bug? (3.3)

I've been having a recurring problem with my photos getting out of order when I add them to collections. The problem is occurring when I select and drag a group of photos from one collection, to another; or, when I select and drag the contents of a collection to a SmugMug gallery under the publish section. In both cases, the order of the photos, as arranged in the original collection as "User Order", becomes garbled in the new collection's User Order. However, if I "undo" copying the photos to the new gallery, and repeat the procedure exactly, after another try (or a few) the photos will eventually arrive at the destination in the proper order.
It seems like the more photos I try to copy to a new collection, the more likely I am to have the order get screwed up. If I have a collection of 60 photographs, I am able to keep the order most of the time if I copy them over 6 or 7 photos at a time. But if I select the entire collection of 60 photos and drag them to the destination, they almost always get screwed up.
Any ideas what's up here?

Hey Vince,
Thanks for that info, that's good to know. However, I think this is a separate issue. Let me see if I can explain it better.
I have a collection, let's call it "Nantucket Christmas". I want to publish it on Zenfolio, so I create a new gallery in Zenfolio, then, select all of the photos in the "Nantucket Christmas" collection, either by using cmd-a or by manually shift-clicking on the first and last images, then I drag those photos to the Zenfolio gallery. Let's say there are 10 photos in Nantucket Christmas, and my user order is numerically 1,2,3,4,5,6,7,8,9,10.
When I click over to the Zenfolio gallery (yet to be published), the 10 photos are in there, but they are ordered something like 4,5,6,7,1,2,8,9,3. At the bottom, it shows that the sort mode is "User Order", but they aren't in the User Order they began in in the Lightroom collection.
Now, if I hit undo several times (cmd-z on a Mac), it will remove the photos from the Zenfolio gallery. Then if I repeat the process, perhaps taking several such attempts, all undone, eventually it will copy the photos into the Zenfolio gallery in the correct order.
The fact that after several seemingly identical attempts I will get a different, normal result is what leads me to believe this is a bug and not user error.
I believe this problem also happens in the identical fashion if I am simply copying the photos from one collection, "Nantucket Christmas" to another collection, say, "Nantucket Holidays 2008-2010", without having anything to do with the publish tool. (For the record, I've never been to Nantucket, much less Christmassed there.)

Enable User activity bug

Hello,
I´ve noticed a problem when using the "Enable User" activity in AD IP for Orchestrator 2012.
If you use "Get User" to find an user and then use the published data from that activity in "Enable User", it will sometimes fail.
The error you receive is "The user 'CN=XXXXXX etc.' was not found.", even thoug the user exists and "Get user" found the user.
The problem is when the users DN contains "/", and is used in "Enable User", resulting in an incorrect "User was not found"
Example of object name in AD that will trigger this "Linde Thomas, Company A/S".
Removing "/" from the name will solve it, but we would like to have matching AD object name and display name.
EDIT: And the same is true for "Disable User" activity.
/Markus

Yes, the issue seems to still exist in verison 7.2 of the AD IP from Microsoft.
see also, for example:
https://social.technet.microsoft.com/Forums/en-US/4ee8b415-9e2c-4735-9803-b55a500f5c57/get-group-activity?forum=scogeneral
https://social.technet.microsoft.com/Forums/en-US/77797ce3-6070-4ca6-a651-8b21f517a148/active-directory-ip-remove-user-from-group-oh-no-it-doesnt
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Migration assistant, messed up users window, bug?!

Hi.
One of our Intel Core Duo iMacs (OS 10.4.11) just broke down (vertical colored lines and grey areas now comprise half of the screen). I just wanted to quickly transfer one important user account to a PowerPC mac running OS 10.4.11 using target disk mode and the Migration assistant. For some reason the window supposedly displaying the different user accounts is really messed up:
This is a reproducible problem. There should be several users displayed. Using the mouse, the blue horizontal line can be moved up but not further down. Effectively, I can not select the one account because I can not see it, and I can not just transfer all accounts because there is not enough disk space on the target computer.
I wonder whether anybody here could provide me with some help to troubleshoot this problem.
Thanks in advance,
Jens

Hello, is this using MA on both ends via networking, or with the Intel iMac in Target Mode & just MA running on the PPC Mac?
I don't have an Intel 10.4 Mac to test, but here's MA on PPC with other PPC in Target mode...

Web Login Page - User Password Bug - 11.1.2.1

This may be covered in one of the thousand readme documents or elsewhere; however, I thought I'd share this here just in case it isn't or you don't want to search various PDF documents.
We recently had a user complain that he could not login to FDM anymore. He used to be able to login with no issues; however, recently it would not let him in.
To rule out system issues, we checked the following:
- Verified others could authenticate FDM with no issue (OK)
- Verified account unlocked in Active Directory (OK)
- Tested logging in to FDM on other machines (Fail on all machines ruling out cookies, browsers, etc)
- Checked Shared Services provisioning (To ensure he was indeed still provisioned for FDM)
- Attempted logging in through Workbench (Failed, but good fail. Did not state unable to authenticate, but properly noted he was not an Admin and therefore could not use Workbench. Wonder why it "works" here but not web....)
Since it was obviously not some type of system/account issue, we then checked:
- What end user changes happened recently? (Password change)
As the only recent change was the user's password change, I asked the user what the password changed to. The new password was pretty vanilla, though I did notice one potential issue in that it including the & character.
As many here will note, the & character doubles as a concatenation character in VB/VBscript. As programs should be escaping any strings they attempt to process, this should not matter; however, if FDM isn't properly escaping via the web login page this may be causing the issue. After resetting the user's password without the & character, everything worked fine.
So the moral of the story here is that apparently the FDM web login code behind doesn't escape the password string. The bad part is that it may prevent someone from logging in. The worse part is that this is a potential security problem since it may lead to code injection attacks.
If you want to prevent end user issues, you may want to remove the & character from your domain's password policy.

You may also be interested to know that using special character in the internal administrator id will cause issues on 11.1.2.1 and 11.1.2.2 actually documented the characters you should NOT use. See http://docs.oracle.com/cd/E17236_01/epm.1112/epm_deploy_guide_1112200.pdf
I have also seen issues with the internal admin password when it was > 25 characters which caused the shared services migration utility to fail.
The moral of the story is "secure" passwords dont' always play well with software. Which I could see being a problem in the 1980's. With the advent of Unicode and it's ilk it's sad to see that arbitrary text is not properly escaped. I know I"m ranting to the choir though Charles ;).
Regards and Happy New Year!
John A. Booth
http://www.metavero.com

Create User Programmatically Bug

Does anyone know the reason Portal occassionally crashes when a
user is created programmatically? My application will email a
new user with a link that calls a PLSQL procedure that uses the
APIs to create a user and assign them to a group. It then
attempts to throw a public portal page for the user to login.
What happens is the user is created correctly, but before
opening the Portal page multiple error messages are displayed on
the browser. To successfully access Portal after this occurs,
all browsers must be closed, and a new then reopened. I saw
this as an open TAR on Metalink, but I was wondering if anyone
knows of a solution to this mess?
Thanks!

Hi Matthew,
I believe this may have something to do with the login cookies
that the Portal sets when the login page is served. If this
cookie is not established at the outset you may encounter some
errors. Not knowing the specific errors makes diagnosing this
somewhat tricky. I hope this helps.
Dave Ziegler
Rosenbluth International

User Interface Bug? "Current Location" Display in Audible Books

I have been an Audible audio book listener for many years on many different kinds of iPods. The iPhone is also great for this, but does introduce an interface change that I find undesirable.
When you tap on the book cover area of an audio book (in PORTRAIT) mode while an Audible book is playing, you get a nice display of where you are currently located in the audio book file.
However, on the iPhone, the display resulting from the foregoing method shows the current minute and second in the CHAPTER of the audiobook (i.e., a subdivision of the audio book file)--not the audio book file as a whole. This behavior is very different from that displayed on iPods. Thus, I need to remember that I am in Chapter 4 of Part 2 of "The Woman in White," for example, at 31:45. I also cannot tell by glancing at the readout how many minutes are left in the entire file; I can only tell how many minutes are left in the current chapter.
Does anyone else find this to be less user friendly than the standard iPod interface showing the current location in Audible books?

Yes, the "Pagination Display Position" lets you control where the pagination shows up. So you could put it top left, top right, bottom left, bottom right. IMHO there are pros and cons to each position.
Mike

OpenSSO user search bug

Hi, I have installed OpenSSO Enterprise 8.0 with Sun DSEE 6.3 as User DataStore.
The root suffix of DataStore is dc=example,dc=ru.
I have created new Realm named test and configured the following attributes of the generic ldap datastore in the DataStore tab in newly created Realm:
LDAP Organization DN: ou=test,dc=example,dc=ru
LDAP People Container Naming Attribute: ou
LDAP People Container Value: People
LDAP Groups container Naming Attribute: ou
LDAP Groups Container Value: GroupsNow I can create users in the Subjects tab in the my Realm and see them created in LDAP in branch ou=People,ou=test,dc=example,dc=ru.
The problem is: I cannot log in to OpenSSO using these accounts in my Realm. In LDAP logs I see OpenSSO trying to search for accounts only in the root suffix dc=example,dc=ru with SCOPE=ONE so it cannot find anything. Is this behavior expected? And how can I make users from my Realm login to OpenSSO?

You can do either:
- Add realm=Name_of_the_new_realm_created in opensso login URL
- Check and make the appropiate changes in the core service and/or ldap auth chain.
Regards

Are you tired of all the robo calls to your phone? If enough Verizon Wireless users start bugging Verizon to add "simultaneous ring" as a calling feature, we will be able to use "Nomorobo" to block unwanted robo calls. Start calling and bugging Verizon

Google Nomorobo and read up on this free service that stops robo callers.

I have read about Nomorobo. I have a Verizon "land line" which actually works with a router and operates like a cell phone. YES I WANT NOMOROBO

Can the webmaster fix mozilla's web site so that users don't end up with non working 32bit version of firefox on their 64 bit Linux (see bug #723487)?

I've been subsribed to bug #723487 (https://bugzilla.mozilla.org/show_bug.cgi?id=723487) for a year and a half, and I identified a problem in the way mozilla's site delivers the linux version of firefox almost a year and a half ago, but for reasons unknown to me, no one bothered to address this problem.
Other, properly built web sites that deliver binary software packages for linux, can successfully recognise if the user downloading firefox is using a 32bit or 64bit Linux distribution, and offer the appropriate version. Try www.libreoffice.org if you think that my claims are false.
But this somehow doesn't work with mozillas website, the website recognizes that the user's operating system is Linux, but doesn't try to figure out if it's a 32bit or 64bit linux, so the users end up with 32bit builds of firefox by default, which then don't work on their 64bit sytems.
The problem is even more intensified due to the rather stupid naming convention used by mozilla - both the 32 and the 64 bit versions are simply named identicaly - for instance firefox-29.0b6.tar.bz2 for the 29 beta 6 version. Other sane software producers (libreoffice, nvidia, qt-project) names their binary packages with different names (eg. the "x86" string is used for the 32bit version, "x64" for the 64bit version) so that the users don't end up trying to use (unsucsesfully; getting a cryptic error message) the wrong version. But in mozilla's case we end up with a lot of confused users filing bug reports, like the bug I mentioned above.
So to rephrase my question - is someone willing to do something about this (the QA Mentor who commented in bug #723487 has so far proven to be completely useless)?

The 64-bit Linux builds have been listed on the http://www.mozilla.org/en-US/firefox/all/ page since Firefox 27.0 or 26.0 I believe.
This link is listed under the green download button with the words of [http://www.mozilla.org/en-US/firefox/all/ Systems & Languages]

Password for a new bug tracker user

I installed bug tracker and it works fine. When I created a user I didn't find where to provide/change password. When I got login screen and type new user name, I don't know what is the password. How to set password for the new user in bug tracker?

It means that you can copy and paste an encrypted password from configuration file. Of course, passwords are encrypted if password-encryption service is enabled. Otherwise passwords are stored in plaintext in configuration files.

[Patch 정보] TRACKING BUG FOR CUMULATIVE MLR#6 ON TOP OF BPEL PM 10.1.3.3.1

최근에 출시된 BPEL PM 10.1.3.3.1의 통합패치입니다.
아래는 readme.txt에 포함된 patch list입니다.
# WARNING: Failure to carefully read and understand these requirements may
# result in your applying a patch that can cause your Oracle Server to
# malfunction, including interruption of service and/or loss of data.
# If you do not meet all of the following requirements, please log an
# iTAR, so that an Oracle Support Analyst may review your situation. The
# Oracle analyst will help you determine if this patch is suitable for you
# to apply to your system. We recommend that you avoid applying any
# temporary patch unless directed by an Oracle Support Analyst who has
# reviewed your system and determined that it is applicable.
# Requirements:
# - You must have located this patch via a Bug Database entry
# and have the exact symptoms described in the bug entry.
# - Your system configuration (Oracle Server version and patch
# level, OS Version) must exactly match those in the bug
# database entry - You must have NO OTHER PATCHES installed on
# your Oracle Server since the latest patch set (or base release
# x.y.z if you have no patch sets installed).
# - [Oracle 9.0.4.1 & above] You must have Perl 5.00503 (or later)
# installed under the ORACLE_HOME, or elsewhere within the host
# environment.
# Refer to the following link for details on Perl and OPatch:
# http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=189489.1
# If you do NOT meet these requirements, or are not certain that you meet
# these requirements, please log an iTAR requesting assistance with this
# patch and Support will make a determination about whether you should
# apply this patch.
# 10.1.3.3.1 Bundle Patch 6823628
# DATE: March 14, 2008
# Platform Patch for : Generic
# Product Version # : 10.1.3.3.1
# Product Patched : Oracle(R) SOA
# Bugs Fixed by 10.1.3.3.1 Initial patch 6492514 :
# Bug 5473225 - PATCH01GENESIS HOT UNABLE TO CATCH AN EXCEPTION DURING A
# TRANSFORM
# Bug 5699423 - PARTNERLINK PROPERTY THAT SET BPELXPROPERTY FUNCTION DOESN'T
# WORK
# Bug 5848272 - STATEFUL WEBSERVICES DEMO ON OTN DOES NOT WORK 10.1.3.1
# Bug 5872799 - ANT DEPLOY BPEL TEST FAILS/RUNS ON DEFAULT DOMAIN NOT
# SPECIFIED TARGET DOMAIN
# Bug 5883401 - ALLOW A WAY TO CREATE EMPTY NODES - AND USE FOR REQUIRED
# NODES
# Bug 5919412 - SAMPLE DEMO BPEL PROCESSES MIMESERVICE MIMEREQUESTER AXIS
# JAVA EXAMPLE ERROR
# Bug 5924483 - ESB SHOULD SUPPORT SOAP EDNPOINT LOCATION DYNAMIC UDDI LOOKUP
# Bug 5926809 - ORAPARSEESCAPEDXML XPATH EXPRESSION FAILED TO EXECUTE
# FOTY0001 TYPE ERROR
# Bug 5937320 - STRANGE BEHAVIOUR CALLING FROM BPEL TO BPEL GETTING
# NULLPOINTEREXCEPTION.
# Bug 5944641 - BPA BLUEPRINT NOT AVAIALBLE IN JDEVELOPER
# Bug 5945059 - JAVA.LANG.NULLPOINTEREXCEPTION SENDING EMAILS WITH PAYLOADS
# LARGER THAT 1MB
# Bug 5962677 - WS RESPONSE IS EMPTY SOAP BODY IN ONE-WAY CALL
# Bug 5963425 - WHEN THE OUTCOMES FOR A HT CHANGED & IMPORTED - UPDATE
# CONNECTION ROLES IN BPEL
# Bug 5964097 - AQ ADAPTER DEPLOYMENT CAUSES OPMN TO PERFORM A FORCEFUL
# SHUTDOWN IN SOA
# Bug 5971534 - CANNOT GRANT USER TASK VIEWS TO GROUPS, ONLY TO USERS.
# Bug 5989367 - REFER TO SR 6252219.993 BPEL 10.1.3 ONLY COPIES IN ASSIGN,
# IN 10.1.2 IT CREATES
# Bug 5989527 - ENHANCEMENT WARNING SHOULD BE GIVEN UPON UPLOAD IF BPEL
# PROCESS IS OPEN IN ARIS
# Bug 5997936 - ESB FAULT DOES NOT GET PROPAGATED TO BPEL
# Bug 6000575 - PERF NEED ESB PURGE SCRIPT TO PURGE BY DATE AND PROCESS
# Bug 6001796 - POSTING OF DATE RECEIVED FROM XML GATEWAY TO BPEL FAILED IN
# ESB
# Bug 6005407 - BPEL PROCESS DOESN'T PROPOGATE FAULT THROWN BY BPEL
# SUB-PROCESS
# Bug 6017846 - MIMETYPE OF EMAIL NOTIFICATION IS NOT SET THROUGH HUMAN TASK
# Bug 6027734 - DECISION SERVICE IMPORT - LOCATING DECISION SERVICE IN .DECS
# FILE IMPROPER
# Bug 6028985 - EXCEEDED MAXIMUM NUMBER OF SUBSCRIBERS FOR QUEUE
# ORAESB.ESB_CONTROL
# Bug 6041508 - CREATING/UPDATING DVM CAUSE EXCEPTION
# Bug 6053708 - FTP ADAPTER DOES NOT SUPPORT ENCRYPTED PASSWORD IN
# OC4J-RA.XML
# Bug 6054034 - INDEX4,INDEX5 AND INDEX6 CANNOT BE USED IN BPEL CONSOLE
# Bug 6068801 - BACKPORT OF BPEL ON WEBLOGIC - VERSION 10.1.3.3
# Bug 6070991 - HT EXPORT DOES NOT EXPORT PARAMETERS, ALLOW PARTICIPANTS TO
# INVITE OTHERS
# Bug 6071001 - WSIF HTTP BINDING NOT WORKING FROM ESB
# Bug 6073311 - STRESS SCOPE NOT FOUND ON CALLBACK - WRONG (DUPE)
# SUBSCRIPTION IN TABLE
# Bug 6081070 - JMS ADAPTER REJECTION HANDLER CREATE 0 BYTE FILES
# Bug 6083419 - DECISION SERVICE SCOPE NEED TO HAVE A SPECIAL INDICATOR
# Bug 6085799 - HUMAN TASK ADDED IN SCOPE IN JDEV IS NOT UPDATED TO BPA
# SERVER
# Bug 6085933 - EXPORT AND EXPLORE SHOULD USE USER LANGUAGE AND NOT ENGLISH
# ALWAYS
# Bug 6086281 - STRING INDEX OUT OF RANGE ERROR FOR COBOL COPYBOOK WITH PIC
# CLAUSE HAVING S
# Bug 6086453 - DOMAINS CREATED IN A CLUSTER GETS NOT PROPAGATED TO NEW OR
# EXISTING NODES
# Bug 6087484 - MULTIPLE HEADER SETTING CAUSES ESB EXCEPTION
# Bug 6087645 - ESB SHOULD ALLOW USER PICK RUNTIME PROTOCOL (HTTP/HTTPS)
# Bug 6110231 - TRANSLATION NOT BASED ON MQ CCSID CHARSET
# Bug 6120226 - BPEL IS NOT SETTING THE APPS CONTEXT CORRECTLY
# Bug 6120323 - COMPLETIONPERSISTPOLICY ON DOMAIN LEVEL HAS DISAPPEARED
# Bug 6125184 - ESB JMS SESSION ROLLBACK ORACLE.JMS.AQJMSEXCEPTION
# Bug 6127824 - [AIA2.0] CURRENT XREF IMPLEMENTATION IS MISSING REQUIRED
# INDEXES ON XREF SCHEMA
# Bug 6128247 - HTTPCONNECTOR POST() METHOD SHOULD RAISE EXCEPTION FOR ALL
# STATUS CODES EXCEPT 2
# Bug 6131159 - ENABLE USERS TO CHOOSE XSD WHEN CREATING A BPEL PROCESS FROM
# BLUE PRINT
# Bug 6132141 - PROCESS_DEFAULT TABLE STILL CONTAINS INFORMATION FROM
# UNDEPLOYED PROCESSES
# Bug 6133190 - ENABLING ESB CONSOLE HTTP/S IS MAKING THE CONSOLE TO COME UP
# BLANK.
# Bug 6139681 - BPEL WSDL LINK IN CLUSTERED RUNTIME POINTS TO A SINGLE NODE
# Bug 6141259 - BASICHEADERS NOT PUTTING WWW-AUTHENTICATE HEADERS FOR HTTP
# BINDING IN BPEL
# Bug 6148021 - BPEL NATIVE SCHEMA FOR COBOL COPYBOOK WITH IMPLIED DECIMAL
# LOSES DIGIT IN OUTPUT
# Bug 6149672 - XOR DATA - CONDITION EXPRESSION SPECIFICATION IS NOT
# INTUITIVE IN BPMN MODELS
# Bug 6152830 - LOSING CONDITIONAL EXPRESSIONS CREATED IN JDEV UPON MERGE
# Bug 6158128 - BASICHEADERS NOT PUTTING WWW-AUTHENTICATE HEADERS FOR HTTP
# BINDING
# Bug 6166991 - WHEN STARTING SOA SUITE,, PROCESSES FAIL DUE TO UNDEFINED
# WSDL
# Bug 6168226 - LOCATION-RESOLVER EXCEPTION THROWN IN OPMN LOGS
# Bug 6187883 - CHANGES FOR BPEL RELEASE ON JBOSS- VERSION 10.1.3.3
# Bug 6206148 - [AIA2.0] NEW FUNCTION REQUEST, XREFLOOKUPPOPULATEDCOLUMNS()
# Bug 6210481 - BPEL PROCESS WORKS INCORRECTLY WHEN AN ACTIVITY HAS MULTIPLE
# TRANSITIONCONDITION
# Bug 6240028 - WEBSERVICE THAT DOES NOT CHALLENGE FOR BASIC CREDENTIALS
# CANNOT BE INVOKED
# Bug 6257116 - MULTIPLE HEADER SETTING CAUSES ESB EXCEPTION
# Bug 6258925 - MESSAGE RECEIVED BY THE TARGET ENDPOINT VIA HTTP POST IS
# MISSING THE XML HEADER
# Bug 6259686 - TOO MANY UNNECESSARY WORKFLOW E-MAIL NOTIFICATIONS GENERATED
# Bug 6267726 - 10.1.3.3 ORACLE APPLICATIONS ADAPTER - NOT ABLE TO CAPTURE
# BUSINESS EVENT
# Bug 6272427 - WEBSPHERE BPEL FAILS FOR DATA RETRIEVAL OF SIZE 500+ KB
# Bug 6276995 - MERGE SCOPE NAME IS NOT UPDATED WHEN CHANGED IN THE SERVER
# Bug 6280570 - XPATH EXPRESSION ERROR IN MEDIATOR FOR ASSIGNING USER-DEFINED
# CONTEXT VALUES
# Bug 6282339 - RETRYCOUNT DOES NOT WORK PROPERLY
# Bug 6311039 - ONE RECORD IS INSERTED TO SYNC_STORE IF
# COMPLETIONPERSISTPOLICY SET TO FAULTED
# Bug 6311809 - [AIA2.0] NON-RETRYABLE ERRORS ARE NOT POSTED ON ESB_ERROR
# TOPIC
# Bug 6314784 - THE PRIORITY DEFINED IN THE BPA SUITE IS NOT TRANSFERRED TO
# THE JDEV CORRECTLY
# Bug 6314982 - THREADPOOL RACE CONDITION IN ADAPTER INITIALIZATION MESSAGES
# NOT PROCESSED
# Bug 6315104 - (SET)CLASSNAME MISSING IN TSENSOR JAXB OBJECTS
# Bug 6316554 - CONSUME FUNCTIONALITY OF JMS ADAPTER FOR BEA WEBLOGIC DOES
# NOT WORK
# Bug 6316950 - FILEADAPTER HARPER ENHANCEMENTS SYNC WRITE AND CHUNKED
# INTERACTION SPEC
# Bug 6317398 - THE ICON FOR COMPUTING DIFFERENCE IS MISSING IN JDEV REFRESH
# FROM SERVER DIALOG
# Bug 6320506 - IMPORT FAILS WHEN THERE IS AN UNNAMED CASE
# Bug 6321011 - CANNOT PROCESS 0 BYTE FILE USING FTP ADAPTER
# Bug 6325749 - TRACKING BUG FOR TRACKING ADDITIONAL CHANGES TO BUG #6032044
# Bug 6328584 - NEED A NEW XPATH EXPRESSION TO GET ATTACHMENT CONTENT VIA
# SOAP INVOKATION
# Bug 6333788 - COLLAPSING OF CONSECUTIVE ASSIGN TASKS BREAKS BAM SENSOR
# Bug 6335773 - BUILD.XML CONTAINS DO NOT EDIT .. - WHILE <CUSTOMIZE> TASK
# MUST BE IN <BPELC>
# Bug 6335805 - AQ ADAPTER OUTBOUND DOESN'T RECONNECT AFTER FAILURE
# Bug 6335822 - [AIA2.0] PSRPERFESB - RUNTIME DVM PERFORMANCE OVERHEAD IN ABS
# USE CASE
# Bug 6339126 - CHECKPOINT BPEL JAVA METHOD DOESN'T WORK IN BPEL 10.1.3.3
# Bug 6342899 - OUTLINECHANGE.XML NOT UPDATE WITH ACTIVITY FROM NEW BRANCH
# Bug 6343299 - ESB CONCRETE WSDL NAMESPACE SHOULD BE DIFFERENT FROM IMPORTED
# WSDL NAMESPACE
# Bug 6372741 - DEHYDRATION DATABASE KEEPS GROWING IN 10.1.3.3
# Bug 6401295 - NXSD SHOULD SUPPORT ESCAPING THE TERMINATED/QUOTED/SURROUNDED
# DELIMITERS
# Bug 6458691 - DIST DIRECTORY FOR 10.1.3.3.1 NEEDS UPDATE
# Bug 6461516 - BPEL CONSOLE CHANGES FOR DISPLAYING RELEASE 10.1.3.3.1
# Bug 6470742 - CHANGE THE VERSION NUMBER AND BUILD INFO IN ABOUT DIALOG IN
# ESB
# BUG ADDED IN MLR#1, 6671813 :
# Bug 6494921 - ORABPEL-02154 IF LONG DOMAIN AND SUITECASE NAMES IN USE
# BUGS ADDED IN MLR#2, 6671831 :
# Bug 6456519 - ERROR IN BPEL CONSOLE THREADS TAB:SERVLETEXCEPTION CANNOT GET
# DISPATCHER TRACE
# Bug 6354719 - WHICH JGROUP CONFIGURATION PARAMETER IMPACTS BPEL CLUSTER
# ACTIVITY
# Bug 6216169 - SCOPE NOT FOUND ERROR WHILE DELIVERING EXPIRATION MESSAGE OF
# ONALARM
# Bug 6395060 - ORA-01704 ON INSERTING A FAULTED INVOKE ACTIVITY_SENSOR
# Bug 6501312 - DEHYDRATION DATABASE KEEPS GROWING IN 10.1.3.3 #2
# Bug 6601020 - SEARCHBASE WHICH INCLUDES PARENTHESIS IN THE NAMES DOES NOT
# WORK
# Bug 6182023 - WAIT ACTIVITY FAILS TO CONTINUE IN CLUSTER WHEN PROCESSING
# NODE GOES DOWN
# BUGS ADDED IN MLR#3, 6723162 :
# Bug 6725374 - INSTANCE NOT FOUND IN DATASOURCE
# Bug 4964824 - TIMED OUT IF SET CORRELATIONSET INITIATE YES IN REPLY
# ACTIVITY
# Bug 6443218 - [AIA2.0]BPEL PROCESS THAT REPLIES A CAUGHT FAULT AND THEN
# RETHROWS IT IS STUCK
# Bug 6235180 - BPPEL XPATH FUNCTION XP20 CURRENT-DATETIME() IS RETURNING AN
# INCORRET TIME
# Bug 6011665 - BPEL RESTART CAUSES ORABPEL-08003 FAILED TO READ WSDL
# Bug 6731179 - INCREASED REQUESTS CAUSE OUTOFMEMORY ERRORS IN OC4J_SOA WHICH
# REQUIRES A RESTART
# Bug 6745591 - SYNC PROCESS <REPLY> FOLLOWED BY <THROW> CASE CAUSING
# OUTOFMEMORY ERRORS
# Bug 6396308 - UNABLE TO SEARCH FOR HUMAN TASK THAT INCLUDES TASK HISTORY
# FROM PREVIOUS TASK
# Bug 6455812 - DIRECT INVOCATION FROM ESB ROUTING SERVICE FAILS WHEN CALLED
# BPEL PROCESS
# Bug 6273370 - ESBLISTENERIMPL.ONFATALERROR GENERATING NPE ON CUSTOM ADAPTER
# Bug 6030243 - WORKFLOW NOTIFICATIONS FAILING WITHOUT BPELADMIN USER
# Bug 6473280 - INVOKING A .NET 3.0 SOAP SERVICE EXPOSED BY A ESB ENDPOINT
# GIVES A NPE
# BUGS ADDED IN MLR#4, 6748706 :
# Bug 6336442 - RESETTING ESB REPOSITORY DOES NOT CLEAR DB SLIDE REPOSITORY
# Bug 6316613 - MIDPROCESS ACTIVATION AGENT DOES NOT ACTIVATED FOR RETIRED
# BPEL PROCESS
# Bug 6368420 - SYSTEM IS NOT ASSIGNING TASK FOR REAPPROVAL AFTER REQUEST
# MORE INFO SUBMITTED
# Bug 6133670 - JDEV: UNABLE TO CREATE AN INTEGRATION SERVER CONNETION WHEN
# ESB IS ON HTTPS
# Bug 6681055 - TEXT ATTACHMENT CONTENT IS CORRUPTED
# Bug 6638648 - REQUEST HEADERS ARE NOT PASSED THROUGH TO THE OUTBOUND HEADER
# Bug 5521385 - [HA]PATCH01:ESB WILL LOSE TRACKING DATA WHEN JMS PROVIDER IS
# DOWN
# Bug 6759068 - WORKLIST APPLICATION PERFORMANCE DEGRADATION W/ SSL ENABLED
# FOR BPEL TO OVD
# BUGS ADDED IN MLR#5, 6782254 :
# Bug 6502310 - AUTOMATED RETRY ON FAILED INVOKE WITH CORRELATIONSET INIT
# FAILS
# Bug 6454795 - FAULT POLICY CHANGE NEEDS RESTART OF BPEL SERVER
# Bug 6732064 - FAILED TO READ WSDL ERROR ON THE CALLBACK ON RESTARTING BPEL
# OC4J CONTAINER
# Bug 6694313 - ZERO BYTE FILE WHEN REJECTEDMESSAGEHANDLERS FAILS
# Bug 6686528 - LINK IN APPLICATION.XML FILES CHANGED TO HARD LINKS WHEN MORE
# THAN 1 HT PRESENT
# Bug 6083024 - TEXT AND HTML DOC THAT RECEIVED AS ATTACHMENTS WERE EITHER
# BLANK OR GARBLED
# Bug 6638648 - REQUEST HEADERS ARE NOT PASSED THROUGH TO THE OUTBOUND HEADER
# Bug 6267726 - 10.1.3.3 ORACLE APPLICATIONS ADAPTER - NOT ABLE TO CAPTURE
# BUSINESS EVENT
# Bug 6774981 - NON-RETRYABLE ERRORS ARE NOT POSTED ON ESB_ERROR TOPIC
# Bug 6789177 - SFTP ADAPTER DOES NOT SUPPORT RENAMING FILES
# Bug 6809593 - BPEL UPGRADE TO 10.1.3.3.1 WITH ESB CALLS FAILS DUE TO
# CACHING OF PLNK - SERVICE
# BUGS ADDED IN MLR#6, 6823628 :
# Bug 6412909 - <BPELX:RENAME> DOES NOT ADD XMLNS DECLARATION AUTOMATICALLY
# Bug 6753116 - OUTPUT FROM HUMAN TASK IS NOT IS NOT CONSISTENT WITH
# SCHEMA
# ORDERING
# Bug 6832205 - BAD VERIFICATIONSERVICE PERFORMANCE IF LDAP SERVICE HAS HUGE
# DATA
# Bug 6189268 - CALLING BPEL PROCESS VIA SOAP FROM ESB FAILS WITH
# NAMENOTFOUNDEXCEPTION
# Bug 6834402 - JMS ADAPTER IMPROPERLY CASTS XAQUEUESESSION TO QUEUESESSION
# Bug 6073117 - TASK SERVICE DOESN'T RENDER THE TASK ACTIONS
# Bug 6054263 - REUSING SOAP WSDL IN RS CAUSES SOAP ACTION'S NS TO BE
# STRIPPED
# AWAY
# Bug 6489703 - ESB: NUMBER OF LISTENERS > 1 GIVES JMS EXCEPTION UNDER STRESS
# Bug 5679542 - FTP ADAPTER: COULD NOT PARSE TIME:
# JAVA.LANG.STRINGINDEXOUTOFBOUNDSEXCEPTION
# Bug 6770198 - AQ ACTIVATIONINSTANCES >1 DOESN'T WORK IN ESB
# Bug 6798779 - ESB ROUTING RULES CORRUPTED ON RE-REGISTERING WITH ROUTING
# ORDER
# IN WSDL CHANGED
# Bug 6617974 - BACKPORT REQUEST FOR MOVING FILES FUNCTION OF FTP ADAPTER
# Bug 6705707 - VALIDATION ON ESB CAN'T HANDLE NESTED SCHEMAS
# Bug 6414848 - FTP ADAPTER ARCHIVE FILENAME FOR BPEL IS BEING SCRAMBLED
# AFTER
# THE 10.1.3.3 UPGR
# Bug 5990764 - INFORMATION ARE LOST WHEN BPEL PROCESS IS POLLING FOR MAILS
# WITH
# ATTACHEMENTS
# Bug 6802070 - ORA-12899 SUBSCRIBER_ID/RES_SUBSCRIBER COLUMN SMALL FOR LONG
# DOMAIN AND PROCESS
# Bug 6753524 - WRONG SERVICE ENDPOINT OPEN WHEN TEST WEB SERVICE OF ESB
# Bug 6086434 - PROBLEM IN BPEL FILE ADAPTER WHILE READING A FIXED LENGTH
# FILE
# Bug 6823374 - BPEL 10.1.3.3.1 BAM SENSOR ACTION FAILS WITH BAM 11
# Bug 6819677 - HTTS STATUS 202 RETURNED INSTEAD OF SOAP FAULT
# Bug 6853301 - MQ ADAPTER REJECTED MESSAGES IS NOT REMOVED FROM THE RECOVERY
# QUEUE
# Bug 6847200 - 10.1.3.3.1 PATCH (#6748706) HAS STOPPED FTP ADAPTER POLLING
# IN
# SFTP MODE
# Bug 6895795 - AQ OUTBOUND DOESN'T WORK WITH MLR#6
업무에 참고하시기 바랍니다.

David,
You are right, theer are some changes incorporated in the latest MLR # 16 on the configurations files and on the dehydration store metrics(such as performance, fields,..).
However, I would not suggest to continue working on olite, even for Development/Test purposes as you might get stuck with strange errors...and the only solution would be to re-install SOA Suite if your olite gets corrupted. There might be ways to gets your olite back to position, but trust me..its not so simple.
Also, when you develop and stress test all your testcase scenarios in an TEST Adv installation, its simple to mimic the same in actual production box, as you exactly know its behavior.
So, go for a brand new SOA 10.1.3.4 MLR # 5 (or) 10.1.3.3.1 MLR # 16 SOA Suite Advanced installation with Oracle DB 10.2.0.3 as its dehydration store.
Hope this helps!
Cheers
Anirudh Pucha

User-maxlinks bug

Similar Messages

Maybe you are looking for