User Profile Data for One Month in ST03N

Dear All,
I have one question for a similar requirement.
I want to see the User Profile data for last month (e.g.August)
I navigate through the same path as described by you.
ST03N- Expert Mode- Total (select period)-- User Profile (from analysis view)
even though I have selected One month period (August) ; I could see only the data for one week (1st August to 7th August)
Can you please advice how can I solve my purpose, if not this time but may be in future I should be able to see complete one month data.
Thanks in advance.
Best Regards,
Jayesh

Dear Shailesh,
Thanks for the very prompt and accurate response.
However we have this job scheduled on monthly basis in our productive system, still there is no data avaialable.
Kindly advice.
Best Regards,
Jayesh

Similar Messages

How to store call log data for one month?

HI,
I am using iPhone 4S with iOS 7.1.2. I would like to know that is there any setting for storing call log data for latest one month..?

That's not how it works. Recents is limited to exactly 100 calls, not a time frame. If you need your call history for a specific time frame, look on your carrier's website. Most carriers will permit you to login to your account & view call history.

Just prepaid 4G-data for one month?

Hi - maybe someone can help me... I will travel along the West Coast with my family in August. I am thinking about buying a mobile LTE hotspot to connect all our devices to the internet to keep connected with Europe via WhatsApp, Facebook etc. The Verizon Network seems to have the best coverage in the area we are travelling. Any suggestions which data plan I should prefer? Estimated data transfer is 3GB for 3 weeks. We do not really need Text or Talk (but would be nice to have when included anyway) Looking forward to hearing from you!

If you are looking for temporary access while traveling then prepaid Jetpacks are the way to go. Regarding the pre-paid plans you will have to talk to a VZW rep and review what is available. Its great that you can estimate 3GB of usage for all devices while you are on your trip. Just be sure you stay on top of your usage while you travel so you do not run over your limit too early. Check your data frequently and remember to power down your Jetpack when you are done using it to close up any leaking data applications.
The generic Verizon contact info can be found here:
http://www.verizonwireless.com/wcms/contact-us.html
I know pre-paid has its own department so you will have to make your way over to those folks to plan everything in advance. They have a direct number but it escapes me at the moment. The general phone number is 1800-922-0204. Since you are a new customer you will have to request a sales rep and then get transferred over to Prepaid.

Calendar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date.

Calenndar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date month. How do I do this with the new operating system?

Adding to Alan's answer:
One of the problems that comes with these tricks for variable-rate acquisition is being able to match up sample data with the time that it was sampled.
If you weren't using either of E-series board's counters, there is a nifty solution to this! You'll be using 1 of the counters to generate the variable-rate sampling clock. You can then use the 2nd counter to perform a buffered period measurement on the output of the 1st counter. This gives you a hw-timed measurement of every sampling interval. You would need to keep track of a cumulative sum of these periods to generate a hw-accurate timestamp value for each sample.
Note: the very first buffered period measurement is the time from starting the 2nd counter until the first active edge from the 1st. For your app, you should ignore it.
-Kevin P.

RENEW SKYPE NUMBER FOR ONE MONTH

MY NUMBER EXPIRED BUT I ONLYHAVE 16 DOLLARS IN THE BANK AND 6 DOLLARS SKYPE CREDIT CAN I RENEW MY SKYPE NUMBER FOR ONE MONTH FOR NOW?

You could always allocate a number to multiple business accounts in Skype Manager. Then re-direct the number via IP-PBX to go to different extensions.
Try the following here [If you look in the advanced section of this manual, you'll see an example of two accounts using one number]
http://download.skype.com/share/business/guides/skype-connect-user-guide.pdf
7.5 Online Numbers for incoming calls
You can use both business Skype accounts and Online Numbers simultaneously on a
single SIP Profile if you wish. In other words, you may have multiple business accounts
and Online Numbers added to one SIP Profile at the same time.
7.5.1 Adding an Online Number to your SIP Profile
Shows you how to setup such
Thanks,
Kent C.

I'm really sorry i just bay my griAddress again to my phone please grindar extra just for one month and you charge me for one year so i would like to cancel that transaction and pay only monthly many thanks marcel

I'm really sorry i just bay my griAddress again to my phone please grindar extra just for one month and you charge me for one year so i would like to cancel that transaction and pay only monthly many thanks marcel

These are user forums. You are not speaking to Apple. We can't assist you. You must contact Apple directly in your country.
Customer Service: Contacting Apple for support and service - this includes international calling numbers.

What Are The Minimum Permissions In Order An User To Be Able To Access User Profile Data With JavaScript And REST API

The question says it all:
What Are The Minimum Permissions In Order An User To Be Able To Access User Profile Data With JavaScript And REST API.?
In the User Profile -> Permissions there is only the option for "Full Control".

Hi Nikolay,
Thanks for posting your issue, you need to set permissions on User Profiles = Read. Kindly find the below mentioned URLs to get the code and more details on this.
http://www.vrdmn.com/2013/02/sharepoint-2013-working-with-user.html
http://www.vrdmn.com/2013/07/sharepoint-2013-get-userprofile.html
http://sharepoint.stackexchange.com/questions/61714/sharepoint-2013-call-the-rest-api-from-sharepoint-hosted-app
http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2013/04/09/how-to-query-sharepoint-2013-using-rest-and-javascript.aspx
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Disobey the user profile date setting in module pool

Hi all,
I am working on a module pool. I have a request to disobey the user profile date setting dd/mm/yyyy to user requested date format dd-mm-yyyy.
I understand that it can easily be done in SAPScript with command SET DATE MAST dd-mm-yyyy, but how to do it in module pool?
Thanks in advance.

Hi, Wong.
Follow the Steps Bellow
--> Copy Search Help BU_DATE_CHAR to ZBU_DATE_CHAR using T-Code SE11
--> Copy FM BUS_TOOLS_DATE_CHAR_EXIT to Z_BUS_TOOLS_DATE_CHAR_EXIT using T-Code SE37
--> Open ZBU_DATE_CHAR in Change mode and add Z_ in the Start of Search help exit FM as we have copy new
--> Active ZBU_DATE_CHAR it will not give you any Error message may be one Warning message but Ignore this.
--> Active Z_BUS_TOOLS_DATE_CHAR_EXIT my will give you error message do the following Change
in Changing Tab SHIP type SHLP_DESCR " Change the Previous type with this one.
in Tables Tab SHLP_TAB type SHLP_DESCT " Change the Previous type with this one.-->
--> After doing above changes.
--> Add the following line of Code on line number 92 just before the line APPEND record_tab.
REPLACE ALL OCCURRENCES OF '.' in record_tab-string WITH '-'.
--> Activate both Search Help and FM
now in the Search help filed in Module Pool you where using BU_DATE_CHAR use ZBU_DATE_CHAR
I did the above way and it is working fine this way now When i Press F4 and select some date it show in the Field like 01-01-2009 Previously it was showing me 01.01.2009
Please Reply if any problem,
Best Regards,
Faisal

HT4098 i paid 14.99 usd for one month but i get only one month how can i acces again

hai
ipaid for yalo 14.99usd thats for one month unlimited freecall but now only 10 days my account is suspended
why my account has suspended?

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple, we won't know.
Do you mean that you iTunes account is disabled ? If you do then you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'. You might then need to log out and back into your account on your phone.
Or that your account with that app is 'suspended' ? If you do then have you contacted the app's developer ?

How should restrict data for particular month?

Hi Experts,
How should retrieve data for particular month without where condition.

Hi,
You must be having Month Object right in your Webi?
User will be given opportunity to Select his/her required [Month]
Create variable as =Userresponse("Enter value for Month")same text as you are giving in the Prompt text....Name it as [UMonth]
Go to analysis tab..Filter..Add filter...[Month]=[UMonth]
always this report will run for the month user require

Have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?

have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?

Hello mlazaretti. Vacation time is awesome. (Especially a road trip!) Since you will be going out for two weeks, you never know if having extra data may come in handy. I highly recommend switching to the next tier up so this way you have more data. This way it is only $10.00 more versus $15.00, and you dont have to worry about overages. Then change back at the start of the next billing cycle.
If you need help making this change let us know! Have a safe trip!
NicandroN_VZW
Follow us on twitter @VZWSupport

P2415Q - No display over DVI, HDMI. No menu. Worked perfectly for one month over display port

Reason Line: Dell P2415Q. After one month working perfectly over display port, no display on screen over Display Port or HDMI, no response to menu buttons, backlight and power LED on but no image on screen.
Problem Description
The monitor worked out of the box for one month using the display port to mini display port cable provided with the monitor, which was plugged into my XFX 7970 and 7950 graphics cards. It supported 4K at 60Hz and was exceptional for photos, videos and games. On Wednesday the monitor stopped working, no image or menu is displayed on the monitor. I plugged in my old monitor to help diagnose via DVI from the same graphics card. When I press the power button on the Dell P2415Q monitor, the power LED lights up and the computer detects the monitor (as shown in the windows screen resolution menu). It sets it as a secondary display but the monitor remains black, I can see the power LED and backlight is on. No power saving mode popup appears on the monitor, when I press the menu buttons there is no response from the screen, it remains black. I repeated with a HDMI cable the same issue occurs with no response or image. I repeated and disabled crossfire (which allows the graphics cards to function independently) and tried the second graphics card with no response. I tested the HDMI cable I used on my old LG monitor, it works well. I have tried connecting a laptop over HDMI to the monitor too, with no response from the monitor. I have exhausted all the tests I can think of, I presume I will have to return the monitor for repair or replacement under warranty. A question to the dell rep and community - is there anything else I can try / do to get it working?
Monitor / Computer Details
Monitor service tag: <removed>
Computer: Non-Dell, self build about 2 years ago. Ivy Bridge i5, Gigabyte Sniper Motherboard, 16GB RAM, XFX 7970 GPU and XFGX 7950 GPU in crossfire, 256GB SSD, 860W Corsair AX power supply (860W on 12V rails). Windows 7, 64-bit. (Secondary Monitor LG D2342).
Operating System: Windows 7, 64 Bit.
Video Card: XFX 7970 and XFX 7950 in Crossfire (tested separately, monitor produces fault with both).
Video Card Driver: 14.12 AMD Catalyst Driver (rolled back to older driver, monitor still produces fault).
Video Card Output Ports: Tested with miniDP and HDMI on both cards, with crossfire enabled and disabled. Monitor still produces fault.
Video Card Cable: miniDP to DP cable provided with monitor. HDMI cable, tested with alternate monitor to confirm it functions correctly.
Monitor Menu Button: Non responsive, when power is turned on the computer successfully detects the Dell P2415Q monitor, the backlight turns on but no image appear on the screen. Pressing the menu buttons yields no result - menu does not appear on the screen. Power LED is on.
Monitor Purchase: Purchased from Overclockers.co.uk March 2015.

* Turn the monitor off
* Disconnect all cables from the monitor including the power cable
* Press the monitor power button in for 15 seconds
* Reconnect the monitor cables and re-test. If still no go, your only option is to get it exchanged per the purchased warranty
* But first the service tag must be transferred into your name using this form

I plan to loan my iPod Touch to a friend for one month to use in Europe. How can I keep my iTunes account private, but enable him to create his own iTunes account to use on my iPod Touch?

I plan to loan my iPod Touch to a friend here in the USA for one month to use on his trip to Europe. How can I keep my iTunes content and my account private, but enable him to create his own iTunes account to use on my iPod Touch? Also, do I need to de-register my iPod Touch for all of this to happen--and have him register my iPod Touch in his name for that month he is using it in Europe?

very_nice wrote:
The suggested advice in this support article http://support.apple.com/kb/HT1478 wasn't a help at all, because the option "enable disc use" in the summary window of itunes doesn't appear.
*From the article*:
Products Affected
iTunes 7 for Mac, iTunes 7 for Windows, iPod nano, iPod shuffle, iPod mini, iPod, iTunes 8 for >Windows, iTunes 8 for Mac
No mention of the Touch, it works differently from other iPods and has no "disk mode" as such.
I think it can be used as a storage device by using a 3rd party App, search the the App Store for such items.
Photos transferred to your Touch via iTunes will be of severely compromised quality i.e 640x480 pixel resolution and file size around 600-700 kb. These can be retrieved, again using a 3rd party application on your computer, such as [Touch Copy|http://www.wideanglesoftware.com/touchcopy> but you will not get back original quality images.
Good luck,
Dud.

The Ipad2 Application Data folder is taking up huge space in C: Drive. How can I shift the User Application data for iPad2 to another Drive?

The Ipad2 Application Data folder is taking up huge space in C: Drive. How can I shift the User Application data for iPad2 to another Drive?

Thanks a lot for the response. Yes, I am checking my C: drive data thoroughly now, including the hidden folders, to ascertain if something else can be moved, as per your suggestion.

How to populate date & time when user enter data for custom table in sm30

Can anyone tell me How to populate system date & time when user enter data for custom table in sm30..
Req is
i have custom table and using sm30 user can enter data.
after saving date i want to update date & time in table
Pls let me know where to write the code?
Thanks in Advance

You have to write the code in EVENT 01 in SE54 transaction. Go to SE54, enter your Ztable name and in the menu 'Environment-->Events'. Press 'ENTER' to go past the popup message. In the next screen, click on 'New Entries'. In the first column, enter 01 and in the next column give some name for your routine(say UPDATE_USER_DATE_TIME). Then click on the souce code icon that appears in blue at the end of the row. In the code, you need logic like below.
FORM update_user_date_time.
DATA: f_index LIKE sy-tabix.
DATA: BEGIN OF l_total.
          INCLUDE STRUCTURE zztable.
INCLUDE STRUCTURE vimtbflags.
DATA END OF l_total.
DATA: s_record TYPE zztable.
LOOP AT total INTO l_total.
    IF l_total-vim_action = aendern OR
       l_total-vim_action = neuer_eintrag.
      MOVE-CORRESPONDING l_total TO s_record.
      s_record-zz_user = sy-uname.
      s_record-zz_date = sy-datum.
      s_record-zz_time = sy-uzeit.
      READ TABLE extract WITH KEY l_total.
      IF sy-subrc EQ 0.
        f_index = sy-tabix.
      ELSE.
        CLEAR f_index.
      ENDIF.
      MOVE-CORRESPONDING s_record TO l_total.
      MODIFY total FROM l_total.
      CHECK f_index GT 0.
      MODIFY extract INDEX f_index FROM l_total.
    ENDIF.
ENDLOOP.
ENDFORM.                    " UPDATE_USER_DATE_TIME
Here ZZTABLE is the Z table and ZZ_USER, ZZ_DATE, and ZZ_TIME are the fields that are updated.

User Profile Data for One Month in ST03N

Similar Messages

Maybe you are looking for