User names for non-existing guest accounts appearing in WCS reports

Hi All,
I currently have a client where we have deployed a guest network using webauth and the lobby ambassador account to provision guest users under WCS 5.2.
When running client detail reports there are a number of odd behaviours that i don't understand.
First and most importantly the username section of the report is populated with usernames that have never been provisioned and do not currently exist.
I made a guess and thought maybe it was recording usernames of people who had attempted to log in via webauth using their normal user accounts as the recorded names were in this format but this did not generate an entry in the report.
The second issue was that a lot of users had pulled down a few MB (8.5 was the highest at that point) of data while not authenticated. The standard webauth page is used with some minor changes and this is tiny so i can't account for where this data is coming from unless they are pulling down that page repeatedly.
I am hoping someone will have experienced these 2 situations and can assist.
Thanks
Ben

The username section can get populated from the users that do exist on the controller.
The second issue doesnt make much sense, you may want to open a TAC SR to investigate this further

Similar Messages

  • I do NOT want Firefox to remember my sign-on user name for my e-mail account. How can I get rid of this?

    When I start typing my user name for hotmail, it automatically pops up. I do NOT want this. How do I get rid of it?

    *Click the (empty) input field on the web page to open the drop down list
    *Highlight an entry in the drop down list
    *Press the Delete key (on Mac: Shift+Delete) to remove it.
    *http://kb.mozillazine.org/Deleting_autocomplete_entries
    *https://support.mozilla.com/kb/make-firefox-remember-usernames-and-passwords
    * https://support.mozilla.com/kb/Form+autocomplete

  • HT5616 I have an apple id; but when I try to sign in to iCloud, I get the msg that the apple id is not an iCloud account.  However, apple was able to bill me for my non-existent iCloud account.  How does that happen?

    I have an apple id; but when I try to sign in to iCloud, I get the msg that the apple id is not an iCloud account.  However, apple was able to bill me for my non-existent iCloud account.  How does that happen?

    If you didn't create an iCloud account on an iOS device or Mac, you don't have one.  You can't create an account on a PC.  If you were charged for an iCloud storage upgrade without having an account, contact the Apple online store at the bottom of this page for a refund.

  • How do I restore my iPhone 4s when it asks to put in a password for a non existent iCloud account?

    how do I restore my iPhone 4s when it is asking me to sign into a non existant iCloud account?

    Do you have a second hand device and the Activation Lock has not been removed by the previous owner?
    Check the status of the Activation Lock on your computer by using this link: icloud.com/activationlock
    If the Activation Lock is still active and this is not one of your Apple ID's, if you are using more than one, contact the previous owner to have the Activation Lock removed:
    What if I purchase a device that is still linked to the previous owner's account?
    Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. Learn how to remove a device from a previous owner's account.
    copied from Find My iPhone Activation Lock

  • RDS Gateway + Smart Card Error [ The specified user name does not exist.]

    I have the following Windows Server 2008 R2 servers:
    addsdc.contoso.com, AD DS Domain Controller for contoso.com
    adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
    fileserver.contoso.com, RDS Session Host for Administration enabled
    rdsgateway.contoso.com, RDS Gateway enabled
    tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
    And the following Windows 7 PCs:
    internalclient.contoso.com
    externalclient.fabrikam.com
    There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
    I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
    From internalclient.contoso.com, I can RDP to fileserver.contoso.com
    using the smart card just fine with no certificate errors.
    From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
    via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
    From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
    via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
    BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
         The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support. 
    When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
    - but I'm pretty sure this is a supported scenario?
    The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
    [email protected] which matches the UPN of the user account as it was auto-enrolled.
    Does anyone have any ideas?

    I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
    to use NLA.

  • Question about ".Mac User Name" info in System Preferences/ Accounts

    This is really bugging me. When I first purchased the mac mini I set the ".Mac User Name" info in System Preferences/ Accounts to the right name and wrong password. My .Mac Mail application works fine. but when I reenter the name and pass in ".Mac User Name" info in System Preferences/ Accounts and close/reopen I still see the old password reappearing. This does not affect anything, but it sure ticks me off a bit. Any idea why it is holding on to the old password? Is there any way I can resolve this so that it shows my current .Mac info correctly? Thanks for any help in advance.

    This password is probably kept in Keychain. I changed my Mac User Name and password in Account preferences, and, after closing the Preferences, a new item appeared in Keychain/session with the new name and password

  • Cant Get Mail error message because password or user name for iCloud is incorrect.  Ive gone and tried to change it and been successful -I think- but am still getting this message continually.

    I keep receiving an error message: "Can't Get Mail" because the  "password or user name for iCloud is incorrect". Ive gone and tried to change the password and been successful -I think- but am still getting this message continually.

    To reset your Google password
    https://www.google.com/accounts/recovery/?ard=AHwGkRmuwaiAewp9JAmQTmcye_kbUor9v4 iKaP0sQVuYYOlYgTdGmUFl2Z_KkETd7Jjh1GqzGS4BBOQvbURZwzUTEViJmKtt4DfEyx6T2yfVxXT72X gwXT2dP7PfeGI08YvGtutrlCBol7hOXTQt7Wd9lZ6NVdxhjA
    If problem with link, just Google for reset gmail password

  • How can I unlock the copy protection of songs that I've acquired some years ago with an old - and non existing anymore - account? Can I link the songs to my new account or do I have to purchase them again?

    How can I unlock the copy protection of songs that I've acquired some years ago with an old - and non existing anymore - account? Can I link the songs to my new account or do I have to purchase them again?

    If you're in the US, you will be able to use iTunes Match for $25 a year to remove copy protection in a few months: http://www.apple.com/icloud/features/
    If you're not, you can't.  You can authorise iTunes with the old account in addition to your current account, so all your songs will play, but I'm not sure what will happen if you try to sync them to an iPod.

  • JOB_OPEN - SUBMIT - JOB_CLOSE - User Name for the Job

    Hi,
    I have a code like that:
    CALL FUNCTION 'JOB_OPEN'
        EXPORTING
          jobname          = lv_jobname
        IMPORTING
          jobcount         = lv_jobcount
        EXCEPTIONS
          cant_create_job  = 1
          invalid_job_data = 2
          jobname_missing  = 3
          OTHERS           = 4.
    * Call Update PO from Sales Order
      SUBMIT zpcc_mm_upo3
        WITH p_vbeln = puv_vbeln
        USER lc_uname
        VIA JOB lv_jobname NUMBER lv_jobcount
        AND RETURN.
      CALL FUNCTION 'JOB_CLOSE'
        EXPORTING
          jobcount             = lv_jobcount
          jobname              = lv_jobname
          strtimmed            = lc_true
        EXCEPTIONS
          cant_start_immediate = 1
          invalid_startdate    = 2
          jobname_missing      = 3
          job_close_failed     = 4
          job_nosteps          = 5
          job_notex            = 6
          lock_failed          = 7
          OTHERS               = 8.
    In this code as you see I can run the SUBMIT program with a specified user. But the creator of the job always becomes SY-UNAME. So is there a way to specify the user name for a job creator? I don't want to use SY-UNAME.
    Thanks,

    Hio try this way...
    CALL FUNCTION 'JOB_OPEN'
         EXPORTING
           jobname          = lv_jobname
         IMPORTING
           jobcount         = lv_jobcount
         EXCEPTIONS
           cant_create_job  = 1
           invalid_job_data = 2
           jobname_missing  = 3
           OTHERS           = 4.
    "Comment this
    * Call Update PO from Sales Order
       SUBMIT zpcc_mm_upo3
         WITH p_vbeln = puv_vbeln
         USER lc_uname
         VIA JOB lv_jobname NUMBER lv_jobcount
         AND RETURN.
    "Comment end
    * Call function to submit the job
      CALL FUNCTION 'JOB_SUBMIT'
           EXPORTING
                authcknam                   = wa_authchknam        "Pass the Other User name you want
                jobcount                    =  lv_jobcount
                jobname                     = lv_jobname
                REPORT                      = 'zpcc_mm_upo3'
                VARIANT                     = jobs-variant  "Create Varaqint
                PRIPARAMS                   = wa_PRI_PARAMS
          EXCEPTIONS
               BAD_PRIPARAMS               = 1
               BAD_XPGFLAGS                = 2
               INVALID_JOBDATA             = 3
               JOBNAME_MISSING             = 4
               JOB_NOTEX                   = 5
               JOB_SUBMIT_FAILED           = 6
               LOCK_FAILED                 = 7
               PROGRAM_MISSING             = 8
               PROG_ABAP_AND_EXTPG_SET     = 9
               OTHERS                      = 10
       CALL FUNCTION 'JOB_CLOSE'
         EXPORTING
           jobcount             = lv_jobcount
           jobname              = lv_jobname
           strtimmed            = lc_true
         EXCEPTIONS
           cant_start_immediate = 1
           invalid_startdate    = 2
           jobname_missing      = 3
           job_close_failed     = 4
           job_nosteps          = 5
           job_notex            = 6
           lock_failed          = 7
           OTHERS               = 8.
    Prabhudas

  • Using a single user name for RADIUS

    I have a WLAN with 5 1200 Series AP (A/G) configured for Fast Roaming using the Cisco supplied documentation. Can I use one user name for all of my devices to connect to the Internal Radius Server? This would be similar to having a passphrase for WPA. Thank you for taking the time to read my post.

    Chris:
    I understood you have autonoomus/standalone APs wiht WDS (Wireless Domain Server) configured for FSR. right?
    You can use same username from multiple devices if your Radius does not prohipit more than one session per username.
    Make sure that your RADIUS server allows multiple sessions for the user you want to use and it should work.
    Note please that using same username with multuple users is not the same of using PSK (talking from security perspective). using 802.1x is usually more secure.
    HTH
    Amjad

  • User Exit for Changing G/L account in Accounting Document

    hi all,
    This one is urgent for me. If you guys can help.
    Iam looking for a user-exit to change the G/L account while posting the accounting document.
    If someone has worked on a similar user-exit Kindly help.
    Thanks and Regards
    Varun

    Hi Experts,
    The requirement is to change the GL account when PGI is done for a delivery.
    I have coded in the above user exit for changing the GL account. I am facing the issue here.
    I am changing the GL account through a user exit, but even before the user exit is  called the standard SAP is throwing a error.
    the Error is GL account is blocked for posting in the company code. This check is happening for the GL account what standard SAP proposes from the customization. The GL account that is getting picked is blocked in SPRO for posting in the mentioned company code. Because of the error message, our z code is not getting executed.
    Kindly suggest if some user exits that can be used even before this error message. or let me know if you have any suggestions to over come this.
    I have coded this in the enhancement point. Include  MM07MFK0_KONTIERUNG_PRUEFEN and subroutine kontierung_pruefen.
    Thanks,

  • My iPhone 5S prompts me for my password to an Apple ID email that no longer exists as an account.  How do I change my Apple ID address without having to change the primary address to a non-existent email account?

    I cannot sign into icloud on my phone because the Apple ID is an email account that has been deactivated and deleted.  How can I change my Apple ID without having to change the primary email address to this non-existent account? If I did so, I wouldn't be able to access the account to receive the verification email. Please help!

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  When you do this you may find that the password for your old ID isn't accepted.  If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You should not need to verify the old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • HT4798 Why did a guest account appear in my login window.  I normally only have two authorized users.

    My log in window today showed two authorized login choices and a guest choice.  When logged in yesterday,  it only showed the two authorized login choices.  The only changes I have made were done on iPhone and iPods setting up iCloud access and accounts.  Did this cause the guest user to appear on my MBP?
    thnaks

    If you set up Find My Mac in iCloud, then it creates a Guest account.

  • Safari created an incorrect user name for my hotmail account and I am unable to access it

    I have a hotmail email account that I recently had to reset the password.  Safari created the wrong user name leaving of one letter ("l) and I am unable to access the account.  I am also unable to manually change the user name; it keeps referring back to the incorrect name.  I have Safari 7.1 on my MacBook Pro.  I have been in contact with hotmail at Microsoft and they have been unable to help me further and indicate I must bring this to Safari support which I am doing.  If I use another browser (Firefox) I am able to get into the account but it would be nice to have this back on Safari.  Appreciate help.
       LJBrown

    I was able to locate the source in Website Data.....it was set up via mail.live.com through Microsoft/Outlook.   They have changed their format considerably very recently.  Anyway removing that one entry (.live) and then using a new password I was able to bring up the original email program although it's no longer known as Hotmail but Outlook.  So I guess the problem was in Safari...I don't know how that user name was changed.  It may have been a typo error on my part and the corrupted name was maintained by Safari?  Anyway all is good now. Thanks for your help.
        LJB

  • More Lion issues - Throwing Console errors for non-existent application

    Again, with the bad side of Lion.
    I was receiving all kinds of console errors in Lion with TweetDeck and Adobe AIR apps so I de-installed these applications and removed them from the system. However, Apple's fantastic Lion Operating System still is complaining about them even though they are not to be found.
    In the console I am getting sandbox errors on locations and files that are non-existent. Below is a snapshot of the error messages, and the directory referred to:  /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast....  and the others DON'T EVEN EXIST!!
    How do I keep this from happening?  Why does the OS go after this when it's been removed?????
    8/20/11SaturdayAugust 5:30:14.113 PM    mdworker32    kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    8/20/11SaturdayAugust 5:31:11.000 PM    kernel    nstat_lookup_entry failed: 2
    8/20/11SaturdayAugust 5:31:44.239 PM    com.apple.SecurityServer    Session 100071 created
    8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ .fl89CB8354, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/.fl89CB8354, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ .fl89CB8354, status=-1 errno=No such file or directory ext=(null)
    8/20/11SaturdayAugust 5:32:01.234 PM    Preview    snapshot of document took: 0.00030899 secs, calling unblockUserInteraction
    8/20/11SaturdayAugust 5:32:01.318 PM    Preview    writing of document took: 0.083616 secs, success = YES
    8/20/11SaturdayAugust 5:32:42.333 PM    rpcsvchost    sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    8/20/11SaturdayAugust 5:32:42.483 PM    sandboxd    ([66316]) smbd(66316) deny job-creation
    8/20/11SaturdayAugust 5:32:42.583 PM    rpcsvchost    sandbox_init: com.apple.msrpc.srvsvc.sb succeeded
    8/20/11SaturdayAugust 5:32:42.609 PM    smbd    anonymous connected to path /var/rpc/ncacn_np
    8/20/11SaturdayAugust 5:32:53.587 PM    sandboxd    ([66320]) rpcsvchost(66320) deny mach-lookup com.apple.distributed_notifications@1v3
    8/20/11SaturdayAugust 5:34:53.329 PM    smbd    anonymous connected to path /var/rpc/ncacn_np
    8/20/11SaturdayAugust 5:39:32.429 PM    mdworker32    kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.

    Don't know how you de-installed but you didn't fully uninstall them. If you did not have an uninstaller supplied with the applications, then here's what you need to consider in order to fully uninstall:
    Uninstalling Software: The Basics
    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash.  Applications may create preference files that are stored in the /Home/Library/Preferences/ folder.  Although they do nothing once you delete the associated application, they do take up some disk space.  If you want you can look for them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application.  In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder.  You can also check there to see if the application has created a folder.  You can also delete the folder that's in the Applications Support folder.  Again, they don't do anything but take up disk space once the application is trashed.
    Some applications may install a startupitem or a Log In item.  Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder.  Log In Items are set in the Accounts preferences.  Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab.  Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
    Some software use startup daemons or agents that are a new feature of the OS.  Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.  Unfortunately Spotlight will not look in certain folders by default.  You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead.  Download Easy Find at VersionTracker or MacUpdate.
    Some applications install a receipt in the /Library/Receipts/ folder.  Usually with the same name as the program or the developer.  The item generally has a ".pkg" extension.  Be sure you also delete this item as some programs use it to determine if it's already installed.
    There are many utilities that can uninstall applications.  Here is a selection:
    AppZapper
    Automaton
    Hazel
    CleanApp
    Yank
    SuperPop
    Uninstaller
    Spring Cleaning
    Look for them at VersionTracker or MacUpdate.
    For more information visit The XLab FAQs and read the FAQ on removing software.

Maybe you are looking for