User not deleting using iPlanet Connector

Hello,
I am using iPlanet connector & created a task where users with Employee-Type as Part-Time are provisoned
to iPlanet Resource & user is created in target system,but when i remove that user from Part-Time & set some
other Employee-Type then iPlanet resource is revoked but user is not deleted from target system & it gives
response as user does not exist,but users exist in target system.Could anyone suggest what is missing ?
Thank-You
Rahul Shah

Thanks Kevin
After your reply i checked my Task status & there was 1 task created by me was having status
as Pending,so i tried to delete that task,but was not able to delete that task as OIM does not allow to
delete any task once a task runs , so i renamed it & made conditional & then checked & was working i.e
users were getting deleted from target system.

Similar Messages

Attributes not deleted int the Connector View

when an attribute is deleted in the data source, the corresponding attibute is not deleted in the connector view.
For example :
when a mailforwardingaddress attribute is deleted in the datasource entry, it remains visible in the connector view.
Config :
The UTC uses an attribute flow including mailforwardingaddress,
updates are made only from datasource to CV.
no default values, no filter.
Thanks for any help.
Best regards,
Vincent MAZARD
[email protected]

MEtadir is not attributes owned but entries owned: to do so, you must create a new AF where the criteria is %operation% = DeleteFromCVtoMV and in flow, you choose attributes you want to see deleted
hope it helps

Make a users not to use schema prefix in a query

Hello,
I created a user who has a default tablespace name "USERS", apparently this user need to query tables from another schema, as a result this user need to use the schema prefix to query this table. Now, how can i create the user such that this user does not need to key in schema prefix before querying the table in this schema. Please help
thx
Sam

Hi,
I can see 2 choices:
1/ create SYNONYMs for objects in the target schema. This will allow you to use the synonym for the object. Check in TFM for more infos about SYNONYMs.
2/ use an after logon trigger to define which is the current schema in the session (ALTER SESSION SET CURRENT_SCHEMA=xxx). Note that if you do that, you'll need to prefix the tables of the user if you want to acces them.
Regards,
Yoann.

Automatic reservations can not delete using MBVR

Deatr Gurus
I have searched and searched on this site to an answer to my problem and I can not seem to find it, so your help is greatly appreciated.
I understand that to delete a reservation for an automatic reservation we are to use MBVR.
My problem....When issuing material to a work order, a mistake was made for the material that was issued, successfully reversed the material that was goods issued to the order using a mvmt 262, I am trying to remove this from an automatic reservation that was created so it does not show up as being on a reservation, plus this still shows up on the sales order portion of the RMA and we are having to manually delete it from the sales order..
I have tried to use MBVR, however when I try to run it for the reservation the material is on, it brings back no values....I have then tried to run it for other reservations and it brings back the same results....does not appear to be working. I tried to see if configuration was set up on this and I am unable to locate this to validate. Where do I need to go? Am I on the correct path to remove this from the reservation? Is there another step I am missing?
I see there is a note that I am not sure if I need to apply...note 324544...should I apply this note?
I am hopingthat I am clear and someone will give me guidance on how to do this correctly. Thanks so much for your time

Hi
I am faced with exactly the same problem. Our PM users are reluctant to collect, delete, change or TECO old PM orders. This results in all sorts of issues: Open reservations, planned orders created as a result and converted to requisitions and purchase orders. This again leads to increased stock levels and lower stock turns.
We created a work flow (still testing) that would TECO the work order and subsequently set the final issue indicator on the work order after a set number of days. We also manually set the final issue indicator on the work order resulting in the reservation not appearing in the open reservation list, or taking into account during MRP.
If you come across any other way of fixing this issue, please advise accordingly.
Michael

User Not Found Using Migration Assistant and Time Machine

My iMac running Leopard kernel panicked which forced me to do a hard reset. After rebooting, the account I was logged in as disappeared. Fortunately, that wasn't the admin account. I logged into my admin account and thought I would use Migration Assistant to recreate the missing account (I did run Disk First Aid first to ensure the hard drive was in good working order). However, Migration Assistant does not list the missing user account when reading my Time Machine backup. I do see the user if I go directly into into Time Machine. I'm guessing that Migration Assistant may only be looking at the most recent backup which obviously doesn't contain the missing user.
Suggestions on how to restore the missing user or how to get Migration Assistant to read all of the users in my Time Machine backups?

BobParr wrote:
I'm guessing that Migration Assistant may only be looking at the most recent backup which obviously doesn't contain the missing user.
Correct.
Suggestions on how to restore the missing user or how to get Migration Assistant to read all of the users in my Time Machine backups?
How many backups were done after the problem occurred? One possibility would be to delete those backups (see #12 in the Frequently Asked Questions *User Tip,* also at the top of this forum), so the last one has the missing user's data, and Migration Assistant can find it. If you do that, once everything's properly restored, boot up from your Leopard Install disk, then reboot normally. That will trigger a "deep traversal" in the next backup, where TM will compare everything on your system to it's backups, thus assuring that nothing was lost via the earlier deletions.
Another would be to do a full restore from Time Machine, per #14 in the FAQ.

Autocomplete will not delete using your advise

I have attempted everything you suggest...about 5 times..LOL..and still when I type in a letter all the old autocomplete results come up..and they are NOT bookmarks. I am confused. Can you suggest anything else?

This is the autocomplete drop-down showing history in the url bar ("Awesomebar")?
You should be able to either turn off the display of history or actually delete your history, depending on your preference.
This article addresses the first point: [[Location bar autocomplete]]
If you are using a different field (e.g., search box) or getting a different kind of autocomplete (e.g., search entries), then that is something other than history entries.

Project Online - Can't Delete Resource and User from Delete Enterprise Objects

I would like to link a resource account to a user account but I ran into an error: "The resource account
is already in use.". This is a known issue which I attempted to resolve by following the instructions in KB2881398.
However when deleting the selected resource from Delete Enterprise Objects I get a message indicating success ("The
selected Resources and Users have been deleted.") but the duplicate user is still in the listing in Delete Enterprise Objects and when attempting to link the remaining resource to a user logon account I still get the error
"The resource account is already in use."
Why is the user not deleted even though Delete Enterprise Objects reports success and how can I delete these duplicates to be able to successfully link the account?

Hi,
This might be due to your Exchange Sync issue, where your project workspace is unable to delete that user from local DB. Try following steps to diagnose the problem:
1) Go to your Resource Pool, DELETE a resource.
2) While resource is being Deleted, open another window
Server Settings -> Manage Queue Jobs
3) Here you can view the progress of your current Resource Deletion update, check if all goes smooth and your Resource is deleted successfully by showing process completion 100% :
( to view any error look at the
last column of table on Manage Queue Job page)
4) Cross check your Resource by running Resource Availability Report.
Basically this will give you a fair idea of your resource deletion problems and how system is responding to it.
Regards

How do I make it so that the one computer that has the main itunes account on it be used on other computers, when it comes to backing up phones and not deleting data off of phone that isnt on that computer itunes becasse its all on the one main computer

how do I make it so that the one computer that has the main itunes account on it be used on other computers, when it comes to backing up phones and not deleting data off of phone that isnt on that computer itunes becasse its all on the one main computer. Baiscally the problem is that one comuter and one account has always been sued for eey persons itunes. Now if we want to be able to backup and use itunes on our own computers fro our iphones and such, how will all he data that is on our phones not be deleted once its plugged into a new computer? Also, is theere a way to get all the stuff on thw current itunes onto each computer, via differtn account name?

option discovered in preferences. Really this and any feature that moves deletes or edits a users data should as far as possible be OFF BY DEFAULT. It shouldn't by default and without the users specific say do this dangerous and unnecessary thing without even letting the user know what it's doing!!! And then cause me a few hours (as i'm new to mac) searching for the option so as to switch it off. If i hadn't noticed the status cage declaring that it was copying files then i might never have twigged that this insane thing was occurring. And if i hadn't of noticed i would have been left maintaining the contents of the folder i copied the files to, the folder which as far as i was informed and so believed was also the location of the music files i was playing. How does Apple justify this 'genius' piece of software non-design? Surely it will hurt no one if this was off by default for new users - overall at least i dare say it would cause a lot less distress in the future for the unsuspecting public at large. Thanks for the support.

Using Java Connector Calling RFC.....But it's not returning correct result

Hi Friends,
In the code ....
I am calling Remote Function module ZRFC_PO_VEND_VALID using java connector and passing PO_Number and Vendor Number as input parameters and after execution it returns (E_POVALID =1 [PO_NUMBER exists for Vendor number] otherwise E_POVALID = 0 )
when i am executing the below code ....in both cases it is returning Zero value.
I tested the function module in se37 its working....
may i know the reason for this....
import com.sap.mw.jco.*;
@author Thomas G. Schuessler, ARAsoft GmbH
http://www.arasoft.de
public class TutorialBapi1 extends Object {
JCO.Client mConnection;
JCO.Repository mRepository;
public TutorialBapi1() {
try {
// Change the logon information to your own system/user
mConnection =
JCO.createClient("100", // SAP client
"abap", // userid
"abap", // password
"en", // language
"sapdev1", // application server host name
"00"); // system number
mConnection.connect();
mRepository = new JCO.Repository("ARAsoft", mConnection);
catch (Exception ex) {
ex.printStackTrace();
System.exit(1);
JCO.Function function = null;
JCO.Table codes = null;
try {
function = this.createFunction("ZRFC_PO_VEND_VALID");
if (function == null) {
System.out.println("ZRFC_PO_VEND_VALID" +
" not found in SAP.");
System.exit(1);
//mConnection.execute(function);
JCO.Field vendID = function.getImportParameterList().getField("I_EBELN");
JCO.Field poID = function.getImportParameterList().getField("I_LIFNR");
vendID.setValue("20081");
poID.setValue("4500000017");
try {
mConnection.execute(function);
catch (Exception ex) {
     ex.printStackTrace();
     System.exit(1);
JCO.Field povalid =
     function.getExportParameterList().getField("E_POVALID");
//if (povalid.getValue() == null ){
     // System.out.println("Error Message");
System.out.println(povalid.getValue());
     //if (povalid == null ){
          //System.out.println(povalid.getValue("E_POVALID"));
          //System.out.println("Error Message");
          //System.exit(1);
catch (Exception ex) {
     ex.printStackTrace();
     System.exit(1);
mConnection.disconnect();
public JCO.Function createFunction(String name) throws Exception {
     try {
     IFunctionTemplate ft =
     mRepository.getFunctionTemplate(name.toUpperCase());
     if (ft == null)
     return null;
     return ft.getFunction();
     catch (Exception ex) {
     throw new Exception("Problem retrieving JCO.Function object.");
     public static void main (String args[]) {
     TutorialBapi1 app = new TutorialBapi1();
with warm regards,
Madhu.

Hi Ravi ,
I tried as per your sugggestion..still getting the same problem.
Regards,
Madhu!!

User not found error with Outlook Connector

Hi all
I am having some issues with the Outlook Connector (Version 7.1.222.4 JES2005Q4 running on Microsoft Outlook 2003) when trying to subscribe to a users calendar.
Details:
(SJES2005Q4)
Server 1 - Access Manager
Server 1 - Delegated Administrator
Server 2 - Directory Server 5.2
Server 3 - Messenger Server
Server 3 - Calendar Server
Server 3 - Access Manager SDK
Server 3 - Communications Express
Server 3 - Messenger Express
My setup works fine, I can subscribe to users calendars in Communications Express and modify/delete etc; however, when I try to subscribe to this same users calendar in Outlook I get the following error:
"User not found. Either enter the email id of the user OR click on Search and then click on Find to locate the user."
If I click on search, I get a list of my corporate directory, here I am able to select the user but again clicking ok gives the same result.
Looking at the logs it seems that the search at the point where I click ok is missing the "organizational unit" element of the user DN, logs below:
WHEN INITIATING SEARCH (not enterng userid; instead clicking on SEARCH in the ADD CALENDAR BOX)
[14/Feb/2006:11:23:06 +0000] conn=20255 op=-1 msgId=-1 - fd=175 slot=175 LDAP connection from 172.16.7.132 to 192.168.170.97
[14/Feb/2006:11:23:06 +0000] conn=20255 op=0 msgId=1 - BIND dn="uid=me,ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk" method=128 version=3
[14/Feb/2006:11:23:06 +0000] conn=20255 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=me,ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk"
[14/Feb/2006:11:23:06 +0000] conn=20255 op=1 msgId=2 - SRCH base="ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk" scope=2 filter="(&(mail=*)(cn=*))" attrs="cn mail uid objectClass"
[14/Feb/2006:11:23:06 +0000] conn=20255 op=1 msgId=2 - SORT cn (5)
[14/Feb/2006:11:23:06 +0000] conn=20255 op=1 msgId=2 - VLV 1:1:1:0 2:5 (0)
[14/Feb/2006:11:23:06 +0000] conn=20255 op=1 msgId=2 - RESULT err=0 tag=101 nentries=3 etime=0 notes=U
[14/Feb/2006:11:23:06 +0000] conn=20255 op=2 msgId=3 - SRCH base="ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk" scope=2 filter="(&(mail=*)(cn=*))" attrs="uid mail cn title company telephoneNumber physicalDeliveryOfficeName objectClass"
[14/Feb/2006:11:23:06 +0000] conn=20255 op=2 msgId=3 - SORT cn (5)
[14/Feb/2006:11:23:06 +0000] conn=20255 op=2 msgId=3 - VLV 0:4:0:0 1:5 (0)
[14/Feb/2006:11:23:07 +0000] conn=20255 op=2 msgId=3 - RESULT err=0 tag=101 nentries=5 etime=1 notes=U
NOW SELECTING USERID
[14/Feb/2006:11:23:50 +0000] conn=20255 op=3 msgId=4 - SRCH base="uid=testmail,ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk" scope=0 filter="(&(mail=*)(cn=*))" attrs="cn displayName givenName sn initials uid departmentNumber title homePhone mail manager mobile company pager secretary description facsimileTelephoneNumber l physicalDeliveryOfficeName postalCode st street c telephoneNumber mailAlternateAddress objectClass"
[14/Feb/2006:11:23:50 +0000] conn=20255 op=3 msgId=4 - RESULT err=0 tag=101 nentries=1 etime=0
PRESSING OK (WITH USER ID SELECTED)
[14/Feb/2006:11:24:20 +0000] conn=20256 op=-1 msgId=-1 - fd=225 slot=225 LDAP connection from 192.168.170.99 to 192.168.170.97
[14/Feb/2006:11:24:20 +0000] conn=20256 op=0 msgId=1 - BIND dn="" method=128 version=2
[14/Feb/2006:11:24:20 +0000] conn=20256 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn=""
[14/Feb/2006:11:24:20 +0000] conn=20256 op=1 msgId=2 - SRCH base="o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk" scope=2 filter="(uid=testmail)" attrs="cn uid mail givenName sn icsCalendar"
[14/Feb/2006:11:24:20 +0000] conn=20256 op=1 msgId=2 - RESULT err=0 tag=101 nentries=0 etime=0
[14/Feb/2006:11:24:20 +0000] conn=20256 op=2 msgId=3 - UNBIND
[14/Feb/2006:11:24:20 +0000] conn=20256 op=2 msgId=-1 - closing - U1
[14/Feb/2006:11:24:21 +0000] conn=20256 op=-1 msgId=-1 - closed.
NOW WHEN ENTERING USER ID DIRECTLY (that is NOT clicking on SEARCH in the ADD CALENDAR BOX)
[14/Feb/2006:11:25:16 +0000] conn=20257 op=-1 msgId=-1 - fd=225 slot=225 LDAP connection from 192.168.170.99 to 192.168.170.97
[14/Feb/2006:11:25:16 +0000] conn=20257 op=0 msgId=1 - BIND dn="" method=128 version=2
[14/Feb/2006:11:25:16 +0000] conn=20257 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn=""
[14/Feb/2006:11:25:16 +0000] conn=20257 op=1 msgId=2 - SRCH base="o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk" scope=2 filter="(uid=testmail)" attrs="cn uid mail givenName sn icsCalendar"
[14/Feb/2006:11:25:16 +0000] conn=20257 op=1 msgId=2 - RESULT err=0 tag=101 nentries=0 etime=0
[14/Feb/2006:11:25:16 +0000] conn=20257 op=2 msgId=3 - UNBIND
[14/Feb/2006:11:25:16 +0000] conn=20257 op=2 msgId=-1 - closing - U1
[14/Feb/2006:11:25:16 +0000] conn=20257 op=-1 msgId=-1 - closed.
OUTLOOK CONNECTOR LOGS
02/14/2006 11:25:16.223 (0x0e34) {Addin } [Error ]: wc /get_userprefs.wcap?userid=testmail&id=bo3bn0u68x8sb5rb&fmt-out=text%2Fcalendar
02/14/2006 11:25:16.223 (0x0e34) {Addin } [Error ]: wcap returned errno: 61
02/14/2006 11:25:16.223 (0x0e34) {Addin } [Warning]: LookUpUser getUserPropertiesByEmailID failed : Denied Access
Initially I thought that it maybe something to do with ACI but then the search parameters are not correct at the point of clicking ok.
My Outlook Connector deployment configuration for the "LDAP" tab is as follows:
Search base (root of LDAP directory): ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk
VLV Search filter: (&(mail=*)(cn=*))
Advanced search filter: (cn=%s*),(givenName=%s*),(sn=%s*),(title=%s*),(uid=%s*),(company=%s*),(departmentNumber=%s*),(physicalDeliveryOfficeName=%s*),(l=*%s*)
Name resolution filter: (&(mail=*)(|(mail=%s*)(|(cn=%s*)(|(sn=%s*)(givenName=%s*)))))
VLV sort attribute: cn
Search timeout after: 1minute
Maximum number of search results returned: 10
Require authentification (See Help for LDAP syntax examples): (User DN pattern) uid=%S,ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk
Retrieve user settings from LDAP (User DN pattern): uid=%S,ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk
Does anyone have any ideas?
Thanks
PS: This is also posted in the IMS mailing list, so apologises for duplication to people who visit both forums.

The error was fixed by setting the "Authenticated proxy binding: service.wcap.userprefs.ldapproxyauth" to "yes", this is in the release notes as pointed out by Arnaud Quillaud.
Link: http://docs.sun.com/app/docs/doc/819-5200/6n7a49o0b?a=view

I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.

I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.

The ""not recognized for on-line use". error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs. Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12. A number of slightly different solutions have been reported (though all of a similar nature).
Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected. Without this you won't see the AppData folder in C:\Users\username\
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this doesn't work:
In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following file:iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
If this one didn't work:
Exit iTunes
Check the following folders:
C:\Users\username\AppData\Local\Apple Computer\iTunes
C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
Delete any copies of the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure. If you're still not able to retrieve CD info:
Exit iTunes
In Windows, select Start > Control Panel > Programs and Features. Find the entry for iTunes, right-click and select Repair.
When this process has finished, restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself. If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes.

I down loaded iBank on a trial basis and have decided not to use it. How do I delete the program from my Mac

I down loaded iBank to my computer but have decided not to use it. How do I delete it from my Mac

If the application came with an uninstaller, use it. You can also check the developers site for instructions.
But for the most part, just drag the application to the trash. Some applications come with uninstallers under "options" on the installer.
The reason for this is that in Mac OS X most associated files are kept in the application package itself. If you choose any app then "control-click" on it, you can choose "Show package contents" from the contextual menu and you will see all the associated items.
You can also do a Finder or Spotlight search for any other items but they will probably only be prefs which will do no harm and don't take up much room.
These are ususally just plist files in Users/yourname/Library/Preferences . Also some apps will install files in Users/yourname/Library/Application Support. (To reveal this hidden Library go to your Finder "Go" menu hold the option key to choose "Library"
Note: Some apps may also put a file in /Library/Startup Items or SystemPreferences >> Users & Groups >> Login items. (So, it worth a look here too)
EDIT: Snapped by Paul and RD!

User not found - deleted user

SharePoint 2010. We've migrated domains, one user that was no longer with the company was not migrated to the new domain and was deleted. She had created several subsites that we are no longer able to access, the user not found message.
How can I fix this to access these subsites? The old domain is no longer live
David Scott

the information technology site the deleted user would have had nothing to do with so she must not be the problem.
I get this exact same message on both sites:
User cannot be found.
Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code.
Exception Details:
Microsoft.SharePoint.SPException: User cannot be found.
Source
Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[SPException: User cannot be found.]
Microsoft.SharePoint.SPUserCollection.GetByID(Int32 id) +27292484
Microsoft.SharePoint.Portal.WebControls.CategoryDetail.GetAreaData() +628
Microsoft.SharePoint.Portal.WebControls.CategoryDetail.RenderWebPart(HtmlTextWriter HtwWriter) +264
Microsoft.SharePoint.WebPartPages.WebPart.Render(HtmlTextWriter writer) +155
Microsoft.SharePoint.WebPartPages.SPChrome.RenderPartContents(HtmlTextWriter output, WebPart part) +43
[WebPartException: User cannot be found.]
Microsoft.SharePoint.WebPartPages.SPChrome.RenderPartContents(HtmlTextWriter output, WebPart part) +19801990
Microsoft.SharePoint.WebPartPages.SPChrome.RenderWebPart(HtmlTextWriter output, WebPart part) +64
Microsoft.SharePoint.WebPartPages.WebPartZone.RenderZoneCell(HtmlTextWriter output, Boolean bMoreParts, WebPart part) +1997
Microsoft.SharePoint.WebPartPages.WebPartZone.RenderWebParts(HtmlTextWriter output, ArrayList webParts) +508
Microsoft.SharePoint.WebPartPages.WebPartZone.Render(HtmlTextWriter output) +1000
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +42
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer) +253
System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output) +87
System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer) +53
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +42
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.Page.Render(HtmlTextWriter writer) +38
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4240
David Scott

This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.

I have a client with a BlackBerry Pearl 8110. It was (is) configured to receive email from a Microsoft Exchange Server via his Outlook account. I have uninstalled the Desktop Manager and re-installed ensuring the computer transmits his email via the Re-Director. All settings in the Desktop Manager are correct. The phone was working fine for over 5 years. Now he is getting emails both on his phone and in Outlook saying:
This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.
I have verified that his phone is not attempting to perform the Enterprise Activation process by checking :
Options > Advanced Options > Enterprise Activation.
He does however have a Service Book entitled "CMIME"
How can I resolve this issue?

Is the user needing the Redirector service?
Step 1: If you're not using Redirector or Enterprise, you should uninstall Desktop Manager and then reinstall it using the BlackBerry Internet Service option.
Step 2: On your device, go to: Options > Advanced > Service Book, and delete all service books for [Desktop]
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I can't download track names in iTunes for Mac and get a "User not registered for online use" error

I have a Macbook Pro 13, OS X 10.9.5, and iTunes 12. When I rip a CD it says it can’t find the track names online. When I tell it manually to fetch them it says "User not registered for online use."
On my other Macbook it works fine...

You need to delete two preferences files in your user library. The full instructions can be compiled from various posts in this topic: user not registered for online use I use an older Mac with easy access to the user library before Apple did a mother-knows-best move and hid it in recent OS versions.

User not deleting using iPlanet Connector

Similar Messages

Maybe you are looking for