User Name and Password to file share OSX and Vista
I have just bought a Laptop running VISTA for work. I want to share files between my i-mac and the lap top. I have managed to share from MAC > Vista but can not log onto the MAC from Vista.
I map the drive using \\192.168.2.2\kemery and am then prompted for a user name and password so enter my MAC short name and password (administrator). The log on fails and returns "unsucessful" with the user name filled in as
KeithEmery-PC\kemery. I have tried changing it to WORKGROUP\kemery but nothing seems to work.
Please help - this is the last task on an otherwise simple setup!
I left off the \\ that is before the 192.168.2.2 and it worked just fine for me. But I am using Vista Ultimate and this may or may not make a difference. Ultimate is suppose to have easier Networking set - up
I map the drive using \\192.168.2.2\kemery and am
then prompted for a user name and password so enter
my MAC short name and password (administrator). The
log on fails and returns "unsucessful" with the user
name filled in as
KeithEmery-PC\kemery.
Similar Messages
-
Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
ThanksIt is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.
-
We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.
About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone. Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc. This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...
-
My iPad receives email on the hotel wifi but will not send. The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged. Restarting iPad did not help.
I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message. I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message. Is there some trick to this? Very frustrating!
-
email was hijacked and spam/virus link sent out to all of my contacts on wed at 4:21AM..... with the Subject as Rep: My Name or My email address and a link to a web page discussing making money working at home. Could not get into any of my mail, on the web or on Mail on my mac. After a phone call to automated support through Yahoo through ATT, I was given a temporary password and was able to reset my Yahoo password and get email on the internet. I still cannot open my Mail Account on either my iMac or MacBook Pro. I cannot get into Mail, period. My sign in keeps popping up and it keeps telling me that my user name or password is incorrect. I tried my old password, the temporary password and the new password. Nothing is working, I cannot receive or send anything in Mail. Mail is Frozen. If I want my email, I must go to the web and sign into Yahoo Mail.
Help!When you were entering your new password in mac mail for your Yahoo account, you didn't perchance change the user name from [email protected] to just name without the @att.net? I only ask because I've done that, and att.yahoo mail requires a fully qualified [email protected] for access.
In mail, you might click on window on the menu bar, then connection doctor. On the account with the red dot next to it, it will tell you why it can't connect, and if you click on it, you'll be taken to where you can fix it. -
I keep getting error message on my I-Pad e-mail, user name or password incorrect. I reset the password with a new one and it says same thing. I have same e-mail on desktop. Same password. Any ideas?
If you can't send mail, but can receive it - Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional. -
Recently changed my apple ID. On my 3G iPhone 4 iCloud has since then been letting me know that my user name or password is incorrect. I can edit the password in iCloud account information but user name is grayed out and can't be changed to my new apple ID. Haven't been be able to fix this by going into my Apple ID account or synching the iPhone.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again. -
MacBook Pro 10.6.8 My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it. All this after a scheduled software update. Any ideas??
kwmlr439 wrote:
CSOUND Read the title please:
Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
Message was edited by: Shootist007
Message was edited by: Shootist007 -
I have entered my username and password and the message comes up as User name or password is incorrect, this has frozened this page - so I am unable to use my settings, the rest of the phone is working fine
Try "resetting" the iPhone.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears. -
gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?
paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday. Thanks a million, take care. Robert.
-
My email has been working fin. however In the last day or so when i open my email or send an email it comes up with,
The user name or password is incorrect. As far as I am aware the user name and password is correct. Can you please advise.
Declan JacksonTry going into Settings > Mail, Contacts, Calendars and select that email account and try re-typing in the account's username and password
-
I am not able to signin using apple ID in imassge and face book it says user name or password wrong plz help
I think there has been a change in the password requirements for apple ID's. I think it now needs to be eight characters long and have at least one capital letter and one number. Got to appleid.apple.com and then to manage your account and change your password to something that meets the requirements I mentioned and see if that helps
-
I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvoHi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu -
I dropped my phone yesterday and now can't receive mail. I removed and then replaced the sim card. I've restarted the phone. It says the user name or password is incorrect. I re-entered the correct information (I think) and I've also synced it with my computer. Nothing works. Help!
Delete the email account and re-enter it from scratch.
-
Each time I try to sign in to face time I receive a msg stating that the user name or password are incorrect, I visit the local agent and the told me we can not do help you , they think there's an problem with the iPad as I bought it from USA
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
Cheers, Tom
Maybe you are looking for
-
hi, I would like to request your help. I want to select some data from one table .but the table is dynamic. It is continuously changing.So what i thought is accept the tablename as parameter and then do the select from the parameter but the s
-
Message after repairing permissions on MB wit Leopard
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired. This message came after I repaired permissions on MB with Leopard - any idea what it means and is it i
-
Repeating frames...simple problem
I am new to Oracle Reports and have run into a simple issue which I am not able to fix. Suppose that Ive a table Numbers as shown below: SQL> desc numbers Name Null? Type COL1 NUMBER SQL> select * from numbers; COL1 1 2 3 4 5 Now I want to build a r
-
Help needed on integration of portal with ifs
The requirement goes like this: I use IFS for Content management. I want to publish the jsps/ htmls lying on IFS on my oracle portal page. I need ways to integrate htmls/ jsps (lying on ifs) with portal page. Any inputs are welcome Thanks 'N' Regards
-
Hello all! How can I view a PDF file in java.