User name on CRM UI interaction home page
Hi,
Can anyone please suggest me how can i put logged in user name on interaction center home page? I am using CRM 7.0.
Regards,
Kamesh Bathla
Take a look at this thread:
How to show user and system name on top of screen
Take care,
Stephen
Similar Messages
-
After updating to iOS 8 my iPad 2 does not keep my user name and password for isp start page
After updating to iOS 8 my i pad 2 does not store the user name and password for my earthlink start page. In past could go to bookmark and the start
page would automatically come up. Now I must enter the user name and password every time to access the personalized start page. tried to find some settings that needed changing but no luck. is this a problem with iOS 8 Earthlink referred me to apple they could not help any help hereHello nkrlw,
It may be that AutoFill is disabled in Safari, or that Private Browsing is on.
Go to Settings > Safari > Passwords & AutoFill and make sure that Names and Passwords is on.
Go to your Home screen and open Safari. If Safari is black or dark instead of white or gray, Private Browsing is on. Safari doesn't save account names and passwords when Private Browsing is on. To turn off Private Browsing:
On iPad, tap the the plus icon in the upper-right corner of the Safari page, then tap Private in the lower-left corner.
On iPhone and iPod touch, tap in the lower-right corner of the Safari page, then tap Private in the lower-left corner.
Get help using iCloud Keychain
http://support.apple.com/kb/TS4644
Cheers,
Allen -
IPad 4 asks for User Name and Password to access home wi-fi network
I have the iPad 4, which occasionally fails to connect to my home network and will ask me for both an User Name and Password to access my home wireless network. I have no idea what would constitute an User Name and I have tried the name of the network and other options to no avail. When I close down the iPad and take it closer to my Wi-Fi Router (BT Home Hub 3) then switch back on it asks for the password only as normal and all is well. What concerns me is this only happens on the occasional basis, but I am trying to access the router from exactly the same place.
Is there a fault with the wireless function on the iPad? I have contacted Apple Support by telephone and they were very helpful to be fair, but they had not come across this issue before.
Has anyone experienced anything like this and could advise me? My other option would be to email Apple Support, but I cannot find an email address for Apple Technical Support UK.Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Can the Supplier Name be hidden on iProcurement Home Page?
Hi,
On iProcurement (both Paragraph and Grid view), it is possible to hide the price through personalisation (Flow Layout: (QuantityFormatCell.AmountFlowLayout) rendered to False).
Is this also possible with the Supplier name? If yes, how and which layout name?
Environment is Oracle R12.1.3
ThanksNote found on Metalink saying it is not possible. Enhancement request set on that
-
Keychain won't save password when user name and password are on separate pages
I Have and iMac,iPhone and iPad. When I go on a site where the username and password are on different pages, Keychain doesn't seem to work. It won't offer a passwot, nor will it save the username and password I enter.
any suggestions?II'd rather not disclose the financial institutions i do business with, but my bank and two mutual fund websites use separate pages for username and password. I chec around, and if you go to the Bank of America website, they do it as well. Keychain does not work on any of the three sites I use.
Thanks for your help. -
I want to allow user to open a page only from the home page and not directl
Dear friends,
Can you help me in this.
My home page is using frames. In one of the frame i am calling one html page which is calling one applet. Is it possible to hide the source code of the bottom frame .
As the user types in the absolute path of the request on the address bar , he any how manages to see my source code of the html (view source) thereby the applet tag .
Can't figure it out, how to hide the source code of the bottom frame .
I read that its possible with redirecting it to some other page , but how will i know that user is not calling from the home page
Any body , who can help in this regards.
Bye
Thank'sYou can set up a javascript to prevent someone viewing the page source, but anyone web-savvy will be able to switch off javascript and see it anyways.
You could also add a request value to the second page so that you have "<a href="page.jsp?parameter=00a">" and if the parameter is not set the page will not show. That is a bit of a hack but would probably work.
Basically, don't put anything too security dependent on the client site, because once it is run on someone's computer they have access to it. -
I've tried unsuccessfully to find what names are valid html
for home pages,
"index", "default" etc. Is there a list somewhere?
RIGHT
Remove spam to email
http://righttax.orgHarvey:
Ask your host. It varies from one to the next.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Harvey Waxman" <[email protected]> wrote in
message
news:[email protected]..
> In article <giao4k$979$[email protected]>,
Dooza
> <[email protected]>
> wrote:
>
>> Dr. Harvey Waxman wrote:
>> > I've tried unsuccessfully to find what names
are valid html for home
>> > pages,
>> > "index", "default" etc. Is there a list
somewhere?
>>
>> Your default home page that is served up by your
webserver is set on
>> your webserver.
>>
>> Common ones are:
>>
>> index.htm
>> index.html
>> index.asp
>> index.php
>> default.htm
>> default.html
>> default.asp
>>
>> If your on an Apache webserver you can usually set
this using a
>> .htaccess file.
>>
>> Create one and add this line:
>>
>> DirectoryIndex index.html
>>
>> Then upload the .htaccess file to your server and
see what happens.
>>
>> If your on a Windows based server you control the
default page within
>> the IIS manager.
>>
>> If your stuck, ask your host.
>>
>> Dooza
>
>
> Not having any problems. I was just wondering what
browsers look for and
> I
> guess it is either index or default. Academic interest
only.
>
> Thanks
>
> --
> Harvey Products makers of Dinghy Dogs
> The Boater's Best Friend
>
http://www.dinghydogs.com
> Remove spam to email -
Open popup window and redirect user to home page in sandboxed solution
i've created a sandboxed solution visual webpart and it has submit button so when user fills the information in the text boxes availble in webpart and clicks submit button so I want to open popup button containg success message and ok button so when user
clicks ok button in popup window i want user to be redirected to the home page of the site.
i tried to open popup and showed success message by below code
string gotohomepage = "http://sp2013:1111/Pages/home.aspx";
ScriptManager.RegisterStartupScript(this, this.GetType(), "message", "alert('Your Record has been submitted successfully,you will be redirected to home Page shortly');location.href =
'" + gotohomepage + "';", true);
but it's not opening popup window can anyone help how do i open popup window and redirect user to home page in sandboxed solutionPage class and script manager are not supported in sandbox solution
You can create model popup to achieve this
below are the reference links
http://blogs.msdn.com/b/chaks/archive/2011/09/14/modal-dialog-box-in-sharepoint-sandbox.aspx
http://social.msdn.microsoft.com/Forums/en-US/9427db4d-60f2-4b2a-8db6-b50d01ac4f23/how-to-create-modal-popup-using-sandboxed-solution -
Table where default home page is stored
Hi,
Does anyone know which table the default home page for a user is stored in? I presumed that it would be WWSEC_PERSON$ but this doesn't seem to be the case.
All help is greatly appreciated.
Thanks,
RogerThis is stored in the customization tables. It can be got only by using APIs.
Sample Code to get the default page for the user. This returns the most specific value. That is, if the User has specified a home page Otherwise, the Group
home page if one has been specified. If neither has been specified, then use the System home page.
l_value := wwpre_api_value.get_value_as_varchar2(
p_path => 'Oracle.Portal.Page',
p_name => 'default');
Sample Code to get the home page for the given entity (a specific user,
a specific group, or the system default) at the system level
l_level_type varchar2(50) := < portal_schema>.wwpre_api_value.SYSTEM_LEVEL_TYPE,
l_value := wwpre_api_value.get_value_as_varchar2(
p_path => 'Oracle.Portal.Page',
p_name => 'default',
p_level_type => l_level_type,
p_level_name => <name of the user>
Sample Code to get the home page for the given entity (a specific user,
a specific group, or the system default) at the user level
l_level_type varchar2(50) := < portal_schema>.wwpre_api_value.USER_LEVEL_TYPE,
l_value := wwpre_api_value.get_value_as_varchar2(
p_path => 'Oracle.Portal.Page',
p_name => 'default',
p_level_type => l_level_type,
p_level_name => <name of the user>
Thanks,
Sharmila -
Issue: The user name changed when switch to other links in SCN
Hi,
I just wanted to bring to the notice of the moderators (as I don't know where can I report for the IT related issues) that for the past few days I am facing a peculiar behaviour when I log into the SCN through Internet Explorer 8.0. This is also being faced by my peers too..:)
The issue is that when I login to SCN, I can see my user name on the top of the page(Home page). But when I switch to say 'Forum', the user name is changed and this is random. I kind of have access to his/her account.
Even I try to log off, nothing happens.. The only solution left is to close the IE and then try to login again.
Kindly have a look into this issue.
Thanks in advance..:)
Regards
AmitIve (along with many others) noticed the same problem with the Forums about 2 years ago, where after log-in or clicking a certain thread I find myself in someone's else's id. And the id keeps changing from time to time with no end in sight.
The problem took about a couple of days to be rectified.
pk -
Hot Leads Report visible on Home Page
Dear Colleagues,
I would like the Hot Leads to be seen in Home Page of one of Sales users.
I not sure where in Scoping or another area I should look for to enable this Insight report.
Greetings
SlavHi Slav,
I hope you must have created the business role for your sales users. You can customize the home page for the Business Role. To do the customization, you should follow the following steps:
1. Go to Microsoft Silverlight mode
2. Open your hope page and click on Setting button in right corner.
3. Click on Adapt and select your business role
4. Again click on Settings button in right corner, then Edit.
5. system will open the setting view and select the report.
6. Search hot lead report and click on add to role check box.
7. Click on Publish button in right corner to publish your changes to all users assigned in the business role.
After doing above steps, your Sales users will have Hot leads report in their home screen.
Regards,
Anil Poply -
Hi ! Work flow Experts!
I am triggering work flow from crm to ECC vise versa,I am unable to get Initiator User name it shows only CRM user name (RFC USER).
I want to get ECC server User names in CRM. I am running an remote function module from ECC to CRM, so i am getting only CRM user name,could any body advice me how to get an ECC server user names Its Urgent.
Regards and Thank you In Advance,
Raghava.VSince the workflow is initiated from CRM initiator will always be the one in CRM (crm user name).
To get ECC server user name in CRM you will have to use rfc to fetch data from ecc and get it in CRM. Initiator for for one workflow will always be one, if you want another agent then capture the name and create another conatiner element and use it.
THanks,
Shweta -
I want to erase saved user names in sign-in boxes and nothing I do erases them
My kids have put different user names in my e-mail welcome page and other welcome pages. The list is long. I'd like to delete all the saved names and start over just having the computer save the names we actually use. I have gotten into tools and tried to erase by erasing history etc and nothing seems to get rid of those pesky saved names. A little help would be greatly appreciated.
See [[Clear Recent History]] and remove the "Form & Search History"
See also http://kb.mozillazine.org/Deleting_autocomplete_entries -
I'm using conditions on tabs depending on the user. The tab on the home page is not working correctly. If the person is a user for the home page plus 2 other pages the tabs for the 2 other pages show up but not the tab for the home page. If the user has access to everything all the tabs show up. Any ideas?
972423 wrote:
As I am Java Developer and wanted to do JDBC connection for Java.....For Java, JDBC and JDeveloper related discussions, you'll find plenty of forums:
https://forums.oracle.com/forums/category.jspa?categoryID=285
https://forums.oracle.com/forums/category.jspa?categoryID=500
So I Have Installed Oracle Database Express Edition 11g......
But the home page on url...http://127.0.0.1:8080/apex/f?p=4950
is Not Working.....Just installed? Never worked before? Unreachable 'Get Started' page usually indicates that install was not completely successful, database creation failed because of OS misconfiguration.
Before even trying that url you should see a endpoint with port 8080 in Endpoints summary from lsnrctl stat command.
Use search and have a look through previous threads for this FAQ.
E.g. https://forums.oracle.com/forums/search.jspa?threadID=&q=%2Bpage+%2B4950&objID=f251&dateRange=thisyear&userID=&numResults=15&rankBy=10001 -
Hello everybody,
If an user enters in the url address as http://zoramsite.com/UsernameOrAnything
what I want is that the user will be directed to the home page of the site as
http://zoramsite.com
Where should I make changes in the application so as to succeed?
Please advice,
ThanksThat's "Nope, I don't know how", rather than "Nope, I'm not telling you" by the way. If I knew how, I'd be happy to tell you
By the way, you've got a few unrelated questions live here at the same time. Can I give you some advice? Concentrate on getting one thing working before trying something else. You'll save yourself an enormous amount of time
Maybe you are looking for
-
Hard Drive needs repair? - if so, how?
Dear all, I have used the Disk Utility software to check my hard drive and it gave me an error message. I used "Verify Disk" and the message was the following: "Disk Utility stopped verifying Macintosh HD" because the following error was encountered:
-
Syncing issues with Outlook when I add a contact to my iphone
I'm using the icloud to sync my calendar and contacts to my iphones and Outlook. Everything seems to be working perfect except one thing. When I add a contact to my phone it will not show up on my husbands phone or Outlook. I have checked my defaults
-
Hello I have the following components in the production order : 0000 A005.A06182 CC 0,6X669X2074 S280GD+Z275MC POL RR109F 71 M2 0001 B002.S00004 Colour Coated Sheet 68,531- M2
-
whenever I try to save a PDF document on mu iPad, it will only open up as text in my email and won't give me an option to download and save. Any suggestions?
-
Exporting an .mov file with timecode
Hi - I'm trying to find the best way to export an .mov file from Premiere or Encoder with timecode either burned in (as well as embedded in the file). Right now when I export the .mov files no timecode is coming through. Normally I would be able to r