User Name Personnel number

Hi,
I am looking to get the 'Personnel Number (PERNR) ' using sy-uname. Is there any table which hold this information.
Thanks,
Vind

It all depends how the data is maintained in your system
Ideally the user name is maintained against a personnel number in communications infotype 0105.
I dont think it is advisible to use USR21 as the field is not from PA and it is described as Person number and not Personnel Number.
maybe others can comment as well.
Cheers
Ajay

Similar Messages

Append User Name on the footer

How to append User name, page number and Date on the footer.

Hi,
Journal Entrys and Vouchers are relatively easy to do. You can create a UDF and call it User Name. Then apply the following formatted search:
SELECT T0.U_NAME FROM OUSR T0 WHERE T0.INTERNAL_K = $\[USER\]
I would set it to automatically refresh in order to populate the field.
You can also do this for Incoming and Outgoing payments, this would be ok if you raise them manually (Incoming payments are normally fine as people do tend to add them one by one). If you do an bulk payment run for Outgoing payments then filling in the UDF will require some kind of SDK i think.
All you would need to do is display the UDFs on your PLD layouts.
Unfortunately you cannot use the OUSR table and User Name field as I think this will pick up the current logged in user. Perhaps if once the document is approved it goes back to the originator to print and add that might solve it. I'm afraid i don't have SAP open so cannot test.
Regards,
Adrian

Got CS2 To Install but now getting notified that "user name, organization name or serial number is missing or invalid."

After much frustration, got CS2 installed to replace my now-unsupported CS1. Went to open Adobe Photoshop and got your Adobe Photoshop user name, organization name or serial number is missing or invalid.

First, Ganesh, your response isn't helpful because that link just explains why I had to download CS2 in the first place. Your response is the same that I got through repeated interactions with Adobe support personnel. If you're not going to provide a solution, then do not reply at all.
Second, GautamBehl, that doesn't explain why I was getting the notification when I tried to open Photoshop after successfully installing the CS2. Perhaps I should have been clear and explained that I was installing the "3 disc" CS2 design suite.
Here's the workaround I discovered. I downloaded Photoshop CS2 separately and had no problem. I would suspect that doing likewise with the other programs would get a similar result. I would expect that Adobe would fix the problem with the CS2 suite of programs, but according to my ineractions with Adobe support, are more interested in trying to sell recent software to users that they have just frustrated.

How to get personnel number of the user in the wd java code in Leave reques

Hi all,
we are using the standard Leave Request Applicatin ESS.
can any one please tell me how to get the personnel number of the user in the WD java code?
cause i have pass the pernr number to a bapi and get the details.
please help me its urgent.
thanks in advance.

Hi Madhu,
Create a model for the particular bapi in wd java and acess it in your component. Then pernr parameter will be available in the context and u can pass value for the parameter (pernr) to the model and get the output.
If you hav any doubt, please let me know.
Regards,
Jithin

"User names cannot start with a number" error while adding a user

Is it possible to use WL Portal 7.0 admin framework to manage users with all numeric
user id ?
I got an error "User names cannot start with a number" while trying to add users
with all numeric user ids. I am using "portalAppTools" web app provided with WL
7.0 out of the box.
What "out the box" functionality do I need to change to make this happen ? Thanks
Shah

The problem is that when we have user groups starting with a number, then the search
feature doesn't work for user groups (case # 466837 with BEA).
So, which brings me to the following question:
a. Should the search feature work?
b. What is the limitation? I mean, it is designed not to allow user groups starting
with a number. So, there must be a reason for this. So, if we change "disallowFirstCharDigit",
will it have any impacts on Portal?
As an aside, it seems somewhat strange that the Portals can start with a number!
Thanks in advance
Venkatesh
"Ture Hoefner" <replyto@newsgroup> wrote:
Hello Shah,
Search your tools web app for the UsermgmtTools.properties file. In
my
installation, it is at:
D:\bea70sp1\weblogic700\samples\portal\sampleportalDomain\beaApps\sampleport
al\tools\WEB-INF\classes\com\bea\jsptools\p13n\usermgmt\servlets\jsp
It starts with this:
# Messages and other properties used by usermgmt jsp tools
# Name properties - UserBean and GroupBean
disallowedCharacters: ~`!$%^&-*() {}[]|\\/?<>,:;+="'
disallowFirstCharDigit: true
Ture Hoefner
BEA Systems, Inc.
www.bea.com
"Shah Sidi" <[email protected]> wrote in message
news:3db0a001$[email protected]..
Is it possible to use WL Portal 7.0 admin framework to manage userswith
all numeric
user id ?
I got an error "User names cannot start with a number" while tryingto add
users
with all numeric user ids. I am using "portalAppTools" web app providedwith WL
7.0 out of the box.
What "out the box" functionality do I need to change to make this happen?
Thanks
Shah

Photoshop CS2 invalid user name or serial number

Application won't open and I receive the following message:
" Your photoshop user name, organization, or serial number is missing or invalid. The application cannot continue and must now exit"
The application was downloaded from adobe to replace a legitimate copy of CS2 which would not operate on windows 7. This was some time ago and the application worked, but it doesn't now.
What to do?

See the following for a special download for CS2...
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 - http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

I have downloaded Photoshop elements 5.0 to a new PC. I recieve error message: "Your Adobe Photoshop Elements user name, organization, or serial number is missing or invalid. The application cannot continue and must now exit."

I was referred here by customer service. I have downloaded Photoshop elements 5.0 to a new PC. After accepting the agreement I receive an error message saying "Your Adobe Photoshop Elements user name, organization, or serial number is missing or invalid. The application cannot continue and must now exit." There is no place to enter the serial number.

All your pictures will remain safe even after uninstalling the program. Your pictures are saved to your system in form of catalog present at C:\ProgramData\Adobe\Photoshop Elements\Catalogs\<your catalog><br />When you reinstall the program you can open this catalog and view all your photos again.

User name, organization, or serial number is missing or corrupt. FIX

Regardless of how this is happening--or why----it IS happening every time I try to run Adobe Photoshop elements 4.0. I purchased the program back in October, 2005 and have never been able to use it for more than a day or two. Without fail, I will open the program and get the message: Your Adobe Photoshop elements user name, organization, or serial number is missing or invalid. The application cannot continue and MUST now exit. And, believe me, it EXITS immediately! In the past I have only been able to completely uninstall the program and then reinstall it---until the point where the program no longer appeared in the ADD/REMOVE programs of the control panel--although it was installed but not working. Apparently, registry cleaners can be the culprit, but I did a complete "CLEAN" install of Windows XP Professional/SP2 and started from scratch with ABSOLUTELY NO OTHER PROGRAMS INSTALLED EXCEPT ELEMENTS 4.0. The program worked for all of one day before I, again, got the error and could no longer use the program. Therefore, I can NOT blame registry cleaners alone. There is something inherent in Windows XP that causes this problem. Through this forum I was able to identify the exact registry key causing the problem:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{EBB7C1C1-D439-4D9B -9FDC-954C10F266B0}
I was able to go to "regedit" (without the quotes) from the "run" menu and find this key (when the program was working). Highlight the key by clicking once on it and then go up to "file". Next, click "export" and save this key to notepad, Word or my documents---any place you know you can find it. I named it Adobe reg key.reg. The next time the program stops working, go to regedit---then to "file" and then "import". After clicking "import", find where you saved the key and click on it. This should import the key directly back into the registry where it belongs and the program should start working again. So far this has worked for me at least 5 times. There must be some fix for this-----from Adobe----soon. With this key exposed, what's to stop anyone from downloading the trial version, and then writing this key into the registry themselves. It's basically called a "crack" and could be used by anyone seeking to avoid paying for the program---SO----Adobe really needs to address this issue. I am totally against anyone stealing software in any way, shape or form, and I think this is what will happen unless Adobe gets a handle on this issue.

Let me get this straight: Every time your PE4 stops working you have to do a registry edit to get it to work again? That's insane!!!
I can sympathize with you, I've suddenly had similar problems with PE3 and have gotten little help from Adobe other than to be pointed to countless forum threads which do not answer the questions or solve the problem. Strangely it worked for several months before crashing and refusing to work again, not even able to re-install it.
I was pointed to your thread because I was told it was probably my registry cleaner that caused my problem with PE3, obviously they didn'r really read your post.
thanks, and good luck. I've gone back to PE2, at least it works and lets me get on with my workflow, which was being severely hampered by having to spend all my time searching for answers that don't seem to exist.

Error: "...user name, organization, or serial number is missing or invalid..." when you start Photos

MacIntosh photoshop CS2
Issue
When you start Adobe Photoshop, the application returns the error message, "Your Adobe Photoshop user name, organization, or serial number is missing or invalid. The application cannot continue and must now exit."
Detail
Photoshop previously started without error.
There is supposed to be a patch for this error message but I have not been able to find it. Help!

Without proper system information and other technical details nobody can tell you anything. As a start, read this:
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Mylenium

HELP ASAP!! PSE5 "elements user name organization or serial number is missing or invalid. thsi application cannot continue and must now exit

HELP!!!! I am a graphic designer I LOVE my version of Photoshop elements 5... I am also a Mom of two who depends on my party supply business as my only income currently!!!!
Upon opening to work on a party supply order DUE TODAY for a kid's first birthday I got this ERROR MESSAGE:
"Your adobe photoshop elements user name organization or serial number is missing or invalid. This application cannot continue and must now exit" And then closes.....
I don't know where my disc is to uninstall/reinstall since I got this program Oh say 10 years ago.... WHAT DO I DO!!? I am in complete PANIC mode!
Anyone?! Chat said they couldn't help me it's too old?!?! HELP

Hello ...Mom,
here you will find (if stored at Adobe) "General infos about your Adobe Account" https://www.adobe.com/account.html. To see what Adobe has saved about your serial number, please have a look there: http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
On the other hand you could use a non Adobe program, like
Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.…
If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
Good luck!
Hans-Günter

User Name, Organization, or serial Number not valid

I have windows 8
I own 4 disc Creative Suites 2.0
I installed the program.
All programs open but Photoshop.
I get the Error: "Your Adobe Photoshop user name, organizaiton, or serial number is missing or invalid. The application cannot continue and must now exit."
I uninstalled it.
Installed the online free version.
Same error.
Uninstalled that, and reinstalled my version.
Looked for the the database file expressed in solution 4 of the following web page
http://helpx.adobe.com/photoshop/kb/startup-error-photoshop-cs2-mac.html
Can't find the file they are talking about.
Need some help. Don't want to upgrade. Paid a lot of money for this version and I know it inside and out.
Just want to use it only.
Thanks for any help.
It worked a week ago by the way... Not sure what has happened for this to start up....
Thanks,
Jeff

I found the fix:
Uninstall all versions of Adobe cs2
When prompted for the install location you need to know what the "Updated Syste" is calling your install directory.
Most of the time it is: PROGRA~2
So you need to change your install location to :
c:\PROGRA~2\Adobe
Then go through the rest of the install as normal and BAM! Photoshop will work without anymore errors.
Thanks to this article I was able to figure it out:
http://planetmediocrity.com/2013/01/installing-photoshop-cs2-on-windows-7-64-bit/
If only the people at Adobe help centers were this educated....
I like to buy software and use it. NOT keep buying software updates and upgrades. Especially when the software is between 600 and 1000 dollars. For those prices it should ALWAYS work.

Cs2/Windows 7x64 - User name, organization, or serial number is missing or invalid?

Ok, I'm at my wits end on this one. I've installed and reinstalled this CS2 suite multiple times, tried to find the proper registry keys, pretty much anything i can think of to get this to work, but every time I go to boot up one of the programs in the suite (such as Photoshop) I get an error stating "Your Adobe Photoshop user name, organization, or serial number is missing or invalid. The application cannot continue and must now exit". There is only an OK box, and absolutely no way for me to look at the licensing information to see what it's getting hung up on.
I've confirmed everything is correct upon installation. I can't find an e-mail address for Adobe's customer support so I'm asking you guys - what the hell is going on with this software? Anyone fix this before?

@exshopper
A few quick items:
(1)     I genuinely hope you find satisfaction with PaintShop Pro and that it meets your needs, whatever they are.
(2)     Bob Levine is not and has never been an employee of Adobe Systems Incorporated. He does speak his mind and certainly lets Adobe know when our products and policies need improvement. Without attempting to put words in his mouth, I think you may be objecting to the fact that he does understand the needs of software developers in terms of marketing and supporting their products and the value of same to customers. He does rightly point out that the monthly subscription costs for the tools they use to earn their living usually amount to far less expenditure than many if not most creative professionals spend each day on their favorite beverages. There is still a major failure of many computer users to comprehend the cost of development and support of software simply because software isn't “tangible” in the way computers, printers, and other peripherals are.
(3)     When you refer to purchasing “the CS2 suite for 1500 pounds (over $3000 back then)” I assume that you are referring to the Creative Suite 2 Premium which included every creative product that Adobe had at the time including InDesign, Illustrator, Photoshop, GoLive, Version Cue, Bridge, Acrobat, etc. The “back then” was early 2005, nearly a decade which is an awful long time in this industry. If you “bought” the product more recently than eight years ago, much less five years ago, you already were purchasing something that was no longer current. And you certainly could not have purchased it from Adobe.
(4)     I am sorry to read that your “computer died.” Was that computer nine years old? To be consistent with your expectations of Adobe, hopefully you expected your computer's manufacturer to continue to support that computer with a free or reduced cost repairs and/or replacement because you spent so much money on that computer. And of course you expected that new computer would run the exact same OS as your dead computer and support all your old peripherals including SCSI drives, diskettes, etc.
(5)     Whether you or even I like it or not, the subscription model better reflects the reality of development, distribution, and support of software. Under the previous “perpetual license” scheme, you paid for a license to use the software for perpetuity on the hardware and software (i.e., OS) platforms for which it was developed and tested, nothing more. Unfortunately, the expectations of many of our customers was that somehow Adobe would provide free updates to their current program versions to provide support for future incompatible hardware and operating system platforms. However, that is a totally untenable business model. In contrast, many high end software applications (not graphic arts applications) not only charge for a license, but have a requirement for payment of either a monthly or annual maintenance contract which cover most such hardware/OS upwards incompatibility contingencies. The subscription model currently in-place basically eliminates the up-front licensing and a maintenance contract with a simple monthly fee that provides access to all updates and upgrades. It is fairly clear and simple.
(6)     In terms of your costs over time, you didn't indicate which aspects of “CS2 suite” you were using, but given your apparent emphasis on image editing, Adobe does offer a very attractive subscription that includes both Lightroom and Photoshop. Even if you don't use Lightroom at all, it is still a great price even just for Photoshop.
          - Dov

My CS2 has worked fine for serval years. All of a suddend my user name, Alan Ford, and sereal number have vanished from my program. How do I correct this?

My CS2 has worked fine for serval years. All of a suddend my user name, Alan Ford, and sereal number have vanished from my program. How do I correct this?

Hello,
Why do you need to use the regasm utility from the post-build action?
There is a difference between signing the assembly with a strong name and digital signature. The
How to: Sign an Assembly with a Strong Name article in MSDN explains how to sign an assembly with a strong name (.snk). See
How to digitally sign a strong named assembly for adding a digital signature.
You may also find the
What's the Difference, Part Five: certificate signing vs strong naming article helpful.

Error in MSS requisition 'No personnel number is assigned to your user in SAP E-recruiting '

Hi ,
We are getting error in MSS requisition in E recruiting system that 'No personnel number is assigned to your user in SAP E-recruiting '
while clicking on next button in the requisition form.We have assigned all specified roles for the E-rec related things with authorisation for 'P' and all
other objects.Please comment on this if anybody faced the same issue

Hi, just want to add to this issue might be useful for somebody else.
We had the same issue, it turns out that the person who is raising the requisition has 2 Business partners in the system. We set one business partner to be "not released" and in addition to that we added the NA relation as this is missing with the CP
MfG.

Tables to link Business Partner number and User Name

Hello SAP Experts,
I'm having a hard time looking for the relationship tables that could link the Business Partner numbers with the user name of a user. I have tried to link the BUT* tables, the USR21 table, and several HRP* tables and I can't seem to find a link. For the table BUT000, the field XUBNAME which is suppose to contain the user names of the users are left blank for some reason.
I just want to ask if there is any other table relationships I can check so I can retrieve the User name of a user using his/her BP number or vice versa. Thank you in advance!
Regards,
Romeo

hi,
i am not sure about tables but you can use FM BP_CENTRALPERSON_GET to get the user name from BP and vice versa. Get the BP guid from BUT000 table and give that to the FM
thanks,
sankar.

User Name Personnel number

Similar Messages

Maybe you are looking for