User novell CIFS error -1642

Hi,
I have problem with user login to novell-CIFS. User have set Universal password.
Admin log to novell-CIFS successfly.
SLES 10 SP4
OES2 SP3
nmas-method cifslinlsm is installed
lsof -p `pgrep ndsd` | grep CIFSLINLSM[_X64]
ndsd 6017 root mem REG 8,3 630776 3902982 /var/opt/novell/eDirectory/data/nmas-methods/CIFSLINLSM_X64
cifs log
Nov 27 10:33:49 oes CIFS: EVENT: ENTRY: ********** CIFS server started ************
Nov 27 10:33:49 oes CIFS[8340]: WARNING: ENTRY: Auditing interface not initialized.
Nov 27 10:33:49 oes CIFS[8340]: WARNING: RPC: requestNumber: fadebad1 events: 3ff domainpath /tmp/.ncp2cifs
Nov 27 10:33:51 oes CIFS[8340]: WARNING: ENTRY: Interface lo is skipped from populating for name resolution
Nov 27 10:33:51 oes CIFS[8340]: WARNING: ENTRY: Interface sit0 is skipped from Populating for name resolution
Nov 27 10:33:51 oes CIFS[8340]: WARNING: ENTRY: Interface lo is skipped from populating for name resolution
Nov 27 10:33:51 oes CIFS[8340]: WARNING: ENTRY: Interface lo is skipped from populating for name resolution
Nov 27 10:33:51 oes CIFS[8340]: EVENT: ENTRY: CIFS context list initialized
Nov 27 10:59:41 oes CIFS[8340]: WARNING: CODIR: SESNotLoggedIn: Failed to authenticate user: Administrator from 172.16.200.55, nwErr: -1642, cifsErr: 0
Nov 27 10:59:41 oes CIFS[8340]: WARNING: AUTH: SessionSetup : Login Failed -nwLoginError is -1642, cifslogin err 0, dest ip :172.16.200.55
Nov 27 10:59:41 oes kernel: audit(1354010381.426:22): user pid=8340 uid=0 auid=4294967295 msg='CIFS: Failed to authenticate user: Administrator from 172.16.200.55 on Tue Nov 27 10:59:41 2012
Nov 27 10:59:55 oes CIFS[8340]: WARNING: AUTH: Authentication failed due to password mismatch for user , Err :-1642
Nov 27 10:59:55 oes CIFS[8340]: WARNING: CODIR: SESNotLoggedIn: Failed to authenticate user: Administrator from 172.16.200.55, nwErr: -1642, cifsErr: 0
Nov 27 10:59:55 oes CIFS[8340]: WARNING: AUTH: SessionSetup : Login Failed -nwLoginError is -1642, cifslogin err 0, dest ip :172.16.200.55
Nov 27 10:59:55 oes kernel: audit(1354010395.462:23): user pid=8340 uid=0 auid=4294967295 msg='CIFS: Failed to authenticate user: Administrator from 172.16.200.55 on Tue Nov 27 10:59:55 2012
Nov 27 11:10:23 oes CIFS[8340]: WARNING: AUTH: Authentication failed due to password mismatch for user , Err :-1642
Nov 27 11:10:23 oes CIFS[8340]: WARNING: CODIR: SESNotLoggedIn: Failed to authenticate user: Administrator from 172.16.200.55, nwErr: -1642, cifsErr: 0
Nov 27 11:10:23 oes CIFS[8340]: WARNING: AUTH: SessionSetup : Login Failed -nwLoginError is -1642, cifslogin err 0, dest ip :172.16.200.55
Nov 27 11:10:23 oes kernel: audit(1354011023.105:29): user pid=8340 uid=0 auid=4294967295 msg='CIFS: Failed to authenticate user: Administrator from 172.16.200.55 on Tue Nov 27 11:10:23 2012
Novell admin log OK
Nov 27 11:29:47 oes kernel: audit(1354012187.150:35): user pid=8340 uid=0 auid=4294967295 msg='CIFS: User admin successfully authenticated from 172.16.200.55 on Tue Nov 27 11:29:47 2012
Same idea what is wrong ? Thanks

Thanks for reply.
When I settting novell-CIFS. Users 'Administrator' exist. I set universal password for this user (Imanager/Password/Set Universal password) same as in eDirectory.
I try, log user "Administrator" with Novell client, >
Confirm
LOGIN-LGNWNT32-2032: The password for user Administrator has expired.
Do you want to change your password? YES, I retype password. LOGIN-LGNWNT32-2070 Need another password. Password change. logout novell client.
And now I log to CIFS with user Administrator. This is solved.
Thanks you very match, users loging now work.
I have another question about CIFS, we have problem with write speed to CIFS drive-its very slowly, read speed seems OK.
j.
Originally Posted by ab
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
The message states the password is wrong, though I suppose that could
also mean that the username is wrong (just guessing). Does this user
('Administrator') exist, and is its password set as you think it is?
Can you login with that user using any other type of client, such as the
Novell Client, or LDAP, or iManager?
Good luck.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
Comment: Using GnuPG with undefined - Enigmail: A simple interface for OpenPGP email security
iQIcBAEBAgAGBQJQtMKeAAoJEF+XTK08PnB5riYP/0bSRFah8xjwO8HKVu2DaWu4
cpqmQr7uloOdgXe7khb5zWHnekBIWJvA7cFz8Z3iFcwMqX9rxx juUoOB4MX9iVFB
pENajt131g+nyxFZz65p9VIe1RELt88QxccQhr8JBjSVlTqXsv lnuuH4HChDD0uX
R0Qp1RQBUO5p3Z3DDimtZIXzO/iJlJMhurvvkPfa8OVDoH/Uea3DNHj2qe5dHAwr
90eWbgVAKE+n61rHYK9WC3oyqJJyWiXEbAmdiU4EMEtQA52S4K iBMOVeIoRTA01S
eiH5Ek3ljO9GxG6QD0Aa3TFXICbUwnKW2YmdJbBA+x4z/W8ZDtZr4eXBbAOYsWJ0
ARms9dZ2upo7ClIWnxqqSbLSwKmo0QlHTjyP+fCBtdoXd9GKfc gb54qnKKso0qsW
vrVIynCPSUspBIjKIuY0a/+urgbQQDV6qi5C+KbroBIpcvP17wfjpAlYewiL1jNb
zWSqrXnvhwC4RF8fQVOLY90G30B1vXWd2RZj+wKb2E89cXgOw3 JsoxiKqc7TuXiF
rp6zQdClD71gvVcDcJa2RzUF61+KReZwhIWtJVZXkEpS6Zbvm1 86GkGQjM0uXQw2
hqONHfbCyGgn1bLOvZiNdvDQeiuAHN1i9rzfZbp7yJjqGtj8kR/QLRsgFVygXnf8
JUcZZ9knSx+YIB3ZLrzf
=Lrve
-----END PGP SIGNATURE-----

Similar Messages

Miscellaneous Error (-1642)

Please, can somebody help me with this error on my radius server?
Miscellaneous Error 1642
this is the log in the RADDBG file.
Debug logging enabled to file sys:etc\radius\debug\raddbg.log
[2004-10-19 06:27:54 PM] 18) [(ip) 192.168.5.248:1104], Received 52 Bytes
(Access-Request (1))
[2004-10-19 06:27:54 PM] [(total=18) (p=17) (d=0) (r=0) (acc=0) (rej=0)]
[2004-10-19 06:27:54 PM] <5> Done GetNextMessage [(ip) 192.168.5.248:1104]:
time:5958411
[2004-10-19 06:27:54 PM] -------- START : (Access-Request (1)) [(ip)
192.168.5.248:1104]: time:203715714---
[2004-10-19 06:27:54 PM] CACHE:
CacheDomainListExist(radiusserv.radiuser.redes), using cache
[2004-10-19 06:27:54 PM] AuthRequestHandler(), Calling NewRequestHandler.
[2004-10-19 06:27:54 PM] CACHE:
CacheGetEnableCNLogin(radiusserv.radiuser.redes), using cache
[2004-10-19 06:27:54 PM]
(->)CacheGetDNForName:NWDSReadObjectInfo(gcastellano s), succeeded, time:13
[2004-10-19 06:27:54 PM] CacheFindContext - GetParentDN(userDN) (redes)
[2004-10-19 06:27:54 PM] CacheFindContext - tmpContext (REDES),
contextName(REDES)
[2004-10-19 06:27:54 PM] Handling local authentication request.
[2004-10-19 06:27:54 PM] CACHE:
CacheReadSecretForNASAddress(radiusserv.radiuser.r edes), using cache
[2004-10-19 06:27:54 PM]
(->)NDSVerifyAttr:NWDSRead(gcastellanos.REDES,RADIUS :Dial Access Group)
succeeded, time:5
[2004-10-19 06:27:54 PM] (->)NWDSCompare:(gcastellanos.REDES) succeeded,
time:3
[2004-10-19 06:27:54 PM] (->)NWDSRead(gcastellanos.REDES,RADIUS Enable
Attr) succeeded, time:3
[2004-10-19 06:27:54 PM] User Name: gcastellanos, User DN:
gcastellanos.REDES, Domain: , Service Tag:
[2004-10-19 06:27:54 PM] (->)NADMAuthRequest()
[2004-10-19 06:27:54 PM] (->)NADMAuthRequest(gcastellanos.REDES)
failed, -1665 (0xfffff97f), time:172
[2004-10-19 06:27:54 PM] (->)Authenticate (0 policy, NDS pswd) (for
gcastellanos.REDES), failed, -1665 (0xfffff97f)
[2004-10-19 06:27:54 PM] (->)Authentication FAILED
[2004-10-19 06:27:54 PM] ->Sending Access-Reject (3) [(ip)
192.168.5.248(1104)] count=20
[2004-10-19 06:27:54 PM] ->Inserting into RespQ , code(3) id(5).
[2004-10-19 06:27:54 PM] -------- END : (Access-Request (1)) [(ip)
192.168.5.248:1104]: time:203715926---
[2004-10-19 06:27:59 PM] Debug logging disabled
I hope somebody can help to me!!
Thanks and sorry for my bad english!
Genaro Castellanos Lpez
[email protected]
Departamento de Redes
Universidad Iberoamericana Len

Craig is right, this is a problem with NMAS. Craig is correct that RADIUS
does not yet support EAP, but the RADIUS server is not receiving an EAP
request in this case. If the RADIUS server were receiving an EAP request, it
would be returning a -803 (RDERR_NO_SUCH_ATTRIBUTE) error, since it would
not be able to find a PAP or CHAP password attribute in the access-request
packet.
The following snippet from your original message shows the problem:
[2004-10-19 06:27:54 PM] (->)NADMAuthRequest(gcastellanos.REDES)
failed, -1665 (0xfffff97f), time:172
The -1665 error is NMAS_E_LOGIN_ATTRIBUTE_NOT_FOUND. This probably means
that RADIUS is trying to execute a method for which the user does not have
any credentials. For example, I would expect to see this error if you had
configured RADIUS to execute the Simple Password method, but had not set a
Simple Password for the user. Which login sequence have you configured for
your DAS?
>>> Genaro Castellanos Lpez<[email protected]> 10/25/04 3:28
PM >>>
Thanks, I think the error is because i'm using EAP login method and BM does
not support that kind of authentication, please if you know a new issue for
this problem letme know it.
Regards
"Craig Johnson" <[email protected]> escribi en el mensaje
news:[email protected]..
> In article <xridd.7270$[email protected]>, Genaro
> Castellanos Lpez wrote:
>> Please, can somebody help me with this error on my radius server?
>> Miscellaneous Error 1642
>>
> Looks like a password error with NMAS:
>
> http://support.novell.com/cgi-bin/se...?/10074688.htm
>
> http://support.novell.com/cgi-bin/se...?/10087319.htm
>
> http://support.novell.com/cgi-bin/se...?/10074868.htm
>
>
> Craig Johnson
> Novell Support Connection SysOp
> *** For a current patch list, tips, handy files and books on
> BorderManager, go to http://www.craigjconsulting.com ***
>

Viewing CIF errors in SMQ2 - Technical - ABAP

Hello All - I am CIFing the Master data from ECC to APO and i am getting the error. I was debugging the CIF from SMQ2 and i donot see any issue in the code but i am still getting the error in SMQ2 and i could not see the complete error message in SMQ2.Because of the limited space for the field Status in SMQ2.
My question is there any way to read/view the entire message in QRFC ? What is the Tcode ? or Where can i see the CIF error messages in APO..
Appreciate your help.
Thanks,
Venky.
Edited by: GVP2011 on Mar 21, 2011 3:42 AM

Hi Venky,
You can see the CIF error messages in /SAPAPO/C3 transaction in APO and CFG1 in ECC.Here you can directly enter the External ID from SMQ2 or you can see all the error messages via Object "CIFSCM".
I hope this will help you.
Regards,
Saurabh

Problem in primary key column where user does typo error.

Hi all,
I have a primary key in the table that some part of it was the current date. For example if today date is 3rd May then it will contain xxxxxx-0503 (where xxxxxx will be unique for this day). In order save time needed to enter the data, I achieve this by having another (non database) item in the datablock where the user type the xxxxxx part and use a pre-insert trigger to add the '-0503' part to the actual primary key item in the datablock.
This works well if the user enter the xxxxxx part in the non database item correctly. But the problem show up when the users have typo error in the non database item that break the uniqueness of the primary key. Form as usual will tell us that it cannot insert the item but when I try to fix the error, it will report that records has been inserted before. The only solution is to clear form and retype the xxxxxx part.
Anyone have any idea on what is the best method to implement this in form? Thanks in advance for your help.

Marcel,
I cannot reproduce this in version 10.1.2.2. We did not "fix" this, although changes in the runtime might have fixed this "silently". I suggest you upgrade to 10.1.2.2 and see whether you still get the error.
Steven Davelaar,
JHeadstart Team.

Wireless users getting ACL errors when no ACL is in place

We have around a hundred users, many using Powerbooks and MacBook Pros via a third-party wireless. Recently, a few users are reporting errors when connecting saying that they are not on the Access Control List, but we don't use one. I think these users may have updated to the Airport Extreme Update 2007-001, but that is the only possibly similarity I can find. Any ideas?

Hi,
Try to configure the virtual memory in the system configuration of the operating system
Tamir

Another User Modified Table Error.

Dear All,
My Client is using SAP B1 2007 B PL 11, When he is updating the Freight Amount in the Freight Window at that time he is getting the Error of Another User Modified Table Error.
Plz guide me solving this issues.
Regards
Hitesh Parsawala

Hi Hitesh ,
This problem occurs when 2 users access the same form simultaneously .
So just restart the SAP , It will work ..
Hope it Helps
Thanks
-- Ashish Ranjan

Users getting 1460 errors

Some of my users are getting sporadic connectivity to our Border Manager
VPN server. When they cannot connect, the log shows a 1460 error. The
error states the following:
User name miscellaneous error (-1460)
User is rejected
User name miscellaneous error (-1460)
User is accepted
User name miscellaneous error (-1460)
User Access is rejected
Any ideas on how to troubleshoot it as the problem is sporadic?

In article <f%4sd.9135$[email protected]>,
[email protected] says...
> A -1460 error means that the tree key could not be found. This means that at
> least one of the servers in your tree does not have a copy of the tree key.
> If NMAS has to go to a different server to process the authentication (IE:
> some of your users are not in a local writeable replica), then that would
> explain why the problem is intermittent.
>
> You can use SDIDIAG to correct tree key problems. SDIDIAG is available as a
> free download from the support site.
>
> >>> Chris Murzda<[email protected]> 12/03/04 12:46 PM >>>
> Some of my users are getting sporadic connectivity to our Border Manager
> VPN server. When they cannot connect, the log shows a 1460 error. The
> error states the following:
>
> User name miscellaneous error (-1460)
> User is rejected
> User name miscellaneous error (-1460)
> User is accepted
> User name miscellaneous error (-1460)
> User Access is rejected
>
> Any ideas on how to troubleshoot it as the problem is sporadic?
>
>
>
>
Ok, we will try that.

Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.

Error: Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.
The problem is that the SharePoint server will
function just fine for a week or so and then suddenly when a new user tries
to log on they get an error message indicating that not enough resources areavailable to
log them on and also user will to credential prompt while accessing share point site .
Raj

Hi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

'User defined exception error in package OE_SCHEDULE_UTIL' in Sales Order

Dear Contributors,
I am getting the following error while trying to enter line items in the Sales order form. Please provide your valuable suggestion on how to fix this...
User defined exception error in package OE_SCHEDULE_UTIL Procedure Insert_Into_Mtl_Sales_Orders

1004661 wrote:
Dear Contributors,
I am getting the following error while trying to enter line items in the Sales order form. Please provide your valuable suggestion on how to fix this...
User defined exception error in package OE_SCHEDULE_UTIL Procedure Insert_Into_Mtl_Sales_Orders
Please see (ORA-01006 bind variable does not exist FND_FLEX_SERVER during OM Activity [ID 1067359.1]).
Thanks,
Hussein

CIF - error handling and maintance

Hi sap gures
please let me know how to handle CIF errors and how to maintain and support the CIF in the production
supporting project
please help me
Regards
R.suresh Kumar

Hi Suresh,
It is very vital and sensitive to maintain and control cif error
handling. You need to monitor very frequently system for
queue accumulation which leads to lot of errors in system and
affects performance. Controlled monitoring and taking quick
actions will make your life ease.
Also periodically carry out consistency checks to avoid
difference of transactional data between systems as per
recommendations.
Check the CIF job logs in case of any failures and take
necessary actions to avoid recurrence
Regards
R. Senthil Mareeswaran.

APO DP - fcst strategy 56 with user defined fcst error

I am using APO DP V5.
I am using fcst strategy 56 in combination with a user specific forecast error defined by BADI /SAPAPO/SDP-FCSTERR.
The system is not choosing the fcst model with least error (for constant model) - rather it seems to be choosing the model with the 'initial value' of alpha specfied in the fcst profile.
Has anyone had problems in this area?
Thanks, Bob Austin

Hi Bob.
Not the answer, but maybe a clue.
Check the entries in the table /SAPAPO/FCST_56 using SE16 after running the forecast interactively to see the alpha optimisation error values. User Exit values should be included.
Hope this helps, Mark.

CIF Error while transferring vendor

We are facing CIF error while transferring vendor master to APO.
The issue is in e-mail address of the vendor master.
One way is to correct the e-mail addresses - one per line without semicolon at the end.
But the issue list is very huge to get it corrected.
Is there any other way by which we can exculde the e-mail addresses or its validation?
Thanks and regards,
Sushant

Hi Senthil,
The objective was to avoid CIF error due to incorrect address setup. This required us bypass it before data transfer. We could fix this using enhancement in ECC.
Apreciate your kind reply, though. Thanks a lot.
Warm regards,
Sushant

User-exec 3 error in Nokia 5233

I have installed games in Nokia 5233 & played on it. But I have used App Manager to remove unwanted softwares which i have installed & with that some problem has occurred & now when i start the game it shows "Application Closed: Main USER-EXEC 3 "error. Please If someone can help me in solving this problem.

Try re-installing the game... It seems some software attached to the game also got un-installed with some other application..
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Watch ESPN - User not authorized error

I'm a U-200 subscriber, I get all of the ESPN channels on u-verse. I recently moved to Kansas City from Chicago, and since the move I haven't been able to access Watch ESPN online. I've tried from my laptop, phone and two different tablets. I just get the User Not Authorized error. Does anyone know how to fix this? I don't have time to spend an hour on hold waiting for tech support.

I'm a U-200 subscriber, I get all of the ESPN channels on u-verse, and also BTN, NBCSN, etc.. I recently upgraded from Internet U-verse only to U-200 and Internet, switching from DirecTV. Unfortunately, when I try to use TV network apps on my iPhone and iPad (like ABC, Watch ESPN, NBC Sports Live Extra, Fox, BTN2Go, etc), after selecting ATT U-verse as my participating TV provider and entering my U-verse credentials, I just get the User Not Authorized error from every single app. Does anyone know how to fix this? I don't have time to spend an hour on hold waiting for tech support, and I am about to switch back to another provider after only three days with U-verse. Examples of errors: NBC Sports Live Extra: "We're Sorry it looks like you're not a subscriber to this channel. Please contact you're provider."ABC: "Error code:400-1. Unfortunately, you cannot access this content. Please contact your TV provider for further assistance."BTN2Go: "User is not authroized to this content."Watch ESPN: "Unable to play video. You are not authorized to play this content. Please contact your provider." Can someone please help??? Talked with two techs who have basically thrown up their hands saying they cannot help. Update on 6/9: So I sent a PM to ATTU-verseCare and quickly got a response from SadathCS. He called me and noticed that when I upgraded from Internet Only Uverse, the database they use to authenticate TV subs on these apps was not properly synched after my upgrade to the TV/Internet account bundle. He forced the sync and it is now working. Thanks SadathCS! issue solved.

CIF errors due to material status

Hi All,
We are having lot of CIF errors due to material status "40" in CIF, which restrict creation of P.reqs and PO at source location.
Eg:- LOC1 is a manufacturing location and LOC2 is a Distribution centre. A new Product A introduced at both location, having status status "40" at both the location.
When APO creates P.Reqs with source as LOC1 and Destination as LOC2 for this product, these p.reqs get stuck in CIF queue, as plant specific status "40" doesn't allow creation of P.Reqs at LOC1 in ECC.
We thought of creating a new status "Z1", which would allow the creation of P.Reqs and PO. But the requirement was to allow only creation of P.Reqs and not PO. But in the config setting in ECC for material status there is common setting for P.Reqs and PO and cannot be differentiated.
Have anybody come across such problem and whats the way to address this issue.
Thanks & Regards
Shankar

Hi Shankar,
Please check list of enahncements in SMOD transaction. The enhacements related to Purchase documents start with "CIFPUR.."
Or other path in SPRO is as below:
In the ERP system under Integration with Other SAP Components >> Advanced Planning and Optimization >> Application-Specific Settings and Enhancements >>Settings and Enhancements for External Procurement.
Because of the blocked status of the material ,while transferring the PR/PO data, the CIF prrogram -function call for creating the purchasing document does not get triggered. As written in earlier mail, the enhancement on SAP ECC inbound may not help, because, the material status is picked up from ECC ( or SAP R/3) material master data and not taken from APO.
Neverthless, you may please have a look at these enhancements.
I hope this gives insight to you.
Regards
Datta

User novell CIFS error -1642

Similar Messages

Maybe you are looking for