User Print templates will not hold Print Settings Presets

User print templates set up for different papers will not remember/hold Print Settings Presets

Jeff,
You are correct it does work, I added a step not needed - I created a Preset on the Print Setting page, I should have left that as Default, it works that way. How pleasant to get a response from you, I just watched Camera to Print & Screen #39 Print from Lightroom this morning where I learned about Print templates. Thanks so much.

Similar Messages

Print Queue will not remove print jobs

I am running Windows Server 2008 R2 Standard. I have a Printer HP LaserJet P4015n set up as a network printer thru DNS. The printer is working fine all print job will come
out. Each time I send a print job to stays in the queue with the Status "Sent to printer". If I send another print job to the printer it will print out however the job will stay in the queue. I have added the printer to a user’s machine and they were
able to see all the print jobs in the queue. I have stops and started the spool however it does nothing. I have already reinstalled the printer but it has done nothing to help.
After about 5 - 10min of the jobs are sitting the in the queue they delete themselves.
Does anyone know of anything I can do about this?

Hi,
Thanks for the post.
Here is something I need to confirm:
1. Does this issue occur with other network printers?
2. Does this issue occur when printing a text file?
If this issue just occurs with HP LaserJet P4015n, it is caused by the specific printer driver.
Now please perform the following steps to troubleshoot this issue.
Clear spool file
1. Stop the spooler by doing the following:
a. Click Start , Settings , Control Panel , Administrative Tools , then Services .
b. Scroll down the list of services for the Print Spooler.
c. Right click Print Spooler and click Stop .
2. Delete the spool files
a. Open My Computer.
b. Go to C:\WINDOWS\system32\spool\PRINTERS\ .
c. Delete all of the files inside of this folder.
3. Restart the spooler.
a. Click Start , Settings , Control Panel , Administrative Tools , then Services
b. Scroll down the list of services for the Print Spooler.
c. Right click the Print Spooler and click Start.
Change the spooling format
Set the spooling format to RAW, and then try to print directly to the printer instead of spooling the print job. To do this:
          a.       Click "Start", point to "Settings", and then click "Printers".
          b.       Right-click the printer that you are using, and then click "Properties".
          c.       In the Advanced tab, click "Print Processor".
          d.       Set the default "Data type" to "RAW" for both "WinPrint" and "ModPrint".
          f.        Click "OK", click "OK" again, and then close the Printers dialog box.
Does it work?
Hope this helps.
Miles
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Template will not hold structure

I am trying to create a site template. I get the template the
way I want it using Layout tables and Layout cells. I can apply
text to the template and it looks good. I save the file, test and
everything is fine. I try to apply different data to the template
(this time there is more text) and it moves the navigation section
of my page when I test it. What am I doing wrong?
Thanks!
Tripp

Unfortunately, there's no quick or simple solution other than
to acquire
enough facility with HTML and HTML tables to be able to work
in Standard
View not Layout view.
In my opinion, there are three serious problems with Layout
Mode -
1. Perhaps most importantly, it sits between you and *real*
HTML tables,
and fools you into believing that concepts like "layout cell"
and
"autostretch" really mean something. They do not. As long as
you use
Layout Mode, you'll never learn one of the most important
things for new web
developers - how to build solid and reliable tables.
2. Actually, #1 wouldn't be *so* bad, except that the code
that is written
by Layout Mode is really poor code. For example, a layout
table contains
MANY empty rows of cells. This can contribute to a table's
instability.
In addition, if your initial positioning of the table's cells
is a bit
complex,
Layout Mode will throw in col- and rowspans aplenty as it
merges and splits
cells willy-nillly to achieve the pixel-perfect layout you
have specified.
Again,
this is an extremely poor method for building stable tables,
because it
allows
changes in one tiny cell's shape (i.e, dimensions) to ripple
through the
rest
of the table, usually with unexpected and sometimes
disastrous consequences.
This is one of the primary reasons for the final result's
fragility - read
this -
http://apptools.com/rants/spans.php
3. The UI for Layout Mode is beyond confusing - many options
that you might
want to use are inaccessible, e.g., inserting another table,
or layer onto
the page.
I can understand the new user's desire to use this tool to
make their life
easier,
but the cost is just too heavy in my opinion.
To make good tables, keep it simple. Put a table on the page,
and begin to
load your content. If you would want a different table
layout, instead of
merging or splitting cells, consider stacking tables or
nesting simple
tables instead, respectively.
And above all, do not try to build the whole page with a
single table!
To read more about this approach, visit the DW FAQ link in my
sig, and run
through the table tutorials.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mobjack7" <[email protected]> wrote in
message
news:[email protected]...
> Thanks for the fast response Walt. What would you
recommend as a work
> around for this? I have 2 sites I am currently working
on and need to
> find a solution ASAP.
>
> Thanks!
>
> Tripp

Print window will not open; print preview will not open

I am not able to print or print preview. nothing happens.

I am not able to print or print preview. nothing happens.

Adobe Pdf Converter Print Driver Will not install

Acrobat V9.0
Vista Utimate Service Pack 1
I have not been able to print to the PDF Printer. I get the following error when I select the PDF printer.
"The 'Adobe PDF Converter' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
When I say yes and select version 8.5.0.0 printer since it is the latest version. I get a Add Printer Driver Wizard window that says. "Unable to install adobe pdf converter, Type 3 - User Mode, x86 driver. Access is denied.
I went through all the recommended steps on the web site listed below with no success.
Thanks in advance for you help.!!!!!!!!!!!!!!
Jim
Solution 1: Use a supported installation.
The following are unsupported installations, and the supported solutions:
If you install Acrobat (Professional or Standard) on a 64-bit operating system, then you may
see this error. Please update Acrobat to version 8.1 or later. You can update from within
Acrobat via the help pull-down menu, or download the updater from the following location:
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows.
If you install Acrobat to a shared network disk instead of a local hard disk, then the Adobe PDF
printer is not installed. Install Acrobat on a local hard disk.
TechNote Details
PRODUCTS AFFECTED:
DID THIS RESOLVE
YOUR PROBLEM?
Yes
No
300 characters
Acrobat Professional
Acrobat Standard
Acrobat 3D
TechNote
Home / Support /
Your account o Y Contact United States (Change)
Home Solutions Products Support Communities
Company Downloads Store
Error "Warning 20225..." or no Adobe PDF printer appears (Acrobat 8.0 and Acrobat 3D 8.0 on Windows)
http://kb.adobe.com/selfservice/viewContent.do?externalId=333221&sliceId=1[10/4/2008 2:04:17 PM]
If you install Acrobat to a directory with a path that contains extended ASCII or double-byte
characters, then English installations will display the error message. Install to a path that does
not contain extended ASCII or double-byte characters.
Solution 2: Ensure that the Print Spooler process is running and set to
Automatic, and then repair Acrobat.
1. Select Start > Settings > Control Panel.
2. Double-click Administrative Tools and then double-click Services.
3. Locate the service Print Spooler.
4. If the Startup Type is not Automatic, then set it to Automatic:
a. Right-click the Print Spooler.
b. Choose Properties.
c. Choose the General tab.
d. Choose Automatic in the Startup Type menu.
e. Click OK.
5. If the Print Spooler service is not running, then start it.
a. Right-click the Print Spooler line.
b. Select Start from the menu.
6. Start Acrobat, and choose Help > Detect And Repair.
Solution 3: Ensure that the Print Spooler process has no additional
dependencies.
Only the Remote Procedure Call dependency is required for Print Spooler to operate.
Additional Services can attach to the process but will interfere with restarting the service.
If the Print Spooler process has additional dependencies, then please refer to the steps
below.
To remove all services listed under "This service depends on the following system
components":
1. Choose Start > Settings > Control Panel.
2. Double-click Administrative Tools and then double-click Services.
3. Right-click Print Spooler and choose Properties.
4. Click the Dependencies tab.
5. Record services under "This service depends on the following system components" and click
OK.
Imporatnt: Remote Procedure Call is a system service and should not be removed.
6. Temporarily remove associated programs for the listed services.
7. Contact the service vendor for removal information if removal of associated software does
not remove the service.
8. Start Acrobat, and choose Help > Detect And Repair.
To disable all services listed under "The following system components depend on this
service":
1. Choose Start > Set

I am having similar problems. After years of successful use, about a year ago, my printer (Epson stylus Photo R300) stopped working. After much investigation, it appears my computer no longer recognizes my printer. I've followed resets, safe boots, uninstalls, reinstalls, etc. This happened so long ago, I don't recall what I was doing when it happened. I'm figuring it happened shortly after a Software Update... So far none of the fixes recommended to me have solved the problem. I've been using Epson customer support, but they've stopped responding. None of their suggestions have seemed to work either.

Computer will not send printing to printer.

Computer is HP Pavilion dv6 Notebook PC which is wireless & has Windows 7 OS 64-bit. Printer is HP Officejet 6500 Wireless. Wireless router is Linksys WRT120N. Printer says No computer connection, refer to device documentation to troubleshoot. Printer will copy but computer will not send printing to the printer. I am connected to the internet. Normally when I come home I just click on the printer icon & make it the default printer & I'm all set. However, this year when I got home (winter in another state), it does not work!! The only thing that changed was we had trouble with our cable in the other state, but I thought it was the router, so I made another connection which didn't work either. So the cable technician fixed it for me, taking off the additional networking icons I made in error. So I feel that the problem is in the networking but don't know how to fix it!!! Thanks for your help!!

Hi senior2,
It is hard to say what may have happened that cause the laptop to love connectivity with the printer or the printer lose connectivity with the network.
A links for you:
http://h10032.www1.hp.com/ctg/Manual/c01669504.pdf : Check out page 217 "Solve network problems" and "solve wireless problems". Continue reading through 223.
Some things to try that ma be repeatsof the user guide....honestly not sure if any will help but it will help with next steps I think.
1) Does the printer obtain an IP address. Can you access it through the embedded web server? If the answer is yes, the problem is likely on the PC. If connected Wireless it should have the wireless LED On.
2) If the printer does not obtain an IP address, double check the settings match your network.
3) Double check your Laptop LAN Is properly configured for your.
Hope this helps. If not, post back and let us know what you tried.
Kaz
Kazman
I am an HP Employee
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

ICal print menu will not come up

I have been trying to print my iCal calendar from my PowerBook G4, but the print menu will not come up. I have printed it from here before, so where did the print menu go? Help!

We have exactly the same problem here:
OS 10.4.3, iCal 2.0.3, HP Photosmart 2610
- Printing on any app works fine, ecept iCal
- in iCal choosing the command "print..." just does nothing.
I tried:
- creating a new user - > printing in iCal works fine!
so I tried:
- trashing ...
... all ical-plists in "user/Library/Preferences/"
... the folder "user/Library/Application Support/iCal"
... moving all user-pref files out of the preferences folder
... disabling all the fonts in "users/Library/Fonts/" and "hd/Library/Fonts"
no way the get it back to print!
I'm sure it has nothing to do with the HP printer, cause on a different account it works.
Any ideas what else I could disable?
Thanks for ideas
Thierry

When I click "Buy Now" in iPhoto's book I get the following message: Your book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue?"

When I click "Buy Now" in iPhoto's book I get the following message: "Your book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue?"
How do I proceed? How do I identify which is "default text?"

What version of iPhoto are you using?
Go thru each page, check the layout to see if there's a text box included on the page and make sure there is text in that text box. If not it may show the "holding" text like this:
If you don't want to change the page layout to one that only has photos and no text boxes just select that holding text and put a space in its place.
OT

When I click Buy Book this appears our book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue? will the text I have sellected still be ok or will the book have missing text help Pleas?

I just spent 3 days creating a book [32 pages], with photos and text but when I click Buy Book In iPhoto this appears>
Our book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue?
My question is will the text I have sellected to use still be ok, am I safe to continue and buy or will the book have missing text ?
The book is for special birtday in 2 weeks time Please Help.G
<Email Edited by Host>

Yes, you're safe to continue. That means that there are text boxes that you did not put any text into and they contain the holding text which will not be printed. That text is shown in a light grayt and is in Latin. Normally you can just put a space in the text box to replace the holding text so as not to get that warning message.
Before ordering the book proof the book according to this Apple document: iPhoto, Aperture: Previewing an order in iPhoto or Aperture. Check the pdf file for any missing text or photos and any warning indicators in the text boxes indicating that some of the text has exceeded the space allotted in the text box.
Keep the pdf file to compare with the printed copy when you reciive it.
OT

HT1338 my Epson R3000 will not load printer paper

Hi, my Epson R3000 will not load printing paper and say's there is communication error, has any one had this problem? , thanks

Yes, 90% of the time I try to print something I get that error, and have been gettign that error for years, since the days of OS X Leopard. I have been pausing/resuming each printer to get it to start transferring files again, or, sometimes it won't work and I have to go through the wifi setup again, or unplug cat5 cable and plug it back in, or power cycle the printer if on USB.
I contacted Epson, and as you most likely know, they have no qualified personnel. They got me throuhg the obvious steps like removing the drivers, re-installing them (I actually did a find / -name "*epson*" and removed everything I found), rebooting the router (poor thing has nothing to do with it, it's working fine otherwise), swapping cat5 cables, usb cables.
I have 3 of these R3000 printers and they all exhibit the same issues. All of my other printers connected to the same computer/router/wifi do not exhibit this issue. I have Artisan 50 (usb), the 1400 (usb), and 3 Artisan 835s (wifi).
The things I hate most about Epson and its printers are the following:
- they come with 0 support form Epson. If you know what find . -name is, you're already more qualified than any CS rep that's going to answer
- their drivers get updates very slowly for the OS X platform at least
- only some older printers will how you # printed pages/ # pages remaining. The R3000 for example shows "spooling job, 3% complete". Very informative.
- the printer driver for the R3000 creates some kind of proxy files that are HUGE in size, and it's done every time, for each page. It effectively takes 10 minutes to start printing 60 copies of 300DPI letter size photoshop designed files. The printer definitely doesn't have 5GB of RAM or temporary space to hold all that, so why not START FREAKING PRINTING while that stuff goes on in the background for subsequent pages? And if it's the same exact graphic, why doesn't the computer just simply send the first generated proxy file 60 times in a row rather than create 60 different proxy files?
- all Epson printers I've ever played with will stop printing mid page when it thinks it's out of ink. This determination is done in the chip of the cartridge in combination with the printer firmware, not by actual reading of the ink levels. I would much prefer that the printer would continue to print that page and stop after. Less wasted paper, and the cartridges I throw out ALWAYS have enough ink in them to finish printing one silly page.
- print quality doesn't change until you spend $500 or more on a printer (print heads are virtually the same type/size on all of Artisan printers for example), ignoring, of course, dye ink vs pigment ink
- did I mention no qualified customer service personnel and complete disinterest in taking any customer feedback into consideration?
In conclusion, I am very sorry to let you know that I have yet to find a solution to this, and Epson has been ignoring it for years. If you do bump into something worthwhile though, please post it here.
Thank you!

HP Photosmart Premium C310a printer that will NOT print in BLACK. It will print in color.

I have a Photosmart Premium C310 a printer that will NOT print in BLACK. I tried the unplugging the cord and holding # and 3 and it did not work for me. I, at first, purchased a new cartridge thinking it had run out of ink.........so now I am out $25.00.
Any other suggestions. It does print in color. HELP! HELP! The printer is not even 5 months old.

Can I ask are you based in the US?
Thanks, Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Print job will not delete

A print job will not delete from my computer despite several restarts of both the computer and printer.

Hi,
From the Desktop, hold down the Windows key and press R. Into the Run window, type services.msc and hit enter.
Browse down to the print spooler service, right click it and select Properties then click on the Stop button.
Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the document has been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Print screen will not appear app crashes

print screen will not appear on any app and the given application that I am trying to print from crashes. but I can see thye printer in the setup utility tried resetinmg the utility that did not help any suggestions.

Hello and Welcome to Apple Discussions...
Try booting from your install disk and run Disk Utility.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window where you see Capacity and Available. Make sure there is always 10% free disk space. Not enough disk space can cause directory corruption.
Carolyn
Message was edited by: Carolyn Samit

I ordered a photobook, when I went to purchase it flashed up a warning about default text saying 'printed books will not include this text'. Really dissapointed, my photo book arrived with the default text printed. Will I have to return it?

I ordered a photobook, when I went to purchase it flashed up a warning about default text saying 'printed books will not include this text'.
Was really dissapointed when my photo book arrived with the default text printed. Will I have to return it? Or can I get some sort of discount? I don't live near a post office so I'd rather not have to return it.

Contact Apple support - they can answer that type of questions - we are just users here like yourself
BTW - it is best not to order when you have errors - to resolve that error place a single space in the subject text box
and always
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

Cancelled print but will not cancel and comes back on to print same job

cancelled print but will not cancel and comes back on to print same job on on hp deskjet all in one

Hi,
From the Control Panel, open Administrative Tools and select Sevices. Browse down to the print spooler service, right click it and select Properties then click on the Stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the job has been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

User Print templates will not hold Print Settings Presets

Similar Messages

Maybe you are looking for