User not authorized for particular Transaction.
While running a Custom Transaction I m getting error that user is not authorized for that transaction.
how to solve this?
Hi,
Try using FM C160_TRANSACTION_CALL. Let's see if this works.
OR
Create a custom program that calls your custom transaction code.
Hope this helps.
Benedict
Similar Messages
-
Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
IngoHi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo -
User not authorized for message processing
Hi,
I have a SM59 connection from SAP PI --> SAP R3.
Targethost sapr3T.mydomain.
Path prefix: /sap/xi/engine?type=entry
Process: From PI send a message to R3 (scenarie is a Server Proxy...)
User: PIPROXY has Role SAP_XI_APPL_SERV_USER
This is not enought I get error "User not authorized for message processing" when trying the connection from my PI server. (I tried with SAP_ALL and then it works)
What would be the right user role for this operation ?
Br,
MartinHi all,
I have the same problem in a XI -> BW scenario (Abap proxy).
I get error "User not authorized for message processing" when try to send message from PI to BW.
(I tried with SAP_ALL and then it works)
User: PI1REMOTE has Role SAP_XI_APPL_SERV_USER and SAP_XI_IS_SERV_USER
What would be the right user role for this operation ?
Thanks
Daniele -
RECEIVER: ERROR: Access to requested resource is not authorized for user
Hi,
I installed two instances of COREid Federation in my machine. Also installed SiteMinder and LDAP. Source Domain of COREid (8101) uses LDAP as IdMBridge and Destination Domain (9101) uses SiteMinder as IdMBridge. I am trying to access the resource protected by the SiteMinder from the source domain using the URL which is constructed using the pattern given in the PDF:
http://mymachine.domain.com:8101/shareid/saml/ObSAMLTransferService?DOMAIN=DestinationDomain&method=POST&TARGET=http://mymachine.domain.com:8887/Source/Source.html
Assertions are generated and I can see the assertion in the Source domain and transferred to the Destination Domain.
when i try to access the Source.html protected with siteminder, I get the following error in the Destination Domain Shareid Log file:
ERROR - [http10113-Processor3] - RECEIVER: ERROR: Access to the requested resource is not authorized for user uid=username, ou=People, dc=xyz,dc=com
Please help me to solve this issue?
Note: When the resource is accessed directly, siteminder authorizes the same user.We also occationaly have this error. See my log for an example :
Transaction completed successfuly for DocEntry = 54358 : In company FIXTHISPLEASE on 3/2/2010 9:48:49 AM
Transaction completed successfuly for DocEntry = 54365 : In company FIXTHISPLEASE on 3/2/2010 10:24:55 AM
Transaction completed successfuly for DocEntry = 54403 : In company FIXTHISPLEASE on 3/2/2010 12:14:53 PM
-5006 - The requested action is not supported for this object. for DocEntry = 0 : In company FIXTHISPLEASE on 3/2/2010 1:38:45 PM
Transaction completed successfuly for DocEntry = 54424 : In company FIXTHISPLEASE on 3/2/2010 2:40:44 PM
Transaction completed successfuly for DocEntry = 54425 : In company FIXTHISPLEASE on 3/2/2010 3:01:51 PM
Transaction completed successfuly for DocEntry = 54426 : In company FIXTHISPLEASE on 3/2/2010 3:03:41 PM
Transaction completed successfuly for DocEntry = 54427 : In company FIXTHISPLEASE on 3/2/2010 3:05:12 PM
As you can see from 9:48am to 3:05pm, one occurance of this error occured. And they say that the transaction was
tried a few seconds later and it worked.
the STARTTRANSACTION() and ENDTRANSACTION() are used by the DI API so I'm really in the blank about this error and it starts to anoy the customer. Their SAP is 2007 SP01 PL08
Any concrete ideas about this ? -
Want Transaction History for Particular Transaction for Particular User. .
Hello Friends,
I have one query.
I want to get detailed Transaction History for Particular Transaction for Particular User_Id for particular Time/Date period, with his/her Terminal ID info ,also.
One USER_ID in SAP Server is shared among 6-7 people to do their work.
So, I want to know that from which terminal that user has run that transaction to do its work on particular Date/time.
I tried STAT, STAD, ST03N, but did not help me very much to get deep level information.
May be, i am missing something to get the solution for this kind of situation.
Any Solution for this kind of Situation ?
I am waiting for your valuable Response.
Regards,
Bhavik ShroffI want to get detailed Transaction History for Particular Transaction for Particular User_Id for particular Time/Date period, with his/her Terminal ID info ,also.
ST01 will give you the Result after switching on the TRACE. I want to get Transaction History for a particular DAY/Weeks/Month .
e.g.
One User Id is shared among 6-7 people. One of the person did something using FB08 transaction on last 08/07/2008. But, as the User ID is shared among several User, How can i know the person who did that change and from which place/Terminal.
See,
I have the following information to fire the search.
-> User Id information
-> which transaction he/she used to do that work
-> When he did the change for something (means i know the exact date)
But , I want to know ,from which Terminal he/she executed that transaction, as the User ID is shared among several people.
You tell me the way ,so that i can have total required information for this kind of situation.
If i am wrong at any step , then let me know.
Regards,
Bhavik Shroff. -
Shared Services Console - User is not authorized for the action
Hi,
I have installed Essbase 11.11.3 and configured on Linux. I started EPM and then the Shared Services Console. I created a new group Poweruser and assigned a new user to it. I provisioned the group withall the rights of the admin. This all works.
When I log on with the new user on the Shared Service Console and go to Essbase Studio Server and click on the Essbase Studio Server application it gives me the message:
User is not authorized for the action
This is the same message as I get under the user admin. Can anyone tell me what I can possibly do to make it work.
The service for EAS is started properly. The one thing that is not configured is HBR.
PatrickHi,
What are you trying to achieve, provision a user for essbase studio ?
EAS is a separate product from Studio.
Cheers
John
http://john-goodwin.blogspot.com/ -
The connection was denied because the user account is not authorized for remote login
Using Terminal Server 2008 not able to get non administrator users to login to the remote desktop. Have tried from Windows server 2008 and from Windows servers 2003. Get error login in "The connection was denied because the user account is not authorized for remote login" from Windows Server 2008. Error "The requested session access is denied" from Windows Server 2000.
Is that seriously the only way to do this? Doesn't this render the "Allow log on through Terminal Services" GP Setting useless?
I would like to know this answer, as well. I have created a new AD group for my assistant admins called "Domain Admins (limited)". I have added this group to the GP setting "Allow log on through Terminal Services", but the
assistant admins cannot log in through RDP. It 'feels like' this is all I would need to do.
Craig
Found some good info
here. There are really two things required for a user to connect to a server via RDP. You can configure one of them via Group Policy but not the other.
1) Allow log on through Terminal Services can be configured through Group Policy, no problem.
2) Permissions on the RDP-listener must also be granted. If your user is a member of the local Administrators group or the local Remote Desktop Users group then this is handled. If you are trying to utilize a new, custom group (as I am),
then there isn't a way to do this via group policy (that I have found).
EDIT: Found the answer. I am creating a blog post to outline the steps. They aren't hard, but they're not self-explanatory. It deals with the Restricted Groups mentioned above, but it's still automate-able using Group Policy so that you
don't have to touch each computer. I think the above poster (Andrey Ganev) got it right, but
I had trouble deciphering his instructions.
Here is my blog post that walks through this entire process, step-by-step. -
User is not authorized for RFC1
I created user with roles SAP_BC_USER_ADMIN and SAP_BC_AUTH_DATA_ADMIN. But user can not add roles to another user, and i get error "User USR_ADM is not authorized for RFC1".
What's wrong?Hello
We have moved this thread to the SAP NetWeaver Administrator forum as this is not a PI specific issue. You will have a better chance of getting a quality answer to your query on this forum.
Can anyone assist with this query?
Regards
XI/PI Moderator -
User exit/ badi for fb02 transaction
Hi,
what are the appropriate user exit/ badi for fb02 transaction for a disabling(graying out) a
payment block field for particular users..?
Regards,
AviFollowing are the exits available for FB02
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function Exits for EDI in FI
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment) -
Digital Signature - Setup User master record for Particular group of user
I already setup Electronic signature for RR and UD. but having problem to complete transaction.
When a Digital signature is executed, the system should copies the signatory name from the user master record to the signed document. However, the name has not been maintained completely in user master record and for this reason, i cannot execute the signature. So how can i setup User master record for Particular group of user?
Regards,
NPIt is actuly comes under QM module to save the test record, but before saving it, we need to have authorization.
For authorization, we are having digital signature.
So i need to assign user group for particular those authorization digital signature. so i thought, might be IDM can help on that?
How would i do that? so are you guys able to help me on that ?
Thank you
NP -
" User not authorized" error while deploying webdynpro application on WAS
I am getting following error while deploying dyn pro application on WAS
Error
May 17, 2005 6:37:21 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[002]Deployment aborted
Settings
SDM host : DYNPRO
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/720359/LOCALS1/Temp/temp50603PVTOSAP.ear
Result
=> deployment aborted : file:/C:/DOCUME1/720359/LOCALS1/Temp/temp50603PVTOSAP.ear
Aborted: development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.18.37.08':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [DYNPRO] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: User not authorized.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted
Additional Log :
May 17, 2005 6:37:21 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:
[002]Additional log information about the deployment
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7162 - 630_SP]/>
<!NAME[D:\usr\sap\DYN\DVEBMGS00\SDM\program\log\sdmcl20050517131312.log]/>
<!PATTERN[sdmcl20050517131312.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
May 17, 2005 6:43:12 PM Info: -
Starting deployment -
May 17, 2005 6:43:12 PM Info: Loading selected archives...
May 17, 2005 6:43:12 PM Info: Loading archive 'D:\usr\sap\DYN\DVEBMGS00\SDM\program\temp\temp50603PVTOSAP.ear'
May 17, 2005 6:43:14 PM Info: Selected archives successfully loaded.
May 17, 2005 6:43:14 PM Info: Actions per selected component:
May 17, 2005 6:43:14 PM Info: Update: Selected development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.18.37.08' updates currently deployed development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.09.04.27'.
May 17, 2005 6:43:15 PM Info: Error handling strategy: OnErrorStop
May 17, 2005 6:43:15 PM Info: Update strategy: UpdateAllVersions
May 17, 2005 6:43:15 PM Info: Starting: Update: Selected development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.18.37.08' updates currently deployed development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.09.04.27'.
May 17, 2005 6:43:15 PM Info: SDA to be deployed: D:\usr\sap\DYN\DVEBMGS00\SDM\root\origin\local\PVtoSAP\LOKAL\0.2005.05.17.18.37.08\temp50603PVTOSAP.ear
May 17, 2005 6:43:15 PM Info: Software type of SDA: J2EE
May 17, 2005 6:43:15 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
May 17, 2005 6:43:15 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
May 17, 2005 6:43:15 PM Error: Aborted: development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.18.37.08':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [DYNPRO] with user name: [J2EE_ADMIN]
Check your login information.
Exception is:
com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: User not authorized.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
May 17, 2005 6:43:17 PM Error: -
At least one of the Deployments failed -Hi Abhijeet,
1. Execute the remoteGUI
<<Installed drive>>:\usr\sap\J2E\JC00\SDM\program\RemoteGui.bat
2. Click the "Connect to SDM server" (Menu "SDM GUI --> Login")
3. Give the hostname (DYNPRO) and port (50018)
4. Enter the password and click login.
Check whether you are able to login or not. If you are not able to login through the RemoteGUI, then the password might be wrong. Check the password.
Regards,
Santhosh.C -
ITunes will not copy certain songs to my iPhone - I'm "not authorized for it on this computer"
Hi. I get an error when I try to transfer certain songs from my computer to my iPhone. I get the following error, "(song name) was not copied to iPhone "____" because you are not authorized for it on this computer." For the particular songs for which this error comes up, I purchased them many years ago. I had them on my PC and transferred them to my iPhone just fine. I recently got rid of the PC and bought a Mac Mini (yay!) and copied my files over to the new computer. Then, I connected my iPhone to the Mini and synced it. Then, I noticed that there were some songs on my phone that I didn't want on it so I unchecked them in the Library on the Mini and chose the "sync only checked songs" option and synced again. Nothing changed. So, then I did an Autofill thinking that would make the selected songs on my Mini and matched the songs I wanted on my iPhone. That's when I noticed the songs missing on my iPhone (songs that I had selected on my Mini and wanted on the iPhone). I've never really been able to figure out how to work iTunes so I'm sure I've done something wrong. I can't decifer the error message so your help would be greatly appreciated. (I've authorized the Mini.)
Any ideas what the problem might be? Thanks in advance.Hi there!
I've a very similar & the same problem but for me this has been happening ever since iTunes 7.1.5, so not exclusively since 7.2 was launched
In addition to the same problem you're having, iTunes will not sync any of my converted DVD movies and several video podcasts giving me the same error message you mentioned. If it try to play these video's out side of iTunes with QuickTime, I get 'Error -36: An I/O Error' warning and thats it, but I can play with any other media player including the dreaded Windows Media Player! If I copy these files on to a separate HHD, Flash Stick or on to another PC (i.e. so they’re played from not in the iTunes folder in my documents) they all work fine and oddly also with QuickTime, so I'm happy the files are not corrupt. I'm afraid to attempt to play any remaining video's that I managed to sync sometime before this problem in iTunes because when I do, its then that I can never use it again and it gets removed from my iPod!
I can't find anything on this problem anywhere, and I don't know where to go to get help from Apple not that I’m sure they’d be too helpful?
Does anyone have any suggestions?
Thanks
Regards
Jaime
PS: Running Vista Enterprise and I have the MS Vista Patch loaded despite never having a problem either burning CDs or ejecting my iPod?
White 5G - boot ver 1.2.1 Windows Vista Intel Duo 2.2Ghz, 1.5GB Ram, 2x 350GB Disks - Encoding AAC 256bps via iTunes -
To Find Include for Enhancement for Particular Transaction
Hi Friends,
Could You Plz assist me...
How to find out the User Exit for Particular Transaction.
Like for ME23N, we have a Include RV64A701 OR for VA01, we have the include MV45AFZZ and so on for every Transaction, which we believe as the User Exits.
Plz let me know, How to find out these Includes apart knowing from Configuration Part.
Thanks AlotHi,
1. In the transaction go to : system->status-> <PROG. NAME>
2. after getting the program name go to SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
once you get the exit you should also be able to find the include name using the where used list, just select the exit and click where used list.
rgds,
venu. -
CProjects - DMS integration:26 036 You are not authorized for with doc.type
Hi Experts,
I need to use cProjects integration with DMS. When I try to create a link to an existing document I find the following error:
26 036 You are not authorized for with document type DRW
My user has authorization to the doc type in the DMS system (linked by RFC to cProjects system). I also have defined the object link in the document type.
Do you know which configuration may be missing?
Thanks in advance!
NeilHi Niel,
How is the RFC connection established between DMS and cProjects system? Do check the authorizations of the RFC user through which the connection is established.
Regards,
Vivek Pandey -
RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED
Hi Gurus,
I am working on 3.5 version. Got the following error messages while trying to retrieve data from Cube.
RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED
RSDRC / FUNC RSDRC_BASIC_CUBE_DATA_GET ERROR IN RSDRC_
RSDRC / FORM DATA_GET ERROR IN RSDRC_BASIC_CUBE_DATA_GE
Data cannot be seen in the report too.
However, PSA displays the data. The request is also green.
This is related to authorizations. Can anybody help?
Points assured.
Thanks.Run Su53 and check the authorization for the user that is getting this error.
Also, check for all the obejcts in the cube, whether any of them are marked "authorization relevant". If so and if you have authorization objects created on them, and have a variable on that characteristic and if values are maintained for that variable, make sure the user who is getting this error has value in that variable.
Ravi Thothadri
Maybe you are looking for
-
Macbook Pro4.1 Cannot Boot Up After Battery Allowed to Drain.
I’m hoping someone can help me troubleshoot some strange behaviour of my Macbook Pro4.1. It’s an early 2008 2.4Ghz Core 2 Duo. I’ve had this running perfectly for the past 2 months with an Apple 65W Magsafe Adaptor, although I recently got an 85w ver
-
How can it transfer pictures from a PC to an ipad
I am trying to take pictures off my dell and put them on my iPad. How can I do so if possible ? Or maybe transfer through iCloud?
-
How to provide Menu Options like BACK in ALV Grid display?
Hi Guys, My problem is after displaying Multiple ALV grids using OO .I was not able to provide Back option and all those are Deactivated onj the Menu bar.So,How to provide those options.?We have a GreenButton with Symbol Correct on that Men
-
SAP Cloud Application Studio How to retrieve the details based on OVS in Product ID
Hi Experts, I have small requirements in AdvanceListPanel. I have custom BO as mention below, businessObject Demo { element ID : ID; node Sporoduct [0,n] { element P_ID : ProductID;
-
CSS in a table: I have a table with background images but I get a white background on the last line. I can´t work out why-I have got rid of the background color and tried to have a background transparent which worked for the radio buttons but the tex