User Object -- Object tab

What is 'Modified' in object tab of AD User account
I Presumed that it shows the date and time of the recent changes done to that account like password reset, lockout, Unlock, etc
But when observed I found that modified date is changing with out any changes done by me. If that denotes any other changes done to that account if any system related, what are those?
1. under what circumstances date will change.
2. If I enable auditing, will those changes made by system audited?

Hello,
This is whenChanged attribute. This attribute specifies the date when this object was last changed. This value is not replicated and exists in the global catalog.
http://msdn.microsoft.com/en-us/library/cc221004.aspx
http://blog.joeware.net/2006/10/03/655/
More Info:
https://social.technet.microsoft.com/wiki/contents/articles/6822.active-directory-attributes-in-the-aduc-gui-tool.aspx
Regards

Similar Messages

Option 'Maintenance Order' missing in 'Allowed Object Types' tab in IMG of User status Profiles

Dear All
I have created a User Profile using T-Code OIBS.
Now I want to assign that User Profile to Maintenance Order. But in the 'Allowed Object Types' tab, the option "Maintenance Order" is missing due to which I am unable to assign it to Maintenance Order.
Could anyone tell how to add the option "Maintenance Order" in 'Object Types'.
Thanks in advance.
BK

Hi Peter
Thanks for your help.
I just found that in t-code BS13, the object categories ORI and ORH exist but 'No Status Profile' check is marked against them. That is the reason why the system is not showing the 'Maintenance Order' as an option in Allowed Object Types.
Thanks a lot !
Best Regards,
BK

Problen in ChooseFromList & User Defined Object

Hello.
I'm trying to use a [ChooseFromList] that calls info from one User Table called @LABS this table is MasterData type.
I add a User Defined Object in runtime, called UO_Labs
Then, I add one ChooseFromList to my form (This form was made in ScreenPainter)
The user object was created fine, the ChooseFromList is added fine, the form loads fine, but, when I press tab or the button of the ChooseFromList I get this error: "Internal error (-1003) ocurred [Message 131-183]"
I try to use my ChooseFromList in one Matrix and in one EditText objects. And gives me the same error in both objects.
I'm using SAP 2007 PL 35
This is my code:
Adding the User Defined Object -
Dim UO As SAPbobsCOM.UserObjectsMD
UO = CompanyObj.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserObjectsMD)
UO.ManageSeries = SAPbobsCOM.BoYesNoEnum.tNO
UO.CanCancel = SAPbobsCOM.BoYesNoEnum.tYES
UO.CanClose = SAPbobsCOM.BoYesNoEnum.tYES
UO.CanDelete = SAPbobsCOM.BoYesNoEnum.tYES
UO.CanFind = SAPbobsCOM.BoYesNoEnum.tYES
UO.CanLog = SAPbobsCOM.BoYesNoEnum.tNO
UO.CanYearTransfer = SAPbobsCOM.BoYesNoEnum.tNO
UO.CanCreateDefaultForm = SAPbobsCOM.BoYesNoEnum.tYES
UO.Code = "UO_Labs"
UO.Name = "Laboratory Info."
UO.ObjectType = SAPbobsCOM.BoUDOObjType.boud_MasterData
UO.TableName = "LABS"
If UO.FormColumns.Count = 0 Then UO.FormColumns.Add()
UO.FormColumns.SonNumber = 0
UO.FormColumns.FormColumnAlias = "Code"
UO.FormColumns.FormColumnDescription = "Code"
UO.FormColumns.Add()
UO.FormColumns.SonNumber = 0
UO.FormColumns.FormColumnAlias = "Name"
UO.FormColumns.FormColumnDescription = "Name"
If UO.Add() <> 0 Then
      Application.MessageBox(CompanyObj.GetLastErrorDescription)
End If
END Adding the User Defined Object -
This code adds my UDO and it works fine, has data and do the work.
Adding the [ChooseFromList] Object -
'// form object is send in parameters.
Dim oCFLs As SAPbouiCOM.ChooseFromListCollection = f.ChooseFromLists
Dim oCFL As SAPbouiCOM.ChooseFromList
Dim oCFL_CP As SAPbouiCOM.ChooseFromListCreationParams
Dim matrix As SAPbouiCOM.Matrix = form.Items.Item("matrix").Specific
oCFL_CP = App.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_ChooseFromListCreationParams)
oCFL_CP.MultiSelection = False
oCFL_CP.ObjectType = "UO_Labs"
oCFL_CP.UniqueID = "cfl_Labs"
oCFL = oCFLs.Add(oCFL_CP)
matrix.Columns.Item("labCode").ChooseFromListUID = "cfl_Labs"
matris.Columns.Item("labCode").ChooseFromListAlias = "Code"
form.Refresh()
END Adding the [ChooseFromList] Object -
Thanks for your time...
Greetings
Gabriel Vasquez.

Hi Gabriel,
Please check in B1 if the UDO is created correctly, specifically the CanFind option. I got that error once, with one of my addons, that somehow was created with CanFind=tNo, despite my code indication CanFind=tYes...
Also, try adding the CFL directly in the XML form.
   <column uid="C_labCod" type="116" title="Lab. Code" description="Laboratory Code" visible="1" AffectsFormMode="1" width="70" disp_desc="1" editable="1" right_just="0" val_on="Y" val_off="N" backcolor="-1" forecolor="-1" text_style="0" font_size="-1" ChooseFromListUID="cfl_Labs" ChooseFromListAlias="Code">
      <databind databound="1" table="@LABS" alias="U_labCode"></databind>
      <ExtendedObject linkedObject="" LinkedObjectType=""></ExtendedObject>
   </column>
   <ChooseFromListCollection>
      <action type="add">
         <ChooseFromList UniqueID="-1" ObjectType="-1" MultiSelection="0" IsSystem="1"></ChooseFromList>
         <ChooseFromList UniqueID="cfl_Labs" ObjectType="UO_Labs" MultiSelection="0" IsSystem="0"></ChooseFromList>
      </action>
   </ChooseFromListCollection>
Also, it's a good practice to your SAP partner's NameSpace as prefix to UDOs, UDTs, UDFs and UDKeys, in order to avoid conflicts with other partner's add-ons.
Regards,
Vítor Vieira

Restrict to View AD objects security tab in ADUC (Dsa.msc)

Restrict to View AD objects security tab in ADUC (Dsa.msc) ?

In the Group Policy window
please navigate to User Configuration -> Administrative
Templates ->
Windows Components -> Windows
Explorer and open Remove Security tab
The Default state
is Not Configured and Security
tab is Enable
To Enable Security tab select Disable
To Disable Security tab select Enable
MD Disclaimer: The opinion expressed herein are my own knowledge. Deploy this at your own risk. Whenever you see a helpful reply, just click on “Propose As Answer” / “Marked As Answer” and please do "VOTE".

Crystal Report Templates for User-Defined Objects

Hello Experts,
I am running SAP B1 8.8 PL11. In the current patch SAP has default Crystal Reports that can be used as Layouts for Invoices, Credit Memo's so on. Is it possbile to have layouts for user defined objects ( say for instance i have a customized form under sales module, can i import a crystal template for this customized form?). In the report layout manager i don't see an option to import user-defind objects.
Any help would be appreciated.
Thanks,
Praneeth

If this is still a problem please re-post to the SAP Integration Kit forum.

How can i send user defined Object as a argument to the MBean methods in authentication provider to create user?

I developed our own Authentication, Identity Assertion & Authorization providers
for weblogic 8.1 SP1. In the authenticator MBean i have one method which takes
user defined object as a argument and returns a user defined object. i am able
to call all the methods which takes java objects(for example: String, int, ArrayList,
HashMap, Etc...) as a argument and returns also a java object but when i user
any user defined object then it gives exception. if in the argument i used user
defined object then it is not able to call that method telling NoSuchMethodException.
Is there any way to use user defined object as an argument to MBean method?
can anyone please help us as we r in the final stage of the project?
Thanks
Lakshmi

"Lakshmi Padhy" <[email protected]> wrote in message
news:3fc2f50c$[email protected]..
>
I developed our own Authentication, Identity Assertion & Authorizationproviders
for weblogic 8.1 SP1. In the authenticator MBean i have one method whichtakes
user defined object as a argument and returns a user defined object. i amable
to call all the methods which takes java objects(for example: String, int,ArrayList,
HashMap, Etc...) as a argument and returns also a java object but when iuser
any user defined object then it gives exception. if in the argument i useduser
defined object then it is not able to call that method tellingNoSuchMethodException.
>
Is there any way to use user defined object as an argument to MBeanmethod?
>
I seem to remember that jmx only supports scalar datatypes. Ask in the
weblogic.developer.interest.management newsgroup.

DOBJ.UPDATE_FAILED error while attaching adapters to Users Data Object

PROBLEM DESCRITPION:-
The following error occured while trying to attach entity adapters to Users Data Object (com.thortech.xl.dataobj.tcUSR) in Post-Update section.
Error Message: The security level for this data item indicates that it cannot be updated.
Update failed.
Update failed.
Error Keyword: DOBJ.UPDATE_FAILED
Description: Update failed.
Action: E
Severity: C
Kindly suggest to fix this issue.

Resolved the DOBJ.UPDATE_FAILED problem - I modified the dvt_data_level to 0 for dvt_post_update_sequence selective entries.
Able to attach the custom event handlers to Users Data Object - No more DOBJ.INVALID_UPDATE error!

Manual document number in User-Defined Object

Hi Experts,
I have a user-defined object of document type. I am trying to post a document using the General Service. However, I cannot assign manual document number. There is no handwritten property available. Is it possible to assign manual document number in user-defined objects using the DI API?
Thanks.
Melvin

Hi,
This issue has been resolved. For the benefit of those who will be encountering this error, it was resolved by manually assigning the Handwrtten field to 'Y'. Here is the code fragment:
shipmentHeader.SetProperty("Handwrtten", 'Y')';

Key focus is not visible for all objects when tabbing

I'm using LabView 5.1.
The key focus is not visible for all objects when tabbing through a "disabled and grayed-out" object.
For example, let's say I create a panel with 3 buttons. If I create a "disabled" attribute for button 2 and assign the value "2" (disabled and grayed-out) to it. When I will run this VI, the key navigation will go through button 1 and button 3 (skipping button 2 as expected) but the key focus on button 3 will not be visible.
Is this a bug with LabView or am I doing something wrong ?

Hi Ben,
Don't worry, time is not an issue... I'm posting an example of a VI with the problem I described. I noticed that the problem occurs only with "dialog buttons".
When you have time, let me know if you see the same behavior. If you do, I will report the problem to National Instrument.
Thanks for your time !
BigBen
Attachments:
3buttons.vi ‏22 KB

DTW user-defined object issues

Dear all,
I've tried to import a user-defined object with a template through DTW.
However, I got an error message "To generate this document, first define the numbering series in the Administration moduleApplication-defined or object-defined error.
Any ideas?
Pls help.
Thanks

Hi,
It is a limitation of the UDO that it is not possible to enter new values via DI or DTW.
There is a way to automatically fill your object's user tables. Please see the Note [804685|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=804685] for more details regarding the issue description and the workaround available.
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team

UDO--user defined object

how to use UDO--user defined object in sap b1????

Creating UDO in SAP B1
1. Create UDT, ( Create UDT as Document if want the code to be in auto increament form)
2. Create UDFs for created UDT,
3. Register Object using "Object Registration Wizard",
(a) Put UDT's unique name in "UNIQUE ID" field of UDO (Image - UDO01.jpg) ,
(b) Do further as per requirements,
4. After Registering the UDO, you can access it from where you have set it to access (@ UI Settings of "User - Defined Object Registration Wizard"),
5. If you wana change the field location / change the design of the form, Open screen painter as and click on "Open User Defined Object List " (Mostly 3rd icon from Left in screen painter),
6. Make required changes and save it by clicking "Save Form To Database" ( Mostly 2nd icon from Left in Screen Painter),
7. Now the UDO is ready and can be used by user.

Transfer user defined object between 2 databaeses

i have created a user defined object in my local db.
i need to import it to the companies server.
what should i do ?

If you are talking about the definition - you can use the Copy Express Add-On from SAP.
Regards

How to assign a query retrived value to a user defined object in a table

how to assign a query retrived value to a user defined object in a table

Rajeshwar,
If you use the "Search" feature in this forum, you should be able to find helpful links to similar questions. You could also look at the RecordSet and DoQuery documentation in the SAP Business One SDK Help Center documentation to assist you with your question.
HTH,
Eddy

Wanting to copy DOM element child value into user defined object in PL/SQL.

We have a DOM object and can retrieve the object elements. We are wanting to take the elements and map them to user defined object attributes. We want to then place the element child (the text portion of <item>Foo</item> into the object attribute. Is there a package or utility that is available where we can simply pass the DOM and user defined objects and "magic happens here"?

We have a DOM object and can retrieve the object elements. We are wanting to take the elements and map them to user defined object attributes. We want to then place the element child (the text portion of <item>Foo</item> into the object attribute. Is there a package or utility that is available where we can simply pass the DOM and user defined objects and "magic happens here"?

How to clone a user-defined object?

Hello,
I need to clone an Object[] array (propArray) that holds objects of Integer, Double, Boolean type, along with objects of user-defined ClassA, ClassB, ClassC type. The matter is that the ClassA object isn't being cloned, while the rest of the user-defined objects are cloned just fine.
In more detail, ClassA has two properties:
public class ClassA implements Cloneable{
   private String penaltyFor;
   private Penalty[] penaltyArray;
   protected Object clone(){
      try{
         ClassA o = (ClassA)super.clone();
         o.penaltyFor = this.penaltyFor;
//         o.penaltyArray = (Penalty[])penaltyArray.clone(); //This ain't working.
         //But neither does this :(.
         int penCount = this.penaltyArray.length;
         o.penaltyArray = new Penalty[penCount];
         for(int i = 0; i < penCount; i++)
            o.penaltyArray[i] = (Penalty)this.penaltyArray.clone();
return o;
} catch(CloneNotSupportedException e){ throw new InternalError(); }
The Penalty class contains properties of primitive type and here is its clone() method:
public class Penalty implements Cloneable{
   private String penaltyDesc;
   private int lowLimit, upperLimit, penaltyValue;
   protected Object clone(){
      try{
         Penalty o = (Penalty)super.clone();
         o.penaltyDesc = this.penaltyDesc;
         o.lowLimit = this.lowLimit;
         o.upperLimit = this.upperLimit;
         o.penaltyValue = this.penaltyValue;
         return o;
      } catch(CloneNotSupportedException e){ throw new InternalError(); }
   }I don't know what else to try. I suppose the problem is the Penalty[] array, but I may be wrong. An alternative would be to use Copy Constructors, but it will cause too many changes to the code, since the clone() method is used for the propArray copy in many places and the ClassA object is a late addition to the propArray (unfortunately it wasn't planned to exist from the beginning).
Thank's.

class ClassA implements Cloneable{
   private String penaltyFor;
   private Penalty[] penaltyArray;
   public Object clone(){
      try{
         ClassA o = (ClassA) super.clone();
         if (penaltyArray!=null){
            o.penaltyArray = (Penalty[]) penaltyArray.clone();
            for(int i = 0; i < penaltyArray.length; i++) {
                Penalty penalty = this.penaltyArray;
if (penalty!=null)
o.penaltyArray[i] = (Penalty) penalty.clone();
return o;
} catch(CloneNotSupportedException e){
throw new InternalError();
class Penalty implements Cloneable{
private String penaltyDesc;
private int lowLimit, upperLimit, penaltyValue;
public Object clone(){
try{
return super.clone();
} catch(CloneNotSupportedException e){
throw new InternalError();
If your Penalties are immutable, you don't need to clone them -- rather,
make then unclonable, like Strings.

EJB : How to return user defined object

hi,
i am a newbie in EJB. i have the following simple problem:
public interface MyApp extends EJBObject
public String getResult() throws RemoteException;
}the above code will be ok because it is returning String object.
however, i need to return a user defined object like:
public interface MyApp extends EJBObject
public MyResult getResult() throws RemoteException;
}then i got java.lang.ClassCastException during runtime.
please tell me how to resolve this problem.
thank you very much

since you are a newbie, let me explain something to you. Ask your question in the proper forum. In case, you still don't understand there is a forum for EJB questions.

User Object -- Object tab

Similar Messages

Maybe you are looking for