User Menu is blank

Hi Experts.
We are using Derived role concept, when user loged he unable to get User Menu, it is showing blank,
I have applied SNOTE: 1246860 and 1459115.
Still unable to resolve the issue.
Release: SAP_BASIS 700 SAPKB70022
Please help me.
Thanks & Regards,
Firoz.

Update:
cause was a weak role design.
Expanding a folder caused MESSAGE_TYPE_X dump:
Termination occurred in the ABAP program "SAPLOLEA" - in "AC_SYSTEM_FLU
The main program was "SAPLSMTR_NAVIGATION ".
In the source code you have the termination point in line 29
of the (Include) program "LOLEAU02".
CASE SY-SUBRC.
    WHEN 0.
    WHEN 1.
*     system_error
      MESSAGE ID 'CNDP' TYPE 'X' NUMBER 007 RAISING CNTL_SYSTEM_ERROR.
    WHEN 2.
*     method_call_error
>>>>> MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
    WHEN 3.
*     property_set_error
      MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
    WHEN 4.
*     property_get_error
Too many entries on the first menu level. so the issue described in note 362883 appeared.
Redesign of menu structure would be the best solution, switches as per a.m. note are just a workaround.
b.rgds, Bernhard

Similar Messages

Main Menu is blank!?

This may be a dumb question, but when I open up Garageband, the complete right side of the main menu is blank. There is no options for me to choose "electric guitar, songwriting, podcasts, etc." How do I get these logos back on there?

muthastone wrote:
This may be a dumb question, but when I open up Garageband, the complete right side of the main menu is blank. There is no options for me to choose "electric guitar, songwriting, podcasts, etc." How do I get these logos back on there?
This happened to me and, while you may be able to fix with minimal effort (try throwing out both GB preferences, repair permissions and see if it works), I had to uninstall and reinstall GB!
If you need to do that as well, here's how.
Uninstall by:
• removing GB receipts (at the hard drive level)
• removing GB preferences (at the user level)
• removing the Caches folder (at the user level - it will grow back)
• remove the GB application
Install by:
• selecting only GB from your install disk (deselect other apps)
• making sure to select all additional GB content
• install
Then:
• the usual... repair permissions, restart computer, throw salt over shoulder, boot up GB.

Menu-cache blank menu in lxpanel

I have installed lxpanel but when i run it as a non-root user the menu is blank showing only "Run" and "Logout... this problem happen when i update menu-cache.
if i downgrade menu-cache to 0.6.0.1 everything work good. menu, mount point in pcmanfm ecc ecc. i try to remove cache but the problem persist
how i can fix this?

Hi Ellen,
Copying from web pages can include some weird formatting. Instead of Paste, use Paste and Match Style (Edit Menu).
Regards,
Ian.

Unable to Open Bex report from SAP APO User Menu

Hi All,
I am an SAP APO consultant, and have not miuch expereice in BEx reporting. As APO uses Build in BI for reporting and pulling history from either external BW or R/3.
Now my issue all BEx reports we use are assigned ot my user menu and when I select a report, I would expect report to open but an excel sheet opens and closes and nothing happens. However I am able to open this reports from my desktop menu selecting Business explorer and Analyzer and linking my SAP system. I use Excel 2007 , Is this some compactibilty issue or is there anything I need to do?

Hi KV,
There's a couple of possible root cause why you dont see properly the Bex Report.
Can you share to me the APO version and the BW software component being used?
In case this is still in the 3.x, 4.x APO, I think, a separate BW add on is needed for you to run your BEx report properly. You can ask your basis team for this separate installation.
Btw, is this report working before, meaning was it pulled successfully already in the past?
Can you try doing this again in a separate workstation, as the BW add on is installed separately per workstation.
Its possible that this is also an auth issue that the user you are using is not capable enough to run BEx.
As of now, I have not encountered any Bex issue that is related with the Excel version, I have tried running Bex in Excel 2007 no issue also. I think it maybe more related with the OS you are using, if its in Vista already what I know is you need to add your excel as a trusted document before you can run bex fro Vista.
Let me think of other possibilities.
Hope this helps.
- Jeff

How to disable the Super User menu - (Right click windows icon menu) - Server 2012 R2 - RDS

Greetings all,
Can anyone please advise how to remove the Administrator / Super User menu that appears when you right click the Windows Icon (old start button) in Server 2012 R2 - for RDS users. I have searched and been able to disable access to each of these menu items (Control
Panel, Event Viewer, Run, etc). But I am searching for a way to completely remove the menu. This menu also appears when you use Win-X shortcut.
Hope someone can help.
Terry

Hi Terry,
You can try following points, might helpful in your case. Go to
C:\Users\Default\AppData\Local\Microsoft\Windows
there you will see file called WinX
Right click this file and copy then go to
C:\Users\YOUR_USERNAME\AppData\Local\Microsoft\Windows
then paste the file into the folder.
NOTE: replace YOUR_USERNAME with your actual username.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to Hide User Menu at the Bottom of the Screen

Hi, all:
I am new to apex, currently using 3.2.1.
I have created a simple interactive report, the screen shows report data correctly AND
a user menu at the bottom. the user menu content is:
user name
Home Application 101 Edit Page 1 Create Session Activity Debug Show Edit Links
how do I hide this menu when end user access the app?
Thanks,
John

Hi,
That "menu" is called developer toolbar.
It is visible only when you have login to APEX builder and run your app.
So it will not be visible for end users.
Regards,
Jari
My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai

How to find the user menu of a user

Hi,
I have a request to change the description of a custom transaction in the user menu of a user. Im not sure
How to find the user's user menu...
Can we add any small documentation or comments to each object in user menu...
Thanks in advance
search before posting , it is a warning to you
Edited by: Vijay Babu Dudla on Dec 31, 2008 5:00 AM
Edited by: Vijay Babu Dudla on Dec 31, 2008 5:05 AM

Welcome to SCN.
Just refer: [Area Menu Maintenance |http://help.sap.com/saphelp_nw2004s/helpdata/en/00/783b377bfdcf61e10000009b38f936/frameset.htm]

Transaction code for user menu, sap easy access

Hi system experts!
Does anybody know which transaction causes the user-specific menu within "SAP easy access" (the welcome screen after login, like /n does) ?
I need it to be called from a portal iView, so that the usual sapgui-like screen with the user's menu appears in a portal screen, both for SAPGUI for windows and http.
Trx. S000 or SESSION_MANAGER does not cause the user-specific menu when called from the portal. These work least of all for call via ITS.
thanks
Andreas

hi ,
The transaction code is SE41.. This is for creating Menus and tool bars.
you can also try SMEN it will call the user menu as you described in your post.
Regards,
Krishna
Message was edited by: Krishnakumar

Workbook in role but not on user menu

Hi All
I have a workbook saved under a certain role menu. The workbook apeears fine under the role when using BEx.
However, the workbook has disappeared from the User-Menu in SAP-GUI.
I have tried to refresh the user menu, change and re-save the workbook in the role (via BEx and via PFCG), I checked report: RSWB_ROLES_REORG but nothing helped.
I searched for notes but nothing seemed relevant.
Any help?
Thanks,
Yaniv

Hi,
The issue because of MS 2007. it would not be compatible sometimes.
for that you have install the latest patch for the BEx and dotnet framework on your desktop.
it would be available in the service market place.
or
We have had several issues similar running SAP BW 7.0 with BEx 3.5 workbooks after upgrading to Excel 2007. There are several SAP Notes concerning various Excel 2007 related errors. Most of these seem to be bundled in the just-released SAP BEx 3.5 Add-On Patch 7 for SAPGUI 710, so my advice would be to download this patch if you have not done so already.
Regards,
Marasa.

Understanding the User Menu in XI

hi,
I am pretty new to XI (as you can probably tell by few queries i have posted).
When you log in to your XI SAP system, the system essentially displays a "User Menu", which includes many folder with different options for monitoring, sld, runtime settings, configuration,...etc.
Just curious to find out what each of the options on the user menu does and more so when would you actually use those options. Have tried to click on some of the options and get familiar with them. But is there a more specific document provided by SAP that explains each functionality (besides maybe the documentation help).
Also speaking as a beginner, what is a good strategy to get more acquainted and understand XI? Your thoughts would be appreciated.
Regards,
Manpreet

Hi,
Apart from help.sap.com, u have very good Articles in the articles section which will speak about Design, configurations, Adapters, Runtime and all u need in different pdf files and ppts. all u need to do is go to Articles section and serch for the Right document that u need. ( i cannot mention all the pdf file names here.. it will fill the whole page ).
also when u go to XI home page, u will find
e-learning link on the righthand side. Listen to the Beginners section.This will also help u a lot.
While creating scenario's u can look at the weblogs section of XI. and its a knowledge repository ( help.sap.com made simpler )
all the above mention links help u in understanding XI better. But u should start working on
1) simple File to File
2) File to DB and other simple scenario's to really get how things work in XI.
The best part is u already have weblogs (step-by-step procedure ) mentioning these.... )
For the rest u have XI forum )
Hope this helps you.
Cheers,
Siva Maranani.

Error in sql server with a trigger (I want to display a customize message, when the user left a blank field or null) How can I do?

How I display a customize message(with a trigger)when a user left a blank field? I want to the stop the insert statament if the user left the status field in blank. I create a trigger but now I can't enter a row, i used an instead trigger
too but doesn't work. I want to display a customize message when the user left the
status field in blank or null.
I have the following code:
CREATE TRIGGER [dbo].[BLANKFIELD]
ON [dbo].[Status]
FOR INSERT
AS
BEGIN
IF (SELECT COUNT(*) FROM inserted WHERE Status IS NULL) =1
PRINT 'Please Fill the Status field is required'
Rollback;
END

I agree with other comments that you should do this with specifying that the column is NOT NULL to prevent it from being NULL and a constraint if you don't want it to be blank (spaces or the empty string - note that the empty string is not the same thing
as NULL).
But for completeness, the reason your trigger does not ever allow you to enter a row is the code
IF (SELECT COUNT(*) FROM inserted WHERE Status IS NULL) =1
PRINT 'Please Fill the Status field is required'
Rollback;
Since you don't have a begin/end block after IF, the only conditionally executed statement is the one immediately following the IF (that is the PRINT). So the Rollback is always executed whether or not the IF is true and so all updates are rejected.
So if you were to do this in a trigger you could do something like the following
CREATE TRIGGER [dbo].[BLANKFIELD]
ON [dbo].[Status]
FOR INSERT
AS
BEGIN
IF EXISTS(SELECT * FROM inserted WHERE Status IS NULL)
BEGIN
PRINT 'Please Fill the Status field is required';
Rollback;
END
END
(As José noted, there can be more than one row in the inserted pseudo table, so you don't want to test whether the COUNT = 1, instead just whether one or more rows exist where the Status is null. If you want to prevent Status is NULL, or all
spaces, or the empty string, then your IF statement would be
IF EXISTS(SELECT * FROM inserted WHERE ISNULL(Status, '') = '')
Tom

No user menu available in PI 7.1

Hi,
in a new installed PI 7.1 I logged on with my user (profile SAP_ALL), but have only the SAP menu and no user menu enabled.
I already checked table USERS_SSM with SM30 like described in note 380029, but it seems to be ok.
What is missing for enable the user menu?
Thanks and regards
Patrick

The profile is not enough also the needed role has to be added in PFCG.

I am loging in SAP. Initial screen come where it display User Menu and Sap

Dear All,
When i am loging in SAP. Initial screen come where it display User Menu and Sap Menu, but User menu is in active not showing but T code are executing then what object i have missed.
can u help me?
Thanks,
Regards,
Sachin

Hi Sachin,
It doesn't care if you're using SAP_ALL or any of those profile. That is not relevant. I had that case a few days ago, I'm not using any of those profiles and I made it work with help of one post.
If you put the transactions in the tab "Menu" of the role in the PFCG, and if you activate parameters I mentioned in a prior post, then you should see the Menu.
Tables SSM_CUST and USERS_SSM. The first is global and the other is user-especific.
The link in one of the first post of this thread hace all the info.
That should work, that worked in my case.
What values the parameters have on those tables? The more the info the better.
Updating the parameters on those tables should help. If still doesn't work then you should check another parameter using transaction RZ10 or report RSPARAM.
If my info solves your problem, points are appreciated, if not, we will try...
Jose

How to create a duplicate of the Manager ID field in the Create user menu

Hi,
I´m trying to create a duplicate of the Manager ID field in the Create user menu (with a different label). I need to add it a field with the same funtionality of the Manager ID field (search users with filters) but I don´t know how.
I try to made a new adapter using the Thor.API.Operations.tcUserOperationsIntf but it don´t let me to map the input parameters.
Also I try to assing an existent Lookup to a new UDF, but I couldn´t find the correct one.
Did anybody do that??
Thanks!

Hi Kevin,
First I created a a user defined field called USR_UDF_CONDUCTOR (Lookupfield type).
Then I added the following lines to de FormMetaData.xml file:
</Attribute name="-750" label="global.label.conductor" displayComponentType="LookupField" variantType="long" dataLength="50" map="USR_UDF_CONDUCTOR">
<ValidValues lookupMethod="findUsersFiltered" operationClass="Thor.API.Operations.tcUserOperationsIntf" displayColumns="Users.User ID,Users.Last Name,Users.First Name" selectionColumn="Users.User ID"/>
</Attribute>
<AttributeReference editable="true" optional="true">-750</AttributeReference>
When I try yo Create a new user, the OIM System Administrator returns a System Error.

After the last update of Firefox, my toolbar menu became blank but the bookmarks are still available from a pulldown menu. I want the on the toolbar like they used to be. How do I recover this?

After the last update of Firefox, my toolbar menu became blank but the bookmarks are still available from a pulldown menu. I want the on the toolbar like they used to be. How do I recover this?

''Attaboyslim wrote:''
I am locked into firefox.
If nothing happens when you press the F11 key, check if you have the same problem in Safe Mode.
* [[Troubleshoot Firefox issues using Safe Mode]]
''Attaboyslim wrote:''
I'd like the old browser please.
* [[How to make the new Firefox look like the old Firefox]]

User Menu is blank

Similar Messages

Maybe you are looking for