User Name and Password screen

We are currently trying to access an application but receive a pop-up window prompting for the Network user name and password. I don't want this to occur for the application. Can you please tell me where I have set this up and how to remedy this problem. I am using WebLogic 5.1 sp 5 and accessing the server via a NSAPI plug-in on a iPlanet 4.1 sp 7 server. Thanks,Stephanie Lester

Do you have a LDAP server? or did you activate the security on Weblogic?
Does your I-planet has activated the security?
Stephanie <[email protected]> wrote:
We are currently trying to access an application but receive a pop-up
window prompting for the Network user name and password. I don't want
this to occur for the application. Can you please tell me where I have
set this up and how to remedy this problem. I am using WebLogic 5.1
sp 5 and accessing the server via a NSAPI plug-in on a iPlanet 4.1 sp
7 server. Thanks,Stephanie Lester

Similar Messages

  • Trying to install Leopard on my iMac (G5).  Got to the screen that asks for the user name and password and it won't take it.  How do I get out of this and resume the software install?

    Trying to install Leopard on my iMac (G5).  Got to the screen that asks for the user name and password and it won't take it.  How do I get out of this and resume the software install?

    Help here >  Mac OS X: Changing or resetting an account password

  • I upgraded to lion. I now have the spinning wheel on the startup screen when I try to enter my user name and password. I tried shutting down and restarting, no luck

    I upgraded to lion. I now have the spinning wheel on the startup screen when I try to enter my user name and password. I tried shutting down and restarting, no luck

    Reinstalling Lion Without the Installer
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • I receive an error stating user name and password are not valid on my ipad and iphone 3Gs when attempting to load email from my icloud account. When I log onto icloud from my Mac, it wont load the email either.

    One day, my ipad and iphone pick up my emails (.mac account) from icloud just fine. the next day, I recieved error messages that say my user name and password are not accurate. I removed the icloud program on both devices and added it back on to both devices and get the same message. I logged into icloud from my Mac and while I can log in, it times out when I select email and wont load the email there either. Any Suggestons?

    I am having the same problem; it started about 24-36 hours ago.
    I know my ID/PW combo are correct because I can access all other aspects of iCloud except mail.
    iPhone -- returns incorrect ID / Password
    iPad -- Same
    Mail.app on Mac -- returns incorrect password error
    icloud.com -- allows me to log in and use all functions accept mail.  When I try to use mail it stays on a white screen for about 60 seconds then returns a dialogue box that indicates a server error.
    I contacted Apple and they placed my iCloud account into something called "Troubleshooting" mode.  They generated a new strong password and sent it on to "Engineering."
    I suspect there are a small number ofo users like you who are affected with the same problem I am.  Too small a number for it to be reported as an outtage.  I suggest you call Apple and open a case to have your mail investigaged.
    Hope this helps...

  • How can I hide the user name and password from the url address?

    Good afternoon every body,
    I have a form running with Oracle9i Developer Suite Release 2 and when I run the form on the web it shows the user name and password of my data base. Can anyone of you please help me to hide the user name and password, if there's any way of course?.
    Thanks a lot!!.

    Luis,
    Then, as inolau's notice, create logon screen (or use the default one) and force the users to logon at runtime. Do not pass username/password as parameters.
    inolau,
    True that if the connection is specified in the config it will be the same for everyone. However, every case is different. For example one of our apps gets S3 credentials (from non-Oracle S3) as session parameters. It uses this common db connection to validate some stuff with the database, read security definitions and then it re-connects the forms using the credentials.

  • After updating to iOS 8 my iPad 2 does not keep my user name and password for isp start page

    After updating to iOS 8 my i pad 2 does not store the user name and password for my earthlink start page.  In past could go to bookmark and the start
    page would automatically come up.  Now I must enter the user name and password every time to access the personalized start page.  tried to find some settings that needed changing but no luck.  is this a problem with iOS 8     Earthlink referred me to apple   they could not help    any help here

    Hello nkrlw,
    It may be that AutoFill is disabled in Safari, or that Private Browsing is on.
    Go to Settings > Safari > Passwords & AutoFill and make sure that Names and Passwords is on.
    Go to your Home screen and open Safari. If Safari is black or dark instead of white or gray, Private Browsing is on. Safari doesn't save account names and passwords when Private Browsing is on. To turn off Private Browsing:
    On iPad, tap the the plus icon in the upper-right corner of the Safari page, then tap Private in the lower-left corner.
    On iPhone and iPod touch, tap  in the lower-right corner of the Safari page, then tap Private in the lower-left corner.
    Get help using iCloud Keychain
    http://support.apple.com/kb/TS4644
    Cheers,
    Allen

  • I dont know apple ipod touch id-user name and password, how do i create or purchase

    i dont know apple ipod touch id-user name and password, how do i create or purchase
                                             this is arockiarajfrompondicherry.

    What do you mean 'don't know apple iPod touch id-useer name and password, how do I create or purchase' ? What are you seeing on your iPod's screen, and what are you trying to do ?
    If your iPod is on the activation screen then you will need to type in the account id and password of the account that it's locked to : http://support.apple.com/kb/PH13695
    If you want to create a new iTunes account : iTunes: How to set up an Apple ID within iTunes.
    Or to create an account without giving credit card details : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method.

  • Repeated requests for user name and password

    I am suddenly getting repeating requests to provide my user name and password but the requesting screen already has this information filled in. Each time I press OK the request returns. Is this a server problem?
    Solved!
    Go to Solution.

    A quick look through this board will reveal that this has been an intermittent problem with BT Yahoo! for ages and is one of the reasons are moving to a new BT Mail (which itself has stalled because of problems). Meanwhile, logging in direct to webmail then out again has been known to overcome the password issue.
    You can click the white star next to this message if you think it was helpful.

  • HT201412 My iPad says my hotmail account user name and password are incorrect.  It is frozen with that text box.

    My iPad is stuck on the picture frame.  The text box in the middle says my hotmail user name and password are not correct.  No matter what I do, I can't get beyond this box.  The control button at the bottom does nothing.  I cannot choose another application.  Has anyone had this problem?

    Try this:
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings  (or for network connection issues 'reset network settings').
    (no media or data will be deleted from the device, this will only take a minute).

  • PowerBook G4 boots to unfamiliar login. List of known user accounts does not appear and original admin user name and password is rejected. What is going on here?

    PowerBook G4 boots to unfamiliar login. List of known user accounts does not appear and original admin user name and password is rejected. What is going on here?

    There are no children, nor other suspicious characters that have "played" with my computer. One moment I'm in, the next time I turn on/restart the powerbook I'm at a screen with the name of the hard drive and two fields: username and password. Not a list with pictures and names ie 'Katie Jo' with an orange icon and 'Guest' with a silhouette of a head.
    In an attempt to remedy this problem, I backed up files using target disk mode and firewire cable. I then, rebooted in single user mode, typed in the correct script and essentially made the computer appear virgin again. Original start up welcome screen display with multiple languages, and then set up prompts such as language, network, and registration. After completing the cues and the "just a few more questions" page, I press continue and am left at a grey standstill, with the continue button greyed out, and no other actions. I'm only able to "go back" by clicking the go back button, all the way to the beginning of the set up, and as I proceed through the steps a second time, I'm greeted with the same halt. What is this?

  • Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?

    Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?

    Try this:
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings  (or for network connection issues 'reset network settings').
    (no media or data will be deleted from the device, this will only take a minute).

  • IPad 4 asks for User Name and Password to access home wi-fi network

    I have the iPad 4, which occasionally fails to connect to my home network and will ask me for both an User Name and Password to access my home wireless network. I have no idea what would constitute an User Name and I have tried the name of the network and other options to no avail. When I close down the iPad and take it closer to my Wi-Fi Router (BT Home Hub 3) then switch back on it asks for the password only as normal and all is well. What concerns me is this only happens on the occasional basis, but I am trying to access the router from exactly the same place.
    Is there a fault with the wireless function on the iPad? I have contacted Apple Support by telephone and they were very helpful to be fair, but they had not come across this issue before.
    Has anyone experienced anything like this and could advise me? My other option would be to email Apple Support, but I cannot find an email address for Apple Technical Support UK.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HP 8600 User Name and password

    HP service is not good.  I need to find/reset my user name and password...wont allow me to scan to email...how do this?

    Hello tfurey58,
    Welcome to the HP Forums.
    If you would like to reset the user name and password on the printer, the easiest way to do this would be to Restore Network Defaults on the printer.
    From the home screen on the printer, use the right arrow key and go to the Setup menu. Navigate to the Network Menu and then scroll down the menu until you see Restore Network Defaults.  Follow the prompts to restore the network.  Once it is complete, you will then need to go through the Wireless Setup Wizard.
    You will be prompted to in put a user name and password once again to gain  connection to the network.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • How do I recover lost user name and password

    I cannot log in to eprinter I forgot my user name and password. how can I resolve the problem?

    Try using the forgot password link when you are on the sign in screen. The username is always the email address you registered with, so put your email in and it should send a password reset link. If you have multiple email addresses and dont remember which one you used try this with each email until you get a reset link.
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

Maybe you are looking for