User Parameter ID 'blank'

Hi experts
I wish to know if there is a value to set a parameter ID "blank" (or to delete the values for the fields who SAP ECC memorize after a registration).
My problem is: I have to register movements with the VLMOVE transaction and ECC memorize and propose the plant and the storage location than I have used for other transaction (or toghether with the VLMOVE); but for some movement type those fields are not changeable (grey fields with the value pre-selected).
So, I was thinking than a way to obviate it is to set a parameter ID as "blank", so the user have to enter every time the values, and if a field is "grey" the content is wide.
If you have other suggestion...
Thanks in advance
Kind Regards,
Alessandro

Hi ILpesca ,
Check below options.
Navigate to System -> User Profile -> Own Data -> 'Parameters' tab
In field Parameter ID enter WRK and leave Parameter value as blank.
In next line, in field Parameter ID enter LAG and leave Parameter value as blank.
Save.
Execute your transaction, and see Plant & Storage Location will be blank always.
Note: This setting is user dependent. Will work only for current user.
If you want to clear entire history follow below steps,
Navigate -> SAP Easy Access (Initial screen) -> Press Alt + F12 -> Options -> Local Data -> Click Clear History -> Click OK
Entire history will be cleared.
Thanks.

Similar Messages

SSRS report parameter left blank to select all

Hello,
Before posting this question I have looked at related topics and couldn't find a clear answer!
Question: Is there a workaround for a parameter to select all if blank?
I have a report that has a multivalue parameter, my user is asking if there is a way to have an empty parameter box that will default to selet all, so if the user does not fill parameter and clicks on view report it should work.
I have tried:
SELECT Item FROM ItemTable
UNION ALL
SELECT '' AS Expr1 ORDER
BY Item
Then checked Allow Blank Value ''
and checked Allow Null Values
and did the change in my query. The problem here is that the parameter will have null check box which the user does not want see?
Thanks

Hi There
Thanks for yourposting. I think you do not need to click on checkbox allow null value, just check allow blank value and change in your dataset query like this.
Please change the query but the synxtax might look like this
if @commenttype=''
select * from Comment_Type
else
select * from Comment_Type
where
Comment_Type=@commenttype
if @commenttype=''
select * from Comment_Type
else
select * from Comment_Type
where
Comment_Type=@commenttype
By default your parameter is blank and you display all records, but when user type something it will filter the datset based on the user input
I am putting some screenshot for your help.
If you have any questions pelase let me know
Many Thanks
Syed Qazafi Anjum
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.

Unable to prepare project for publishing. Error in user parameter list

After editing the project in iMovie '09 I am getting strange problems.
1) If I try to share the project to iDVD I get the Error Message: "Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)". The same error message I get when trying to "Export Movie".
2) If I play the movie (either in the preview window or in full screen), I hear the audio, but the video remains on the picture, I was, when I start playing. This wasn't the case until yesterday. I don't know, what has changed this.
I am not sure, if both problems are connected.
If I try to play a clip, everything still works well, means audio and video are playing as expected.
Any ideas, what I could try to solve this (I already tried to restart iMovie, checked that I have the newest version 8.0.1 (740) and tried to restart my iMac?
Leela

I'm having the same problem, though it wasn't triggered by me importing anything. I had an almost complete project that I was just editing down and tightening up. I was making some deletions and moving some clips around when the project just went all wonky. If I hit the space bar the video will play. Audio, video and titles are all as they should be. But the editing window is frozen. The raw clips have disappeared from the upper left. When I restart the app the editing window is sometimes blank. But if I drag another application across the screen (like Mail or iTunes) the clips regenerate in the viewer window. This is a HUGE disappointment for me. After wasting an hour trying to solve this I now have to start completely from scratch with this project.

Report with user parameter is not runnig

Hi
I have created the report with user parameter p_deptno and qyery"select * from emp where depno=:p_deptno";
when i run the report in paper layout a popup kind page will open and ask us to enter the deptno and based on input parameter it fetches record in report.
if i tried the same thing with url :http://localhost:portno/reports/rwservlet?destype=cache&desformat=pdf&report=emp.jsp&userid=scott/tiger@orcl
the parameter window not opening and and blank report will open with coloumn headings.
help me to solve the problem.
i am using devsuite oracle10g release 2 on linux(OEL4).

Hello,
You have to provide the parameter in the URL :
For example :
http://localhost:portno/reports/rwservlet?destype=cache&desformat=pdf&report=emp.jsp&userid=scott/tiger@orcl&p_deptno=10
or use the Web parameter Form :
http://localhost:portno/reports/rwservlet?destype=cache&desformat=pdf&report=emp.jsp&userid=scott/tiger@orcl&paramform=true
Regards

Export Parameter is blank....Business Connector

Hi,
I am using Business Connector to create a sales order thru web..
For this i have created an RFC which internally calls a BAPI that creates sales order...in the BAPI some user Exits will get called in them i am exporting some message to MEMORY ID & importing after retuning to the RFC and assigened it to one of the export parameters of RFC ...Everything is wrking fine when I am testing the RFC on R/3..but thru BC the Export parameter is blank..
I have tried set/get parameters & atlast ztable also...nothing is wrking..
what might be the problem?How to capture that msg & display thru web?
(Note : when dat export parameter is hardcoded in RFC that is getting displayed thru BC)
Thanks in advance
Swathi Vuddala

Hi,
Have look at this,
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
Regards,
Akshay.
reward points if find useful.

When sharing iMovie11 project with iDVD inmediately message 'the project could not be prepared for publishing because an error occurred (Error in user parameter list). Finalize issue?

When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
Option File - Finalize Project gives inmediately the same errormessage.
Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
Please advise, thank you!

Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80

Need to display a value before the header based on a user parameter.

I have a select on the user parameter list of values.
SELECT DISTINCT GROUP_ROWID, STR_GROUP_NAME
FROM TBL_COMPANY_GROUP;
I select the option hide the first column in order to show only a list of values and not the row_ids.
I need to display the str_group_name within the header as a title. I insert a field in the header and in source select the name of the parameter p_groupid but the only thing that I get is the row_id value not the name. I use the row_id to pass it on my queries but I need the name value in the header. Any ideas? Please help.
Thanks.

create a parameter called p_header.
in the after parameter form trigger
select str_group_name into :p_header
from tbl_company_group
where group_id = :p_groupid;Have the header field source be p_header.

Placeholder or User Parameter receiving directly from a field.

I can place as well placeholder as much as user parameter inputs in my report. My issue is when query returns no rows, but I need to show in this case user input datas, and my variable(placeholder or user parameter) is just syncronized with user inputs. But I wanna to change value when no rows returned it shows user inputs, and when there are rows, show a field at query.
Assumed i.g:
SELECT NM_NAME FROM MY_TABLE WHERE NM_NAME = :NAME
I have one placeholder inside report margin that represents NAME.
When that query has rows, show QUERY FIELD, so... NM_NAME, when no rows returned, so show :NAME.
I´m not getting point how can I syncronize this with my issue, to contour this, I can create one extra query (same as mine main query) that return the value when there is rows to return.
What is the best maner to fix it?
I hope that my explanation was plain.
Regards!

I should use functions from the SRW package in a format trigger:
1. Create a field in the margin (layout).
2. Give it a source . eg. 'mode' or ' desformat' (just any of the system parameters)
3. Create a format trigger on this field with code (eg.):
function F_1FormatTrigger return boolean is
begin
if :P_parameter = 'Yes' then
srw.set_field_char(0,:Name);
else
srw.set_field_char(0,'other text');
end if;
return (TRUE);
end;
Hope this helps,
regards, Bart

Pass parameter value to another parameter.... User query in user parameter

Hello everyone, any help would be greatly appreciated.
Problem:
My report currently has 5 user parameters (3 Number, 2 Characters). I have an after parameter trigger that evaluates all the parameters to see which one has any value and then creates the “where clause”. Below is an example of two of the 5 parameters.
The function works fine, I just cut out all the other stuff for this issue.
function AfterPForm return boolean is
IF :P_JOB_ID is not null then
:P_WHERE_CLAUSE := 'where Job_num = :P_JOB_ID';
ELSIF :P_QUES_DESC is not null then
:P_WHERE_CLAUSE := 'where DESCRIPTION like :P_QUES_DESC’;
ELSE :P_WHERE_CLAUSE := ‘where JOB_NUM = 0';
The “P_WHERE_CLAUSE” is used as follows in a query.
Select job_num
from PROMOTION
&P_W_CLAUSE
Issue:
The query result can be anywhere from 1 to 50 job_num’s. I need to show the end user running this report the values (job_num) in a drop down list. They in turn will select one job_num which will be used to run the report. I tried putting the Select job_num from PROMOTION &P_W_CLAUSE in a User Parameter but that does not work. I get an error. I feel that I am approaching this the wrong way. Because in the end I would end up with two queries, one for the Select statement containing the P_W_CLAUSE and another with the final report. This issue is sort of like cascading prompt where the values from one (or more) parameters are used in the select of another user parameter which in turn the value selected will be used in the final report. Also this report will be used somewhere between 50 - 75 times per day so storing the values in a temp table might not work.

Sorry,
as I know depending parameters like you want are not possible in Reports. You can use one reports as parameter-report-only to use a second as your original report, but this is not perfect. Or use a tool like Application Express (which is able to have depending fields) in front of reports to build your parameter forms.
Regards
Rainer

Using user parameter for

Hello,
I have created a report using an xml pds. I am using a servlet for the xml data stream source. Everything works great with the url to the servlet hard-coded between the <xml></xml> tags (ex. <xml>http://10.3.35.119:9004/ssapp/servlet/ScheduleDataServlet</xml>) but when I try using a user parameter between the tags (so I will be able to dynamically change the url to this servlet) it bombs. Please see my source code and error message below. Any help would be greatly appreciated, I've been stuck on this for days! Thanks!
<rw:report id="recoveryCenterScheduleReport" parameters="server=myreportserver&userid=ssstage/ssstage@DEVL&p_xmlDataURL=http://10.3.35.119:9004/ssapp/servlet/ScheduleDataServlet">
<rw:objects id="objects">
<?xml version="1.0" encoding="WINDOWS-1252" ?>
<report name="XMLscheduleReport" DTDVersion="9.0.2.0.0">
<xmlSettings xmlTag="XMLSCHEDULEREPORT" xmlPrologType="text">
<![CDATA[<?xml version="1.0" encoding="&Encoding"?>]]>
</xmlSettings>
<data>
<userParameter name="XML_HTTPS" datatype="character"
pluginClass="oracle.reports.plugin.datasource.xmlpds.XMLDataSourceFactory"
width="255" defaultWidth="0" defaultHeight="0" display="no"/>
<userParameter name="p_xmlDataURL" datatype="character" width="100"
precision="10" defaultWidth="0" defaultHeight="0"/>
<dataSource name="QP_1">
<plugin
factoryClass="oracle.reports.plugin.datasource.xmlpds.XMLDataSourceFactory"
majorVersionNumber="1" minorVersionNumber="2"
signOnParameter="XML_HTTPS">
<![CDATA[<xmlpds DTDVersion=" 1.0">
<dtd>null</dtd>
<schema>file:///C:/Practic Workspace/Practice/WEB-INF/xsd/scheduleReport.xsd</schema>
<XSQLschema>null</XSQLschema>
<XSQLWithDTD>false</XSQLWithDTD>
<type>false</type>
<xmlWritten>true</xmlWritten>
<validate>true</validate>
<xml>&<[b]p_xmlDataURL></xml>
<xsl>null</xsl>
javax.servlet.jsp.JspException: rwlib-1: REP-0002: Unable to retrieve a string from the report builder message file.
REP-0069: Internal error
XMLPDS-63004:Generic error while parsing the URL stream name instead of <.
REP-4111: Fail to create pluggable data source 'QP_1'
at oracle.reports.jsp.ObjectsTag.doEndTag(ObjectsTag.java:180)
at jsp.reports._schedule._XMLscheduleReport._jspService(_XMLscheduleReport.java:87)
....

Never mind, I discovered the problem. I wasn't using the necessary xml escape characters for the user parameter embedded in the xml.

How to include input user parameter values in XML report output?

How can i include input user parameter values in XML report output. I a have a report which can be run by providing start date and end date. I would like to include value of these parameters in XML output to enable me to figure out dates for report, just by looking at XML output.
Rgds,
manish

I think all the XML attributes can contain lexicals. If you bring up the property palette against the report object you can just set the following:
XML Tag Attributes: myParameter="&<P_1>"
where P_1 is your user parameter.

Im trying to share a project to idvd and gettingThe project could not be prepared for publishing because an error occurred. (Error in user parameter list) what does this mean

I've been trying to burn my projects in imovie to dvd's and i keep getting the forllowing error message "UNABLE TO PRPARE PROJECT FOR PUBLISHING"
"The Project could not be prepared for publishing because an error occured (Error in user parameter list)
Does anyone know why this is happening and what I can do to fix it?
Thanks!!

Can you give more details? What exactly is the entire error message text? there should be an error number too. Are you trying to finalize this to an external disk?

I keep getting this message from Imovie: Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)

I keep getting this message from Imovie:
Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)

Bartirn,
I called Apple under my Mac support contract. They were completely unfamiliar with the error you and I were encountering. Updating to 10.8.5 didn't help.
I'm stopping my TimeCapsule while I perform these tasks, but I don't know yet if I have a consistent work-around.
B

HT2479 Ok so imovie 11 won't let me export my movie anywhere, no matter what it seems. all it says is he project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list).

Any help would help.

Hi
Error -50 paramErr - Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ?
Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
Corrupted preference file: The "com.apple.iMovie.plist" file - trash it
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
• Mac OS - most probably X.7 or more
• iMovie version - more than iM'11 v. 9.0.4
Action taken
• Finalizing project - I never do as I never understood the gain to do so
• Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set
• I only use PAL (25fps
Yours Bengt W

What is (ParamErr: error in user parameter list)

I get the following error message when I try to send my imovie '11 project to iDvd:
Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)
Anybody know why?

There may be more than one cause for this error, but in most cases the project to be published includes short clips of less than about 1.5 seconds duration.
Duplicate the project. From the duplicate, delete the short clips and try to publish. If that doesn't solve the problem, see the post by Didorx in this thread.

User Parameter ID 'blank'

Similar Messages

Maybe you are looking for