User migration Utility

Hello will there be a user migration utility in Windows 10? If so I would like to test it. Will the User State Migration Tool work in windows 10?

Hi Morgan Ecklund,
Microsoft has released the Windows Assessment and Deployment Kit (Windows ADK) for Windows 10 Technical Preview, we could download from the link below:
http://www.microsoft.com/en-us/download/details.aspx?id=45522
For the components, see:
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

FDM - User migration utility

Hi ,
We migrated the FDM App from 9.3.1 to 11.1.2.1..
In 9.3.1 we have MSAD users provisioned. We need to migrate provisioning.
we tried to migrate the provisioning using FDM - User migration utility.But its not recognizing MSAD user names......We are getting " Username not found". though in SS these names are present.
................How to solve it

How many users do you have that are MSAD accounts?
Is the user you are using to run the migration tool a Shared Services Provisioning Manager?

User Migration Utility/Procedure

Does a utility exist that will allow me to select the archived user directory from a failed install to recover the home directories of the old users? or do I have to follow a manual process? Does anyone have this procedure handy?

Yes, it is called Migration Assistant. It worked as advertised.

Migration Utility Question RE: User accounts

Hi,
I bought a new Macbook Pro and set it up with myself as the user. There wasn't much data on it, I just used it to surf the net. Now I would like to give it to my daughter to replace her three year old MBP. She will use the Migration Utility to transfer all her programs etc. I have tried to find the answer here but haven't been able to. My question is, will migration replace my user account with her's or will mine remain and her's be added as a new one? Probably best to start from scratch? Thanks

Thanks for the help..Now the problem is finding the correct cable. The old machine has a different firewire port than the new one. It looks like she needs a 6pin to 9pin..no one in Dallas has it..! We tried ethernet but it is looking for a network.

I used the migrator utility to transfer music and picture from my old PC and now I have 2 accounts on my new Mac, how can I get back to one account and still have the music and photos transfered ?

I used the migrator utility to transfer itunes and photos from my old PC to my new Mac and ended up with 2 accounts on my new computer. How do I transfer the music and photos and only have the 1 account on the new Mac ?

That's not easy. The Windows migration tool makes a new user account, and you can't prevent it.
You may be able to transfer what you want manually, but it's not quick or easy. See Transferring files from one User Account to another.

9.3.1 Migration Utility gives "Project does not exists" error in log

In preparation for using Hyperion Reporting and Analysis 9.3.1, I have installed the following on a Linux test server:
--Oracle App Server 10.1.3
--Oracle Database 10g XE
--Hyperion shared services 9.3.1
--Hyperion UI Services 9.3.1
--Hyperion SQR Production Reporting 9.3.1
--Hyperion Reporting and Analysis, Financial Reporting 9.3.1
Everything is up and running and I created a new user account in Shared Services to administer the system, and attempted to give it full access by provisioning it with all the available roles. I received an error message stating
"+OracleJSP: An error occurred. Consult your application/system administrator for support. Programmers should consider setting the init-param debug_mode to "true" to see the complete exception message.+"
I'm investigating that now, but the roles seemed to be assigned to the user anyway.
When attempting to migrate from HPSu 8.5.2 to Reporting and Analysis 9.3.1 using the 9.3.1 Linux x86 Migration Utility (V11333-01 from edelivery.oracle.com), I get the following error message in a test migration:
The migration process has been failed on 'User Defined Roles' migration step*
I set the log level to debug and looked it over and here are the error details:
+\[09 16 10:49:29,080] \[ERROR ] The migration process has been failed on 'User Defined Roles' migration step+
+\[09 16 10:49:29,081] \[ERROR ] com.hyperion.interop.lib.OperationFailedException: Project does not exists by this id '%201252935352214.11'.+
com.hyperion.pmt.migrator.common.CommonException
at com.hyperion.pmt.migrator.userprovision.tool.MigrationManagerImpl.doAssignDefaultGroup(MigrationManagerImpl.java:864)
at com.hyperion.pmt.migrator.userprovision.tool.MigrationManagerImpl.startMigration(MigrationManagerImpl.java:751)
at com.hyperion.pmt.migrator.userprovision.ui.panels.MigrationPanel$ProcessRunner.run(MigrationPanel.java:304)
Caused by: com.hyperion.interop.lib.OperationFailedException: Project does not exists by this id '%201252935352214.11'.
at com.hyperion.interop.lib.helper.AdminProjectHelper.getProjectNameByID(Unknown Source)
at com.hyperion.interop.lib.CMSClient.getProjectNameByID(Unknown Source)
at com.hyperion.pmt.migrator.userprovision.tool.MigrationManagerImpl.getDefaultGroupBundle(MigrationManagerImpl.java:824)
at com.hyperion.pmt.migrator.userprovision.tool.MigrationManagerImpl.doAssignDefaultGroup(MigrationManagerImpl.java:861)
+... 2 more+
We've only one user-defined role in the source system that I don't think is giving us this issue, it is inactivated and "User Roles" was not one of the selected objects to migrate.
I would like to try taking the role completely out of the source system if possible, preferably through SQL applied to the V8 tables or through the SDK.
The error looks like it lies in the migration task following the user role provisioning, doAssignDefaultGroup* and is caused by getProjectNameByID*
The steps I have taken (for sanity sake) so far are:
--I've removed all associations with this user defined role in the source system (users, groups, and roles) using the administrative interface on the web.
--I've unchecked 'User Defined Roles' on the list objects to migrate from the source to target systems in the Migration Utility, but I still get the error.
It looks like it is trying to provision a user defined role in the target system, but it is not finding a default project by the id in the error message.
Are there any Shared Services steps in the target system that need to be taken besides creating a manager type user to use as a log in for the Migration Tool?

I turned on the jsp debug init-param for the system for more information about the error. I get the following:
Request URI:/interop/jsp/css/CSSTemplate.jsp
Exception:
OracleJSP:oracle.jsp.parse.JspParseException: /jsp/css/provisionSummary.jsp: Line # 119, <bean:define id="appId" name="appName" property="key"/>
Error: Tag attempted to define a bean which already exists: appId
When I attempt to provision the user I created for administrative purposes, Ialso see the following:
--from the file SharedServices_Metadata.log I see the error:
+2009-09-18 15:55:32,399 \[AJPRequestHandler-HTTPThreadGroup-6\] ERROR com.hyperion.eie.common.cms.CMSFacade - org.apache.slide.structure.ObjectNotFoundException: No object found at /users/admin+
--from SharedServices_Admin.log
+2009-09-17 14:49:20,583 \[Thread-13\] ERROR com.hyperion.cas.server.CASAppRegistrationHandler.loadApplicationsFromCMS(CASAppRegistrationHandler.java:430) - AuthorizationException occured when loading applications : Refer log in debug mode for details+
How does one set these logs into debug mode ?

Qosmio X500 Folder migration utility and low disk space drice C

This may be a longish post as I try to explain my problem... please forgive.
I've had my X500 for just over three months now.
It took a little while before the folder migration utility woke up I didn't know it was there after I'd done a limited copy of folders across from my old Qosmio F20. After it had woken up and I'd been able to transfer folders/files across it cleared a lot of room from the 'tiny' - I feel, 60 Gb SSD C drive.
I keep getting a message coming up sometimes, when I boot up, that the folder migration utility has a setting for me. If I open the utility it shows no folders in the 'C' drive area and folders already transfered [from first using it] in the right hand side for the 'D' drive. Text in the bottom of the utility says something like "if you have done some manual transfers then it can't do anything"... something along those lines - sorry for not being clear on that.
I've recently installed some other programs and have endeavoured each time to do a custom install to the D drive to program files [x86] folder. However, drive C is now showing low disk space at 5.58 of 59.2 Gb.
Checking the folders copies??? I thought for the programs I installed I find lots of folders/files in those program folders so taking up a lot of space.
What is the best way to free up space on drive 'C' please?
Should I manually copy the data contained in the folders [not just a 'name' ... ie; AVID... folder but possibly also in the drive C Program files [x86] folder] to the same named folders on drive D?
If I did, would the programs work properly or would there be problems in the program being located?
When the utility first activated [by itself] I thought "Great... transfer of all my old data to the X500 will be easy" but it doesn't seem to be the case. I was expecting that any new programs installed would be automatically copied to drive D. I'm getting somewhat paranoid about the low disk space on drive C.
Help would be appreciated.

Thanks for coming forward PauPau.
Firstly, when I got the x500 I had lots of documents etc., I wanted to transfer over so I used the Win7 Transfer program to make the back up/transfer images. In doing the transfer across [after the copies of] the X500 gave an error warning that the C: drive had insufficient space to do the full copies. At this time/stage I was not aware that the X500 had a folder migration utility. What ever made it 'wake up' and make itself known I have no idea but I used it when it did. My first problem was probably in using the Win7 file transfer - for getting files/folders across from the old computer to the x500!
I ended up doing a factory reset about three times before this utility made it self known. I found NOTHING in ant documentation about the X500 about this utility and how to make use of it when I bought the laptop. Not sure if you are aware of the make up of the X500 having 2 hard drives; a 'C:' drive of 65Gb SSD and a SATA 'D:' drive of 650GB. If you do then my apologies if that comes over in any 'bad' way. The D: drive is NOT a partition of 1 installed hard drive as your reply would seem to suggest you are thinking.
The migration folder utility, when used first time, copied/transfered folders across - even program folders such as Program files [x86] - and left 'similar' named folders on the C: drive. At that time I then thought that any future installs of programs would be put in the D: drive. Only when watching the first time for a new program install did I see it going to the C: Program and Program files [x86] folders instead of those in the D: drive. I then had to uninstall and do a custom install to direct to the D: drive. However... some data appears that it can NOT be directed from the install disk to the D: drive and still goes to the C: drive - HENCE the issue I am having with the small amount of remaining free space on the C: drive.
I accept what you say in reply to my question about the best way to free up space but, based on as explained above, should I have to do a re-install of any program I try to run after being moved to the same named corresponding folder on the separate D: drive [if that is what I have to do] I think the install disk will still do an automatic install of these to the C: drive as at that stage there seems no way of stopping it. Although given the option in a custom install to change the 'drive' to install to such as the D: some data is still going to C: and I'll be in the same predicament that I am now.
If that's the case then maybe this is something that TOSHIBA should be looking in to solving if they are going to produce laptops with two hard drives - - - even if one [the C: drive] is of the SSD make to speed thing up.
I DO appreciate your input. MAybe I didn't explain properly first time... and maybe I haven't this time - in which case I apologies.
Are there no other X500 users with the same issue?
Thanks. I may just have to give it a go and transfer these data files/folders manually to the D: and see what happens if no one here can guide as to stop any hair pulling frustrations if it goes wrong.

Migration from Stellent v7.g to UCM 11g - Configuration Migration Utility

Hello,
I am in the process of planning a migration from the old Stellent 7.5 system to the new Oracle UCM 11g.
I keep hearing of a utility called "Configuration Migration Utility" to setup the 11g system with the same users, folders, metadata, etc... as the older Stellent system. Does anybody know where to find this utility? Is there a single tool that will "export" the configuration from my Stellent and import that configuration onto my 11g?
Please let me know.
Thanks!
JDM

Hi
CMU tool is a way to create the entire configuration bundle from 1 instance to the other .
This is a component that will be available from patchset 13526049 which is for CS 7.5
You will need to put this patchset on the 7.5 server and then from the option list select CMU which will then install the component on server .
For ucm 11g it is already installed on the server but disabled by default .
Thanks
Srinath

Error while running tablespace migration utility.

Hi,
Am migrating from 11.5.9 to 11.5.10.2
while running the OATM utility $FND_TOP/bin/fndtsmig.pl it prompts for the connecting string and as soon as I give my database name(i.e connecting string) it is exiting with error as
Unable to get the host of the database from <SID>
And am trying to run it with the user as applmgr. Where am I wrong.....??
Thanks in advance,
Patel

Duplicate thread ..
Error while running tablespace migration utility.

Mountain Lion - Migration Utility basic questions

when I (hopefully) get mountain lion working, I'm assuming the migration utility will be there -
as opposed to my previous upgrades, this time my plan is to be very selective, and only bring a choice few applications & utilities to the new system...
is it possible to do this with the Migration Utilty? Or is it strictly an "all or nothing" deal? Can I be selective and just pick this or that app ?
AND... I get more than one shot at using it, right? I can migrate a few apps at first and then go back to the Migration Utilty and bring over a few more apps?
w

what I got from that is (among other things) is that there are two ways to bring over stuff (accounts & apps etc) from a previous system, Setup Assistant & Migration Assistant. I didn't realize they were two distinct processes.
Can you explain the differences between the two?
In tems of what I want to do, would you recommend either one? Or one over the other?
I'm thinking that the answer is probably no - I should just reinstall the apps & utilities that I want.
Does that mean I should create an entirely new account name & identity as the administrator & sole user of the new Mountain Lion system?
grateful for any info...
Thanks
will

EPM 11.1.1.4 Migration Utility

Hi,
By running Migration Utility 11.1.1.4 will this move all content from old Hyperion PerformaceSuite to new EPM workspace or is this just copy/paste
and Old HPS will still have the content? (Copy/Paste or Cut/Paste)?

Yes , Using the migration utility.. You can transfer the users, groups ,roles and also the Repository Files to the EPM v11.. As per oracle recomendation, run the migration utility seperately for each step.. In the case if you encounter any issues, you can debug and rerun that step..
I have ran all the steps at a single step and i didnt encounter any issues..
Any reason why you want to do on EPM 11.1.1.4, if your is new install .. I would recommend to go directly to 11.1.2.1.. As migration uility is supported until 11.1.2.1
Note: If you are having Interactive Reporting in your environment,, documen id's will get changed so any offline saved BQY's wont work straight away.
Hope this helps

ACS 5.3 Migration Utility Failures

I'm trying to run the migration utility to export from ACS 4.2.0(124) to an ACS 5.3 appliance, and am receiving the "
Fatal Error !! - cannot connect to ACS 4.x DB !!" error when I run the utility on the migration machine. The migration machine has ACS 4.2.0(124) installed and is a Windows 2008 Standard Server SP1 running as a VM. I am logging into the server with VNC (*not* RDP) with a locally-defined administrator account. I get these errors in migration.log when I run the utility and try to do an "analyze and export" function:
07-26-2012 13:36:55 JavaUtils.isAttachmentSupported(JavaUtils.java:1308) WARN - Unable to find required classes (javax.activation.DataHandler and javax.mail.internet.MimeMultipart). Attachment support is disabled.
07-26-2012 13:37:14 ACS4Connector.checkDBConnectivity(ACS4Connector.java:137)FATAL - Fatal Error !! - cannot connect to ACS 4.x DB !!
java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
at ianywhere.ml.jdbcodbc.IDriver.makeODBCConnection(Native Method)
at ianywhere.ml.jdbcodbc.IDriver.connect(IDriver.java:354)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at com.cisco.nm.acs.mgmt.migration.ACS4Connector.getConnecter(ACS4Connector.java:66)
at com.cisco.nm.acs.mgmt.migration.ACS4Connector.checkDBConnectivity(ACS4Connector.java:133)
at com.cisco.nm.acs.mgmt.migration.MigrationApplicationCLI.runExport(MigrationApplicationCLI.java:605)
at com.cisco.nm.acs.mgmt.migration.MigrationApplicationCLI.main(MigrationApplicationCLI.java:266)
Any ideas?

Hi there,
The migration utility doesn't work when running Windows 2008 or 64-bits machines. This is already documented:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtn17779
Let me know if it helps.

Exchange 2010 to 2013 users migration

Hi,
I am migrating users from Exchange 2010 to 2013 and facing a lot of migration issues. few of them are as follow.
1. It hung up at "syncing" and end up with a failure.
2. After a long migration i got the following errors
Error: MigrationPermanentExeception: Failed to reset the target mailbox after the move. Error Details:MaipExceptionADUnavailable: Unable to prepopulate the cache for user :: on domain controller xyz.domain.com (hr=0x80004005,ec=2414) Diagnosti Context: Lid:
65256 Lid:1494 ---- Remote Context Beg ---- Lid: 52664 StoreEc: 0x96E Lid: 35973 StoreEc: 0x96E Target Mailbox unlock operation was not replicated. If a lossy failover occurs after the target mailbox was unlocked, the target mailbox could remain inaccessible.
Error details: Target mailbox connection was lost.
3. users migration is taking a lot of time although mailbox size is not big and both servers are in same datacenter.
Need urgent help pls....

Hi,
Here are the general steps for troubleshooting mailbox moves:
1. If the move request didn't complete, view the Move Request Statistics.
2. If the move request completed with errors, view the move report.
3. View the Event log on the Client Access server running the instance of the Microsoft Exchange Mailbox Replication service that's processing the failed move request.
4. use the Exchange Management Console or the Exchange Management Shell to increase the diagnostic logging levels on the Client Access server for the Mailbox Move and Service categories of the MSExchange Mailbox Replication service.
For more detailed information about general steps for troubleshooting mailbox moves, you can refer to the article below:
http://technet.microsoft.com/en-us/library/dd638094(v=exchg.141).aspx
Additionally, in order to narrow down the cause, I’d like to confirm the following information:
1. Are the problematic target mailboxes in the same database?
2. Is there a time boundary? After that, you cannot move mailboxes:
http://social.technet.microsoft.com/Forums/en-US/90403f75-e530-478a-ab68-27823b730f68/exchange-2013-batch-to-migrate-users-from-2010-database-is-hung-at-syncing-after-a-disaster?forum=exchangesvrdeploy
Thanks,
Angela
Angela Shi
TechNet Community Support

Error while configuring User Management Utility

Hi All,
I am trying to configure User Management Utility for messaging server and calendar server. But while doing this it is failing to create service. The utility creates roles, configures with the webserver but fails to create service.
This was the error :
PASSED: /bin/sh -c /opt/nicp/ps62/SUNWam/bin/amadmin -u "uid=amadmin,ou=People,o=apollo" -f /opt/SUNWcomm/lib/config-template
s/amadmin1718 -t /opt/SUNWcomm/lib/config-templates/changeComms.xml : status = 0
PASSED: /bin/sh -c /opt/nicp/ps62/SUNWam/bin/amadmin -u "uid=amadmin,ou=People,o=apollo" -f /opt/SUNWcomm/lib/config-template
s/amadmin1718 -t /opt/SUNWcomm/config/createroles.xml : status = 0
FAILED: /bin/sh -c /opt/nicp/ps62/SUNWam/bin/amadmin -u "uid=amadmin,ou=People,o=apollo" -f /opt/SUNWcomm/lib/config-template
s/amadmin1718 -t /opt/SUNWcomm/config/createservices.xml : status = 1
PASSED: /bin/sh -c /opt/SUNWcomm/sbin/config-wbsvr : status = 0
FAILURE: Number of task failed:1. Please check install log
/opt/SUNWcomm/install/Iscli-config_20041021221229.log
for further details.
It could be useful if someone could throw some light on this.
Thankx in Advance,
s2810

As I said in response to your other, smaller post, I'm not sure where you are, and this snippet of errors doesn't help me.

LMS 4.2, User Tracking Utility

Hello everyone;
I had a new installation of LMS 4.2 and everythinks works fine but User trucking utility database has an empty host name / IP address. Any one knows the reason why this information is not polled ?
Thanks
Alina Andiraos

Hi Alina,
Seems that you have configured SNMP V3 on your devices. If this is the case, the command below will be required for every VLAN on every device running SNMP V3:
snmp-server group group_name v3 auth context vlan-vlan_id
example:
snmp-server group LMS v3 auth context vlan-1
snmp-server group LMS v3 auth context vlan-2
Have a good day.
Moath Rawasheh

User migration Utility

Similar Messages

Maybe you are looking for