User of Final Cut Pro X wants sound editing

Hello
Logic Pro looks good.
Does it integrate well with FCPX for editing sound on timelines?
Thanks

Might want to check these.
https://discussions.apple.com/message/22662134#22662134
Evidently some data is not transferred, there were a couple of other discussions regarding your subject but I can't find them.

Similar Messages

New User to Final Cut Pro X

Hello,
I am a new user to Final Cut Pro X and am trying to figure out how to add a photo collage 3+ pictures to my edit film? Any ideas or suggestions?
Thanks Greatly

We really need a visual example as your request could mean many different things.
Assuming you want one or more pictures superimposed on the timeline, stack the pictures above each other, select each in turn, apply the transform tool, resize and reposition them.

How well will a 15.4-inch MacBook Pro 2.0GHz Quad-core Intel i7 work with Final Cut Pro X for video editing 4K

How well will a 15.4-inch MacBook Pro 2.0GHz Quad-core Intel i7 work with Final Cut Pro X for video editing 4K

It will work just fine. I would max out the RAM

Can I migrate an iMovie project to final cut pro and keep the edits intact?

can I migrate an iMovie project to final cut pro and keep the edits intact? It may be a solution to my apparently corrupted iMovie

The manual tells ..
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver41812c7c
keep in mind: just the 'plain cuts', not the eye-candy iMovie offers, wil be transfered.
unfortunately it says ...:
You initiate the process from within iMovie. The project file and the media used in the project are copied to your Final Cut Pro library.
For more information, see iMovie Help.
so, if your iM doesn't work anymore, you can not transfer.
plus, my personal opinion!, I would start from scratch in FCPx...
What issues in iM do you expect FCPX to solve,...?

Handicap/Disabled user of Final Cut Pro

I am teaching a Final Cut Pro Editing class at San Francisco State University. One of my students has cerebral palsy. He is extremely bright and very determined to learn to use FCP despite his limited motor skills. (He types with one finger and can use the mouse but cannot work with two hands at the same time.)
Does anyone know about special hardware configurations for users who have physical impairments like my student?
Thank You

I occasionally work with adults and children who have learning difficulties and I would agree with the suggestions of the other posters.
I am sure your University will have Learning Support teachers who can give you more specific professional advice.
I am disappointed that you refer to your student as Handicap. The term means you have made him put his hand in his hat to deprive him of equality.
More appropriately, your student will have learning needs, as we all do.
In the organisations I work with, they must by law have a written policy of Inclusion, a statement that the organisation will have equal opportunities for everyone, the terms Handicap and Disabled do not appear.
I commend you for taking the time to find out how to assist your student.
Gary

Final Cut Pro logo wanted for end credits

Is there somewhere I can download an Apple Final Cut Pro logo for insertion at the end of my project, in the credits... something to the effect of... 'Edited with Final Cut Pro' in the FCP font from Apple ?
thanks in advance.

I found the same thing after Googling "edited by final cut pro logo"
MacBook Pro, Dual Core 2.16 Mac OS X (10.4.8) Keyboard protected with leather

Final Cut Pro 2 Studio CORPORATE EDITION ???

i am looking to buy final cut from someone on craigslist - they say that it is a CORPORATE VERSION of FINAL CUT PRO 2 STUDIO - i asked if it was transferable and they said that i could not register it in my name but i would be able to upgrade it - is this true ?? - should i stay away

'Corporate' is a code word among warz dudes and dudettes. It's supposed to mean you can install it and not get caught for using an invalid serial number.
In this case, I suspect the seller is trying to give the impression the SN is a Volume License, usually purchased by corporations. That's why you would not be able to register it, and also the why you would not be able to upgrade it.
Run away from this one. It's a scam.

Final cut pro nice professional sound monitor speakers

I would like some nice book shelf style nice looking sound monitor speakers for my mac pro, when you see people with edit suites in a edcit studio on TV they always have some sexy looking bookshelf speakers, any ideas where to buy these and which are very good at sound monitoring?
Daz

Best to visit a Pro Audio store - one that caters for musicians/pro audio engineers. Tell them you need "Near-field monitors", but your budget is limited. Seriously - audio engineers spend more on their near-fields than I spent on my plasma monitor. There are two types - self-powered, which have internal amplification, and those needing amplification, in which case a standard hi-fi amp should do you. There is a price differential, of course, and it is also brand dependent. I am still getting good service out of a pair of Spirit Absolute Zeros, which are around ten years old.
Another consideration is: how far can you separate them from your video monitors? If they are unshielded, their internal magnets will interfere with your picture or your screens if too close - shielded will cost more.
j0nn0

Final cut pro x export/sound issue

I'm trying to export WITHOUT sound but sound always is included. How to fix? Method:
Share; Master File (Export); Settings; Video Only; H.264
I need a solution now.
Please be specific. thanks in advance

Tom Wolsky wrote:
That sounds like a good thing, doesn't it?
It is almost never a good thing if a program "lies" to you. It says you are going to replace a file with a new one. You click "Replace". And silently the program "decides" it is not worth it, because it will be the same. At the very least, you should be warned that no export would take place.
And it is even worse if, say, you exported without audio, and suddenly realized it that was not what you wanted. You export again, making sure you selected Video and Audio. You confidently click "Replace", and copy the file you *thought* you had just created, and send it, or upload it somewhere. You won't have replaced anything, and will submit a video without audio, when you explicitly "exported" it with audio.

KONA users running Final Cut Pro X with KONA 3G, KONA 3, or KONA LHi look here!

AJA has posted info about how to use their stuff with FCPX:
http://www.aja.com/news/index_article.php?id=147
Hope this helps some of you guys.

Interesting, thanks for posting it. It seems to keep the disconnect between the editing system and the rest of the world. No offline/online, tons of storage demand. I can't work with proxy files from other apps like CatDV.
I'm staying with 7. At least it deals with the real world.

Final Cut Pro 7 Sound Card Problem...

Hello,
Im not really sure how to even explain my problem but Im going to try because Im going nuts over here.
I just bought a mbox 2 mini and am using it as a soundcard. Usually everything works fine but sometimes when in FInal Cut Pro 7 the sound drops out completely and my speakers become silent with the exception of a "put...put...put...put..put" sound. Gradually gets softer until it dissapears...and then it gets loud again and repeats.
Any ideas?

If your audio track has something other than a 48 Khz sampling rate, it will just beep beep on playback until you render it. I never heard it fade out and then get louder though -- possibly because I know exactly why it's doing that and never listened long enough??
I guess you will either have to wait for someone that also uses that device to read your post or mail their support people directly.

FINAL CUT PRO 7 - Please Help!

Suddenly my final cut pro project is unreadable -- the clips on the timeline are now grey and they don't show on the viewer anymore. The audio is inaudible, except for some weird cracking sounds. What is going on?? Please help me!

Hey Cecilia153,
Thanks for the question. In troubleshooting this issue, a great place to start would be to delete the user preferences:
Final Cut Pro 7: Troubleshooting Basics
http://support.apple.com/kb/TS1846
Remove receipts and reinstall Final Cut Pro
Another approach you might consider is reinstalling Final Cut Pro 7. To do this effectively, you need to remove the application and its receipts, then install Final Cut Pro 7 and use Software Update to install additional updates. You don't have to remove everything that was installed with Final Cut Pro 7. Follow the steps below to completely reinstall a fresh copy of Final Cut Pro 7.
Next, see if you can locate the media in Finder and attempt to open it with Quicktime. If the media is not damaged, and plays fine, you might need to reconnect it to Final Cut Pro:
Final Cut Pro 7 User Manual: Reconnecting Clips to Media Files
http://documentation.apple.com/en/finalcutpro/usermanual/index.html#chapter=92%2 6section=6%26tasks=true
Reconnecting Clips to Media Files
Clips in your project don’t have to be offline for you to use the Reconnect Media command. You can reconnect media files to clips in your project at any time, since all you are doing is changing the file path stored in the clip’s Source property.
Thanks,
Matt M.

AppleScript help please: Final Cut Pro / selecting drop down items

Hi,
I am wondering if anyone can help guide me wih a spot of AppleScript?
I'm new to it as of tonight (last time I made a script was 11 years ago, and that was a very basic one!).
Basically, my problem is I have a long term bug in Final Cut Pro which causes it to crash on launch everytime, unless I delete the Preferences file first.
(btw This problem exsisted in Snow Leopard and has continued with Lion. I think it is plug-in related, but I've never figured out which or why, and have had a topic ongoing on here int he FCP forum for some time with no luck).
Anyway, so far I have made a script which trashed the preferences and launches the program, like this:
try
          do shell script "rm /Users/redhavoc/Library/Preferences/Final\\ Cut\\ Pro\\ User\\ Data/Final\\ Cut\\ Pro\\ 7.0\\ Prefs.fcset "
end try
delay 1
tell application "Final Cut Pro" to activate
So far, so good.
However, what I would REALLY like to do, is continue this script to reset all the preferences automatically!
When launching FCP (as the preferences are gone) this is the first thing that comes up:
So, my question is:
How can I choose which items I want selected from the drop down boxes with my AppleScript?
(Specifically, option 7 in the "Format" drop down, and option 3 in the "Rate" drop down, then more complexly, choosing which folder I want in the "Primary Scratch Disk" drop down (which opens an "Open" dialogue) ).
Thanks in advance!

Ok, so I've worked out what the drop down boxes are called by digging through the package plist and strings files.
So now I have:
try
          do shell script "rm /Users/redhavoc/Library/Preferences/Final\\ Cut\\ Pro\\ User\\ Data/Final\\ Cut\\ Pro\\ 7.0\\ Prefs.fcset "
end try
delay 1
tell application "Final Cut Pro" to activate
tell application "System Events"
          tell process "Final Cut Pro"
activate
                    tell combo box "formats" of window "firstStart"
click button 1
                              repeat 6 times
keystroke (ASCII character 31)
                              end repeat
keystroke return
                    end tell
          end tell
end tell
But the error now returned is:
System Events got an error: Can’t get window "firstStart" of process "Final Cut Pro".
So I changed that line to:
tell combo box "formats" of front window
But now the error says:
System Events got an error: Can’t get window 1 of process "Final Cut Pro". Invalid index.
Hmmmm.... am I getting any closer??

I can't open a Final Cut Pro 6 file in Final Cut Pro 10. Please help!

I am a long time user of Final Cut Pro 6. I finished a video for a client but my computer was giving me issues because it's older and needs cleaned off so it is slow and it's affecting the video. I downloaded Final Cut Pro 10 trial on my laptop and tried opening the file in Final Cut Pro 10. No go. I thought that it would open because usually it isn't a problem when trying to open older files in newer programs. I understand, however, that Final Cut Pro 10 has been re-writted so it presents a problem. Can anyone please help me with this?
Thanks

Russ has answered your question.
What follows constitutes bully pulpitism.
Apple has a long history of abandoning legacy software and hardware. I would be VERY careful before I bought into the the next iteration of Apple software. The real conundrum is Adobe seems bent on extracting blood from stones with its new subscription model so it becomes a choice of lessor evils. Do you pick "the next great thing" (whatever that means) from a company that you know will cut you off at the kness or do you pick something that has a high degree of stability but will bleed you over the long run?
Not an easy choice.
x

Workflow from Final cut Pro

Hello there,
I have a three minute video sequence in Final Cut Pro and
want to post it on the web for streaming. My question now is:
should I export from FCP using my quicktime export to flash
file function or do I get better quality when I convert in the
Flash media encoder.
The follow on question then is: how do I know what setting to
use in FCP?
Or if I would go the other way: what format should my movie
be in to import into the Flash media encoder?
thank you so much.

it appears that if you check only "include crossfades"(during the fcp omf export) it does retain those once in logic, but if you check both "levels" and "crossfades", nothing gets retained. strange.

User of Final Cut Pro X wants sound editing

Similar Messages

Maybe you are looking for