User Missing Error while Executing a Bex Query.
Hi,
I created a query using BEx Query Designer, i'am trying to execute the query. After giving the Login ID and Password to execute in EP it shows a exception called 'user' missing.Kindly help out regarding this issue.
With Regards,
Pradeep.B
Hi Zoltan,
How to opn it through Analyzer can you please tell me.If i'am unable to open after creatinga new user as you said what roles i have to give or If am able to open thriugh Analyzer what is the Manditory role i need to check for the user in EP.
Please let me know am new to this BI.
Thnaks and Regards,
Pradeep.B
Similar Messages
-
Error while executing report in query designer
Dear Folks,
I am geting following error while executing report in query designer.
Error:500 E
an exception raised because of 0analysis pattern.
Hence,i am unable to execute any report.
Need help.
ThanksHi Kitu G,
I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
I would try and do the following:
- Goto RSA1 > BI Content > BEx Web Template (BTMP)
- Then double-click on Select Object.
- Highlight all objects that start with 0ANALYSIS_PATTERN
- Click on Transfer Selections, and then Install.
If you can't do the above in prd, do it in DEV, then transport the objects to prd.
After all this, try re-running your queries.
Any questions/clarification just let me know
Cheers.
Darwin -
Error while executing the workbook query.
Hi guyz
i'm getting an error while executing the workbook Query. The actual problem is there is a filter for REQUID in the query definition for removing the doble count. there is customer exit written. the report works fine in DEVELOPMENT but it is not working in quality.
The query on which this workbook is created is working fine, but the problem is when we execute the workbook i'm facing this issue.
we re-transported the queries but still we are facing the same problem.
while we execute the query we are prompted for variable entry(Optional) for date. when we press OK we get the below error
" NO SID value found for the value REQU_4DQT75Y2RJPVT4PXZ4LHC70V3 of characteristic"
the request is not available in the BW system. the request was deleted long back, but it is still referring to the same the request id
could someone please tell me where we went wrong and why we are getting this error.
Regards,
Anil VaddeHey ,I think data load to your target on which the query was based had some issue.
Can you check the data load to the data target.change the status of request concerned to red and delete.do reconstruct if neeed..I think the request had some issue.
Even you can go to RSRQ or RSMO and filter on the basis of this request and see its status.
Regards,
RK -
RWI 00200 Error while scheduling the Bex Query based Webi report
Dear All,
I am facing the below error while scheduling the Bex Query based Webi report.
Error:RWI 00200
We are using BO XI 4.0 Sp05.
Please adviseHi,
I am on BO 4.0 SP05 Patch 6. Webi reports are just showing processing but not giving results. When I try to create new report it is throwing java security error.
Tried applet patch upgrade(From link : https://websmp207.sap-ag.de/~sapidb/011000358700000902752013E) for webi certificate but didn't help.
Please suggest what could be done.
Thanks and Regards,
Ankit Sharma -
Error while executing a sql query for select
HI All,
ORA-01652: unable to extend temp segment by 128 in tablespace PSTEMP i'm getting this error while i'm executing the sql query for selecting the data.I am having 44GB of temp space, while executing the below query my temp space is getting full, Expert please let us know how the issue can be resolved..
1. I dont want to increase the temp space
2. I need to tune the query, please provide your recomendations.
insert /*+APPEND*/ into CST_DSA.HIERARCHY_MISMATCHES
(REPORT_NUM,REPORT_TYPE,REPORT_DESC,GAP,CARRIED_ITEMS,CARRIED_ITEM_TYPE,NO_OF_ROUTE_OF_CARRIED_ITEM,CARRIED_ITEM_ROUTE_NO,CARRIER_ITEMS,CARRIER_ITEM_TYPE,CARRIED_ITEM_PROTECTION_TYPE,SOURCE_SYSTEM)
select
REPORTNUMBER,REPORTTYPE,REPORTDESCRIPTION ,NULL,
carried_items,carried_item_type,no_of_route_of_carried_item,carried_item_route_no,carrier_items,
carrier_item_type,carried_item_protection_type,'PACS'
from
(select distinct
c.REPORTNUMBER,c.REPORTTYPE,c.REPORTDESCRIPTION ,NULL,
a.carried_items,a.carried_item_type,a.no_of_route_of_carried_item,a.carried_item_route_no,a.carrier_items,
a.carrier_item_type,a.carried_item_protection_type,'PACS'
from CST_ASIR.HIERARCHY_asir a,CST_DSA.M_PB_CIRCUIT_ROUTING b ,CST_DSA.REPORT_METADATA c
where a.carrier_item_type in('Connection') and a.carried_item_type in('Service')
AND a.carrier_items=b.mux
and c.REPORTNUMBER=(case
when a.carrier_item_type in ('ServicePackage','Service','Connection') then 10
else 20
end)
and a.carrier_items not in (select carried_items from CST_ASIR.HIERARCHY_asir where carried_item_type in('Connection') ))A
where not exists
(select *
from CST_DSA.HIERARCHY_MISMATCHES B where
A.REPORTNUMBER=B.REPORT_NUM and
A.REPORTTYPE=B.REPORT_TYPE and
A.REPORTDESCRIPTION=B.REPORT_DESC and
A.CARRIED_ITEMS=B.CARRIED_ITEMS and
A.CARRIED_ITEM_TYPE=B.CARRIED_ITEM_TYPE and
A.NO_OF_ROUTE_OF_CARRIED_ITEM=B.NO_OF_ROUTE_OF_CARRIED_ITEM and
A.CARRIED_ITEM_ROUTE_NO=B.CARRIED_ITEM_ROUTE_NO and
A.CARRIER_ITEMS=B.CARRIER_ITEMS and
A.CARRIER_ITEM_TYPE=B.CARRIER_ITEM_TYPE and
A.CARRIED_ITEM_PROTECTION_TYPE=B.CARRIED_ITEM_PROTECTION_TYPE
AND B.SOURCE_SYSTEM='PACS'
Explain Plan
==========
Plan
INSERT STATEMENT ALL_ROWSCost: 129 Bytes: 1,103 Cardinality: 1
20 LOAD AS SELECT CST_DSA.HIERARCHY_MISMATCHES
19 PX COORDINATOR
18 PX SEND QC (RANDOM) PARALLEL_TO_SERIAL SYS.:TQ10002 :Q1002Cost: 129 Bytes: 1,103 Cardinality: 1
17 NESTED LOOPS PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 129 Bytes: 1,103 Cardinality: 1
15 HASH JOIN RIGHT ANTI NA PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 129 Bytes: 1,098 Cardinality: 1
4 PX RECEIVE PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 63 Bytes: 359,283 Cardinality: 15,621
3 PX SEND BROADCAST PARALLEL_TO_PARALLEL SYS.:TQ10001 :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
2 PX BLOCK ITERATOR PARALLEL_COMBINED_WITH_CHILD :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
1 MAT_VIEW ACCESS FULL MAT_VIEW PARALLEL_COMBINED_WITH_PARENT CST_ASIR.HIERARCHY :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
14 NESTED LOOPS ANTI PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 65 Bytes: 40,256,600 Cardinality: 37,448
11 HASH JOIN PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 65 Bytes: 6,366,160 Cardinality: 37,448
8 BUFFER SORT PARALLEL_COMBINED_WITH_CHILD :Q1002
7 PX RECEIVE PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 1 Bytes: 214 Cardinality: 2
6 PX SEND BROADCAST PARALLEL_FROM_SERIAL SYS.:TQ10000 Cost: 1 Bytes: 214 Cardinality: 2
5 INDEX FULL SCAN INDEX CST_DSA.IDX$$_06EF0005 Cost: 1 Bytes: 214 Cardinality: 2
10 PX BLOCK ITERATOR PARALLEL_COMBINED_WITH_CHILD :Q1002Cost: 63 Bytes: 2,359,224 Cardinality: 37,448
9 MAT_VIEW ACCESS FULL MAT_VIEW PARALLEL_COMBINED_WITH_PARENT CST_ASIR.HIERARCHY :Q1002Cost: 63 Bytes: 2,359,224 Cardinality: 37,448
13 TABLE ACCESS BY INDEX ROWID TABLE PARALLEL_COMBINED_WITH_PARENT CST_DSA.HIERARCHY_MISMATCHES :Q1002Cost: 0 Bytes: 905 Cardinality: 1
12 INDEX RANGE SCAN INDEX PARALLEL_COMBINED_WITH_PARENT SYS.HIERARCHY_MISMATCHES_IDX3 :Q1002Cost: 0 Cardinality: 1
16 INDEX RANGE SCAN INDEX PARALLEL_COMBINED_WITH_PARENT CST_DSA.IDX$$_06EF0001 :Q1002Cost: 1 Bytes: 5 Cardinality: 1 -
Error while executing report from Query designer
Hi All,
When I am executing from query designer, I am getting following error.
Even I can't execute it from another portal where i created source system of BI server.
But i can execute queriew from Query analyser and t-code RSRT.
When I execute from Query desinger the url is as follows.
http://XXX:00/irj/servlet/prt/portal/prtroot/pcd!3aportalcontent!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0PA_C01_Q0201&VARIABLE_SCREEN=X&DUMMY=5_
And the error is:
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Information for Administrator
To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
3. When opening any customer message on this issue, please attach:
Support Desktop Tool support info ZIP file according to note 937697,*
Required information for reproduction according to note 948490.*
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
java.lang.NullPointerException
java.lang.NullPointerException
at com.sap.ip.bi.webapplications.runtime.service.metadata.impl.MetadataAccess.getMetadataModel(MetadataAccess.java:139)
at com.sap.ip.bi.webapplications.runtime.impl.Page.getMetadataModel(Page.java:8953)
at com.sap.ip.bi.webapplications.runtime.impl.Page.normalizeCommands(Page.java:4963)
at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4473)
at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:3316)
Details: Full Exception Chain
System Environment
Server
BI Java Release: 7 - Patch level: 0000000100 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP unknown
Java Virtual Machine Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_24-b04
Operating System SunOS - amd64 - 5.10
REgards
MohanHi mohan ,
You can check these OSS notes for the issue .
1. 795699 - Customizing default error messages for HTTP
2. 807000 - Http requests are not fully read after timeout
3. 804124 - HTTP communication with XI Adapter Engine fails
Regards,
Lokesh -
Currency error while creating a bex query?
Hi all,
I am trying to create a query using multi provider. I am getting the amount display along with the word ERROR suffixed after it.
for instance:
2,850.32 ERROR
32,225.53 ERROR
6,639.45 ERROR
200.00 ERROR
I have fixed it by using NODIM() in the bex query.
But i would like to know is there any solutions apart from this. Do, i need to change any currency translation settting in the bw configuration?
thanxs
harithaHi,
When you load data into the cube, for amount key figure a currency infoobject also gets loaded, please check in the basic cube if the currency infoobject that is corresponding to the amount key figure( you can find this when you see the amount KF in either dispaly or change mode) is being updated in the cube.
if not correct he same in the update or transfer rules. and then reload the data.
After this the query should show the results correctly.
Assign Points if useful
Regards
Venkata Devaraj !!! -
Error while executing UNION ALL query
Hello everyone,
I'm executing the below query on Oracle 9.2.0.8 version.
select hdr.*
from ttl_hdr hdr, ttl_service ser
where hdr.cus_nbr = ser.cus_nbr
and hdr.dn in ('1232','2342',343','343')
union all
select hdr.*
from ttl_hdr_his hdr, ttl_service ser
where hdr.cus_nbr = ser.cus_nbr
and hdr.dn in ('1232','2342',343','343')
and I encounter following error:
ORA-01790: expression must have same datatype as corresponding expression
But instead of * if I'm specifying a list of few columns, it executes the query properly.
Can anybody tell me what the problem is ?
regards,
RossyHi,
All columns in your tables TTL_HDR and TTL_HDR_HIS are not with same data type.
I'm sure you get same error if you specify all columns that * brings.
Specify column names and use conversion function to get data type same to column from both selects.
PS: and I think this is not Application Express related
Br, Jari -
ORA-01653 error while executing a select query over DBLINK
Hi,
We have a query that is running to extract some data from a remote DB over DBLINK.
The query is failing by throwing the error "ORA-01653 -- Unable to extend.........".
Is this a problem with the "temp" tablespace of local database or is this with the "temp" tablespace of remote DB.
As far as my knowledge goes, I guess any statement , selecting data over dblink where the query is being fired actually in remote db over dblink uses the temp tablespace of that DB only and hence the problem should be with the temp tablespace of remote db only but I am not very sure about this.
Is there any chance that it can be problem with "temp" tablespace of local DB from where the query is being fired over dblink.
It would be really helpful if anyone can throw some light on this.
ThanksThe error stack will normally tell you if the exception is raised in the remote database.
You might try using the driving_site hint (see performance guide) to push work to the remote site or pull it local. It all depends on your particular query and explain plan.
Remember to use { code } (without the embedded spaces) tags to frame your code and explain plan so it remains formatted, if you post it here. -
AQ_AD_HOC221 Error while executing the infoset query
Hi Gurus,
I have created one infoset using LDB PNPCE and added custom fields to IT 0021 and 0041.
But when I am going to transaction SQ01 and selecting the selection criteria and including the fields from IT 0021
in the output. Now when I press on the output push button, I am getting the error mesage no. AQ_AD_HOC221
"Error when generating the report (see long text)."
I tried to search the forum for this error. I found out that many people are facing this problem, but could not find any exact solution. One more point, when I am selecting only one custom field from the IT0021, it is working well. But when I am selecting
more than one custom fields from IT0021, it is giving me the above error.
Waiting for your replies since I need to solve it urgently.
Thanks in Advance,
RaveeshHi Raveesh;
Usually this error it's because you have a problem in Query Program (SE38) with parameters.
For example: Duplicated parameter.
Check it!!
Regards,
Mariano -
Error while executing Bex Query
Hi all,
i am getting error while executing the Bex Query.i am able to change and save the Query without any issues.
Error:
<internal error> Receiving from the BW server failed.BW server raised exception:SYSTEM_FAILURE
Do you want to see more information?
YES--->Syntax error in Program SAPLY05BW_ISA
Details:
Error Group
RFC_ERROR_SYSTEM_FAILURE
Message
Syntax error in program SAPLY05BW_ISA
What could be the problem?pl help me out!
ThanksHi,
Try this:
Execute the report RSFTP005 in BIW.
With rgds,
Anil Kumar Sharma .P -
Error while executing BexQuery
Hi all,
I am getting the following error while executing a Bex Query.
SQL Error: 16
SQL Error: 0
Error while reading data; navigation is possible
Can you let me know of any inputs regarding the same ?
Regards
Snehith.hi snehith,
Check whether your infoprovider on which this query is build contains invalid Chars.
thanks -
Error while executing BEx Query on Composite Provider
Hi,
We have a BW on-HANA system, patch level SAPKW73105.
We have created a Composite provider based on the union of two DSOs, two infoobjects, one SPO, and there are a couple of joins with two other DSOs, on the top of that we built a BEx query.
While executing the BEx query, sometimes (depending on the filter values), We got the following error message
"Attribute engine failed;Error executing physical plan: exception 6900: AttributeEngine/Parallel/DimensionFilter.cpp engine failed; $function$=getValidFemsPA;"
"Error 6,900 has occurred in the BWA/SAP HANA server"
"Error reading the data of InfoProvider @3ZSDRPCP5"
"Error while reading data; navigation is possible"
"Row: 59 Inc: MAP_TREX_EXCEPTION Prog: CL_RSDRH_TREX_STORAGE"
(Attached error message)
Ii We browse the composite provider data using the "display data" option in the RSA1, data is displayed without issue, the problem only appears during the BEx query execution and only with some filter vaues.
Any idea on how to fix the issue.
Thanks,
FedericoHe's on 7.3 EhP1, which is on SPS12 today. It got pretty stable by SP08, SP09. SP05 was pretty early on, and had a lot of bugs in the HANA views.
7.4 is on SP07 like you say, and most of our customers run at least SP06 - before then, you had to apply a bucketload of SAP notes. I would recommend customers apply SP08 with care because it's a feature release so will have a bunch of new features, which will no doubt need corrections. -
Error while executing BEx query made on Multiprovider having Virtual cube
Hi All,
We are getting an error message while executing a BEX query made on Multiprovide which consist of a Virtual Infocube infocube which extracts data from APO Live Cache, the error which we get is as below
''Error Reading the data of the infoprovider ZSS_R054
Error in Substep
Errors have occured while extracting data from datasource 9A_E2E_FC2
Errors occured during parallel processing of query 4, RC:3
Error while reading data; navigation is possible''
And also when tried to execute from RSRT , it gets executed in debug mode in TRY and CATCHE
Please let us know if anyone faced a similar situation or can suggest me what to do.
Please suggest.
Thanking you in advance.
regards,
ajayHi Ajay,
Try RSRV transaction, Select All Elementary Tests, Select query, now drag both these items on the right hand pane, select your query from this popup. and execute.
Let us know what the result is.
regards,
Sree. -
Error while executing query through rsrt
hello experts,
I am facing following error while executing one HR query through rsrt.
"System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text) "
while executing query through rsrt it automatically goes to debug mode, coming out of debug mode i get the screan showing above error message.
What would be an issue?
Regards,
Nirav
Edited by: Nirav Shah on Apr 21, 2008 8:19 AMHi ramesh,
I havent kept any execlusion selection. Though i saw long text, it is like this:
"Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Notification Number BRAIN 299 "
Regards,
Nirav
Maybe you are looking for
-
Regarding open partial PR & PO MIgration
Hi All, we are doing migration for partial PR & PO. is it possible to replicate all GR , Invoice in the PO Migration. Please suggest me if there is any better method/idea for Partial PR & PO Migration. Thanks pabi
-
JSP PROBLEM...THEORETICAL QUESTION
Hi as you all know by now im quite new to jsp and have struggled so far to get something decent working but now that i have im happy :D quick question for you all... imagine this scenario. when you submit an application for something...i.e. a job...y
-
Hi. Im Tj.! I cant see chatters list in yahoo messenger chatroom. Im using MBP. Help me please.. Thanks
-
How to login into NP Identity System using ObSSOCookie?
I am using the Web Services API to Netpoint, generated by WSDL files. I have an ObSSOCookie (from IWA) which I want to use to log into Netpoint Identity System. The usual method is as follows: Authentication authN = new Authentication(); authN.setLog
-
A OAF Personalization Question
Hi, there Can Descriptive Flexfield with a value set in the OAF be changed to the style of picklist by personalization? Peter Edited by: bo**** on 2011-8-22 下午5:34