User presets not working after LR5 upgrade

Just updated from LR3 to LR5 and my user presets are not working. They are visible, but do not do anything when clicked. How do I fix this?

We have found the same thing. Patch 5 and 7 did not fix the problem. We even got a preliminary patch 8 that did not fix the problem.
We're still hoping for an EBF.

Similar Messages

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

    My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

    Please let me know , How we can reinstall apple mail ? .
    1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
    2.  After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
             a)Not showing any SMTP connection in TCP trace ,
             b) Connection docter every time Says "Connecting to the server "
    3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
    Please help me .
    Thanks,
    Ranesh..

  • The MSS ECM FPM Steps are not working after the upgrade

    Hi all,
    The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
    On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
    But this functionality was working before the upgrade.
    Please let me know what should I do.
    Thanks,
    Sarayoodharan.K

    clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 -  Cleint should be 000

  • When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

    when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

    there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
    Do a reset
    restore with back up and if required as new

  • TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

    My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix.  I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z.  Any help? Thanks.

    after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
    i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
    so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
    the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
    basically everything is clean now. At least i hope and works fine. touch wood!

  • Why is Time machine backup not working after Mavericks upgrade?

    Why is Time machine backup not working after Mavericks upgrade?

    I had the same problem due to the Fire Wire port.  Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device.  I find it strange that as soon as I installed Mavericks.  The drive does work using USB.  It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

  • Re: Safari 7.0 zoom not working after Mavericks upgrade.

    Re: Safari 7.0 zoom not working after Mavericks upgrade.

    Hey there sarunelis,
    It sounds like after updating to 10.9 the zoom function is not functioning at all. It sounds like you may need to check for 3rd party plugins. This article will help you check for that.
    Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    http://support.apple.com/kb/ts3230
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • FaceTime Camera Not Working After Yosemite Upgrade

    So After I upgraded to Yosemite yesterday, my FaceTime Camera stopped working.
    Every time I turned on FaceTime or Photo Booth, the green light on the camera started to blink like crazy but nothing would show up on the screen. It was just black. And I tried different user too, not working.
    I tried to reinstall Yosemite, no luck.
    Tried to rest SMC and PRAM, no luck.
    Tried safe boot, no camera in safe mode.
    Tried repair disk permission, no luck.
    Here is how it showed in system report, I thought it would be more details?
    I am using MBP with Retina late 2013 model. I am 90% positive that the camera was working before this upgrade.
    I don't know whether anyone else encounter the same problem and I am afraid it's something I installed that's causing the problem. In that case, even a clean install works fine, after I restore everything from Time Machine, the problem might just come back.
    Thanks!
    <Image Edited By Host>

    geoffreysong wrote: ... I am afraid it's something I installed that's causing the problem...
    You have done the right things.  With all you have tried, some third party item you have added is a very good guess as to what could be causing your trouble.  The biggest difficulty will be determining which installation caused the trouble.
    I am certainly not experiencing your problem on any of my 10.10 Macs.
    geoffreysong wrote: ... In that case, even a clean install works fine, after I restore everything from Time Machine, the problem might just come back...
    Right again!  The way to prevent reinstalling the problem (and to prove your guess was correct) is to reinstall OS X using the OS X Yosemite: Erase and reinstall OS X instructions.
    Next, before adding anything else, test your camera using the applicable suggestions from Apple's How to Troubleshoot iSight article.  (Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
      • If the camera works now, your suspicion is correct.  You can then add ONE needed app FROM ITS ORIGINAL SOURCE (not from any of your backups) and test the camera again.  If the camera fails, you have found the problem app.  If the camera works, continue adding apps one at a time, testing thoroughly between each addition.  After all your apps are added back, if your camera continues to work correctly, you can copy your data files back from your latest backup.
      • If the camera doesn't work immediately when nothing has been added to your fresh Mac OS X installation, you most likely have a hardware problem.  There are no user serviceable parts of the camera.  Contact Apple or an Apple-Authorized Service Provider for service.
    Message was edited by: EZ Jim
    Mac OSX 10.10.1

  • Left mouse button does not work after last upgrade on one computer.

    Second request -- left mouse button no longer works after latest upgrade. Uninstalled and reinstalled - did not help. Only affected my office computer. Left button works on other three search engines and other programs -- need suggestions...

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Forms Personalization not working after R12 upgrade

    Hi,
    We have recently upgraded to R12. We have forms personalizations on the People, Enter and Maintain form and this is not working now after the R12 upgrade.
    I went to one of the form personalizations and Validated and Applied again but it still did not work. I also created a new one but had no success with that either.
    Any ideas how to get this working again ? Is there something extra that needs to be done for R12?
    Thanks
    Regards,
    Shalantha

    Pl indicate which version of R12 and on what form you had the personalization in the previous version. Have you checked FND_FORM_CUSTOM_% tables to ensure that the personalization survived the upgrade ?
    Pl see if these MOS Docs can help
    Forms Personalizations Unavailable After Upgrade To 12.1.x          (Doc ID 1245864.1)
    Forms Personalization Not Working After Upgrade To R12.1.3          (Doc ID 1309458.1)
    Form Personalization Value Field Not Being Retained After Upgrade          (Doc ID 1266265.1)
    Do Personalizations Holdup After A Patch Is Applied? (Doc ID 1286576.1)
    HTH
    Srini

  • HT1338 motion 4 will not work after yosemite upgrade

    motion 4 will not work after yosemite upgrade

    To be honest I do not use motion or any other compositing app so i do not miss it personally. However the new Motion is not that expensive, around $60 i think. Still, I understand your frustration.
    I am afraid the more the OS is updated the less compatible certain applications will become.
    Good Luck
    h

  • HDMI not working after W10 upgrade

    Hi, My HDMI stop working after W10 upgrade. It was working fine before on W7 now i get no signal on my Philips 42" TV.The cable tested on another G61 with W7 found working fine Any clue plz. 

    Does your notebook use switchable graphics of any kind?  We might have the same problem: http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Display-Drivers-Windows-10-Cannot-Connect-to-External/td-p/5178882

  • 11.1.1.6.4 Repository variables for DSN and USER do not work after upgrade

    Hi,
    The Repository Variables OLAP_DSN and OLAP_USER no longer work after upgrading to 11.1.1.6.4 i.e they return a connection error when trying to import metadata but the connection is correct if explicitly set without the variable used.
    I have tried the following resolution:
    - From command line execute commands to set variable properties via admintool.exe /command vartext.txt
    Open rpdname user password
    SetProperty "Variable" "OLAP_DSN" Initializer "'ORCL.GLOBAL'"
    Save
    Close
    Exit
    This script works fine as demonstrated by commenting out Save, Close, Exit and running. But it does not resolve the problem.
    The issue is consistent as in the OLAP_USER variable does not work if DNS for connection pool set to ORCL.GLOBAL.
    Is this a bug?
    Thanks in advance
    Edited by: 983325 on 26-Feb-2013 02:35

    There is a 3.1.0.5 client. First thing I would try is the newest client.
    Sent from Cisco Technical Support iPad App

  • Discussion Service is not working after the upgrade to 11.1.1.2

    Hello,
    We have built our custom webcenter application using webcenter framework 11.1.1.1, our application uses out-of-the-box webcenter services like discussions, announcements, and etc. After the upgrade to the new Patch Set 1 (11.1.1.2) the discussion service stopped authenticating the logged in users, however it works for anonymous users.
    We are still in the development phase, therefore all the registrations of webcenter services with our application don't use WS-Security. Please advice and thanks in advance .
    Best regards,
    Hasan

    Please let me know , How we can reinstall apple mail ? .
    1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
    2.  After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
             a)Not showing any SMTP connection in TCP trace ,
             b) Connection docter every time Says "Connecting to the server "
    3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
    Please help me .
    Thanks,
    Ranesh..

Maybe you are looking for

  • IOS 7.0.4 update crashed phone - stuck on iTunes and plug screen

    Attempted to install the latest update and phone just got stuck on a black screen with the iTunes icon and the USB icon underneath.  I have attempted to power off/on countless times.  I have also tried to hold the power and home button down at the sa

  • Content Server UCM 11.1.1.6

    Anyways, I activated the folder_g in UCM 11.1.1.6 and now able to see the Contribution Folder in Jdev content repository connection as well as able to see the my created folder and file in Services ----> Content Tab I click Administration link of my

  • Select count(*) and blank element tags

    Is there a way other than column aliases to produce and return an element tag for the following xsql query. <xsql:query connection="{@cxn}" xmlns:xsql="urn:oracle-xsql"> select count(*) from emp </xsql:query> Some databases such as SQL Server via a J

  • How to find Record creation date

    Hi Friends, Is there any way to find the actual Record creation date for each record in Database tables? Thanks

  • VO Personalization question

    We have a VO that is based on EO. VO selects only specific number of fields. We want to couple of more fields (MessageTextInput) using personalization. We can achive the same by extending VO and adding fields by personalizing I have a doubt here, wil