User Move stuck.....

I have a user that I moved from a post office I am consolidating. It is stuck in the process right now, currently at the retry mailbox item retrieval.
I did, before the move, a standard content/structure gwcheck before, then did one with deldupfolder, then back to standard (if duplicate folders were found) until none were found and not issues....then a gwcheck with attclip..
When requesting pending items, it lists over a 100 items, with the first being a internal search folder, listed as To-Do.
I am sure there are more than a 100.
I have tried to simply skip the next item in the list, once, to see if it was a single item holding up.
I have tried retrying the last step of the move.
I have tried restarting the entire mailbox move.
Now, my log files are showing this for MANY MANY items, when I do mailbox retry....
02:24:54 578D (TRACKMOVE) Could not '_NgwrepFixItem' (53511 0x0000d107): paynej (egw) (paynej)
Only thing that I have found as a possible solution, would be to cancel the move...by moving the account BACK to the original post office, and then attempting again after running some additional gwchecks.
Thanks for any assistance you may be able to offer.

I did a rebuild on the involved domains and postoffices
I recreated wpcsin wpcsout mslocal
On the netware server I put the in nodca in the startupfile for the
postoffice..
And now the user moves works..
"gregamy" <[email protected]> skrev i meddelandet
news:[email protected]..
>
> If you did not do checks, are *any *items coming over at all? Or are
> they all just stuck at the initial phases?
>
> If you did not do checks, and if the process started and a lot of items
> came over, and you don't do normally-scheduled checks, then it could
> just be you have some bad, stuck items. Those can be cleared easily.
>
>
> --
> Greg Amy
> GroupWise Admin
> Hartford (CT) Hospital
> ------------------------------------------------------------------------
> gregamy's Profile: http://forums.novell.com/member.php?userid=12509
> View this thread: http://forums.novell.com/showthread.php?t=438046
>

Similar Messages

  • Every user move stuck

    We will move a whole postoffice and every move is stuck with source domain
    updated

    I did a rebuild on the involved domains and postoffices
    I recreated wpcsin wpcsout mslocal
    On the netware server I put the in nodca in the startupfile for the
    postoffice..
    And now the user moves works..
    "gregamy" <[email protected]> skrev i meddelandet
    news:[email protected]..
    >
    > If you did not do checks, are *any *items coming over at all? Or are
    > they all just stuck at the initial phases?
    >
    > If you did not do checks, and if the process started and a lot of items
    > came over, and you don't do normally-scheduled checks, then it could
    > just be you have some bad, stuck items. Those can be cleared easily.
    >
    >
    > --
    > Greg Amy
    > GroupWise Admin
    > Hartford (CT) Hospital
    > ------------------------------------------------------------------------
    > gregamy's Profile: http://forums.novell.com/member.php?userid=12509
    > View this thread: http://forums.novell.com/showthread.php?t=438046
    >

  • Ihave a movie stuck in itunes on ipad for 3 weeks taking up 7 gigs.I deleted it from the videos app but it is still there.I also tried deleting from itunes on the pc but it does not appear there.Thanks

    Ihave a movie stuck in itunes for 3 weeks taking up 7 gigs of memory.I deleted it from the videos app but still remains on the ipad.I also tried deleteing it from itunes on the pc but it does not appear there.Dont want to reboot the ipad if possible .Thanks

    That list includes all the apps that you installed to your device directly from iTunes on the computer, or which were purchased on the iOS device and subsequently transferred to iTunes on the computer.
    If you right click on any item in that list and choose "Show in Windows Explorer" it will open your iTunes application installer directory on your computer, which should be:
    C:\Users\User\Music\iTunes\iTunes Media\Mobile Applications
    In there are all your saved application installers (*.ipa files).  You need to delete those actual installer bundles and then make sure to NOT allow the "transfer purchased content" when you sync or backup in iTunes (as that will just put them back on your hard drive).
    One caveat to removing those, is that if you ever wish to keep a specific release of a particular app, and the developer replaces the iTunes/App store version with something else, your sole source for your older version will be your own stored copy of it.  So for example, when PDF expert released their iOS 7 update, and charged everyone full price for it, if you wished to keep using the previous version on your own devices, then you needed to keep a copy of the installer on your own computer as that older version is no longer available in the store front.

  • Tracking User Move

    Good day,
    It has been awhile since I have had to monitor a GroupWise system, my last customer migrated to Google, and I'm a bit out of practice. Basically I'm being asked to track an administrator's move of a GroupWise user, from one location to another, and I just want to double check the process for tracking a user move? Thank you
    -D

    Originally Posted by dschaldenovell
    Good day,
    It has been awhile since I have had to monitor a GroupWise system, my last customer migrated to Google, and I'm a bit out of practice. Basically I'm being asked to track an administrator's move of a GroupWise user, from one location to another, and I just want to double check the process for tracking a user move? Thank you
    -D
    Two places you can track what's happening:
    1) In the logs (make sure POA logging is set to verbose) of the source and destination PO.
    2) ConsoleOne, in the main menu bar select "Tools" > GroupWise Utilities > User Move Status.
    The first one will show more detail but will need to be monitored realtime and you also get other log items coming through at it's the general log. It's useful though to see how the move is progressing and how many items are still left to move and detail if any errors pop up.
    The second one if useful to see in which phase the move is in (the different stages of it's progress or move complete) and can also be used to nudge stuck moves or see which items are pending/stuck.
    Cheers,
    Willem

  • How do I create a new user, move my old files etc over, and delete old user

    This is why I think I need to.
    My computer got hit by lightening, and I may have created a new user account through netinfo rather than system preferences /accounts/+user. Mail used to open twice, but no longer. Now, Safari askes me for my keychain password twice, Spotlight can't find a folder on the computer when the search is restricted to folder and computer, though the folder is there and easyfind finds it, and when System Preferences/Spotlight/Privacy has the hard drive icon added, then deleted, Spotlight still does not find anything. (Yes, everything is backed up, on CD, DVD, and online.) Microsoft Tec Support says
    "Here is a summary of the key points of the case for your records.
    When you contacted us on August 8, you had requested assistance with Microsoft Office 2004, as your installation of the updates was unable to find the correct version of the software to update. After creating a New MAC User, we identified the issue to be with a corrupt MAC User account, and not a Microsoft issue. "
    I believe Microsoft. So, creating a new user was easy.
    But copying files uses up too much hard drive (movies, music), and may miss keychains, preferences, mail, address book, and documents. Since Spotlight no longer works, who knows what is happening. (Yes, I've repaired persmissions, and disk repair. No change). I'm using up my hard drive trying to move files to the new user. If I share files, or put them into a public folder, then delete the old user, will I still have the old user's files in the new user's account? It is not clear to me what I should be trying to do in order to create a new user, move my old files etc over, and delete old user. Thanks.
    My responses will be slow, because I have to drive to town to use the internet. I've ordered a new airport which may take care of that problem. SO be patient.

    Hey -
    I need to do the EXACT same thing, but have no idea how. Has anyone out there done this?
    My situation is a tad different..this is a new Mac (and I'm a brand new Mac user). Tons of querks occur under my original account (videos won't run, Safari won't support certain plug-ins). I spent 6 hours on the phone w/ 4 different Apple Reps and nobody could fix it. A rep finally looked at my MacBook Pro in person today. He created a new account just to see if that would work and under that new account, everything works perfectly fine (no querks, can view video). He tried switching a million settings in my original account to no avail.
    He said to create a new account (as he did) and move my files over to the new account and then go back to the original and delete it. How do you do this?! I can't figure it out! I've got a new account created, but of course it just has the default folders in it w/ the little red icons next to them! Thanks in advance!

  • I have a movie stuck in the Itunes que, how do I remove it?

    I have a movie stuck in the Itunes que, how do I remove it. Repeated requests to continue with the download fail.

    Try a reset. Press and hold both the home and power buttons 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPhone starts on it's own.

  • EP 6.0 SP2: Users move in Corporate LDAP,

    Hello,
    my corporate LDAP was changed. All the users moves from O=x to O=y. Now no user can login.
    When i add the new users to the Portal, they lost there personel settings.
    Is it possible to manipulate the Database? Or ist their any other trick?
    Stephan

    Hi Stephan,
    if you move users in your LDAP-Directory you loose the role assignments because the roles are assigned to the DN (Distinguished Name) of the user. i.e: CN=user1, O=x, C=DE. So when you move the users from O=x to O=y the DN of the users changes and so the role assignment becomes invalid.
    There is the possibility to change the uniqueID of users in the UME, so that it's not the DN but the CN, which in your case remains the same. You can do this be changing the attribute mapping in the UME.
    More infos you can find here: http://help.sap.com/saphelp_ep60sp2/helpdata/en/b6/8b9aed8d7c11d5bdd8006094191908/frameset.htm
    Be aware that if you change the uniqueID to CN you should also take care of the fact that the CN must be unique in the LDAP tree you use for the portal users. Also, a.f.a.i.k., after this change the Directory can only be integrated read-only.
    Hope that helps,
    Robert

  • MacBook Pro with SSD that has a limited disk space (120GB). Rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.

    I'm using MacBook Pro with 128GB SSD that has a limited disk space. As we know, when rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.
    My question is, Is there any method to get the rendering Projects file saved into an external hard drive which is connected with USB/ Thunderbolt/ Firewire, with huge disk space (eg. 500GB HDD).
    Now, new project created in my Mac is automatically saved in (User/Movies/Final Cut Projects) and my Mac has ran out of space to hold the files.
    Thank you.

    You have at least 3 different ways to show the project library:
    1) Go to WIndow->Show Project Library
    2) Click the button in bottom left of your window: 
    3) Hit the keyboard shortcut (Command-0)
    The project library will be shown, occupying the area where the timeline usually is.
    Your hard disks will be visible. Click the hard disk where you want the new project to reside and hit Cmd-N to create a new project.

  • User moves mouse out of dial while turning it

    I have a user interface problem. I'm using dials to control scrolling and zooming in a graph. But it's very easy, as a user, to click in the dial and start dragging to turn it, but end up outside the dial. And then the dial never gets the Mouse Up event. I consider this a real oversight in the GUI toolkit design; most GUI toolkits always give a mouse-up to the object that got the mouse-down, regardless of where the mouse may be when the button is lifted.
    But I'm stuck with what I've got. Has anyone found a nice way of dealing with this problem? Because sometimes scrolling the graph means loading new data from a file, and that is way too time-consuming to do dynamically every time I get a Mouse Move event.
    Ken

    See the attached - as Ravens Fan says, the pane mouse-up event can be your friend.
    I set a flag in the value change event to indicate when new values are arriving, but do no processing. When the mouse is released, the new value is displayed, but only if the new data flag is true. This means that the relevant code is executed regardless of where the user ends up with the mouse and only if they have changed the dial.
    Attachments:
    dial-mouse up event.vi ‏16 KB

  • User Move Error

    Hi all its that time of year again when I am moving teachers around to different schools. Yesterday I moved about 10 with no problem but 2 gave me a d70e duplicate entry error. One of the two I know I have moved before so I suspect something went wrong last time and I didnt notice but the other one was created in my building 2 yrs ago and is now moving to a school so Im stumped both with what happened and how to fix it. The first user I managed to get back to her original post office and it looks ok now but Im a little leary of trying again.
    The second one is stuck now like this:
    the master domain thinks the user is in the original post office but has operations pending so I cant do anything with her (although c1 shows no pending operations or moves on that domain).
    the source domain shows her in the source po with the d70e error (which I have tried to clear but seems to come back)
    the destination domain shows her in the dest po greyed out
    I have tried following TID 7005789 but i am not sure what to do at step 6, do I remove the users email account completely and then re-create it with the same fid or am I missing something. Without doing the last step Im in the same spot I described above.
    Can anyone give me some advice on what to do/try next?
    thanks
    Mark

    Originally Posted by laurabuckley
    Hi Mark
    Does the user have a gateway alias or any nicknames associated with their account?
    https://www.novell.com/support/kb/doc.php?id=7005701
    Cheers,
    No neither user that has given me problems has an alias.

  • Mailbox Move stuck on StatusDetail Relinquished

    Hi,
    I am trying to do mailbox moves from Exchange 2010 SP3 to Exchange 2013 CU5. This morning they were working great for a few users with no issues. Mailboxes were about 1GB. 
    Now when I move a mailbox it goes into a StatusDetail of Relinguished and does not proceed past 0%
    What does this status mean? Should i restart the Mailbox Replication Service? I was not sure about restarting the service as I have live users and dont want to disconnect them from their mailboxes..
    Please help..

    Hi,
    Per my known, online mailbox moves are supported between Exchange 2010 databases and between Exchange 2007 SP3 and Exchange 2010 databases.
    If you move mailbox in Exchange 2013, users can't access their mailboxes during mailbox move. I recommend you migrate mailbox off business hours.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Mailbox move stuck

    Hello,
    I'm trying to move mailboxes from Exchange 2007 to 2013. The move request seems to be stuck in the "Syncing" mode.
    Exchange 2007 environment consists of CAS and MBX servers, Exchange 2013 has both roles on the same machine.
    Mail traffic between servers, to/from internet works without issues.
    Where would I start to troubleshoot it?
    Thanks.
    Memento Mori

    Have increased diagnostic logging for mailbox move:
    Set-EventLogLevel -Identity "MSExchange Mailbox Replication\Mailbox Move" -level high
    Set-EventLogLevel -Identity "MSExchange Mailbox Replication\Service
    " -level high
    Getting the following exception:
    2014-01-05T03:07:29.678Z,15,MigrationServicelet,Information,",a19d0cec-1b9b-472f-b849-5cd6f8a065d1,1,","Job type ExchangeLocalMove, status SyncStarting, result Working, length 0.5739226, job 1:a19d0cec-1b9b-472f-b849-5cd6f8a065d1:ExchangeLocalMove:Staged:4:[email protected]:SyncStarting:1/5/2014
    1:26:13 AM::"
    2014-01-05T03:07:34.732Z,15,MigrationServicelet,Information,",,",ProcessCacheEntry: beginning processing /o=test/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=b31d04e95d224880be9d3330b66dddef-Migra
    2014-01-05T03:07:35.372Z,15,MigrationServicelet,Information,",a19d0cec-1b9b-472f-b849-5cd6f8a065d1,1,","Job type ExchangeLocalMove, status SyncStarting, result Working, length 0.5744619, job 1:a19d0cec-1b9b-472f-b849-5cd6f8a065d1:ExchangeLocalMove:Staged:4:[email protected]:SyncStarting:1/5/2014
    1:26:13 AM::"
    2014-01-05T03:07:40.427Z,15,MigrationServicelet,Information,",,",ProcessCacheEntry: beginning processing /o=test/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=b31d04e95d224880be9d3330b66dddef-Migra
    2014-01-05T03:07:41.066Z,15,MigrationServicelet,Information,",a19d0cec-1b9b-472f-b849-5cd6f8a065d1,1,","Job type ExchangeLocalMove, status SyncStarting, result Working, length 0.589772, job 1:a19d0cec-1b9b-472f-b849-5cd6f8a065d1:ExchangeLocalMove:Staged:4:[email protected]:SyncStarting:1/5/2014
    1:26:13 AM::"
    2014-01-05T03:07:46.136Z,15,MigrationServicelet,Information,",,",ProcessCacheEntry: beginning processing /o=test/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=b31d04e95d224880be9d3330b66dddef-Migra
    2014-01-05T03:07:46.745Z,15,MigrationServicelet,Error,",a19d0cec-1b9b-472f-b849-5cd6f8a065d1,1,[email protected]","MigrationJobItem.SetTransientError: job a19d0cec-1b9b-472f-b849-5cd6f8a065d1:[email protected]:Syncing,   at Microsoft.Exchange.Migration.MrsAccessorBase.HandleException[T](String
    commandString, Exception ex)    at Microsoft.Exchange.Migration.RunspaceAccessorBase.HandleException[T](String commandString, Exception ex, ICollection`1 ignoreExceptions)    at Microsoft.Exchange.Migration.RunspaceAccessorBase.RunCommand[T](PSCommand
    command, ICollection`1 ignoreExceptions)    at Microsoft.Exchange.Migration.MrsMoveRequestAccessor.RetrieveSubscriptionSnapshot(ISubscriptionId subscriptionId)    at Microsoft.Exchange.Migration.MrsMoveRequestAccessor.RetrieveSubscriptionStatus(ISubscriptionId
    subscriptionId)    at Microsoft.Exchange.Migration.SubscriptionHandlerBase.<>c__DisplayClass3.<GetJobItemsForActiveSubscriptionCheck>b__2()    at Microsoft.Exchange.Migration.ItemStateTransitionHelper.RunBatchOperation(MigrationJob
    job, IEnumerable`1 jobItems, IMigrationDataProvider dataProvider, Nullable`1 failedStatus, Action batchOperation)||Microsoft.Exchange.Data.Storage.Management.MigrationTransientException|Couldn't find a move request that corresponds to the specified identity
    'domain.loc/Admins/test'.|InnerException:ManagementObjectNotFoundException:Couldn't find a move request that corresponds to the specified identity 'domain.loc/Admins/test'.|Microsoft.Exchange.Configuration.Tasks.ManagementObjectNotFoundException: Couldn't
    find a move request that corresponds to the specified identity 'domain.loc/Admins/test'.    at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.GetDataObject[TObject](IIdentityParameter id, IConfigDataProvider session, ObjectId rootID, OptionalIdentityData
    optionalData, Nullable`1 notFoundError, Nullable`1 multipleFoundError, ExchangeErrorCategory errorCategory)    at Microsoft.Exchange.Configuration.Tasks.RecipientTaskHelper.ResolveDataObject[TDataObject](IConfigDataProvider dataSession, IConfigDataProvider
    globalCatalogSession, ADServerSettings serverSettings, IIdentityParameter identity, ObjectId rootId, OptionalIdentityData optionalData, String domainController, CategorizedGetDataObjectDelegate getDataObjectHandler, TaskVerboseLoggingDelegate logHandler, ErrorLoggerDelegate
    errorHandler)    at Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics.InternalProcessRecord()    at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()|"
    2014-01-05T03:07:46.745Z,15,MigrationServicelet,Warning,",a19d0cec-1b9b-472f-b849-5cd6f8a065d1,1,[email protected]",Set TransientError: Syncing:1/5/2014 2:41:56 AM:Couldn't find a move request that corresponds to the specified identity 'domain.loc/Admins/test'.
    --> Couldn't find a move request that corresponds to the specified identity 'domain.loc/Admins/test'.: count 10 original time 01/05/2014 02:41:56
    2014-01-05T03:07:46.760Z,15,MigrationServicelet,Warning,",a19d0cec-1b9b-472f-b849-5cd6f8a065d1,1,[email protected]","NotifyOfTransientException:   at Microsoft.Exchange.Migration.MrsAccessorBase.HandleException[T](String commandString, Exception ex)  
     at Microsoft.Exchange.Migration.RunspaceAccessorBase.HandleException[T](String commandString, Exception ex, ICollection`1 ignoreExceptions)    at Microsoft.Exchange.Migration.RunspaceAccessorBase.RunCommand[T](PSCommand command, ICollection`1
    ignoreExceptions)    at Microsoft.Exchange.Migration.MrsMoveRequestAccessor.RetrieveSubscriptionSnapshot(ISubscriptionId subscriptionId)    at Microsoft.Exchange.Migration.MrsMoveRequestAccessor.RetrieveSubscriptionStatus(ISubscriptionId
    subscriptionId)    at Microsoft.Exchange.Migration.SubscriptionHandlerBase.<>c__DisplayClass3.<GetJobItemsForActiveSubscriptionCheck>b__2()    at Microsoft.Exchange.Migration.ItemStateTransitionHelper.RunBatchOperation(MigrationJob
    job, IEnumerable`1 jobItems, IMigrationDataProvider dataProvider, Nullable`1 failedStatus, Action batchOperation)|transient error occurred for job items:a19d0cec-1b9b-472f-b849-5cd6f8a065d1:[email protected]:Syncing||Microsoft.Exchange.Data.Storage.Management.MigrationTransientException|Couldn't
    find a move request that corresponds to the specified identity 'domain.loc/Admins/test'.|InnerException:ManagementObjectNotFoundException:Couldn't find a move request that corresponds to the specified identity 'domain.loc/Admins/test'.|Microsoft.Exchange.Configuration.Tasks.ManagementObjectNotFoundException:
    Couldn't find a move request that corresponds to the specified identity 'domain.loc/Admins/test'.    at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.GetDataObject[TObject](IIdentityParameter id, IConfigDataProvider session, ObjectId rootID,
    OptionalIdentityData optionalData, Nullable`1 notFoundError, Nullable`1 multipleFoundError, ExchangeErrorCategory errorCategory)    at Microsoft.Exchange.Configuration.Tasks.RecipientTaskHelper.ResolveDataObject[TDataObject](IConfigDataProvider dataSession,
    IConfigDataProvider globalCatalogSession, ADServerSettings serverSettings, IIdentityParameter identity, ObjectId rootId, OptionalIdentityData optionalData, String domainController, CategorizedGetDataObjectDelegate getDataObjectHandler, TaskVerboseLoggingDelegate
    logHandler, ErrorLoggerDelegate errorHandler)    at Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics.InternalProcessRecord()    at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()|"
    Memento Mori

  • Mass user movement from one org. unit to another in SRM org. structure

    Hi,
    Is there any way by which i can move mass users from one organisational unit to another in SRM org. structure..
    there is a thread available in SDN but it is not conclusive. it talks abt using a FM: BBP_USER_CHANGE_ORG
    BR
    Bharat M

    Bharat-
    I am assuming that your requirement is to move mass users from One Org node to another. Ex One Plant Org node to Another plant Org node.
    If my assumption is correct then, please follow the below steps.
    1) Go in to the change mode of Org Plan using T-code PPOMA_BBP
    2) Using shift key, select all the users that you need to move.
    3) Drag and Drop the selected users to the desired Org node.
    If the user IDs are not in sequence then you can use Ctrl key to select the relevant user ID.
    Let me know if you have any questions.
    If the answer is helpful, please reward points.
    Regards,
    Upendra.

  • Win 7 client with machine and user auth stuck in 802.1x_REQD

    Hi everybody
    we have a WLC 5508 with 7.2.110.0 and an ACS 5.3 and do the following:
    - Win 7 client gets a GPO object with the wlan configuration for "Machine and User authentication" with PEAP
    - On ACS 5.3 I configured correctly the authentication and authorization for first machine authentication and then user authentication ("Was machine authenticated = true)
    - First when machine authentication happens, the client is configured into a quarantine VLAN, where it is only allowed to communicate with the domain controllers
    - When the user authenication happens, the client is moved into the productive client vlan with no restrictions.
    Everything works fine, except that after the user loggs in, it takes about 3 minutes until the client answers the EAP Identity Request and loggs in, see attached screenshot or the screenshot below:
    In the client status on WLC i can see that the client is stuck in the 802.1x_REQD state for these 3 minutes, until suddenly it authenticates (but then very often, about 5 times - see screenshot).
    We tried the following to find the problem spot. but we were not able to locate the problem:
    - Configure the machine and user authentication into the same vlan all the time
    - ONLY user authentication on the client
    - Played with the Win 7 settings (timers, and so on)
    - When we manually configured the WLAN profile on the Win 7 client and saved it, the Win 7 client connected to the SSID without any problems and without any delay (about 5 seconds after the save)
    Did someone ever had the same issue?
    Thanks a lot and best regards
    Dominic

    Hi Amjad
    very good point on this, thanks a lot. In this case, I did not even think about the client firmware side, thought that I should be the WLC or the client settings, but not the driver. We will give a shot on this next week, maybe this will help us to solve the problem.
    It is normal to have the clietn in 802.1x_REQD if it is not yet authenticated and that is the expected state to be at in your situation untlil the client fully authenticates.
    Absolutely correct that the client is associated and in the 802.1x_REQD state as long as the authenticator did not get the EAP identity Response, but that the client takes such a long time to answer is not normal ;-)
    - What is the supplicant that is used on the windows machines? default WLAN supplicant? or you use some commercial supplicants?
    WZC.
    - what is the result when testing with user auth only?
    The same, it takes such a long time.
    - what ist he result when testing with machine auth only?
    Machine authentication works as expected, fast and as soon as the client is booted, the client gets authenticated.
    Regards and have a nice weekend
    Dominic

  • User Move Errors

    I have moved a user, and the move is complete, but I'm still getting an
    error on the POA that the user started from. Here is the message I'm
    getting:
    (.Move) Purging User Data: jdoe (xyz)
    (.Move) Command ignored - move operation NOT in progress: jdoe (xyz)
    I'm also seeing this message, but I'm not sure it is related (I am
    moving other users as well, and this may be from one of them).
    *** Error Replication Message: D107 - 7
    The user jdoe has completed the move, and shows up on the new post
    office. What can I do to stop these errors coming up?
    Doug

    Doug,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

Maybe you are looking for