User Parameters in SU01

Hi PM Gurus,
can somebody suggest me how to do a mass update of user parameters for selected set of users. I want to add 3 new user parameters.
Cheers
Deepal

Hi Manfred
Thanks for the reply. But I already looked at this option and it cannot be used for parameter maintenance.
Cheers
Deepal

Similar Messages

Documentation on user parameters set in SU3 or SU01?

Hello all. I am trying to find documentation on the available user parameters set in SU3 for self-service or in SU01 by an admin.
I frequently have users with issues with various reports, exports, etc. When all else fails, I remove all of their user parameters, the issue is resolved, and I add them back one by one until I find the offending incorrect parameter.
Some of the parameters are self explanatory -- like Company Code, Currency, etc.
But other, like GWRE for Report Writer, is just a series of X's. Like -- X XXX XEX....
I can't figure out how to tell what most of them mean.
Thanks so much.

Amit Barnawal wrote:
Hello Michael,
> Parameters are exactly not needed, it is present there just for user's benefit, as suppose user needs to access particular company code always,and he dont need to put that everytime,so he can put that in parameters and it will automatically get filled.
> Also look at below mentioned link
> http://www.sap-img.com/basis/parameters-definition-and-details.htm
Hi Amit,
That is not strictly true (and the link contains incorrect information).
Some parameters have historically been used to provide authorisation. One of the most commonly used ones is EFB which is used to allow creation of a PO without reference to a PR. That is only one example, there are lots in HR.

User mangement - Set default user parameters

Hello Experts ,
Does anybody know where we can set the default fields for the users , so when one is created over SU01, for example the telephone number and one parameter, is already set ?
I searched as well for a program that can mass update user parameters but i didnt found anything i think the solution here is through a custom transaction .
The user management is on Solution Management.
I would be glad if someone could help me out ,
Best regards,
David

Hi david,
can you check below links
http://www.sap-img.com/abap/mass-update-the-user-parameter-value.htm
http://www.saptechies.com/forum/viewtopic.php?t=6023&sid=a399d43c4f9bfaa655b0e008c312159e
regards,
Srinivas

How to set user parameters in transaction MD61 through a report?

Hi,
I want to set default values for 'Requirement Type' in user parameters of transaction MD61 through a report. Please help.
Thanks in Advance.

Create Variant using SHD0 and with Group and assign to particular user's
Here is the steps
Creating a Variant Group
1. Open transaction SHD0, enter the transaction code, and press enter.
2. Choose the Standard Variants tab page, and then the sub tab page Variant Groups, and enter a group name, such as GROUP_GEN
3. Choose Create. Enter a short text on the Maintain Variant Group window that appears and save the variant group.
Assigning Users
Once you have created the variant group and the relevant transaction variants with screen variants, you now need to assign users to the variant group as follows
1. Return to the Standard Variants tab page, Variant Groups sub tab page.
2. Enter the name of a user that you want to assign to this variant group, and choose Assign. A message that this user was successfully assigned to the variant group appears in the status bar. If you choose a where-used list for users, this user is displayed in the user list.
3. However, for the screen variants of the variant group that you created above to be displayed for the user, you first need to select Set Proposal. The user is assigned to the group and the associated transactions are started with the corresponding variants only once you choose the Set Proposal function.
You can use this procedure of user assignment for all other users that you want to add to the variant group
Hope this helps.
Thanks
S.N

Getting problem with running RWBLD60 with User parameters

Hi All,
I am trying to run a report using rwbld60 from command prompt which has input parameters
I tried like this but it didnt work out
rwbld60 module=reportname.rdf userid=scott/tiger@orcl destype=file desformat=pdf
desname=report_out.pdf parameterform=NO params=parms_1 traceopts=trace_prf tracemode=trace_replace
tracefile=trace.txt
Can any one please tell me how i can pass user parameters for rwbld60
Thanks,
Amar

actually, i do my FYP on bluetooth chatting...
and there will be more than two emulators running at the same time..
one of my frens said that if u want to run more than one emulator u just simply click on run button..
and it will appear on the screen..

Passing User Parameters through Run_Report_Object

hi,
How to pass multiple user parameters through run_report_object.example i have to pass 20 parameters, have i write 20 statements? is there any way to come in single statement.i am using Forms 6i.
thks in advance,

A parameter list can be the second parameter of RUN_REPORT_OBJECT,
rjob := RUN_REPORT_OBJECT(rep_id,paramlist_id);
Gerald Krieger

On Lexical variables: Are they always treated as user parameters???

Hi
Report Developer 10g, Winodws XP platform, local client
I have a dynamic where clause in my report query with a lexical variable &p_where which holds the where clause. This where clause is determined at runtime, depending on the user parameter value that was entered.
My problem is, the lexical variable &p_where is automatically added to the list of my user parameters and does show up in my parameter form, when the report is run. This will cause lot of confusion to the user, as it is not part of user input.
It is not a user parameter, but should be treated as a regular variable. How do I work around this?
Thanks
Suma

I understand. The lexical variable was automatically added to the user parameters list upon it having appeared in a query.
This is expected. The lexical variable must be defined. Since it is not a system parameter, Oracle*Reports added it to the user parameter list.
But if it is also showing up on your user parameter FORM (the form which solicits input from the user prior to running the report), it can simply be deleted from that form without affecting its use in the query.
Regards,
Steve

CUA and user parameters

I thought CUA updated all user characteristics, but I just noticed that User Parameters are not updating on my system. Is this configurable? Is it supposed to work this way? Does anyone know of documentation that explains this. Thank you.

Hi Leo,
Generally User Parameters are set to PROPOSAL (recommended by SAP) which means the users should be able to mainatin their parameters in different systems individually.
PFB the document stating the same in SAP HELP.
http://help.sap.com/saphelp_nw04s/helpdata/en/6a/b1b13bb3acd607e10000000a11402f/content.htm
Award points for helpful answers.
Rgds,
Sri

Calling report using Mapping File with user parameters

Please provide an example of Key mapping file that provides user parameters to an Oracle Reports report, where paramform=no.
I call an Oracle Reports report via APEX, and can't get the URL to work. If I don't use the mapping file, the call works. But I can't seem to get it to work using the mapping file to hide all the other params like userid etc.

Please provide an example of Key mapping file that provides user parameters to an Oracle Reports report, where paramform=no.
I call an Oracle Reports report via APEX, and can't get the URL to work. If I don't use the mapping file, the call works. But I can't seem to get it to work using the mapping file to hide all the other params like userid etc.

Error message in creating EBP users from existing SU01 users

I am getting the following error messages when i try to create EBP users from existing SU01 users using users_gen: Error during creation of user: User not created or error(s) occurred during user creation. ``Central person`` already exists for user (BBPU_MESSAGES 042). Pls what does it mean and how do i solve this?

Babalola-
The message is indicating that the user you are attempting to create was previously created in the EBP system.
First I would try to correct the user via users_gen using the "check users" option. This may repair the user, but if the user has lost the association to the org then you will need to take some manual steps to re-establish the links for the user in the org details.
If this doesn't correct it, then use transaction PP01 to correct/verify the following relationships for the user. Start with the org unit and work your way down looking for the broken link/s.
Here are the required relationships for the objects:
ORG UNIT:
Relationship     Object
B 003          Position(of user)
POSITION:
Relationship     Object
A 003          Org Unit
A 008          Central Person (of user)
A 008          User
CENTRAL PERSON:
Relationship     Object
B 008          Position
B 207          Business Partner
B 208          User
USER:
NONE
BUSINESS PARTNER:
NONE
Hope this helps you.
b

Pass User Parameters between Forms and Reports...?

Hi,
I have been trying to pass user parameters from forms to reports using
RUN_REPORT_OBJECT. I am able to run the report from the form, but still don't know how to pass user_parameters. Does anyone know how to do this?
Thanks,
AB

You can use SET_REPORT_OBJECT_PROPERTY with the "REPORT_OTHER" parameter
The following example passes 3 parameters to the report:
SET_REPORT_OBJECT_PROPERTY(pt_report_object_id, REPORT_OTHER, 'paramform=no p_param_1='||pc_param_1||' p_param_2='||pc_param_2);

User Parameters Table

Hi All,
I want to know the tables where the User Parameters are stored. By User parameter, i mean the The User Profile - Parameter ID & Value.
Any pointers would be helpful.
Thanks in advance,
Best regards,
Prashant

hi
good
USR01 User master record (runtime data)
USR02 Logon data
USR03 User address data
USR05 User Master Parameter ID
USR12 User master authorization values
thanks
mrutyun

Delivering site in VA01 based on user parameters

Hi,
My requirement is to set the field 'Delivering Site' from transaction VA01 (Program Name: SAPMV45A ; Screen Number: 4440; Screen-field: RV45A-DWERK) defaulted by the user parameters.
The problem is that this field in standard VA01 doesn't have the Parameter ID = WRK. Is there any way I can 'force' this field RV45A-DWERK to use the parameter from the user-parameters?
Thanks in advance,
Best regards

Hi,
Not sure about how to force a parameter id !
However, you can check user exit MV45AFZB -> FORM USEREXIT_SOURCE_DETERMINATION
where the delivering plant that need to be set according to user parameters can be done by coding your logic.
This field is normally defaulted from the customer master -> sales area data.
Regards,
Amit

What are user parameters? and how can i add user parameter

Hi Experts,
what are user parameters? and how can i add user parameter and how can i add a user parameter
HR_DISP_INFTY_NUM with value X?

user parameters are used give reference grps and counntry grouping use SU3 tcode as amite said

Referencing runtime values of user parameters

Hi folks,
i have a report that displays data for a period between 2 date values that are specified at runtime via 2 date user parameters created in the report.
i want to reference the runtime values of the 2 user parameters in boilerplate text as follows
Between <date_param1> And <date_param2>
Since they are not fields, i cannot reference them in boilerplate text as described in the help notes.
Can anyone help out.
thanks in advance.

In addition to fields, you can also reference column or parameter values directly from within boilerplate. So you should be able to do: "&<date_param1> And &<date_param2>"
Alternatively, create a field - "F_1", mark it as hidden and set its source to "date_param1". You can then reference the field as defined within the help notes.

User Parameters in SU01

Similar Messages

Maybe you are looking for