User online hours bapi fm

Hi everybody,
I need to find a function module or BAPI that I can use to get the hours and days that users were online on the SAP system.
I already found the transaction sm21 were I can get this list but I need the bapi or fm that gives me the list.
Kind regards,
Wouter

I am on SAP 4.7 and i see it in SE37. You can search for SYSLOG* in se37 and it will give you a list of FM's. You can use the one that meets your requirements.

Similar Messages

  • User Exit or BAPI for Auto Backflush

    Hi,
    We have a requirement like-
    In backflush transaction (MFBF) for finish good we have many dependant materials that also need to be backflushed individually. To avoid this manual backflushing one by one we want to automate the process with the help of user exits available in SAP.
    Is there any User-Exits or BAPI by which we can acheive the above process automatically. Need some examples
    Thanks & Regards
    AK

    Hi,
    For MFBF there are sollowing user-exits....
    XMRM0001 - Backflushing in Repetitive Manufacturing.
    PTRM0001 - For lead column in REM planning Table.
    SAPLRMPU - Customer Exit for Article Staging.
    Reward points if useful....
    Regards
    AK

  • MIGO - User Exit / BADI / BAPI

    Hi All,
    I have an reuirement that when user save document in MIGO then I want to send an e-mail alert to concerned user for inspection of goods in store. Is there any user exit / BADI / BAPI where I can write my code to send mail in MIGO tcode.
    Thanx and Regards,
    Rajesh Vasudeva

    Hi,
    Try using BADI MB_MIGO_BADI or MB_MIGO_ITEM_BADI or WB2_ADDITIONAL_DATA or WB2_EXPENSE_ENHANCE or BADI_MATN1 or WVKU_DETERMINE_SP or ME_CIN_LEINRF2V or ME_CIN_LEINRF2R.
    KR Jaideep,

  • Developing custom IDOC , USER Exit , BADI , BAPI and RFC

    Hi,
    I want basic information on developing custom IDOC , USER exit , BADI ,BAPI and RFC.
    Thanks in advance

    Neha,
    >custom IDOC ,
    http://www.geocities.com/xplosion78/customised_ALE_IDOC_BY_SACHIN_DABHADE.zip
    >USER exit
    USER EXIT
    > BADI
    BADI Development Contents
    > BAPI and RFC
    Re: BAPI Development
    Cheers
    Agasthuri Doss

  • How to count user online?

    I develop some project by cfm and I have problem with module
    "count user online" I can count user online when user run by IE
    because I can know when user close browser but I can not do this on
    Fiefox. Please! help me!

    if you're using CFMX7, there's a nifty writeup on
    application.cfc in the current Fusion Authority mag that would give
    you a quick easy way to do it..
    http://www.fusionauthority.com/quarterly/
    Cheers

  • Missing inbox / sent items in users online archive

    Hi, I have quite an alarming problem with a users online archiving setup in exchange 2010 SP1.
    I have online archiving setup for a relatively small group of users. Its working fine for everyone except 1 - everyone has email moved to the archive after 2 years.
    The one user with the problem however has no inbox and no sent items on the archive mailbox. They have subfolders from the "root" with mail in them, but no inbox / sent items.
    Email are however being deleted from these folders after 2 years from the regular inbox!
    I have tried logging in through OWA (same) and other machines (same). I've tried using MFCMapi to check for the hidden properties on the archive mailbox (both false). I've tried using powershell to view statistics on the folders, and it appears to have 1
    item in the inbox on the archive at least.
    Can anyone help me?  Frankly I've ran out of ideas at this point.

    Hi,
    It is so strange that there is no Inbox and Sent Items folder in a user’s online archive mailbox. Please check whether there are no older than 2 years emails in Inbox and Sent items folders.
    Generally, within the archive mailbox, Exchange will automatically create the complete folder structure that was present in the user’s primary mailbox. The folder structure is not created within the archive mailbox until messages need to be moved into a
    given folder from the primary mailbox to the archive mailbox.
    I don’t know whether disable archive then enable it for this mailbox can recover Inbox and Sent Items folders or not. We can back up this archive mailbox firstly like exporting mailbox data to a PST file. Then try re-configure online archive
    for the mailbox to have a try.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Exchange 2010 user online archive mailbox becomes personal archive mailbox after recreated

    Hi,
    We are using Exchange 2010 SP2, one of our user online archive mailbox deleted and re-created fresh archive mailbox.
    But, then it displaying as Personal Archive Mailbox instead Online Archive Mailbox in server and user outlook. Also, no emails moving from primary mailbox to personal archive mailbox. Checked and confirm mailbox retention policy for the user mailbox, however
    there is no archive is running.
    How to resolve changing to Online Archive Mailbox and continue mailbox archive?
    Any help.
    MD

    Hi,
    How did the user delete and re-create the online archive mailbox?
    I suggest re-create online archive mailbox via following method:
    1. Befor creating Online Archive, please perform following configuration:
    Configure Exchange Online Archiving
    http://technet.microsoft.com/en-us/library/hh529915(v=exchg.141).aspx
    2. Then create Online Archive:
    Create a Personal (On-Premises) or Cloud-Based Archive for a New Mailbox
    http://technet.microsoft.com/en-us/library/dd979791(v=exchg.141).aspx
    Thanks

  • USER PEAK HOURS & NON PEAK HOURS

    Is there any way to analyze user peak hours using SAP? Are there any standard reports or T-Code for conducting such an analysis..
    Regards,
    Mohammed Ali Khan.

    Hi.
    Well i never said the answer didn't please me. I think we all are professionals over here and since it is a professional website we should treat it that way.
    I know both questions are similar in nature, but what can i say i have to listen my boss. He asked me to post this question so i did even though i informed him about the similarity of both questions, secondly i also provided him your suggestion that not to use this for calculating user productivity.
    I appreciate your effort for responding to my queries but what can i say "Have to listen to my Boss!!".
    I apologize if you feel offended or insulted by my posts or my queries.
    Take care and Regards,
    Mohammed Ali Khan.

  • Problem connecting with users online

    Each time I try connecting with LS chess users online, I keep getting a reply 'something went wrong, try again later'. Pls could you help me fix this?

    Hi, thanks for your answer.
    I changed the things, but now this problem appears.
    org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
    JCO.nativeInit(): Could not initialize dynamic link library librfc. Found version "620.0.941" but required at least version "620.0.1220".)
    What can i do with this mistake?

  • Comments on my AS3 flash chat component with emoticons, sound FX, multiple chat rooms and user online list

    Hello everyone,
    I have spend a good 1000 hours developing a solid Flash chat framework for everyone who always wanted to create a Flash Chat. This chat is coded in AS3 and works with PHP and XML. It's 100% customizable in terms of design, emoticons, sound effects, etc. and the special thing about it is the installation process. I tried to find a method that would save users from a tedious installation procedure. I managed to figure out a way using XML files to save the chat data. Using this method, the chat works simply after uploading to FTP, there is no configuration necessary, it works right out of the box.
    This is the first software I am ever attempting to sell online. Please comment on the chat and the website.
    http://www.flashchatdeluxe.com/
    Thanx,
    Sven

    hello sir,
    i want to your help
    i was installed fresh windows 7 via cd rom and then after installed all software.
    and now after 1 day customer complained me that cd rom not read any cd and i m also check when i insurt cd so its not read and when i am double click on cd rom icon its eject so what i do for that please reply on my email address.
    [text removed for privacy]
    VIMAL

  • What is difference between User Exits and BAPI

    hello sap gurus
    what is difference between User Exits and BAPIs

    http://www.sap-img.com/abap/what-is-user-exits.htm
    www.****************
    Where as this customer exits are again divided into:
    1. Menu Exits.
    2. Field Exits.
    3. Screen Exits.
    4. Function module exits.
    These all the things comes under Enhancements.
    User exits
    1.A user exit is a three character code that instructs the system to access a program during system processing.SXX: S is for standard exits that are delivered by SAP.
    XX represents the 2-digit exit number.UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
    2.USER EXITS are FORMS and are called by SAP standard programs
    using PERFORM.
    3.Inside the form (user exit) you can read and change almost
    any global data from host program.
    4. User exits are more flexible because you have more information to use in your code but on the other hand , it is very easy to manipulate erroneously global data and lead the standard program to a dump or even to make database inconsistent.
    5.While changing User-exit,Access Key is required,
    BAPI is nothing function module but which is remote enabled, means you can access this fm through other SAP or non-SAP system by assingning to business object,which we can crea in SWO1 transaction.
    more details see WWW.****************
    reward if helpful

  • ICal Invites to Outlook Users 5 Hours Off

    Hi,
    Have found a few posts on this, with even fewer answers. When I send iCal event invites to attendees who are on Win XP Outlook v 2003 sp2, the event is off by 5 hours. My 9 am appointments show up as 4 in the morning.
    Have tried resetting all time zone settings. Got some satisfaction setting time zone to floating (except now the invite is from 9 am - 9am). Have all Apple OS patches applied.
    Will trashing prefs fix this?? AND If I trash my iCal prefs will I loose all my appointments???
    I know this is likely a fight between Apple and slacker programmers at MS, but for the sake of the users, can't someone just make a fix??
    Oh yea, suggestions to fix are greatly appreciated.
    thanx,
    jeff

    Jeff,
    Oddly enough, I de-selected the option in the iCal preferences to Turn on Time Zone Support, and I was able to view events obtained from Outlook users in the correct timeframe. Not sure why this was the case, but any event sent to me as a calendar event from Outlook would always show up as GMT time zone, which is not where I'm located.
    This doesn't completely answer your question, as you were sending events out to Outlook users, but it might be worth trying?
    iMac G4 15" flatpanel 512k Combo   Mac OS X (10.1.x)  

  • Implement HR User Exits using BAPI's

    Hi,
    Please help me to implement User exits in HR Payroll (PBAS0001) using Bapis

    its BADI not BAPI.
    useful tcodes : Se18/19/80
    Regards
    Prabhu

  • Portal User Locked Hourly ..

    Hi,
    I have a very strange problem.
    Since a password change of the portal user "Administrator", this account is locked hourly.
    OS: W2k8
    DB: MSSQL 2k8
    SAP: Portal 7.00
    User: Administrator (UME)
    Portal IP: 192.168.1.1
    responses.trc
    [May 14, 2014 8:42:02 AM ] - 192.168.1.1 : POST /sld/cimom HTTP/1.1 401 1792
    [May 14, 2014 8:42:02 AM ] - 192.168.1.1 : POST /sld/cimom HTTP/1.1 401 1792
    [May 14, 2014 8:42:03 AM ] - 192.168.1.1 : POST /sld/cimom HTTP/1.1 401 1792
    [May 14, 2014 8:42:03 AM ] - 192.168.1.1 : POST /sld/cimom HTTP/1.1 401 1792
    [May 14, 2014 9:42:01 AM ] - 192.168.1.1 : POST /sld/cimom HTTP/1.1 401 1792
    [May 14, 2014 9:42:01 AM ] - 192.168.1.1 : POST /sld/cimom HTTP/1.1 401 1792
    [May 14, 2014 9:42:01 AM ] - 192.168.1.1 : POST /sld/cimom HTTP/1.1 401 1792
    [May 14, 2014 9:42:01 AM ] - 192.168.1.1 : POST /sld/cimom HTTP/1.1 401 1792
    security.log
    #1.5 #00155D11160300650000014F00000F000004F95827B00C09#1400056919503#/System/Security/Audit##com.sap.security.core.util.SecurityAudit#Guest#0#SAP J2EE Engine JTA Transaction : [045ffffffe5ffffff8e00ffffffcefffffffa]#n/a##9d0725f0db4311e3c01800155d111603#SAPEngine_Application_Thread[impl:3]_0##0#0#Warning#1#com.sap.security.core.util.SecurityAudit#Plain###Guest    | USERACCOUNT.MODIFY    | UACC.PRIVATE_DATASOURCE.un:Administrator    |     | SET_ATTRIBUTE: lastfailedlogon=[{0001400053321593} -> {0001400056919450}], SET_ATTRIBUTE: PRINCIPAL_MODIFY_DATE=[{0001400053367448} -> {0001400056919483}], SET_ATTRIBUTE: failedlogonattempts=[{0} -> {1}], SET_ATTRIBUTE: LAST_MODIFIED_BY=[{} -> {Guest}]#
    #1.5 #00155D11160300650000015000000F000004F95827B03D0C#1400056919521#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#Guest#0##n/a##9d0725f0db4311e3c01800155d111603#SAPEngine_Application_Thread[impl:3]_0##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.FAILED
    User: N/A
    Authentication Stack: sap.com/com.sap.lcr*sld
    Login Module                                                                                                         Flag        Initialize  Login      Commit     Abort      Details
    1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT  ok          false                 true      
    2. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          exception             true       Authentication did not succeed.
    3. com.sap.security.core.server.jaas.CreateTicketLoginModule               OPTIONAL    ok                                true       #
    #1.5 #00155D111603006F0000014100000F000004F95827B072ED#1400056919624#/System/Security/Audit##com.sap.security.core.util.SecurityAudit#Guest#0#SAP J2EE Engine JTA Transaction : [045ffffffe5ffffff8e00ffffffcf0]#n/a##9d199c80db4311e38ead00155d111603#SAPEngine_Application_Thread[impl:3]_4##0#0#Warning#1#com.sap.security.core.util.SecurityAudit#Plain###Guest    | USERACCOUNT.MODIFY    | UACC.PRIVATE_DATASOURCE.un:Administrator    |     | SET_ATTRIBUTE: LAST_MODIFIED_BY=[{} -> {Guest}], SET_ATTRIBUTE: PRINCIPAL_MODIFY_DATE=[{0001400056919483} -> {0001400056919606}], SET_ATTRIBUTE: lastfailedlogon=[{0001400056919450} -> {0001400056919576}], SET_ATTRIBUTE: failedlogonattempts=[{1} -> {2}]#
    #1.5 #00155D111603006F0000014200000F000004F95827B0B823#1400056919654#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#Guest#0##n/a##9d199c80db4311e38ead00155d111603#SAPEngine_Application_Thread[impl:3]_4##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.FAILED
    User: N/A
    Authentication Stack: sap.com/com.sap.lcr*sld
    Login Module                                                               Flag        Initialize  Login      Commit     Abort      Details
    1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT  ok          false                 true      
    2. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          exception             true       Authentication did not succeed.
    3. com.sap.security.core.server.jaas.CreateTicketLoginModule               OPTIONAL    ok                                true       #
    #1.5 #00155D111603006A0000019C00000F000004F95827B45A12#1400056920281#/System/Security/Audit##com.sap.security.core.util.SecurityAudit#Guest#0#SAP J2EE Engine JTA Transaction : [045ffffffe5ffffff8e00ffffffcf7]#n/a##9d7ddc90db4311e3b8e200155d111603#SAPEngine_Application_Thread[impl:3]_19##0#0#Warning#1#com.sap.security.core.util.SecurityAudit#Plain###Guest    | USERACCOUNT.MODIFY    | UACC.PRIVATE_DATASOURCE.un:Administrator    |     | SET_ATTRIBUTE: PRINCIPAL_MODIFY_DATE=[{0001400056919606} -> {0001400056920260}], SET_ATTRIBUTE: failedlogonattempts=[{2} -> {3}], SET_ATTRIBUTE: LAST_MODIFIED_BY=[{} -> {Guest}], SET_ATTRIBUTE: lastfailedlogon=[{0001400056919576} -> {0001400056920224}]#
    #1.5 #00155D111603006A0000019D00000F000004F95827B463A9#1400056920295#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#Guest#0##n/a##9d7ddc90db4311e3b8e200155d111603#SAPEngine_Application_Thread[impl:3]_19##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.FAILED
    User: N/A
    Authentication Stack: sap.com/com.sap.lcr*sld
    Login Module                                                               Flag        Initialize  Login      Commit     Abort      Details
    1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT  ok          false                 true      
    2. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          exception             true       Authentication did not succeed.
    3. com.sap.security.core.server.jaas.CreateTicketLoginModule               OPTIONAL    ok                                true       #
    #1.5 #00155D111603005E000000FF00000F000004F95827B4A30A#1400056920413#/System/Security/Audit##com.sap.security.core.util.SecurityAudit#Guest#0#SAP J2EE Engine JTA Transaction : [045ffffffe5ffffff8e00ffffffcfd]#n/a##9d9200d0db4311e3a8cf00155d111603#SAPEngine_Application_Thread[impl:3]_24##0#0#Warning#1#com.sap.security.core.util.SecurityAudit#Plain###Guest    | USERACCOUNT.MODIFY    | UACC.PRIVATE_DATASOURCE.un:Administrator    |     | SET_ATTRIBUTE: lastfailedlogon=[{0001400056920224} -> {0001400056920362}], SET_ATTRIBUTE: LAST_MODIFIED_BY=[{} -> {Guest}], SET_ATTRIBUTE: failedlogonattempts=[{3} -> {4}], SET_ATTRIBUTE: PRINCIPAL_MODIFY_DATE=[{0001400056920260} -> {0001400056920395}]#
    #1.5 #00155D111603005E0000010000000F000004F95827B4AB21#1400056920424#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#Guest#0##n/a##9d9200d0db4311e3a8cf00155d111603#SAPEngine_Application_Thread[impl:3]_24##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.FAILED
    User: N/A
    Authentication Stack: sap.com/com.sap.lcr*sld
    Login Module                                                               Flag        Initialize  Login      Commit     Abort      Details
    1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT  ok          false                 true      
    2. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          exception             true       Authentication did not succeed.
    3. com.sap.security.core.server.jaas.CreateTicketLoginModule               OPTIONAL    ok                                true       #
    Normaly that means that the CIM Client is not correctly configured, but the SLD runs over the SolMan (7.1) and in the VisualAdmin > Server > Services > SLD Data Supplier
    HTTP Settings and CIM Client Settings are set to the SolMan host and uses the SLDDSUSER to sync the data with the SLD.
    Does anyone have an idea what process will connect hourly to the portal where the Administrator is set as user?
    I've been searching and reading the now for over two days on the SCN and the web, but I didn't figured it out.
    It looks like the portal itselfs want to connect to the local /sld/cimom but the SLD of the portal is still stopped, and also if its running, I get the same error every hour.
    Thanks for any advise!
    Tobias

    Hi Tobias,
    Please do the following once, if possible.
    1. Please change the password of administrator user and save the password in secure store and recycle the system.
    2. You may create a user with equivalent access/permission like administrator temporarily, until this problem is resolved, so that you can unlock the administrator logging in with that id.
    3. Please check if that administrator is being used in any connection from java stack, where the password is still old.
    4. Attach the default trace here at the time when the user is getting locked. We want to check further.
    5. You can follow what David advised in the SAP note, if you can identify the real cause, otherwise follow the above steps.
    Thanks.
    Regards,
    Sujit Kumar Banerjee.

  • How can provider-hosted app accessible to anonymous users online

    Hi,
    I am new SharePoint and still learning it.
    I have created a Provider Hosted App. built in asp.net Web application. This apps retrieve all file to shared documents of sharepoint online using REST API. it's access only register user.
    The problem is that how can accessed this apps  through anonymous user.
    I am not sure what is the best way to do this.
    Thanks
    Krishna

    Hi Krishna,
    check those URLs
    http://www.sharepoint-journey.com/how-to-enable-anonymous-access-in-sharepoint-2013.html
    https://support.cloudshare.com/hc/en-us/articles/200701115-How-to-Enable-Anonymous-Access-to-a-SharePoint-2013-site
    Also to create the App to allow anonymous check the following link
    http://msdn.microsoft.com/en-us/library/office/dn579415(v=office.15).aspx
    Kind Regards,
    John Naguib
    Technical Consultant/Architect
    MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
    Please remember to mark your question as answered if this solves your problem

Maybe you are looking for