User not receiving emails she has been copied in to

Hello, we have a user in our office who receives her own emails in to her inbox but also has emails for another user delivered in to a folder within her Outlook so she can review (she is the secretary for this other user).
The issue is that if she is copied in to any of the emails that the other user has been sent she will not receive her copy in to her inbox.
She only discovers the email when she reviews the emails for the other user within the separate folder.
How can we rectify this?
Thank you.

She has an Inbox Rule that moves the messages the other person gets into this subfolder.  You can fix this issue in one of the following ways:
Modify that rule so it only runs if she is not on the message.  This will leave the messages she is a recipient of in her Inbox and will not place them in the subfolder
Create a new rule that applies only to messages she receives.  Have this rule do nothing, and not to run any further rules.  Have this rule run before the troubled rule.  This will also leave the messages she is a recipient of in her Inbox.
Create a rule that copies the current rule except that it also runs only if her name is on the message.  Have this leave a copy in the Inbox, but also put the messages in the subfolder, and have it run no further rules.  Have this rule run before
the troubled rule.  This will leave a copy of the messages she is on the recipient lines for in the Inbox, but it will also put a copy in the sub-folder.

Similar Messages

  • User not receiving emails regarding approval notifications

    Hi,
    SRM system has been upgraded to 5.0.
    User is not receiving emails regarding Approval notifications. However, the user is able to view the SCs pending for his approval in his approval list.
    I checked the transmission of the emails, the approval notifications are sucessfuly sent and the email of the user is correctly maintained. I tried resending the emails, and the user didnt receive emails even then.
    Could be please advice what could the error.
    Thanks
    Hemanth

    Hello Hemanth Kumar,
    If approval mail:
    - is correctly generated,
    - you can see it in SOST transaction,
    - request status in SOST is OK,
    this means SAPconnect is working fine, so your problem does not come from SAP.
    You have to check your STMP gateaway and your mail server.
    Regards.
    Laurent.

  • User not receiving email / corrupt database?

    Much like another recent post, I have a user that can not receive email the emails just sit in the queue.
    The error on those messages is "[[email protected]]: temporary failure"
    Here are the twists:
    1) We had a power spike a couple of days ago. The user's UPS failed and his machine lost power completely. He rebooted and everything else was fine, but he has not received an e-mail since then.
    2) When looking at the list of users on the Server Admin > Mail > Maintenance > Accounts screen, the list in the database stops at the person BEFORE this particular user. They're alphabetical, obviously, so everyone after this person are not listed at all - 13 total missing accounts.
    The kicker is that the rest of us are still receiving e-mail normally!
    Thoughts?!
    Details:
    Mac Xserve running 10.4.11
    Dual 2GHz, and 2GB RAM
    Keep in mind I am NOT a born tech person, have a mild to moderate comfort level with a command-line prompt, and no native intuition for any of this.
    Thanks!
    -Rita

    I'm the consultant that fixed MNX04's server, but it took several attempts.
    the Cyrus reconstruct command failed to resolve the issue, and even removing the user using cyradm, and re-creating them in Workgroup manager didn't fix the problem.
    Pterobyte's mailbfr utility did the trick: mailbfr -f, wait awhile for the repair to run, and all was well.
    I'm grateful for all the help pterobyte has given to people on this forum, but it concerns me a little bit that the Cyrus utilities built in to OS X server can't fix this sort of problem. (However, this is the first time I've run into a problem with OS X mail servers that the Cyrus reconstruct command couldn't fix.)

  • User not receiving Email

    I have a user that can not receive email the emails just sit in the queue.
    The error I see is DBERROR: error fetching user.user: cyrusdb error
    I have ran mailbfr -m twice and restarted the server with no success.
    What is the next step.

    The next step would be to reconstruct the entire cyrus database using mailbfr -f
    It will take a while and you will loose read/unread flags.

  • E6 (Belle) - Phone can sent but not receive emails

    Hello,
    I have set up a 2nd mailbox. The first mailbox functions fine. But with the second mailbox I can send, but not receive emails.
    Has anybody an idea how to solve that?
    Many thanks

    One more try.   The problem here is that I don't have hands-on experience with Belle.  Some backtracking...  I assume that
    1) Your firmware is up to date.
    2) Even manually syncing email doesn't work.
    3) You are not seeing any error messages that would help us track down the problem.
    I did a web search, and found other Belle users complaining about Gmail support, but mostly that push doesn't work reliably.  Manually syncing (or polling every X minutes) still does.  It's a long thread, but you might want to read http://discussions.nokia.com/t5/Messaging-Email-Browsing-and/E-mail-doesn-t-sync-automatically-after... in case any comments help you.
    If none of that helps, try enabling logging.  Within Nokia Email, I have a logging option under Settings -> Global Settings -> Log Output.  It writes at least two files to Phone Memory -> Logs.  In my case, one file logged only GUI calls...and so was useless, and the other file was always empty.  (A third file applied only to Mail For Exchange.)  But give it a try and check the files later for references to Gmail or IMAP.  Read them from a computer if that helps, and then post any relevant portions here.  Also turn off logging when you're finished.
    Again, good luck!

  • Am trying to verify my email contact address. In the confirmation email I received, the link to verify is not active. This has been going on for over 2 weeks now.

    I am trying to verify my email contact address with Apple. In the confirmation email I received, the link to verify is not active. This has been going on for over 2 weeks. They keep sending emails where I can't click on "VERIFY Now".

    In case anyone else has this problem, it turns out that my email provider's software was stripping the link out before it got to my mailbox.

  • Exchange 2013 not receiving emails above 10MB even though MessageReceive Size has been configured

    Exchange 2013 not receiving emails above 10MB even though MessageReceive Size has been configured.
    [PS] C:\Windows\system32>Get-TransportConfig
    AddressBookPolicyRoutingEnabled                             : False
    AnonymousSenderToRecipientRatePerHour                : 1800
    ClearCategories                                            
    : True
    ConvertDisclaimerWrapperToEml                               : False
    DSNConversionMode                                          
    : UseExchangeDSNs
    ExternalDelayDsnEnabled                                     : True
    ExternalDsnDefaultLanguage                                  :
    ExternalDsnLanguageDetectionEnabled                         : True
    ExternalDsnMaxMessageAttachSize                             : 10 MB (10,485,760 bytes)
    ExternalDsnReportingAuthority                               :
    ExternalDsnSendHtml                                        
    : True
    ExternalPostmasterAddress                                   : [email protected]
    GenerateCopyOfDSNFor                                        :
    HygieneSuite                                               
    : Standard
    InternalDelayDsnEnabled                                     : True
    InternalDsnDefaultLanguage                                  :
    InternalDsnLanguageDetectionEnabled                         : True
    InternalDsnMaxMessageAttachSize                             : 10 MB (10,485,760 bytes)
    InternalDsnReportingAuthority                               :
    InternalDsnSendHtml                                        
    : True
    InternalSMTPServers                                        
    : {127.0.0.1}
    JournalingReportNdrTo                                       : <>
    LegacyJournalingMigrationEnabled                            : False
    LegacyArchiveJournalingEnabled                              : False
    LegacyArchiveLiveJournalingEnabled                          : False
    RedirectUnprovisionedUserMessagesForLegacyArchiveJournaling : False
    RedirectDLMessagesForLegacyArchiveJournaling                : False
    MaxDumpsterSizePerDatabase                                  : 18 MB (18,874,368 bytes)
    MaxDumpsterTime                                            
    : 7.00:00:00
    MaxReceiveSize                                             
    : 50 MB (52,428,800 bytes)
    MaxRecipientEnvelopeLimit                                   : 5000
    MaxRetriesForLocalSiteShadow                                : 2
    MaxRetriesForRemoteSiteShadow                               : 4
    MaxSendSize                                                
    : 20 MB (20,971,520 bytes)
    MigrationEnabled                                           
    : False
    OpenDomainRoutingEnabled                                    : False
    RejectMessageOnShadowFailure                                : False
    Rfc2231EncodingEnabled                                      : False
    SafetyNetHoldTime                                          
    : 2.00:00:00
    ShadowHeartbeatFrequency                                    : 00:02:00
    ShadowMessageAutoDiscardInterval                            : 2.00:00:00
    ShadowMessagePreferenceSetting                              : PreferRemote
    ShadowRedundancyEnabled                                     : True
    ShadowResubmitTimeSpan                                      : 03:00:00
    SupervisionTags                                            
    : {Reject, Allow}
    TLSReceiveDomainSecureList                                  : {}
    TLSSendDomainSecureList                                     : {}
    VerifySecureSubmitEnabled                                   : False
    VoicemailJournalingEnabled                                  : True
    HeaderPromotionModeSetting                                  : NoCreate
    Xexch50Enabled                                             
    : True

    hi stephan... lets put in this way... are you sending attachment ...did you checked the max attachment size as mail send size and attachment size are two different things.. please check this for info on different size creteria
    http://technet.microsoft.com/en-us/library/bb124345%28v=exchg.150%29.aspx
    can you please share the output of below three commands... i doubt your receive connector is not configured properly.
    Get-TransportConfig | Format-List -Property MaxReceiveSize, MaxSendSize
    Get-SendConnector | Format-List -Property Identity, MaxMessageSize
    Get-ReceiveConnector | Format-List -Property Identity, MaxMessageSize
    you can also check this link which gives a perfect info on how exchange works for email size... http://rajisubramanian.wordpress.com/2014/01/26/exchange-server-2013-message-size-configuration-detail/
    Mark as useful or answered if my replies helped you solving your query.
    Thanks, Happiness Always
    Jatin
    Skype: jatider2jatin, Email: [email protected]

  • Exchange 2013 SP1 users not receiving quota warning email message

    Hi,
    We are on Exchange 2013 SP1 and Exchange 2010 SP3 co-existence mode and currently migrating users from Exchange 2010 to 2013.  We have noticed that users are not receiving email message when their mailbox quota warning when its near to maximum limit.
    If I log in via OWA it shows the notification (Pop up) that your mailbox is almost full but no message received in email.  Most of the users do not log into OWA but only uses Outlook.
    It looks like other people are also seeing this similar issue but I am unable to find any solution for it.
    How users will know if their mailbox is almost full if they are traveling and only using Mobile phone for emails to send and receive.
    Thanks,
    Raman

    Hi Thanks for your response. Our Quota is set on Database level. I am seeing these event ids as well.
    Log Name: Application Source: MSExchangeIS Date: 12/31/2014 10:07:12 PM Event ID: 1077 Task Category: MAPI Level: Warning Keywords: Classic User: N/A Computer: Exch2013mail01.company.com Description: The mailbox e3d48b23-0740-46ab-89f7-3b035dacf28f on database
    326f0997-4fe5-4b31-873b-6a3396e7a91c is approaching its storage limit. A notification has been sent to the user. This warning will not be sent again for at least twenty four hours.
    ========================
    Log Name: Application Source: MSExchange Store Driver Submission Date: 12/31/2014 10:07:12 PM Event ID: 1012 Task Category: MSExchangeStoreDriverSubmission Level: Error Keywords: Classic User: N/A Computer: Exch2013mail01.company.com Description: The store
    driver failed to submit event 8237691 mailbox e3d48b23-0740-46ab-89f7-3b035dacf28f MDB 326f0997-4fe5-4b31-873b-6a3396e7a91c and couldn't generate an NDR due to exception Microsoft.Exchange.MailboxTransport.StoreDriverCommon.InvalidSenderException at Microsoft.Exchange.MailboxTransport.Shared.SubmissionItem.SubmissionItemUtils.CopySenderTo(SubmissionItemBase
    submissionItem, TransportMailItem message) at Microsoft.Exchange.MailboxTransport.Submission.StoreDriverSubmission.MailItemSubmitter.GenerateNdrMailItem() at Microsoft.Exchange.MailboxTransport.Submission.StoreDriverSubmission.MailItemSubmitter.<>c__DisplayClass1.<SubmitNdrForFailedSubmission>b__0()
    at Microsoft.Exchange.MailboxTransport.StoreDriverCommon.StorageExceptionHandler.RunUnderTableBasedExceptionHandler(IMessageConverter converter, StoreDriverDelegate workerFunction).
    Raman

  • Users are not receiving Email Receipts

    Hello,
    Our issues seem similar with previous discussions regarding email receipts. We have 2 types of users: Those who submit their own data, and those who submit data on behalf of others. Both user types are inconsistently receiving email receipts. For example, a user submitted data on behalf of 10 individuals, but only received email receipts for 5 of those individuals. We have been unable to determine why this person would only receive some of the receipts, and not all. We have verified the emails are not in a trash or spam folder, and we have also verified the forms were completed and submitted.
    Below is an attached screenshot with our Email Receipt setup. Thank you for your time.

    Hi Lucia,
    The user who is submitting information on behalf of other users is only entering their email address once. For example, this user submitted data for 5 people within a 20 minute timespan and received email receipts for all 5 submissions (she is using her email address as the email address of record). She then submitted data for another 5 people in the following 15 minutes and did not receive a single email receipt. There is no difference in the data submitted; she should have received email receipts for all 10 individuals.
    There is also the issue of those who submit their own data and do not receive email receipts.
    Thank you.

  • TS3899 My ipad was working fine but if I go to send an email, a note pops up that my email address has been rejected by the server, what does that mean?

    Hi, my Ipad was working fine but if I try to send an email, a note pops up that my email address has been rejected by the server, what does this mean?  I am still receiving emails and can access websites through Safari.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
    http://support.apple.com/kb/TS1944
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iCloud: Create a group and add contacts to it
    http://support.apple.com/kb/PH2667
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • My Sprint cellphone has not received emails since yesterday and I entered the correct settings incoming and outgoing from my Thunderbird email account, advise?

    I have not received emails on my Sprint Galaxy S3 since yesterday morning. I can send but not receive. I have matched my settings to the phone from my Thunderbird account. I thought I had everything synced. Sprint told me there may have been a change in server settings from Thunderbird but I never received any notification from Thunderbird. I am at a loss and not very good at this so any help will be appreciated.
    If anyone can answer and I don't respond quickly, I will answer as soon as possible. Thank you.

    Thunderbird is not an email provider. It has no servers to have settings to be changed. It is email client software just like the one you have on your phone. You would need to get the correct server settings from your email provider and set your phone to use them correctly.
    Too bad that the "helpless desk" at Sprint is not smart enough to know that.
    Thunderbird software does not run on any mobile phones so troubleshooting your phone is outside the scope of this forum.
    One thought, is your email account set up as IMAP or POP?
    You really need an IMAP account if you are going to use multiple devices to check your email. If you use POP and have your computer set to remove the emails off the server then there are no messages left on the server of your email provider for the phone to download. IMAP email is server based and the messages are left on the server and remotely viewed by the remote devices.

  • Trying to set up an apple id for my daughter but it says that the apple id already exists...but it shouldnt as she has been using my account! not sure how to solve this problem ??

    I have an apple id myself which my children share, i am trying to set up an apple id for my daughter but it says that the id already exists?? which it shouldnt!
    I have tried taking her Mac and ipod off my devices but it still wont let me set it up!! any ideas anyone??

    Hello, Wyseup. 
    Thank you for visiting Apple Support Communities.
    Most likely this email address has been attempted to be setup as an Apple ID at some point.  You can reset your Apple ID password via the steps in the first article below.  If you do not have access to the email account, need assistance or are not receiving the password reset link, see the second article.
    Apple ID: If you forget your password
    http://support.apple.com/kb/ht5787
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Cheers,
    Jason H.

  • HT3376 I am not receiving emails in my Mail account.  However, I am receiving them on my web based yahoo account and on my ipad.  The other strange thing is that on my Mac, I have been receiving emails from Apple.  How can i fix this problem?

    I am not receiving email messages in my Mail account on my Mac OSX.  However, emails are being received on my ipad and my yahoo web site.  Also, all emails from Apple are going through in my Mail account.  How do I fix this problem?

    Well, the other person said theirs was working now. On yours let's try this...
    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup),  it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
    /Users/YourUserName/Library/Mail/MessageRules.plist
    /Users/YourUserName/Library/Mail/MessageRules.plist.backup
    Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

  • HT201320 My email address has been verified, but my icloud account will not complete?

    My email address has been verified, but my icloud account will not complete?

    I have the exact same problem, I even tried changing the password on my e-mail client. Still no luck. Sometimes it downloads the e-mails perfectly, and others, it keeps asking me for the password.
    I've had this problem since I downloaded the last updates to the system about 5 days ago.

  • SharePoint 2010 User Integration with Exchange 2010 New Users Created as Hidden and Later Unhidden not receiving email from SharePoint

    When we have a new employee transfer to us from another department, their email is created and hidden until they actually make the transfer so they don't have two different email addresses in our global address list.  When the transfer is made, the
    email address is unhidden, but then we are unable to send emails to them from sharepoint 2010 without doing an IISReset.  We are using Exchange 2010.  Does anyone have suggestions on how to alleviate this issue?

    Hi,
    I have done a test, no matter the email address is hidden or not, we can both send email to the email address in the same domain.
    How was the new employee from another department transferred to your department?
    Whether sending emails to them need do an IIS Reset everytime.
    Here is a similar post, you can take a look at:
    https://social.technet.microsoft.com/forums/sharepoint/en-US/6a9043bb-2055-46a9-8e76-8b2698c1dbe5/user-not-receiving-sharepoint-emails
    Best Regards,
    Lisa Chen

Maybe you are looking for