User POV does not pop up from Report in task list

Hello,
I've created a report within Related Content in HFM and added it to a task list--the problem I'm experiencing is when I run the report the User POV does not pop up, rather it simply uses the default POV (ie, whatever is set up in data grids or process management)--this happens if I try to run it directly from Related Content or from the task list. My preferences within Financial Reporting have already been updated to 'On' to preview the User POV and if I run the report from Financial Reporting (ie, Explore) the User POV works fine--so, it seems like adding a report to Related Content disables the User POV from popping up. I'm running on Financial Reporting v11.1.2.1 and HFM v11.1.2.1.104.3701. I can't find anything about it within this forum, knowledge base or as a known issue in the ReadMe for the .104 patch set for HFM.
Can anybody fill me in on if this is functionality by design or a defect?
Best regards,
Jason Call

Financial Reports do not work as you might expect when they are used as a related content item. As you already have realized, you will not be able to adjust the FR POV items from inside of HFM.
A 'work around' would be to link to the report and put that link in the Tasklist. This will then open the report 'normally' and you will get the POV functionality that you expect.
To find the link to a report, open the report's properties and look at the 'smartcut' value. (That is a URL directly to the report)

Similar Messages

  • Google searchbar does not load page from search box dropdown list?

    When i type a Google search using my search box from Google toolbar, the results show up in the drop down box, but when i click on desired search to see results and load Google page nothing happens and whatever i was typing in search bar remains in tact, usually in incomplete form. The Google search box on top next to the address bar to right works fine but i prefer to use the Google Toolbar search i have always used. The same thing is happening on my other computer that i upgraded to FF 4.0 so this must be a glitch or bug in new version??

    Strange things still go on.
    I disabled instant search results and now the google search window refreshes constantly.
    I cannot even revert to enable instant search because the google settings refresh too quickly to do the change.
    That is really weird and I do not know how to get FF back to working correctly now.

  • I am not able to email a file from Adobe Reader. When I click to share the file, the option does not pop up to share (via Mail, Message, Air Drop, etc.).

    I am not able to email a file from Adobe Reader. When I click the button to share a file, there is no option for route from which to share (Message, Mail, Air Drop, etc. does not pop up).

    What version of Reader and OS X?

  • Hi um i have the ipod 5 and my computer seems to be fine with the wifi but when i pressed wifi and my wifi does not pop up it i put it on airplane mode reset the  networks erased my safari history . and it still has not read my wireless internet ?

    hi um i have the ipod 5 and my computer seems to be fine with the wifi but when i pressed wifi and my wifi does not pop up it i put it on airplane mode reset the  networks erased my safari history . and it still has not read my wireless internet ?

    If not:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Access DB (& .ldb file) does not close after crystal reports

    Post Author: mgold
    CA Forum: Crystal Reports
    Access DB (& .ldb file) does not close after crystal reports
    Hi! We have a VB application using Crystal Reports 6 that has worked successfully on hundreds of systems for over 10 years. Now, on one network, the application and access database does not close. It seems to hang on the [.Close] command.
    When we open the application an peruse the screens without opening up a report (using crystal reports), the application and access db closes fine. But as soon as we run a report and then close the report and try to close the application, the access db does not close. Many of the screens open the db and grab data from the access db, but it's only after running crystal reports that we have this problem. (Please see more information below.)
    Setup: Application and data (access 97 db) reside on a server in the same folder, but application shortcut is kicked off on client PC. Kicking off the shortcut on the client PC means that the image/process runs on the client PC (not on the server). In this problem case, the application shortcut is on a Windows XP Pro Version 2002 SP2 PC with the app & data on a Windows 2003 server. Users are local Admins on their PCs with "Full Control"over the directory and files on the server where the data (access 97 db) resides. This type of setup is typical and has worked without any problems for clients.
    The application is written in Visual Basic, using Crystal Reports 6 (using DAO). We close the recordset, set it to zero and then it hangs on closing the db (.Close command).
    A few key pieces of information:
    - The application closes fine if the app & data (access 97 db) are on a local PC. This includes closing fine if the application is run directly on the Windows 2003 server where the data is stored.
    - It worked on this client's network until sometime in the last few weeks.
    - One thing that changed is that the company is using VMWare on its servers. Not sure if they started using VMWare at the same time as it started failing. This may be unrelated. Possibly other things changed, but can't get any more information ... yet.
    - It works fine running the application from a Windows Vista PC with a user who is a domain admin.
    - The access db and application hang for about 10-20 minutes and then eventually closes. It appears that somehow
    Crystal Reports is keeping the db open, but I'm not sure why.The application doesn't quit and the database doesn't close even if I try to end the task with the Task Manager.
    - The Crystl32.ocx version being used is 8.0.0.4 (if that matters).
    - I copied 6 month old program files and database files to a test folder on the Windows 2003 server. It fails using these files that worked fine 6 months ago.
    Any ideas or help would be greatly appreciated! If you know of another good place to post this, please let me know.
    Thanks!
    - Mark

    Crystal doesn't support tables in HTML interpretation. 
    You can probably work your way around this by doing Replace() calls on the relevant tags.
    See:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333033383334%7D.do
    The supported HTML tags are:
    " html
    " body
    " div (causes a paragraph break)
    " tr (causes only a paragraph break; does not
    preserve column structure of a table)
    " span
    " font
    " p (causes a paragraph break)
    " br (causes a paragraph break)
    " h1 (causes a paragraph break, makes the font bold
    & twice default size)
    " h2 (causes a paragraph break, makes the font bold
    & 1.5 times default size)
    " h3 (causes a paragraph break, makes the font bold
    & 9/8 default size)
    " h4 (causes a paragraph break, makes the font bold)
    " h5 (causes a paragraph break, makes the font bold
    & 5/6 default size)
    " h6 (causes a paragraph break, makes the font bold
    & 5/8 default size)
    " center
    " big (increases font size by 2 points)
    " small (decreases font size by 2 points if it's 8
    points or larger)
    " b
    " i
    " s
    " strike
    " u
    The supported HTML attributes are:
    " align
    " face
    " size
    " color
    " style
    " font-family
    " font-size
    " font-style
    " font-weight

  • OUI-10182 - The effective user ID does not match

    Hi guys,
    I tried searching for this error first but couldn't find anything. The install guide says to runInstaller as oracle user so I moved the database folder in to my oracle folder, logged in and ran the installer. At the install product stage I receive this error:
    OUI-10182 - Th e effective user ID does not match the owner of the file, or the process is not the super-user, the system indicates that super-user privilege is required.
    I get the same error when logged in as oracle and running the install folder from my own user account
    Thanks a lot
    Mike.

    Hi Orion, your method worked and everything seemed to install but at database configuration I get this:
    INS-20802 - Oracle Net Configuration Assisstant failed
    Cause - The plug-in failed in its perform method Action - Refer to the logs or contact Oracle Support Services. Log File Location
    /u01/app/oraInventory/logs/installActions2011-02-20_06-54-09PM.log
    Here is some of the log file:
    INFO: Started Plugin named: Oracle Net Configuration Assistant
    INFO: Found associated job
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: Starting 'Oracle Net Configuration Assistant'
    INFO: Parsing command line arguments:
    INFO: Parameter "orahome" = /u01/app/oracle/product/11.2.0/db_1
    INFO: Parameter "orahnam" = OraDb11g_home1
    INFO: Parameter "instype" = typical
    INFO: Parameter "inscomp" = client,oraclenet,javavm,server,ano
    INFO: Parameter "insprtcl" = tcp
    INFO: Parameter "cfg" = local
    INFO: Parameter "authadp" = NO_VALUE
    INFO: Parameter "responsefile" = /u01/app/oracle/product/11.2.0/db_1/network/install/netca_typ.rsp
    INFO: Parameter "silent" = true
    INFO: Done parsing command line arguments.
    INFO: Oracle Net Services Configuration:
    INFO: #
    INFO: # An unexpected error has been detected by HotSpot Virtual Machine:
    INFO: #
    INFO: # SIGSEGV (0xb) at pc=0xa2e3b35e, pid=9903, tid=3086489808
    INFO: #
    INFO: # Java VM: Java HotSpot(TM) Server VM (1.5.0_17-b02 mixed mode)
    INFO: # Problematic frame:
    INFO: # C [libnnz11.so+0x3c35e]
    INFO: #
    INFO: # An error report file with more information is saved as hs_err_pid9903.log
    INFO: #
    INFO: # If you would like to submit a bug report, please visit:
    INFO: # http://java.sun.com/webapps/bugreport/crash.jsp
    INFO: #
    WARNING: /u01/app/oracle/product/11.2.0/db_1/bin/netca: line 178: 9903 Aborted $JRE $JRE_OPTIONS -classpath $CLASSPATH oracle.net.ca.NetCA $*
    WARNING:
    INFO:
    INFO: Completed Plugin named: Oracle Net Configuration Assistant

  • Firefox does not send a crash report.

    Mac OS 10.6.3 Firefox 3.6.7
    Firefox does not send an error report after it crashes. It crashes consistently when accessing certain pages when Shockwave Flash 10.1 r53 10.1.53.64 is enabled, but never sends a crash report.
    == This happened ==
    Every time Firefox opened
    == I noticed the problem in early July 2010 after upgrading Shockwave.

    More information:
    Firefox produces a crash file, but does not send it.
    There are 19 July 2010 reports in /Users/me/Library/Logs/DiagnosticReports/ including 5 from today.
    A plist file was created or modified at the same time that the as the last crash report. It contains OS and Firefox versions.
    The directory /Users/tvd/Library/Application Support/Firefox/Crash Reports/pending is empty. The permission are 700. I am the owner.
    The last report submitted was Mar 4, 2010:
    tail -1 /Users/me/Library/Application\ Support/Firefox/Crash\ Reports/submit.log
    [Thu Mar 4 22:03:14 2010] Crash report submitted successfully

  • RDS Gateway + Smart Card Error [ The specified user name does not exist.]

    I have the following Windows Server 2008 R2 servers:
    addsdc.contoso.com, AD DS Domain Controller for contoso.com
    adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
    fileserver.contoso.com, RDS Session Host for Administration enabled
    rdsgateway.contoso.com, RDS Gateway enabled
    tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
    And the following Windows 7 PCs:
    internalclient.contoso.com
    externalclient.fabrikam.com
    There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
    I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
    From internalclient.contoso.com, I can RDP to fileserver.contoso.com
    using the smart card just fine with no certificate errors.
    From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
    via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
    From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
    via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
    BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
         The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support. 
    When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
    - but I'm pretty sure this is a supported scenario?
    The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
    [email protected] which matches the UPN of the user account as it was auto-enrolled.
    Does anyone have any ideas?

    I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
    to use NLA.

  • JSPM phase error : admin/user/SID does not exist

    Hi ,
    There is an error message while opening the JSPM
    Phase error report:
    "cannot read secure store properties .could not set up secure store.property admin/user/SID does not exist.msg.util.dyn.0003.com.sap.security.core.server.secstore.secstoreFS get string value
    com.sap.security.core.server.secstore.secstoreFS.Not found exception could not find a record key "admin/user/SID" in the store com.sap.security.core.server.secstore.secstorefs"
    checked the config tool secure store and found no entry maintained for /admin/user/SID.
    How to add the new entry in config tool and what is post entry procedure
    Thanks a ton

    Hello Daniel,
    You can maintain the Administrator user in secure storage using the config tool.
    By default, the value for this config tool property is user Administrator. However, when using the ABAP Engine for persistency, this user is J2EE_ADMIN.
    Following are the steps:
           1.      Start the Config Tool.
           2.      Select secure store.
                    The configuration for the secure storage in the file system appears.
           3.      Select the key admin/user/<SID>.
           4.      Enter J2EE_ADMIN in the Value: field and choose Add. 
           5.      Select the key admin/password/<SID>.
           6.      Enter the password for J2EE_ADMIN in the Value: field and choose Add.
           7.      Save the configuration.
    The corresponding link is mentioned below:
    http://help.sap.com/saphelp_nw04/helpdata/en/ae/b7ceff3e40fd42be3a6503236f9746/content.htm

  • My MacBook Pro is not recognizing my external hard drive.  The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data.  Is there any way to resolve this?

    My MacBook Pro is not recognizing my external hard drive.  The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data.  Is there any way to resolve this?

    WE know Disk Warrior is more reliable, hence more useful, and should be in any disk mechanics toolchest.
    For the record, I don't know anything of the kind. I have yet to see evidence that Disk Warrior is useful at all.
    What I do know is that you seem to take every opportunity you get to promote it in these forums. Do you work for Alsoft?
    Let me be a little more explicit. My opinion is that Disk Warrior is a waste of money if one has backups. If a journaled HFS directory is so badly corrupted that it can't be repaired by Disk Utility, then the volume should be reformatted and restored from backup, which has the same effect as running DW, but is probably faster and doesn't cost $99.

  • User SYSTEM does not exist

    Hi there,
    Using the MDK:
    -I have set up my publication items
    -added them to my publication
    -used the packaging wizard to setup my application and attach it to the publication
    -used the Oracle Mobile administrator to create a user.
    -used the Oracle Mobile administrator to assign the user to the application.
    On Win32, I download the WIN32 Setup and run it with the user and password.
    It sets up the DMAgent, etc, and installs all of the oracle lite stuff into c:\mobileclient
    Next, I run MSYNC.EXE with the user's name. It completes successfully. What happens next is very strange:
    C:\Documents and Settings\allen>msql system/moogle@polite:tenchi_pman
    Oracle Lite MSQL Version 10.3.0.1.0
    Copyright (c) 1997, 2007, Oracle. All rights reserved.
    [POL-5246] user SYSTEM does not exist
    C:\Documents and Settings\allen>
    Has anyone encountered this?
    Thanks,
    Allen
    p.s. my environment details are as follows:
    Mobile Repository Configuration
    Operating System: Linux 2.6
    Oracle Database: 10.2.0.3.0
    Mobile Server Configuration (all the latest patches applied at this time)
    Mobile Server Install Type: Standalone
    Operating System: Microsoft Windows XP
    Mobile Server: 10.3.0.1.0
    Secure Socket Layer: No
    Part of Web Farm: No
    Java J2SE: 1.5.0_15
    Mobile Client Configuration
    Mobile Client Type: Windows 32
    Operating System: Microsoft Windows XP SP2
    Mobile Client: 10.3.0.1.0

    Is there a way for me to create the SYSTEM user in the Oracle Lite database, or is this error a symptom of a different problem?
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.CAT (TABLE_NAME, TABLE_TYPE) AS SELECT TABLE_NAME, TABLE_TYPE FROM SYSTEM."okClass" WHERE TABLE_TYPE IN ('TABLE', 'VIEW')
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_CONSTRAINTS (OWNER, CONSTRAINT_NAME, CONSTRAINT_TYPE, TABLE_NAME, SEARCH_CONDITION, R_OWNER, R_CONSTRAINT_NAME, DELETE_RULE, STATUS, VALIDATED) AS SELECT OWNER, CONSTRAINT_NAME, CONSTRAINT_TYPE, TABLE_NAME, SEARCH_CONDITION, R_OWNER, R_CONSTRAINT_NAME, DELETE_RULE, STATUS, VALIDATED FROM SYSTEM.POL__CONS
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_CONS_COLUMNS ( OWNER, CONSTRAINT_NAME, TABLE_NAME, COLUMN_NAME, POSITION) AS SELECT OWNER, CONSTRAINT_NAME, TABLE_NAME, COLUMN_NAME, POSITION FROM SYSTEM.POL__COLUSAGE
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.TABLE_PRIVILEGES ( OWNER, TABLE_NAME, GRANTOR, GRANTEE, GRANT_TYPE, GRANTABLE) AS SELECT OWNER, TABLE_NAME, GRANTOR, GRANTEE, GRANT_TYPE, GRANTABLE FROM SYSTEM.ALL_PRIVILEGES WHERE OBJECT_TYPE = 0
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.COLUMN_PRIVILEGES ( OWNER, TABLE_NAME, COLUMN_NAME, GRANTOR, GRANTEE, GRANT_TYPE, GRANTABLE) AS SELECT OWNER, TABLE_NAME, COLUMN_NAME, GRANTOR, GRANTEE, GRANT_TYPE, GRANTABLE FROM SYSTEM.ALL_PRIVILEGES WHERE OBJECT_TYPE = 5
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_VIEWS ( OWNER, VIEW_NAME, TEXT_LENGTH, TEXT) AS SELECT TABLE_SCH, TABLE_NAME, VIEW_LEN, VIEW_TEXT FROM SYSTEM."okClass" WHERE TABLE_TYPE IN ('VIEW')
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_TABLES ( OWNER, TABLE_NAME, TABLESPACE_NAME, CLUSTER_NAME, PCT_FREE, PCT_USED, INI_TRANS, MAX_TRANS, INITIAL_EXTENT, NEXT_EXTENT, MIN_EXTENTS, MAX_EXTENTS, PCT_INCREASE, BACKED_UP, NUM_ROWS, BLOCKS, EMPTY_BLOCKS, AVG_SPACE, CHAIN_CNT, AVG_ROW_LEN) AS SELECT TABLE_SCH, TABLE_NAME, CAST('OOT' AS VARCHAR(128)), CAST(NULL AS VARCHAR(128)), CAST(0 AS INTEGER), CAST(0 AS INTEGER), CAST(0 AS INTEGER), CAST(0 AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS VARCHAR(1)), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER) FROM SYSTEM."okClass" WHERE TABLE_TYPE IN ('TABLE')
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_TAB_COLUMNS ( OWNER, TABLE_NAME, COLUMN_NAME, DATA_TYPE, DATA_LENGTH, DATA_PRECISION, DATA_SCALE, NULLABLE, COLUMN_ID, DEFAULT_LENGTH, DATA_DEFAULT, NUM_DISTINCT, LOW_VALUE, HIGH_VALUE, IS_HIDDEN) AS SELECT COLUMN_SCH, TABLE_NAME, COLUMN_NAME, CASE TYPE_CODE WHEN -16 THEN 'NCLOB' WHEN -15 THEN 'CLOB' WHEN -14 THEN 'BLOB' WHEN -13 THEN CAST('LONG' AS VARCHAR(30)) WHEN -12 THEN 'NUMBER' WHEN -11 THEN 'ROWID' WHEN -10 THEN 'LONG RAW' WHEN -9 THEN 'RAW' WHEN -8 THEN 'TINYINT' WHEN -7 THEN 'LONG VARBINARY' WHEN -6 THEN 'VARBINARY' WHEN -5 THEN 'BINARY' WHEN -4 THEN 'BIGINT' WHEN -3 THEN 'LONG VARCHAR' WHEN -2 THEN 'REF' WHEN -1 THEN 'UNKNOWN' WHEN 1 THEN 'CHAR' WHEN 2 THEN 'NUMERIC' WHEN 3 THEN 'DECIMAL' WHEN 4 THEN 'INTEGER' WHEN 5 THEN 'SMALLINT' WHEN 6 THEN 'FLOAT' WHEN 7 THEN 'REAL' WHEN 8 THEN 'DOUBLE' WHEN 9 THEN CASE SUBTYPE_CODE WHEN 1 THEN CAST('DATE' AS VARCHAR(9)) WHEN 2 THEN 'TIME' WHEN 4 THEN 'TIMESTAMP' ELSE 'EMPTY' END WHEN 10 THEN 'INTERVAL' WHEN 12 THEN 'VARCHAR' WHEN 13 THEN 'VARCHAR2' WHEN 14 THEN 'BIT' ELSE 'EMPTY' END, CASE WHEN TYPE_CODE <> 9 THEN COL_PRECISION WHEN TYPE_CODE = 9 AND SUBTYPE_CODE = 1 THEN 8 WHEN TYPE_CODE = 9 AND SUBTYPE_CODE = 2 THEN 6 WHEN TYPE_CODE = 9 AND SUBTYPE_CODE = 4 THEN 15 ELSE CAST(NULL AS INTEGER) END, CASE WHEN TYPE_CODE NOT IN (-16, -15, -14, -13, -11, -10, -9, -7, -6, -5, -3, 1, 9, 12, 13) THEN COL_PRECISION ELSE CAST(NULL AS INTEGER) END, CASE WHEN TYPE_CODE IN (-12, 2, 3, 4, 5, 10) THEN COL_SCALE ELSE CAST(NULL AS INTEGER) END, CASE NULLABILITY WHEN 0 THEN CAST('N' AS VARCHAR(1)) ELSE 'Y' END, POSITION, CASE DEFAULT_LENGTH WHEN 0 THEN CAST(NULL AS INTEGER) ELSE DEFAULT_LENGTH END, CASE DEFAULT_LENGTH WHEN 0 THEN CAST(NULL AS VARCHAR(4096)) ELSE DATA_DEFAULT END, CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CASE ISHIDDEN WHEN 0 THEN CAST('N' AS VARCHAR(1)) ELSE 'Y' END FROM SYSTEM."okAttr" WHERE TABLE_TYPE IN ('TABLE', 'VIEW')
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.USER_OBJECTS ( OWNER, OBJECT_NAME, OBJECT_ID, OBJECT_TYPE, CREATED, LAST_DDL_TIME, CREATED_TIME, STATUS) AS SELECT SCHEMA_NAME, OBJECT_NAME, OBJECT_ID, CASE OBJECT_TYPE WHEN 0 THEN CAST('TABLE' AS VARCHAR(128)) WHEN 1 THEN 'VIEW' WHEN 2 THEN 'INDEX' WHEN 3 THEN 'SEQUENCE' ELSE 'SYNONYM' END, CAST(CREATED AS DATE), CAST(CREATED AS DATE), CAST(CAST(CREATED AS TIMESTAMP(0)) AS VARCHAR(128)), CAST('VALID' AS VARCHAR(128)) FROM SYSTEM.POL__ALLOBJ WHERE OBJECT_NAME NOT LIKE 'POL_%' AND SCHEMA_NAME IN (SELECT NAME FROM POL__SCHEMATA WHERE OWNER = USER)
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_USERS ( USERNAME, USER_ID, CREATED) AS SELECT USERNAME, USER_ID, CREATED FROM SYSTEM.POL__USERS
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_OBJECTS ( OWNER, OBJECT_NAME, OBJECT_TYPE, CREATED, STATUS) AS SELECT SCHEMA_NAME, OBJECT_NAME, CASE OBJECT_TYPE WHEN 0 THEN CAST('TABLE' AS VARCHAR(128)) WHEN 1 THEN 'VIEW' WHEN 2 THEN 'INDEX' WHEN 3 THEN 'SEQUENCE' ELSE 'SYNONYM' END, CAST(CREATED AS DATE), CAST('VALID' AS VARCHAR(128)) FROM SYSTEM.POL__ALLOBJ
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ACCESSIBLE_COLUMNS ( OWNER, TABLE_NAME, COLUMN_NAME, DATA_TYPE, DATA_LENGTH, DATA_PRECISION, DATA_SCALE, NULLABLE, COLUMN_ID, DEFAULT_LENGTH, DATA_DEFAULT, NUM_DISTINCT, LOW_VALUE, HIGH_VALUE) AS SELECT COLUMN_SCH, TABLE_NAME, COLUMN_NAME, CASE TYPE_CODE WHEN -4 THEN CAST('BIGINT' AS VARCHAR(128)) WHEN -3 THEN 'LONGVARCHAR' WHEN -2 THEN 'REF' WHEN -1 THEN 'UNKNOWN' WHEN 1 THEN 'CHAR' WHEN 2 THEN 'NUMERIC' WHEN 3 THEN 'DECIMAL' WHEN 4 THEN 'INTEGER' WHEN 5 THEN 'SMALLINT' WHEN 6 THEN 'FLOAT' WHEN 7 THEN 'REAL' WHEN 8 THEN 'DOUBLE' WHEN 9 THEN 'DATETIME' WHEN 10 THEN 'INTERVAL' WHEN 11 THEN 'VARCHAR' ELSE 'EMPTY' END, CASE WHEN TYPE_CODE IN (-3, 1, 11) THEN COL_PRECISION ELSE CAST(NULL AS INTEGER) END, CASE WHEN TYPE_CODE NOT IN (-3, 1, 11) THEN COL_PRECISION ELSE CAST(NULL AS INTEGER) END, CASE WHEN TYPE_CODE IN (2, 3, 4, 5, 9, 10) THEN COL_SCALE ELSE CAST(NULL AS INTEGER) END, CASE NULLABILITY WHEN 0 THEN CAST('N' AS VARCHAR(1)) ELSE 'Y' END, POSITION, CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER) FROM SYSTEM."okAttr" WHERE TABLE_TYPE IN ('TABLE', 'VIEW')
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_INDEXES ( OWNER, INDEX_NAME, TABLE_OWNER, TABLE_NAME, TABLE_TYPE, UNIQUENESS) AS SELECT SCHEMA_NAME, INDEX_NAME, TABLE_SCHEMA, TABLE_NAME, CAST('TABLE' AS VARCHAR(10)), IS_UNIQUE FROM SYSTEM.POL__INDICES
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_IND_COLUMNS ( INDEX_OWNER, INDEX_NAME, TABLE_OWNER, TABLE_NAME, COLUMN_NAME, COLUMN_POSITION) AS SELECT SCHEMA_NAME, INDEX_NAME, TABLE_SCHEMA, TABLE_NAME, COLUMN_NAME, INDEX_POSITION FROM SYSTEM.POL__INDICESDT
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_COL_COMMENTS ( OWNER, TABLE_NAME, COLUMN_NAME, COMMENTS) AS SELECT COLUMN_SCH, TABLE_NAME, COLUMN_NAME, COLUMN_COMMENT FROM SYSTEM."okAttr" WHERE COLUMN_COMMENT IS NOT NULL
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_TAB_COMMENTS ( OWNER, TABLE_NAME, TABLE_TYPE, COMMENTS) AS SELECT TABLE_SCH, TABLE_NAME, TABLE_TYPE, TABLE_COMMENT FROM SYSTEM."okClass" WHERE TABLE_COMMENT IS NOT NULL
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_SYNONYMS ( OWNER, SYNONYM_NAME, TABLE_OWNER, TABLE_NAME, DB_LINK) AS SELECT OWNER, SYNONYM_NAME, TABLE_OWNER, TABLE_NAME, CAST('NULL' AS VARCHAR(128)) FROM SYSTEM.POL__SYNONYM
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_SEQUENCES ( SEQUENCE_OWNER, SEQUENCE_NAME, MIN_VALUE, MAX_VALUE, INCREMENT_BY) AS SELECT SCHEMA_NAME, SEQ_NAME, MIN_VALUE, MAX_VALUE, INC_BY FROM SYSTEM.POL__SEQ WHERE SEQ_NAME NOT LIKE 'POL_%'
    Tid=0f34, Statement Text:CREATE VIEW SYSTEM.DATABASE_PARAMETERS AS SELECT PARAMETER, VALUE FROM SYSTEM.POL__DATABASE_PARAMETERS
    Does anything look amiss with this oldb_trc.txt file?
    Allen

  • Messages window does not pop up when a chat is received

    Help!
    In the Messages app, when a chat is received, the Messages window does not pop up!  (Like it did with the old ichat.)  When a chat is received, it makes the noise, the icon bounces in the dock, and a red bubble is on the icon with the number of new chats.... but the messages window does not come forward.  This is the most frustrating thing ever!  I've been missing so many chats because I'm not staring at my dock.  How do I make the messages window pop up when a chat is received??  Please help!! 
    (I just upgraded from Lion to Mountain Lion...lost ichat, gained the Messages app, and this issue is driving me nuts!) 

    Hi,
    I am not sure you can.
    By Default  iChat could "Hide" any window such as a Buddy list.
    A new Invite put up a Invite window first that you had to Accept (Or set Auto Accept).
    This triggered the appearance of the Chat window.
    This does not happen in Messages.
    There is not Invite window now to any Form of Text chat invite.
    As a consequence there is no Trigger for the Chat window.
    Add to that the Messages main Window is an interface window as well as the Chat window.
    This puts it in the same category as  Buddy List which has to be called back (unhidden) into view with either Keystrokes or the Window Menu.
    A click (or possibly two to first bring Messages to the Front) on the DOCK icon also tends to reveal the Messages window.
    You can set the Messages > Preferences > Alerts for New Messages and Text Chat invitation to Bounce the DOCK and Play sounds to help.
    10:48 PM      Saturday; April 20, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • My user name does not show in finder

    I recently had to do a re-install of OS X Yosemite on my brand new Macbook Pro due to some files being corrupt during the transfer of my aperture and iTunes librarys from my old iMac to the new Macbook. (Aperture appears to be the problem)
    After the re-install everything appeared as a new computer. After signing in to my accounts, I went to "Finder" to open my username and music file to transfer my iTunes library over.  My user name does not appear at all in the Finder sidebar. Have doing something wrong here.

    You can customize your Finder sidebar to show whatever you want. Some of the defaults (including the home folder you're talking about) are available by going to Finder menu - Preferences - Sidebar. You can add others by dragging them from the right side of the Finder window into the sidebar.
    Matt

  • SCSFileDownloadServlet fails: User 'guest' does not have sufficient priv.

    Hi,
    We have an ADF application that is using SCSFileDownloadServlet to get documents from UCM. We added the servlet in web.xml and we are using this link to download the documents: /getfile?adapterName=our_adapter_name&dDocName=document12345&dID=12345
    The issue is that sometimes it works but sometimes it fails throwing this message in the logs:
    Event generated by user 'guest' at host 'CIS'. Unable to download 'COR-ER-421722'. User 'guest' does not have sufficient privileges. [ Details ]
    An error has occurred. The stack trace below shows more information.
    !csUserEventMessage,guest,CIS!$!csUnableToDownload,COR-ER-421722!csUserInsufficientAccess,guest
    intradoc.common.ServiceException: !csUnableToDownload,COR-ER-421722!csUserInsufficientAccess,guest
    *ScriptStack GET_FILE
    3:checkSecurity,dID=421317,dDocName=COR-ER-421722
    at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
    at intradoc.server.Service.buildServiceException(Service.java:2260)
    at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
    at intradoc.server.ServiceSecurityImplementor.validateSecurityPrivilegeLevel(ServiceSecurityImplementor.java:813)
    at intradoc.server.DocumentAccessSecurity.checkSecurity(DocumentAccessSecurity.java:170)
    at intradoc.server.DocumentAccessSecurity.checkSecurity(DocumentAccessSecurity.java:121)
    at intradoc.server.ServiceSecurityImplementor.checkSecurity(ServiceSecurityImplementor.java:371)
    at intradoc.server.Service.checkSecurity(Service.java:2829)
    at intradoc.server.FileService.checkSecurity(FileService.java:337)
    at intradoc.server.Service.checkSecurity(Service.java:2807)
    at sun.reflect.GeneratedMethodAccessor456.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    Is it possible to set a user/password to this servlet so it is able to download the documents everytime?
    Thanks,
    Josue

    Hi go9189,
    According to your description, you come across the error that User 'guest' does not have permission to run DBCC checkprimaryfile. This issue could happen when the login account doesn't have CREATE DATABASE, CREATE ANY DATABASE,
    or ALTER ANY DATABASE permission in SQL Server instance, or that the login account has no access to the mdf and ldf files when attaching database, so SQL Server recognize the login account as a "Guest".
    To solve the issue, you could pay attention to the points below.
    1. Ensure that the login account has at least CREATE DATABASE, CREATE ANY DATABASE, or ALTER ANY DATABASE permission. You could grant the fixed server role 'dbcreator' or 'sysadmin' to the login account following the steps below.
    a. Connect to SQL Server instance with the login account which has sysadmin fix server role.
    b. Expand the folder 'Security', right click the login, and select Properties.
    c. In the Server Roles tab, check the checkbox for 'dbcreator' or 'sysadmin'.
    2. Make sure that the the login account has full control permission on the mdf and ldf files. For how to grant the login account with full control permission on the mdf and ldf files, please refer to the steps in the following article:
    http://msdn.microsoft.com/en-us/library/bb727008.aspx
    There is a similar thread for your reference:
    https://social.technet.microsoft.com/Forums/en-US/e463df4c-8d26-46cf-aa2e-bddd97c7a9b8/user-guest-does-not-have-permission-to-run-dbcc-checkprimaryfile?forum=sqlgetstarted
    Regards,
    Michelle Li

  • Parameter CMS_USER_ID does not exist on this report

    does any one know solution about the problem on reporting user for error message  "Parameter CMS_USER_ID does not exist on this report" ?
    Regards,
    ALi

    Your code always sends 4 line records with each header. Code is not checking if it belongs to same header or not. Please check your code.

Maybe you are looking for