User measurement report (USMM) for SAP 3.1H

Hi,
I need to take generate user measurement report. This report generally can be executed from tcode USMM. However, my SAP system runs on SAP 3.1H. Has anybody run this report on SAP 3.1H version?
Thanks,
Intan

Hi,
I am able to execute "USMM" from SAP 3.1H. These means that I am able to generate the report right?
My concern is - I am unable to generate report even if I am able to access tcode USMM.
Anyway, I will try to get the report again from USMM.
Thanks,
Shafinaz

Similar Messages

Error "CONVT_NO_NUMBER" while performing user measurement with USMM

Hi,
While running user measurement with USMM I am getting following run
time error.
To be specific - After preselections in USMM->system measurement->while
checking Green Check mark this error is screaming up.
Ae per Note - 1230640 :- You call transaction USMM and want to cancel
the user measurement using the cancel button (red 'X') on the dialog
box of the user measurement. However, the measurement continues and is
completed as if you had chosen the ok button (green check mark).
Above note is applied if the problem comes if we check red button
rather than green check mark.
Please suggest us the best way to procees.
ST22 details:-
Runtime Errors CONVT_NO_NUMBER
Exception CX_SY_CONVERSION_NO_NUMBER
Date and Time 09/16/2008 07:42:32
Short text
Unable to interpret " 1,410 " as a number.
What happened?
Error in the ABAP Application Program
The current ABAP program "RSUVM001" had to be terminated because
it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to
class 'CX_SY_CONVERSION_NO_NUMBER', was not
caught and
therefore caused a runtime error.
How to correct the error
Whole numbers are represented in ABAP as a sequence of numbers,
possibly
with an algebraic sign.
The following are the possibilities for the representation of
floating
point numbers:
[mantissa]E[algebraic sign][exponent]
[whole number part].[fraction part]
For example, -12E+34, +12E-34, 12E34, 12.34
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able
to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the
following
keywords:
"CONVT_NO_NUMBER" "CX_SY_CONVERSION_NO_NUMBER"
"RSUVM001" or "RSUVM001"
"START-OF-SELECTION"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
Information on where terminated
Termination occurred in the ABAP program "RSUVM001" - in "START-OF-
SELECTION".
The main program was "RSUVM001 ".
In the source code you have the termination point in line 96
of the (Include) program "RSUVM001".
85 * Analyze the user records.
86 CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
87 EXPORTING
88 text = 'Die Benutzerstammsätze werden analysiert.'(002).
89 * PERFORM analyze_user_records.
90
91 CALL FUNCTION 'SLIM_USER_MEASUREMENET'
92 CHANGING
93 SLIM_TUREP = LT_TUREP.
94 .
95 LOOP AT LT_TUREP INTO LS_TUREP .
>>>>> MOVE-CORRESPONDING LS_TUREP TO ITUREP.
97 APPEND ITUREP.
98 ENDLOOP.
99
100 * Submit Application measurements as batch jobs.
101 * Save additional data about this analysis in the DB.
102 * we need meas-no ,v-date at the batch
any ideas?

Hi Srikanth,
The below Notes helps you to solve the issue.
Please review the below Notes.
Note 1117010 - Runtime error CONVT_NO_NUMBER in RSUVM001
Note 1115924 - USMM composite SAP Note: Problems after importimg new SPs
Thanks & Regards,
Pradeep Srigiri

Where to find Crystal Report Formats for SAP B1 8.8 (India Localization) ?

Hi Experts,
do anybody knows Where to find Crystal Report Formats for SAP B1 8.8 (India Localization) ?
For example
Sales Register
Purchase Register
Journal Register
Sales Analysis - Crystal Report
Purchase Analysis - Crystal Report
Check Register - Crystal Report
Production register
Pending Sales Order
Outstanding Receivable
Outstanding Payable
BankBook
CashBook
General Ledger
BP Ledger (Customer / Supplier)
Trial Balance
Balance Sheet
Profit & Loss Statment
Cash Flow statment
Excise reports
   RG 23 A Part I
   RG 23 A Part II
   RG 23 C Part I
   RG 23 C Part II
   Daily Stock Account
   RG 1
   ER 1
   etc....
Documets Layout
   Incoming Payment
   Outgoing Payment
   Journal Entry
   Transaction Journal Report - Crystal Report
   Sales Quotation
   Sales Order
   Sales Delivery
   Sales Return
   Sales Invoice (A/R Invoice)
   Purchase Order
   Goods Receipt PO
   Purchase Goods Return
   Purchase Invoice (A/P Invoice)
Inventory Transfer
Inventory - Goods Receipt
Inventory - Goods Issue
Best Regards,
Samir Gandhi

Hi Neetu,
Do you wish that at all customer site all concern involved in implemtation do the same work ?
I believe ERP is meant for single entry system, and it should be true for implementation also, why to invest man hours for the same task ?
I expect it standard reports should be released by SAP, so that speed of implementation improve, we have more nos. of satisfied customers.
customised reports is all together different and it is understood that it is needed to be developed after study the exact requirement.
Best Regards,
Samir Gandhi

What's ObjectId in Crystal Report 2008 for SAP B1 8.8

Hi all!
I am using Crystal Report 2008 for SAP B1 8.8, i don't know ObjectID use for what. In some report temlate of Crystal Report 2008 for SAP B1 8.8, i saw they aways use this.
Please explain for me.!!
Thanks!

There is a very usefull document, HowTo_Work_withCR_88.pdf.
This should have been in you 8.8 upgrade package.
This document explains quite a bit about how to create crystal reports and how to import into 8.8 as reports, or layouts.
Your question is not specific enough for me to answer, but if you re-phrase it, I'll see if I can help.
Rob

Combine report list for SAP-PP module

Respected SAP GURU,s
Can any body give me the combined report list of SAP-PP modules or give some direction to search it.
SFC route is not required...
pl reply urgently
Rewards point will be given.
VEDANT

Hi,
These are the few reports
1. KanBan Analysis1 Plant
Txn Code: MCQ.
This report gives information of KanBan usage. This can be used only when KanBan Component is used.
2 KanBan Analysis 2
KanBan Board Demand Source Overview
Txn Code:
PK11
PK12
PK13
PK18
This report gives information of KanBan usage. This can be used only when KanBan Component is used.
3 Material Usage Analysis Plant
Txn Code: MCRE
This report can be used for analyzing the actual material usage against plan in manufacturing process.
4 Product Cost Analysis Selection Plant
Txn Code: MCRI
This report can be used for finding out planned cost vs. actual cost in the manufacturing process
5 Missing Parts Info System
Txn Code: CO24
Missing Part List Check

Security issue in Crystal Report 2008 for SAP B1

Hi Friends,
I want to hide the Query which is used in my report from the end user,I don't want they can see and edit the report after exporting from sap b1.
Please help.....its urgent
Thanks.
Andy

Hi Andy,
SAP B1 is an OEM version of CR 2008. I can't move your post so please mark as answered and post your question to this forum:
/community [original link is broken]
Thank you
Don

Maximum user and hardware requirement for SAP B1

Dear All,
One of our prospect said that they will need 80 users and 160 connections to servers. And every year there will be additional user growth as much 30. What will be the hardware requirement for that ? has SAP B1 installed in that kind situation ? I appreciate your answer.
Rgds,

Mark,
Please refer to the following PDF
https://websmp206.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000270512007E&_SCENARIO=01100035870000000183&_ADDINC=
Regarding 80 user initially with a growth of 30 user every year should not be a problem, but you might want to consider the volume of transactions to determine the performance aspect of the system.
Also check the following link
https://websmp206.sap-ag.de/smb/sbo/resources
Good luck
Suda

Add-Ins menu not visible in Crystal report for Sap Business One

Hi,
I have installed the Crystal Report Design for Sap Business One on my customer server.
But when I open the Crystal Report I can't see the Add-Ins menu to put the rpt directly on my Sap Business One.
I have installed it on many customer, but only with this I have this type of problem.
There is some restriction on Sap Version/Patches or Authorization Users or some check that I have to set on Sap or on Crystal Report?
Regards
Marco

Hi All,
i have the same issue on crystal report add-ins. Have you able to solve this without upgrading our sap business one to the latest version or patch level? Please see details below.
OS: MS Windows 7 SP1
SAP Business One 8.82 pl7
Crystal report 2011
Crystal report integration package installed under B1_SHare/Client
But still the problem persist on the workstation.
Please help me solve this problem.
Thank you,
ana

Crystal Reports background processing for SAP Business One 8.8

Dear Partners,
I have an SDK program developed in SAP Business One SDK that works in 2007, it calls crystal reports externally and can be executed as a background task using the windows schedular or from the command prompt.
My problem is it does not work under SAP Business One SDK 2008 PL18 with SQL Server 2008, Visual Studio 2008.
I receive the following message after this line in my code,"oReport.PrintToPrinter(CopyNo, False, 0, 0)".
'CrystalDecisions.CrystalReports.Engine.LogOnException: Logon failed.
Error in File XX_Report_Ver_0.01 {1A6620A2-5D73-49D2-9347-32ED068AA64E}.rpt:
Unable to connect: incorrect log on parameters. ---> System.Runtime.InteropServices.COMException (0x8004100F): Logon failed.
Error in File XX_Report_Ver_0.01 {1A6620A2-5D73-49D2-9347-32ED068AA64E}.rpt:
Unable to connect: incorrect log on parameters.
   at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetLastPageNumber(RequestContext pRequestContext)
   at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.
   at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at BGProductionRpt.ECR_Common.ECR_PrintReport(Int32 CopyNo) in C:\SDK Development\8.8\test\XX_Rpt\ECR_Common.vb:line 485'
My Question is what Crystal Reports libraries or other method should I be using ?
Crystal Reports 2008 for SAP Business One eg. 51038978.zip - downloaded from portal obviously dosn't contain the CrystalDecisions libraries.
Crystall Reports 2008 - cr2008_sp3_fullbuild, cr2008fp33.exe, cr2008fp33_mm, cr2008fp33_clickonce - also download from the portal, the cr2008_sp3_fullbuild does contain the crystal decisions libraries.
Finally other choices are crystal reports included with the visual studio 2008 and crystal reports full version direct from Business Objects.
I have tried different versions of crystal decision libraries- eg, 12.0110 or 12.02 but still no joy.
Also if I manage to get the report to fire what should the client be running eg, if they have the Crystal Reports 2008 for Business One do they also need to install the Crystal Reports Run time - cr2008fp33_clickonce.
Any help would be appreciated.
Thanks.

Hi John
Since the SDK works in 2007 it will be using the OLD DB access method.
Change the Crystal report to use an OLE DB datasource rather than the SAP Business One data source.
Regards
Rob

Crystal Report for SAP B1 8.8

Hi All !
I can not finish for designing template layout for Sales Quotation by Crystal Report 2008 for SAP 8 8
I have already done for template of sale quotation but when i print preview in SAP for this one, system did not understood and it get all data from Sale quotation in database. I would like to assign specify Sales Quotation Doc number which i want to Print preview on my template.
How can i assign or how can i have to create what parameter.
Thanks!

Hi,
Try this:
For Sales Order
The DocKey@ token is mandatory in a Crystal Reports .rpt file that you want to use as a
layout. The DocKey@ token is used to identify the current active document. SAP Business One
populates its value when you preview or print a layout.
When you apply the DocKey@ token, in the Select Expert window, you need to specify a filter
condition, such as:
{ORDR.DocEntry}={DocKey@}
If the DocKey@ token does not exist, create a new parameter with the following settings:
In the Name field, enter DocKey@
In the Type dropdown list, select Number
In all other fields, leave the default settings
Then Save report as layout to B1
Try previewing this layout as you will notice it will no longer ask for a parameter.
This likely behaves as a standard layout
Try searching forums or channel portal regarding Parameter Tokens
Thanks,
JP

Problem when trying to print standart invoice crystal report for SAP

Hi All, I have the following problem when trying to print a system invoice report in crystal reports for SAP
I pass params and load the report using this code
Private Sub DisplayThreadReportSeq()
Dim oView As New frmViewReport
Dim strReportPath As String = ""
Dim strParamName As String = ""
Try
Dim CR As New ReportDocument
CR.Load(oReport.CrstPath)
' Declare the parameter related objects.
SetReportValues(CR)
Dim crParameterDiscreteValue As ParameterDiscreteValue
Dim crParameterFieldDefinitions As ParameterFieldDefinitions
Dim crParameterFieldLocation As ParameterFieldDefinition
Dim crParameterValues As ParameterValues
' Get the report's parameters collection.
For Each oPar As cslParam In oReport.Params
crParameterFieldDefinitions = CR.DataDefinition.ParameterFields
crParameterFieldLocation = crParameterFieldDefinitions.Item(oPar.ParName)
crParameterValues = crParameterFieldLocation.CurrentValues
crParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue
crParameterDiscreteValue.Value = oPar.Value
crParameterValues.Add(crParameterDiscreteValue)
crParameterFieldLocation.ApplyCurrentValues(crParameterValues)
Next
If pPrint Then
If oReport.Printer "" Then
CR.PrintOptions.PrinterName = oReport.Printer
End If
CR.PrintToPrinter(IIf(oReport.Copies = "", 1, oReport.Copies), False, 0, 0)
SBO_Application.StatusBar.SetText("Printed Document Successfully", SAPbouiCOM.BoMessageTime.bmt_Medium, SAPbouiCOM.BoStatusBarMessageType.smt_Success)
Else
oView.Text = pReport
oView.TopMost = True
oView.Viewer.ReportSource = CR
oView.Hide()
oView.ShowDialog()
End If
Catch ex As Exception
Util_GenErrorLog("DisplayReport", ex)
End Try
End Sub
This code works fine when the report invoke to print is developed in crystal reports version for .net 2008 or .net 2005
when trying to print a report standart getting from SAP BO 8.8.1 using this code I getting the following error:
Error in File C:UsersecombaAppDataLocalTemp5ARInvoiceStandartSap {300B9A68-DF05-4D7B-8F3B-1670A4493BEE}.rpt:
Error in formula .
'Shared numberVar SectionTotalMaxHeght;
A number, currency amount, boolean, date, time, date-time, or string is expected here.
This report is the standart report that SAP 8.8.1 includes and works fine on SAP.
I referenced this dlls CrystalDecisions.CrystalReports.Engine.dll, CrystalDecisions.CrystalReports.Shared, version 10.2.3600
How I can get these dll´s version for Crystal Report 2008 for SAP Business one or How I can solve this problem
thanks in advance,
Ezequiel.

Hi Ezequiel,
You can try to search in SAP Business One Reporting & Printing forum section or post there.
nd.Q

RG23A in Crystal report for SAP Business One

Hi All Experts,
Can Anyone Provide me RG23A part I And RG23A Part II in Crystal report Format For SAP Business One Database
Regards ,
Gayatri Shukla

Hi All,
i have the same issue on crystal report add-ins. Have you able to solve this without upgrading our sap business one to the latest version or patch level? Please see details below.
OS: MS Windows 7 SP1
SAP Business One 8.82 pl7
Crystal report 2011
Crystal report integration package installed under B1_SHare/Client
But still the problem persist on the workstation.
Please help me solve this problem.
Thank you,
ana

Crystal report error in SAP

I have linked my first Crystal report into SAP (2007A), but when I try to run it I get an error.
Msg header "SAP Crystal AddOn"....Could not load file or assembly 'CrystalDecisions.Windows.Forms, Version = 12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
I searched the SAP forums, but found nothing regarding this error. Anybody have an idea how to fix? I can't see my Crystal report. Does the report need to be stored in a specific location for it to be called from SAP? I was able to browse to it when I setup the link in SAP.
Edited by: shredder on Nov 17, 2009 11:52 PM

Hi Shredder ,
Actually you should have posted in reporting and printing forum ..anyway close your previous thread too..
and please take a look at this
*I copy from the other thread *
Client you need to install .net framework 3.5 and Crystal Run time to run reports.
in the client make sure the shared directory is accessible from run without any password
and in the add on go to report properties and set the path to the shared folder .rpt files and apply changes
use OLE DB connection
CRYSTAL REPORTS 2008 V1 FOR B1
(click on Installation)
https://websmp208.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=N&FUNCTIONBAR=N&EVENT=TREE&TMPL=01200314690900002156&V=INST
Crystal Reports Integration for SAP Business One
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/707f51b3-0b20-2b10-8daa-d8ee72ace309 [original link is broken]
in case you have any problem installation go through the demo and make sure you have installed correctly
https://websmp201.sap-ag.de/~sapidp/011000358700000727712008E.htm
Hope this helps
Bishal

Using OLAP Connection for SAP BW based on authentication type Prompt

We try to use an OLAP Connection based on authentication type Prompt. This should cause a dialog to popup where the user can enter credentials for SAP BW. This works fine for Analysis for OLAP, but not in Web Intelligence and Design Studio.
In design studio the following message appears:
failed to connect to "BA1CLNT100"
Configuration of destination
customized_guid:FnTHdVPWmQ4AMLQAAD4XL4cAAFBWmWVp is incomplete:
Parameter user id missing: neither user nor user alias nor sso ticket nor certificate is specified.
Does anyone know if this feature is supported and what causes this error?

Hi,
Can you check the option "Disallow insecure incoming RFC connections" from CMC >> SAP Authentication and see if it helps.
-Ambarish-

Documentation for Business Content Rapid Marts Reports for SAP R/3

Hi,
As we have technical documentation for SAP BI business content BI reports on SAP HELP Portal,
is there any link where we can find the technical documentation for business content reports supported by SAP BOBJ Rapid marts for R/3 solution like for HR module.
I would like to know what kind of reports are available as a part of rapid mart business content and what are the measures ( key figures ), dimensions ( characteristics ) supported by each of these standard business content rapid mart reports.
I have referred business guide and user guide for HR rapid marts but they just give an overview of what analysis can be done.But there is no technical documentation for each of the possible rapid mart reports.
Thanks,
Tarun Brijwani.
Edited by: Tarun Brijwani on Feb 10, 2011 4:00 PM

Tarun,
Please share if you got some help on your post.

User measurement report (USMM) for SAP 3.1H

Similar Messages

Maybe you are looking for