User Profile Disks with Windows Server 2012 and Windows 8 VDI

Hello experts!
We are building a new server setup for the office and are unable to figure out why UPD will not work. We have VDI setup and a user for instance
connecting through the RDWeb workplace will dynamically get one of the available Windows 8 Machines delivered through Hyper-V and can successfully login on this machine via Active Directory. So far so good...
However, when we activate the User Profile Disks "UPD" feature the login takes forever and the VHDX will not mount on c:\users\...
as expected within the virtual Windows 8 machine.
The UPD config is quite simple, with just the path "\\vmhost\upd\" set. This share has (now during test) full access for everyone,
both on share level and on security level, but still the VHDX will not mount.
The UVHD-template.vhdx file gets created just fine when UPD is activated, and during login through RDWeb a TEMP-UVHD-S-1-5-21-1477358240-4159876597-995667825-500.vhdx
gets created, but there it stops... The login process takes a couple of minutes by the "Windows förbereds" (roughly translated to English "Preparing Windows"), and then the user gets logged in with a temporary profile.
- The event log says (translated using Google translate):
Failed to obtain a user profile disk for the user account with SID S-1-5-21-1477358240-4159876597-995667825-500.
Make sure the location of the user profile desk can be reached, the server's computer account has read and write permissions to the site and that there is a template file for user profile disks at the site.
Name of the virtual desk"font-size:14px;font-family:'Droid Serif', Georgia, 'Times New Roman', serif;color:#222222;line-height:23px;"
/>HRESULT: 0x8007007B.0
Please help, it should not be that hard to achieve this.

Hi,
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous steps should be helpful for many
similar scenarios.
If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to follow it up. You can also choose to unmark the answer
as you wish.
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Is there a 32 Bit edition available for windows server 2012 and windows server 2008

Dear All,
Is there a 32 Bit edition available for windows server 2012 and windows server 2008?
Regards,
Ahmed

Hi,
Quote：
All editions of Windows Server 2008 R2 are 64-bit only.
Reference link below(session Supported upgrade paths):
https://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
And based on MS official description about system requirement for Windows Server 2012/2012 R2, we may find out that they only has 64 bit OS.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows server 2012 and windows 7 direct access

I am looking for some decent documentation on how to get direct access in windows 2012 to work with windows 7
Can anyone point me the right direction?

Hi, I got success through this
http://syscomlab.blog.com/2012/09/how-to-get-windows-7-to-work-with-directaccess-server-2012/ and this one
http://syscomlab.blog.com/2012/09/directaccess-for-windows-server-2012-guide/ but I'm using NLS in a dedicated server (what is fine for me) but the Win7 client doesn't connect to DA (EDGE server) through internet. I'm using a LAB where WS2012 host acts
as a GATEWAY (using NAT) and for Windows 8 client is working fine but when I try using win7 clients it just doesn't work :(
Server WS 2012 RTM full patched + Win8 Enterprise RTM full patched + Win7 Enterprise RTM ful patched (including the recommended KBs for DA solution)
regards,
Thiago
Thiago Beier Se foi útil marca como resposta! Don´t forget to mark as answer!

Resizing User Profile Disks in Existing Server 2012 R2 RDS Deployment Question

Once the initial maximum size is set and the VHDXs have been created in a Server 2012 R2 RDS deployment, will attempting to increase Collection's maximum UPD size by say.. issuing a Powershell command of:
Set-RDSessionCollectionConfiguration -CollectionName MySpiffyNewCollection -MaxUserProfileDiskSizeGB 10
over-write the existing VHDXs instead of simply increasing their size? (max size is currently 5GB)
I'm not at a point where I can test this in a lab condition to find out, and I have not found this question asked (or at least not definitively answered) in this forum yet.
-G

Hi,
Thank you for posting in Windows Server Forum.
We can resize the UPD file with below command:
Resize-VHD –Path c:\BaseVHDX.vhdx –SizeBytes 1TB
After running this mount the .vhdx file and open disk manager and there will be unallocated disk, and then you can click extend disk/volume and its done.
You can refer following article for more information.
Resize User Profile Disks
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Windows server 2012 and windows xp remote desktop connection loss

I am having this problem for a month now, and i am stumped with trying to find an answer . I have talked with several network admins in my area and with no luck i have not found a solution. I have a windows server 2012 placed with 5 pcs that are connected
on a local network , those 5 pc's connect to the server via remote desktop. List of pc's:
1x Windows 7
4x Windows XP SP3
All have the latests network drivers, all have the latest version of remote desktop installed. All have been scanned for viruses. All have antivirus software.
Problem is the 4 XP machines lose connection on when connected via remote desktop. If one starts losing connection the other 3 start to lose the connection aswell. The windows 7 machine is not affected by this it works fine.
What have I tried:
Scanning for viruses.
Disabling Firewall and antivirus software.
Updating all drivers.
Did many changes to group policy like keepalives etc.
Turning off SMBv2 SMBv3.
Turning off network adapter Offload settings.
Changed some registry settings like keepalive, smb etc.
Updating every pc and server with all windows updates.
Changed the router and switch.
Port forwarded needed ports like 3389.
Updating remote desktop to 7.0.
I might be forgetting some stuff i will add as i remember anything.
So the thing is this. I use a Windows XP machine from my office I remotely connect to the server via the Internet and I DO NOT experience any connection loss. BUT the XP machines on the local network constantly experience connection loss via remote desktop.
I pinged every Machine from the server via CMD command PING. So when they lose connection the Packets get time outs . Packets get dropped between 1-10 packets when a connection is lost. This packet drop does not occur when using the internet or anything else.
ONLY when connected to the server via remote desktop. The packets get dropped at random intervals.
Problem is I use an XP machine and I am not experiencing any loss of connection , while the XP machines on the local network experience it , but not the windows 7 machine.
Router is ASUS RT-N53 , and switch is Dlink DES-1008D. Server is a Dell PowerEdge T110 II.
Can someone please tell me what can i do to solve this problem?

So today got some word from their office. They were using RDP from 8AM until 12PM all was working fine. Then got back after lunch about 1PM and got a few connection lost errors when they tried using RDP again. Its weird since they didn't have disconnects
in the morning, and started having them after lunch.
Also noticed, that two pc were not using RDP and were disconnected as shown in task manager. And they still got request timeouts.
Maybe this is not a remote desktop issue?
TASK MANAGER
The 2 disconnected pc's ping screens:

Error in South Africa Regional Settings in Windows Server 2012 and Windows 8

Please note that the format for numbers in South Africa regional settings is incorrect. I discovered this through on of our products that would not work on Server 2012, but works from XP to Windows 7.
Where the decimal was always a point it has now been changed to a comma, which is incorrect and most likely will cause a lot of issues for customers in south africa that use decimal data.
I can already see spatial data breaking where decimals are used and stored with points and not commas.
To reproduce this error set your regional settings to South Africa and execute the following code in C#
System.Convert.ToDouble("10.1234");
This will throw a FormatException. Change regional settings from a , to a . and there we go it works.

It seems that this is development related issue, please try to submit a new post in DEV forum. Thanks.
Thanks
Zero
Respectfully Mr. Xia, it looks like the OP is reporting a localization issue, not a development issue.
For the OP, there's a
well researched post by a South African developer describing that the decimal comma is the correct choice. The work cites University style guides, International conference agreements, and government legislation and regulation.
An excerpt from Mr. MacLean's post, quoting work from EEPublishers:
English-speaking countries (plus China, India and Japan) use the decimal point. There seems to be a general tendency to formally declare its use worldwide and the International Organisation for Standardization, ISO, also tends towards using the decimal point
over the decimal comma. In view
of the South African law, however, the comma shall still be employed in South Africa as “the only recognised decimal indicator for all numbers” [3].
References
[1] DR Hendrikz: South African Units of Length and Area, Department of Lands, Trigonometrical Survey, Special Publication No. 2, 1944.
[2] Measuring Units and National Measuring Standards Act, 1973 (Act No. 76 of 1973), Government Gazette No. 4326, 5 July 1974.
[3] The International Metric System (SI), Guide to the use of the SI in South Africa, The Council of the South African Bureau of Standards, M 33a, 1992
[4] Measurement Units and Measurement Standards Act, 2006 (Act No. 18 of 2006), Government Gazette No. 29752, 28 March 2007.
[5] T Zakiewicz: “Units of Length Measure & Geodetic Standards at the Cape, 1813-1912”, History of Surveying and Land Tenure, Collected Papers,
Vol. 2, The Institute of Professional Land Surveyors & Geomaticians of the Western Cape, May 2004.

Server 2008 R2 with WSUS need to specify location for Feature install for Server 2012 and Windows 8

Having a problem where we need to add .net 3.5, amongst other things, in server 2012 and windows 8.1. We're using WSUS on server 2008 R2, so when I go to add roles or features, I'm not able to as it tries to use Windows Update but it's set to use WSUS.
I'm aware in server 2012 gpo's that you enable the policy 'specify settings for optional component installation and component repair' in Administrative Templates>System, however that setting is not available in Server 2008 R2.
I've downloaded the templates from http://www.microsoft.com/en-us/download/details.aspx?id=36991 but the setting is still not there.
Any suggestions on how to do this/allow feature install with Server 2008 R2?

Hi,
To upgrade the Administrative Templates, please run the downloaded msi file, then copy the needed admx files and adml files to the PolicyDefinitions folder.
For detailed information, please refer to the link below,
Managing Group Policy ADMX Files Step-by-Step Guide
http://technet.microsoft.com/en-us/library/cc709647(v=WS.10).aspx
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

It is compatible Obi 11g with Windows Server 2012 and Sql Server 2012?

Hi every
Please help with two questions.
1. - Obi 11g is supported on Windows Server 2012 and SQL Server 2012?
There a compatibility matrix which mention compatibility with versions 2012?
2. - is feasible to install Obi 11g in separate server and install weblogic on another server?
I appreciate the prompt response
Regards
Pedro

Hi Pedro,
As of November 2012 Compatibility Matrix released by Oracle for OBI 11.1.1.x Windows 2012 and SQL Server 2012 were not supported. It was supported on 2008 Windows and SQL Server.
We can have weblogic and OBI server's on 2 different machines. The approach is to opt software only install. the link below will give more details:
http://obieeelegant.blogspot.com/2012/07/obiee111160-software-only-installation.html
Let me know if this helped.
Regards,
Jay

Unable to Enable User Profile Disks in RDP server 2012R2

I am setting up a new Windows server that will act as an RDP server. The server has been built with Windows Server 2012R2.
I have the following roles and services working on the server: RD Web Access, RD Gateway, RD Licencing (with 30 user cal licences), the RD Connection broker, and the RD session host.
I have a SSL certificate configured and installed on the site, and both external and internal DNS are configured and working.
I have created and published an application collection and this is working. That is, when you go to https://remote.<servername>.org you are presented with a log in screen, users can log in with their domain accounts and then can connect to the published
applications, this is working both on our internal network and from the general internet.
So all the roles on the server are working and the collection itself is also working. However, what I cannot do is set it up so that we can use user profile disks with that collection. When I go through the Session Collection Wizard and I get to "User
Profile Disks" I can click on "Enable user profile disks" and then you can enter the options below.
I am entering the share location under location \\<servername>\<sharename>
I am using the default "store all user settings and data on the user profile disk"
Then I go to create the profile disks and I get the following error:
"Could not create the template VHD. Error Message: -2147024809
This has happened multiple times, I have done the following:
- installed all windows updates and rebooted the server, same error
- checked the share permissions AND the folder permission for that share, for testing purposes I have set permissions on both the folder and the share to allow full control to "everyone" (I also tried it with only "domain users") but
same error message.
- I have checked to see that no quotas are imposed on the disk where I am attempting to create the profile disks - this was because this was the closest thing I could find on Technet was this post:
https://social.technet.microsoft.com/Forums/windowsserver/ru-RU/aec30527-d742-42b9-950e-85c709c4cb45/vdi-problem-creating-user-profile-disks?forum=winserverhyperv
And that was a quota issue that I am not having.
The UPD wizard says the following "the servers in the collection must have full control permission on the user profile disk share and the current user must be a member of the local Administrators group on that server"
Both of those things are true.
I have attempted to search for that specific error message (-2147024809) and have found nothing on Technet or any other site.
I am hoping someone here has some thoughts. Thanks in advance.

I was looking at both the technet article for setting up UPD as well as this walk-through:
http://thewolfblog.com/2014/02/24/user-profile-disks-for-rds-2012-2012-r2/
The step after the creation of the disk in this walk-through is to look at who has permission on the .vhdx file, now obviously I am not at that step, but that is what led me down the trail of looking at user permissions, hence my attempts to set up shares
where 'everyone' has full permissions on both the share and the folder.
I have tried to set up multiple shares for the collection, I have tried on two different disks (volumes) on the RDP server itself, I also tried setting up a share on our fileserver (which has all kinds of shares working fine) and the same error occurred
in all cases.
I also found this Technet article:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/d6469d31-6540-4075-a85f-a6e8f7c11e89/user-profile-disk-template-cannot-be-created-when-setting-up-session-collection?forum=winserverTS
So that seems close to what I am looking for, but I have checked and the exact group policy that was causing the above linked issue is not defined in our group policies, but maybe there are other group policies that are causing the issue?

MSXML6.dll method"SEND" don't work in Windows Server 2012 and SQL 2008R2

Hi all,
I have a SP to send a WebService data
It works fine on Windows 2008R2 server and also on Windows Server 2003.
moving it on Windows Server 2012 with SQL 2008R2 express (32bit) or SQL 2012 express (32bit), it doesn't work anymore.
Below the SP.
-- =============================================
-- Author: Giancarlo MADA Service 2008
-- Create date: 09/09/2008
-- Description: Web Service Interface
-- =============================================
CREATE PROCEDURE [dbo].[spmd_HTTPRequest]
@URI varchar(2000) = '',
@methodName varchar(50) = '', -- POST, GET
@requestBody varchar(8000) = '', -- XML Document envelope
@SoapAction varchar(255),
@UserName nvarchar(100), -- Domain\UserName or UserName
@Password nvarchar(100),
@responseText varchar(8000) output
as
SET NOCOUNT ON
IF @methodName = ''
BEGIN
select FailPoint = 'Method Name must be set'
return
END
set @responseText = 'FAILED'
DECLARE @objectID int
DECLARE @hResult int
DECLARE @source varchar(255), @desc varchar(255)
EXEC @hResult = sp_OACreate 'MSXML2.ServerXMLHTTP.6.0', @objectID OUT
IF @hResult <> 0
BEGIN
EXEC sp_OAGetErrorInfo @objectID, @source OUT, @desc OUT
SELECT hResult = convert(varbinary(4), @hResult),
source = @source,
description = @desc,
FailPoint = 'Create failed',
MedthodName = @methodName
goto destroy
return
END
-- open the destination URI with Specified method
EXEC @hResult = sp_OAMethod @objectID, 'open', null, @methodName, @URI, 'false', @UserName, @Password
IF @hResult <> 0
BEGIN
EXEC sp_OAGetErrorInfo @objectID, @source OUT, @desc OUT
SELECT hResult = convert(varbinary(4), @hResult),
source = @source,
description = @desc,
FailPoint = 'Open failed',
MedthodName = @methodName
goto destroy
return
END
-- set request headers
EXEC @hResult = sp_OAMethod @objectID, 'setRequestHeader', null, 'Content-Type', 'text/xml;charset=UTF-8'
IF @hResult <> 0
BEGIN
EXEC sp_OAGetErrorInfo @objectID, @source OUT, @desc OUT
SELECT hResult = convert(varbinary(4), @hResult),
source = @source,
description = @desc,
FailPoint = 'SetRequestHeader failed',
MedthodName = @methodName
goto destroy
return
END
-- set soap action
EXEC @hResult = sp_OAMethod @objectID, 'setRequestHeader', null, 'SOAPAction', @SoapAction
IF @hResult <> 0
BEGIN
EXEC sp_OAGetErrorInfo @objectID, @source OUT, @desc OUT
SELECT hResult = convert(varbinary(4), @hResult),
source = @source,
description = @desc,
FailPoint = 'SetRequestHeader failed',
MedthodName = @methodName
goto destroy
return
END
declare @len int
set @len = len(@requestBody)
EXEC @hResult = sp_OAMethod @objectID, 'setRequestHeader', null, 'Content-Length', @len
IF @hResult <> 0
BEGIN
EXEC sp_OAGetErrorInfo @objectID, @source OUT, @desc OUT
SELECT hResult = convert(varbinary(4), @hResult),
source = @source,
description = @desc,
FailPoint = 'SetRequestHeader failed',
MedthodName = @methodName
goto destroy
return
END
-- send the request
EXEC @hresult = sp_OAMethod @objectID, 'send', NULL, @requestBody
IF @hResult <> 0
BEGIN
EXEC sp_OAGetErrorInfo @objectID, @source OUT, @desc OUT
SELECT hResult = convert(varbinary(4), @hResult),
source = @source,
description = @desc,
FailPoint = 'Send failed',
MedthodName = @methodName
goto destroy
return
END
declare @statusText varchar(1000), @status varchar(1000)
-- Get status text
exec sp_OAGetProperty @objectID, 'StatusText', @statusText out
exec sp_OAGetProperty @objectID, 'Status', @status out
select @status, @statusText, @methodName
-- Get response text
exec sp_OAGetProperty @objectID, 'responseText', @responseText out
IF @hResult <> 0
BEGIN
EXEC sp_OAGetErrorInfo @objectID, @source OUT, @desc OUT
SELECT hResult = convert(varbinary(4), @hResult),
source = @source,
description = @desc,
FailPoint = 'ResponseText failed',
MedthodName = @methodName
goto destroy
return
END
destroy:
exec sp_OADestroy @objectID
SET NOCOUNT OFF
The underlined portion is the one that gives error, reported below.
"Msxml6.dll 0x80070057 The parameter is incorrect. Send failed POST"
Previously the SP used MSXML3.dll and also with that it gives the same problem.
I can't understand what the wrong parameter is.
Even because, as mentioned at the beginning, everything works fine on windows server 2008R2 and Windows Server 2003
Some ideas?

Hello,
We have built a dll via CLR on the database.
Below is the code.
If you want to send the file SOAP.dll. Give me an e-mail ..
USE MydatabaseGO
/****** Object: SqlAssembly [SOAP] Script Date: 03/05/2014 12:59:14 ******/
CREATE ASSEMBLY [SOAP]
AUTHORIZATION [dbo]
FROM MyPath\SOAP.dll
WITH PERMISSION_SET = EXTERNAL_ACCESS
GO
USE Mydatabase
GO
/****** Object: StoredProcedure [dbo].[spmd_HTTPRequest3] Script Date: 03/05/2014 12:53:32 ******/
CREATE PROCEDURE [dbo].[spmd_HTTPRequest3]
@URI [nvarchar](4000),
@methodName [nvarchar](4000),
@requestBody [nvarchar](4000),
@SoapAction [nvarchar](4000),
@UserName [nvarchar](4000),
@Password [nvarchar](4000),
@responseText [nvarchar](4000) OUTPUT
WITH EXECUTE AS CALLER
AS
EXTERNAL NAME [SOAP].[StoredProcedures].[spmd_HTTPRequest3]
GO
Now call the new SP called spmd_HTTPRequest3
By..

Hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem

hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
thanks for any reply.
Rosone

It is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
Check this in a different browser or access site in a differ OS.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

User Profile Disks with Windows Search

We have 2 RDS Servers (2012R2) and work With User Profile Disks
We use outlook cached mode (Outlook 2013 SP1) because the link to our head office is to slow
The problem is that the outlook search isn't working properly.
Every time the users logs on, search indexes are recreated
This proces never finishes because the server is under a constant load, therefore search never works as it should.
In eventvwr, we see this error alot:
Crawl could not be completed on content source <winrt://{S-1-5-21-xxxxxxxxxxxx}/>.
Context: Application, SystemIndex Catalog
Details:
The parameter is incorrect. (HRESULT : 0x80070057) (0x80070057)

Hi,
I have been searching for a solution for this issue in a client environment for a few months now.
Our environment is similar, RDS on Server 2012 R2 with Outlook in cached mode and the search service enabled However we are using Outlook 2010.
I disagree that the issue should be marked as resolved.
I believe you are experiencing the same issue as I and these 2 other people:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/e6d4e3e6-37ef-488c-86ac-d135e3f2353f/windows-search-index-and-user-profile-disks?forum=winserverTS
https://social.technet.microsoft.com/Forums/windowsserver/en-US/dc6328e9-96dc-4377-a23f-0fb7020e5daa/indexing-user-profile-disk-on-a-file-server-or-on-the-rdsh-server?forum=winserverTS
When users logon, the search service begins indexing and if the user is logged on long enough it completes user files, including the OST.
However when the user logs off, Windows deletes the search data as it believes the profile has been deleted. The profile has not been deleted, the profile disk (UPD) has merely been dismounted.
We really need a resolution for this, this shouldn't be happening. The profiles are not getting deleted and the index is getting deleted for the wrong reason.
Furthermore if this issue is not fixable, then it will delay our push to move clients to Office 365. If we cannot index offline email on RDS, then we simply cannot move our Exchange servers offsite.
Unfortunately no resolution has been provided from Microsoft as yet to any of these 3 people who requested support.
Can anyone else shed any light on this?
Thanks, Nigel

Need help with roaming user profiles, home folder on server - symptoms after Windows reinstall on workstation

Hello. I have deployed roaming user profiles in our home office. We are using Windows Server 2012 on our datacenter computer, which has a partition with all our home directories. All was working beautifully for quite some time.
I re-installed Windows 8.1 Pro on my laptop. I am able to log in to my profile from the new installation.
The problem that has started happening seems to be some sort of permission problem with my home directory, but I am not sure how to go about diagnosing it. I haven't changed anything in the policies or remote profiles.
The symptoms:
When I try to run an installation program from my documents/downloads/desktop (remote) folders, UAC asks for the administrative credentials as expected, and then I am asked to enter my user credentials. If I do so, I sometimes get a message about duplicate
connections to a share, and the installation program does not execute. "Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or
shared resource and try again." I am confused, because I am entering credentials for the same user name as the one I am logged in with.
To work around, I have to copy the executable to a folder on my workstation hard drive and run it from there.
Another symptom is when I download anything from the internet, chrome will reflect a "Failed - Download error" message with the download. If I re-attempt the same download several times, eventually it will succeed. This appears to be due to my
downloads folder being on the remote computer.
I am looking for any guidance on how to remedy these symptoms. I suspect there must be a setting I have forgotten to change in the local computer, because nothing has changed on the server since it was operating properly.
Thank you for your time.

Hi Exintrovert,
Thanks for posting here.
According to your discription above, you can check the microsoft artical as below:
https://support.microsoft.com/en-us/kb/938120/
Would you please have a try the work around in the artical and then let us know the update?
Looking forward to your feedback.
Best Regards,
Elaine
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

App-V 5 SP2 as RemoteApps and User Profile Disks with Error Error 0xc0000142

App-V packages are published as RemoteApps and User Profile Disks are used.
Similar to the problem posted
here .
Some packages are running without an error (e.g. Acrobat Reader) and some other (e.g. Notepad++) could not launch.
The result is "The application was unable to start correctly (0xc0000142). Click OK to close the Program.
If UPD is disabled, packages running before gets now the error and the non-launching apps are running now.
The post by Steve TH "App-V 5.0: On these 0xc0000142 errors and where they are coming from" give
me an idea what´s may going on. But could not find anything related in the logs.
An answer was set as solution in this
post but it´s not clear for me, how to setup the Sequencer.
8.3 is enabled on all VMs.
How to setup the sequencer and the UPD configuration to run this scenario without the error?
/vkleinerde

Hello,
First thought is just to make a copy of the prod RDS-server, sequence on it and then see how it goes?
Nicke Källén | The Knack| Twitter:
@Znackattack

WinX missing for domain users (Windows Server 2012/R2, Windows 8/8.1)

Hi,
I recently created a discussion about a Winx (Right Click) issue that I have in my environment. For windows servers 2012/2012 R2 and windows 8/8.1, I don't have the right click menu.
I don't use roaming profiles. The workaround is to manually copy the Winx folder for each user who log on but I would like to understand why it doesn't work.
Here is the previous discussion I created.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4e80c369-242f-47ba-bd22-aafb9b0a6072/winx-missing-for-domain-users?forum=winserverManagement#ab6deeb2-cbcd-4147-a871-4c76d4cb37af
I really appreciate your help.
Thanks

Hi,
I could not reproduce the issue.
When i log in the Windows Server 2012 with domain user, the WinX folder already exists ans the Right Click is ok.
So you could create a new domain user to check the result.
Regards.
Vivian Wang

User Profile Disks with Windows Server 2012 and Windows 8 VDI

Similar Messages

Maybe you are looking for