User Point of View
Hi ,
Can we give a Descriptive lable for a User point of View ?
Suppose the name of dimesnion is Version which i have set it as user point of view . Then can i give lable / name to the same someting like " Enter Version ..." like we do for prompts.
Thanks & Regards
Vijaya
Hi Vijaya,
As far as I know, it is not possible. But if hyperion does do some change in their work space code, then it might be possible.
It is not possible from your side.
Regards,
rahukl
Similar Messages
-
Hi ,
I have set a filter Custom ( Just two values) for Version which is set as user point of view .
I can see only two values in the FR studio for that report .
But i have following issues.
1) When other users/developers login with there credentials the custom filter is not getting applied . That is the other developer can see all the values.
2) When i run the report in workspace the custom filter does not get set . It shows all the values even though in the design the Custom filter is set.
please let me know how i can resolve the above issue and is critical for me .
Thanks and Regards
VijayaI know what you are referring to. What you did was create a filter only for your user id and not for the report. That option in the FR Studio is very misleading, it makes it appear as if the report was limited to those 2 members. It is only for the user id of the person developing the report when you preview the report.
What you can do is put Version in the Grid POV. There you can limit the members users will see when they run the report. Unfortunately, it's not very pretty and a bit confusing for users. -
Preview User Point of View in workspace
Hi All,
Hope you are all doing great.
the Financial Report Preview user point of view in the workspace split into two where the buttons window displaying in large
How to make the User point of view preview like this below?
Regards,
VTHi VT,
Not always true… part of the configuration is to add the url in the trusted sites. If one url is in the trusted site and the other is not then it may be the issue.
Cheers,
Thanos -
Responce times from end-user point of view
Hi,
I am looking for the way how to collect responce times from end-user point of view.
Logging of function execution via DMS is not enogh thus we need to discover and monitor problems in all components including poor network, users terminals etc.
Regards,
TomaszHi,
I am looking for the way how to collect responce times from end-user point of view.
Logging of function execution via DMS is not enogh thus we need to discover and monitor problems in all components including poor network, users terminals etc.
Regards,
Tomasz -
Reports User Point of View Question
I created a report that has two grids and the databases are both essbase cubes and have the same dimension names. I am working with Hyperion Reports 9.3. I wanted to link the User Point of View, so that all the user had to do was click on:
1. Period (ie-Apr)
2. Company Code
3. FiscalYear (ie-FY10)
What the Preview User Point of View shows is a drop-down box at the top that has the user select each database connection and change the POV for these dimensions. I'd like to not do that. I'd like the User POV to only have to be selected once.
Note: At a previous job, I am pretty sure I was able to do this without having to change the User POV for each db connection. I know there were two connections but didn't have to change the POV twice. I will provide additional details if needed.
Thanks, TI'm not sure if that will work for me. I already have the 2nd grid hidden from view and there isn't an option to "pull" the POV from another grid that I can see. I even tried merge equivalent prompts in the User Preferences in Workspace but I think that is for prompts only, not user POV.
-
I have noted an odd behavior in Financial Reporting for some but not all users. When users are prompted for the point of view selection, for the Entity dimension all of the members are listed and not shown hierarchically. This is true of only Entity and only for some users. All other dimensions behave normally and only a few users have experienced this. Users seeing this behavior include interactive users and planners. Has anyone run into this, know what causes it, how to fix it?
(We are running EPM 11.1.1.2)
Thanks.Hi,
It seems that there is problem in POV setting. Affected users need to set the POV of reports again.
In this issue it might be possible that in users POV specific entity members are present,instead of that users have to select total entity hierarchy in users POV setting.
Hope this will help...! -
Transaction codes from end user point of view
hi all,
I am expecting end user transaction codes of warehouse management.
I am familiar with materials management but looking to learn WM.
regards,
nitin patilHi refer bellow Tcodes,
WM
0.LI21 - Clear the stock from inventory
1.LB01 - Create Transfer Requirement
2.LB02 - Change transfer requirement
3.LB03 - Display Transfer Requirement
4.LB10 - TRs for Storage Type
5.LB11 - TRs for Material
6.LB12 - TRs and Posting Change for MLEat.Doc.
7.LB13 - TRs for Requirement
8.LD10 - Clear decentralized inventory difference
9.LD11 - Clear differences for decentral.sys.
10.LI01 - Create System Inventory Record
11.LI02 - Change System Inventory Record
12.LI03 - Display System Inventory Record
13.LI04 - Print System Inventory Record
14.LI05 - Inventory History for Storage Bin
15.LI06 - Block Storage types for annual invent.
16.LI11 - Enter Inventory Count
17.LI12 - Change inventory count
18.LI13 - Display Inventory Count
19.LI14 - Start Inventory Recount
20.LI20 - Clear Inventory Differences WM
21.LI21 - Clear Inventory Differences in MM-IM
22.LL01 - Warehouse Activity Monitor
23.LLVS - WM Menu
24.LN01 - Number Ranges for Transfer Requirement
25.LN02 - Number Ranges for Transfer Orders
26.LN03 - Number Ranges for Quants
27.LN04 - Number Ranges for Posting Changes
28.LN05 - Number Ranges for Inventory
29.LN06 - Number Ranges for Reference Number
30.LN08 - Number Range Maintenance: LVS_LENUM
31.LP10 - Direct picking for PO
32.LP11 - WM staging of crate parts WM运
33.LP12 - Staging release order parts (WM-PP)
34.LP21 - WM replenishment for fixed bins WM
35.LP22 - Replenishment Planning for Fixed Bins
36.LQ01 - Transfer Posting in Invent. Mgmt
37.LQ02 - Transfer Posting in Invent. Mgmt
38.LS01 - Create Warehouse Master Record
39.LS02 - Change Warehouse Master Record
40.LS03 - Display Warehouse Master Record
41.LS04 - Display Empty Storage Bins
42.LS05 - Generate Storage Bins
43.LS06 - Block Storage Bins
44.LS07 - Block Quants
45.LS08 - Block Storage Bins per Aisle
46.LS09 - Display Material Data for Storage Type
47.LS11 - Change storage bins (multiple proc.)
48.LS12 - Block Storage type
49.LS22 - Change Quants
50.LS23 - Display Quants
51.LS24 - Display Quants for Material
52.LS25 - Display Quants per Storage Bin
53.LS26 - Stock of Material
54.LS27 - Display Quants for storage unit
55.LS28 - Display storage units / bin
56.LS32 - Change storage unit
57.LS33 - Display storage unit
58.LS41 - List of control cycles for WIP loc
59.LT01 - Create Transfer Order
60.LT02 - Create TO for Inventory Difference
61.LT03 - Create TO from Delivery Note
62.LT04 - Create TO from TR
63.LT05 - Process Posting Change Notice
64.LT06 - Create TO for Material Document
65.LT07 - Create TO for mixed storage unit
66.LT08 - Manual addition to storage unit
67.LT09 - ID point function for storage units
68.LT0A - Pre-plan storage units
69.LT0B - Stock Placement of Shipping Units
70.LT0C - Stock Removal of Shipping Units
71.LT0D - Stock Transfer of Shipping Units
72.LT0E - Create Removal TO for 2-Step Picking
73.LT10 - Create Transfer Order from List
74.LT11 - Confirm Transfer Order Item
75.LT12 - Confirm Transfer Order
76.LT13 - Confirm TO for storage unit
77.LT14 - Confirm preplanned TO item
78.LT15 - Canceling transfer order
79.LT16 - Canceling TO for storage unit
80.LT17 - Single Entry of Actual Data
81.LT1A - Change Transfer Order
82.LT21 - Display Transfer Order
83.LT22 - Display Transfer Order / Storage Type
84.LT23 - Display Transfer Orders by Numbers
85.LT24 - Display Transfer Order / Material
86.LT25 - Display Transfer Order / Reference
87.LT26 - Transfer orders for storage bin
88.LT27 - Transfer order for storage unit
89.LT28 - Display Transfer Order / Reference
90.LT31 - Print TO Manually
91.LT32 - Print transfer order for storageunit
92.LT41 - Prepare TRs for Multiple Processing
93.LT42 - Create TOs by Multiple Processing
94.LT43 - Forming groups for deliveries
95.LT44 - Release for Multiple Processing
96.LT45 - Evaluation of reference numbers
97.LT51 - Maintain Missing Stock
98.LT63 - Control: Single Entry of Actual Data
99.LT64 - Single Entry of Actual Data
100.LT72 - Determine 2-step relevance
101.LT73 - Display 2-step
102.LU01 - Create Posting Change Notice
103.LU02 - Change Posting Change Notice
104.LU03 - Display Posting Change Notice
105.LU04 - Selection of Posting Change Notices
106.LX01 - List of Empty Storage Bins
107.LX02 - Inventory List
108.LX03 - Bin Status Report
109.LX04 - Capacity Used
110.LX05 - Block Bins in Bl.Storage w .Time Limt
111.LX06 - Inventory List for Fire Department
112.LX07 - Check storage
113.LX08 - Accident Regulations List
114.LX09 - Overview of All Transfer Requirements
115.LX10 - Activities per Storage Type
116.LX11 - Overview of Documents
117.LX12 - Document Overview: Landscape Format
118.LX13 - Analysis of Differences
119.LX14 - Analysis of Material Transfers
120.LX15 - Selection of Bins for Annual Inventory
121.LX16 - Selection of Bins for Continuous Inventory
122.LX17 - List of Inventory Differences
123.LX18 - Statistics of Inventory Differences
124.LX19 - Inventory Data Takeover by Batch Inp.
125.LX20 - Generate interim storage bins
126.LX21 - Pick List for Several Transfer Order
127.LX22 - Process Inventory from Overview
128.LX23 - Stock comparison IM - WM
129.LX24 - Display of Hazardous Material numbers
130.LX25 - Inventory Status
131.LX26 - Inventory in WM via cycle counting
132.LX27 - Stock levels by shelf life expiry date
133.LX28 - Relevant TO item for ext.system
134.LX29 - Fixed bin supervision
135.LX30 - Overview of WM messages ext.system
136.LX31 - Analysis of print control tables
137.LX32 - Archived transfer orders
138.LX33 - Archived transfer requirements
139.LX34 - Archived posting change notices
140.LX35 - Archived system inventory records
141.LX36 - Archived inventory histories
142.LX37 - Linked objects
143.LX38 - Check Report Customizing Strategy K
144.LX39 - Evaluation Reference No. for 2-S.Pck
145.LX40 - Material Situation Prod. Storage Bin
146.LX41 - Bin Status Report WM/PP Interface
147.LX42 - Evaluation PP Order from WM View
148.LX43 - Consistency Check for Control Cycles MCL9
WM: Material Plcmt/Removal:Selection
149.MCLD - WM: Material flow - Selection
150.MCLH - WM: Movement types - selection -
151.OL01 - Display / change LDK34 (bins)
152.OL02 - Display / change RLPLA (bins)
153.OL03 - Display / change LDK33 (stock)
154.OL04 - Display / change RLBES (stock)
155.OL05 - Display / change LDK30 (mat.whse)
156.OL06 - Display / change LDK31 (mat.type)
157.OL07 - Data transfer stor.bins LDK34->RLPLA
158.OL08 - Data transfer stor.bins RLPLA->B.I.
159.OL09 - Data transfer stor.bins LDK34->LAGP
160.OL10 - Test storage bin data transfer
161.OL11 - Data transfer stock LDK33->RLBES
162.OL12 - Data transfer stock RLBES-> B.I.
163.OL13 - Data transfer stock LDK33->LQUA
164.OL14 - Test stock data transfer
165.OL15 - Data transfer material whse no.view
166.OL16 - Test mat.master data transfer (MLGN)
167.OL17 - Data transfer material storage type
168.OL18 - Test mat.master data transfer (MLGT)
169.OLVS C SD Menu for Master Data
170.VM01 - Create Hazardous Material
171.VM02 - Change Hazardous Material
172.VM03 - Display Hazardous Material
WM-DWM
Decentralized Warehouse Management
1.DZ00 - Introduction to Decentralized Systems
2.LD01 - Repost Communication Document
3.LD02 - Reposting multiple comm.records
4.LD03 - Display Communication Document
5.LD04 - Evaluation of Communication Doc
6.LD05 - Check LDK01 Records (internal call)
7.LD06 - Check LDK02 Records
8.LD07 - Check LDK03 Records
9.LD08 - Check LDK04 Records (internal call)
10.LD09 - Check LDK05 records
11.LN07 - Number Ranges for WM Communic.Rec. -
From Google Maps user point of view
Hi,
I come from Android and Google 's services.
I'm really impressed by Windows Phone 8 (and really happy too for my migration).
I have bought a Nokia Lumia 620.
One of more important services in Nokia is Nokia HERE Maps, for sure. Because it can replace a central Google service as Google Maps.
By the way some things are missing and I wonder if they are going to be in Nokia Maps or I will never be a 100% satisfied user and will have to deal with it.
My suggestions are:
1. A lot of POI are missing from maps. In the future can a single user add or correct POI simply from his smartphone?
Communities work well usually. It could be also that every place has a number for its actions, so you can trust for a POI with an higher number of interactions despite of a POI with only one random action.
2. Can I save POI to create a personal map and then view it as a layer on the main map?
For example "restaurants in Milan".
3. Nokia Maps still lack of calendar and contacts integration but, probably, it's more on Microsoft.
Thanks!And a "save to contacts" function too.
-
From the End User Point of view
Hi,
Suppose i have scenario like file to idoc, the file should run every day night,when any errors occur at idoc side how can end user know whether it is successfully updated at R/3 side or not. In this scenario exactly what is role of end user what will he do.
Thanks in advance.
Regards,
Prem.SHi Prem,
In this case the end user/basis team/ ie basically who ever is responsible for monitoring has to go to transaction WE02/WE05 to monitor if any error has occured in posting the application document.
if any error is there in WE02 then he can go to transaction BD87 and repost the idocs.
Cheers,
Sumit
ps : reward points if that helped u. -
Step by step Funds Management (from a user point of view)
Hi,
Kindly provide me the details of the steps (step by step) to be followed to upload the budget (by a user).
Regards,
Vikas MalhotraHi Viki,
Check out this doc
http://www.copacustomhelp.state.pa.us/infopak/nav/budget/index.htm
Assign points if useful
Regards
Genie -
User point of view in POV on FR
hi,
I have a report in whichi have selected version dimension in POV and when i run the report via workspace it prompts me to select version dimension member but there is another admin trying to run the same report and
when he tries to select the version member instead he is prompted to select the memeber from year dimension. The first dialogue box that pops up when we run workspace says select memeber for version dimension but when he tries
to browse for the other memeber in the other dialogue box that opens and shows members from year dimension.
I am on planning 9.2 please help its driving me crazy
Edited by: user4958421 on Jul 23, 2009 12:04 PMSounds like a corrupt POV to me. There is a utility in the Hyperion\BIPlus\bin folder called DeletePov.cmd that will clean this up. Go to a command prompt and the change directory to the Hyperion\BIPlus\bin folder and do DeletePov /? for details. Once deleted, get him to try again.
Hope this helps.
Sean -
Multi Grip FR report Point of view
i have build multi grip FR report . i am using same user point of view for cost center dimension in both grip . when i run report and change the cost center at All it doesnt change the cost center in both the grip .
Do i need to make any setting changes to make it effective ? buf if i go to individual point of view and change cost center then it works fine
can any body help me to resolve this
thanksHow is the pov selected in both the reports? Are you using grid POV?
Regards
Celvin
http://www.orahyplabs.com -
POINT OF VIEWS Related to GRID ,USER,BOOK
HI,
i am new for Reporting side,could you please give some clarity on below point of views.
User POV,
GRID POV
BOOK POV
And how we define all point of views.
Appreciating your Help
Thanks
RaviHi Ravi
User POV allows user to select any member from a dimension at run time (provided they have security access to see it).
Grid POV allows you to restrict the user POV for a particular grid within the report (remember you can have multiple grids in a report) to a single member without having to define it in the rows / columns of the grid itself, e.g. you may always want a grid to look at 'Total Customers' rather than make the user select it on their own POV
Book POV allows you to set the POV for a dimension where it has not previously been defined in the individual reports that make up the book, e.g. if you are producing monthly report packs all of your reports might have 'Period' on the POV, normally when users run the reports they can select the period but for the book you can define this to apply to all reports where 'Period' is on the POV.
Batch POV, that you do not mention, is also available and is similar to Book POV but where you might run multiple books as part of a batch if there are any POV selections not set at either report or book level then you can set them at batch level. Again a similar example might be 'Period' where you run a batch of reports for the 'current_month' using a substitution variable.
Hope this helps
Stuart -
OIF-What's the diff. from user's point of view of SP/IdP initiated SSO
I'm using OIF for federated single sign on. I got both the SP and IdP initiated SSO works. When I provide both URL to customer, how should I suggest which one to use? from end user's point of view, both of them works in the similar work flow: type(click) URL -> redirect to IdP's login page -> login -> return back to application. only diff. seems the URL. most of user even did not notice the diffrence between 2 URLs.
Could some give some suggestion when and which one is preferred.
ThanksProbabaly. however, in our case, the application url, e.g. http://appurl is used for non-federate sign on. so that the applicaiton can be run independent of IdP, e.g. IdP down.
To allow federate sign on, we use one of following (as documented in OIF admin guide):
SP initiated:
http://SP host:port/ fed/sp/initiatesso?providerid=<SP provider Id>& returnurl=<http://appurl>
IdP initiated:
http://IdP host:port/fed/idp/initiatesso?providerid =<IdP provider Id>& returnurl=<http://appurl>
So, you can see these does not support bookmark of federate sso since they would return back to http://appurl after federate sign on.
Any suggestion? we couldn't tell good diffrence about above urls to our customer. is there anyway to allow us enable bookmark the federated sso?
Thanks -
Hi sd gurus,
can u send me the screen shots for cin in sd sales point of view,like what are condition types in pricing procedure,and when we are doing sales,what about pricing procedure like we have to use two pricing procedures standard rvaa01 and what about taxinn ,or else we have to include all condition types in taxinn plz send me in detail step by step
thanks & regards,
srinivas.TDear Srinu,
What is CIN?
CIN Means Country India Version
In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenarios. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself.
Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better)
Country Version India comes with four pricing procedures as follows:
- JINFAC (Sales from manufacturing plants)
- JINEXP (Export sales)
- JINDEP (Sales from depots)
- JINSTK (Stock transfers
CIN: IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings > Maintain Excise Registrations
In this IMG activity, you maintain the data relating to your excise registrations.
- Enter each of your excise registrations, specifying a four-character code for each Excise Registration Ids
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
- For each excise registration in your business create a registration ID, and state:
- Which taxes the registration covers (additional excise duty, special excise duty, and cess) Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
- The maximum number of items to be printed on each excise invoice
- Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
ECC Number: Specifies the organization's ECC number.
Excise Registration Number: A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division: Specifies the excise division in whose area the excise registration is located.
Excise Collectorate: The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming, AED usage Additional Excise duty Percentage.
These are livable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty. Example - Additional Excise duty is livable in case of textile products, tobacco and sugar.
Similarly for SED CESS Number of Items in Excise Invoice Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies - This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements. This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description: Description of the excise registers set.
Partial CENVAT Credit: Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account
Dependencies - When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings.
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings.
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator - Excise year start month. The calendar month marking the beginning of the excise year. This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure :Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received. Number of excise invoices to be selected Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection Number of days from document date for excise invoice selection.
Example - If the value of this field is 20 and today is 28-03-97. The excise invoice selection will show the related invoices only for the period 08-03-97 to 28-03-97.
Document type for TDS FI posting: Financial accounting document type for TDS posting.
Document type for FI posting on Utilisation Financial accounting document type for TDS posting.
Indicator for item level excise duty round off - This indicator is to be used for deciding whether Item level excise
duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice - You can round off the Excise amount to be paid during an outgoing
Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods - Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts. The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account - Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type - Key representing a type of exchange rate in the system.
- You enter the exchange rate type to store different exchange rates. Example - You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts - When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings - In this IMG activity, you maintain excise information relating to your plants.
Plant Settings - In this activity, you maintain excise information relating to your plants.
For each plant:
- Specify whether it is a manufacturing site or a depot.
- Assign it an excise registration ID. - You can assign the same ID to more than one plant, if required.
Depot - Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
- Number of goods receipt per excise invoice.
- Multiple GR for one excise invoice, Single credit
- Multiple GR for one excise invoice, multiple credit
Maintain Excise Groups - In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups - In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation - Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
1. Create one excise group for each set of registers that you need to keep.
2. Assign the excise groups to plants.
3. Maintain whether this Excise group is for a depot or not.
If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock. Excise Group Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration. - In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to. At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
- GR Per Excise Invoice
- Multiple GR for one excise invoice , Multiple credit
- Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically - Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background. - If you want to make use of this function, you must also define the
default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option - RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step. If this is not selected then you need to separately do RG23D selection
followed by PGI and then RG23D verification and posting. If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR - If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo Posting - If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
- Blocked stock
- Stock transport order
- Consignment stock
Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
- Define excise series groups based on type of outgoing document
- Assign series group to excise registration ID
- If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
- If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
- No account postings for CENVAT in sales cycle
- No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators - In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty > Select Tax Calculation Procedure
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
- If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
- If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults - In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
- Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
- Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
- Specify the conditions in the sales order that are used for excise rates.
- Specify the countervailing duty condition type used for import purchase orders.
See also : SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features : The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Customizing : Make the settings in Customizing Basic -> India -> for Logistics General, by choosing Taxes on Goods Movements Account -> Excise Duties Using Condition Technique and -> Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data - Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities - When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for. On the dialog box, Control Code means "chapter ID." So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose .
5. Enter data as required. - In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination - When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data®access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.
You maintain the following types of data:
- Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone. See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
- Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry. For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
- Customer master data
Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
- Material master data
Each material is assigned a chapter ID.
- Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant. Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indicator is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under
status 7.
Define Tax Code for Purchasing Documents - In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents. Only carry out this activity if you use condition-based excise
determination.
- Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
- Assign Tax Code to Company Codes
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types - In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method. The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a
purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here. In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
- For taxes on purchases, use the condition types contained in the tax procedure.
- For taxes on sales, use the condition types contained in the pricing procedures.
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes - In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements - You have set up G/L accounts for each of the processing keys listed below.
- Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
- VS1 (basic excise duty)
- VS2 (additional excise duty)
- VS3 (special excise duty)
- VS5 (sales tax setoff)
- MWS (central sales tax)
- MW3 (local sales tax)
- ESA (service tax)
- ESE (service tax expense)
Specify Excise Accounts per Excise Transaction - In this IMG activity, you specify which excise accounts (for excise
duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type. If you use sub transaction types, enter the accounts for each sub transaction type as well.
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly. The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example:
- Excise TT DC ind Account name
- GRPO CR CENVAT clearing account
- GRPO CR RG 23 BED account
- GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction - In this IMG activity, you assign the excise and CENVAT accounts to G/L
accounts. When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
- Excise group
- Company code
- Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
- Defined the G/L accounts
- Defined the excise groups
- Maintained the transaction accounts
Activities - For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note : you need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty. Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small configuration step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
- Material Master à Logistics General
1. Go to IMG Define Structure of Data Screen for each Configuring the Material master Screen Sequence.
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Sub screens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view sub screen and ensure that the sub screen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade
Import, Excise related sub screen appears.
A small search on SDN SD forum will help you to answer your query.
I will suggest you to visit http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
Moreover there is a separate section of FAQs with answers which will help you in great deal.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
Maybe you are looking for
-
Please, help me with with Report Engine SDK!
I am using Report Engine SDK. This is my code: <%@ page import="com.crystaldecisions.sdk.framework.*"%> <%@ page import="com.crystaldecisions.sdk.exception.SDKException"%> <%@ page import="com.crystaldecisions.sdk.occa.infostore.IInfoStore"%> <%@ pag
-
Help!- problems with Adobe reader v9 ifilter and sqlserver2005
Hello, I am trying to implement search of pdf in binary column in sqlserver2005 using Adobe ifilter. I installed full version of Adobe reader v9 which has its own Ifilter on my server (runs on 32bit) I have done the following based on what i read on
-
My search box wont allow me to search for anything -- it just started doing it. I just got upgraded to firefox 9. Neither Bing, Google, or Yahoo work. Plus, I've noticed that filling in data while on the web, what I write takes forever and words and
-
Code inspector, SQL trace
Hi all, Can anyone help me to analyse the output of sql trace and code inspector that we do for a program. Thanks & regards, Saroja.
-
What is the relation between COST ELEMENT , COST CENTER n CONTROLLING AREA
Hai can any one help me in understanding what is the relationship between COST ELEMENT COST CENTER and CONTROLLING AREA. and what actualy they explain me from basics. thank's in advance.