User Profile email address not updated on Site Collection User Information

Hi All,
Ok here we go....SharePoint 2007 with SSP profile sync not enabled, however I have a few profiles I need to update (email address).  This has been completed by editing the user profile in SSP, but when viewing the information via Site Collection >
People & Groups > User Information "Work E-mail" is still showing the old one.
All alerts are still being sent to the old email address, SSP DB UserProfile_Full shows the new email address as per SSP.
Anyone know where else user profile emails are stored which is used by Exchange?
Many Thanks, Roger

As per the following post from GuYuming
http://social.technet.microsoft.com/Forums/sharepoint/en-US/319d5b0e-336a-4815-9ee5-5d1685db867f/how-to-send-sharepoint-alerts-to-users-on-different-domain?forum=sharepointadminlegacy
After the email address in SharePoint user profile is updated to [email protected], you have to wait until
they are synchronized into the user information list in SharePoint site collections so that alert can be sent to that address. For detail, please read http://vspug.com/mirjam/2009/06/17/user-profiles-and-the-user-information-list-or-userinfo-table/ and http://blogs.technet.com/paulpaa/archive/2009/10/01/user-profile-information-not-updated-on-site-collection-s-people-and-group.aspx
--Cheers

Similar Messages

  • Error in Windows 7: User Profile Service was not logged on. The user and administra​torprofile

    Error in Windows 7: User Profile Service was not logged on. The user profile can not be loaded. Administrator profile and the code does not work. What do I do?
    HP G5384sc desktop pc

    Hello
    Unfortunately I did not manage to fix my computer yet. My printer is broken so I bought a new one, but since I do not have administrator rights, I can not connect the new printer, so I have to write all-installing notes down with pencil and simultaneously translate them into Danish so it is a very slow process. I'll tell you if it succeeds, otherwise there is of course the primitive way to buy a new computer, but it's the same as giving up. Not yet.
    Until now, many thanks for the good suggestions.
    Kind regards
    Birgeres

  • E-BUSINESS - OBIEE Email addresses not updating correctly

    I am using out of the box configuration from E-Business to OBIEE, we currently have an issue where the Email addresses are not being updated correctly. When email addresses change in EBS due to a person getting married etc. I thought if i put in a headcount at the end of the report in the presentation layer this may fix the issue but it is picking up the old email address. What I need is the latest email address listed in all reports, Is this a known issue from EBS - OBIEE or can this be fixed via ETL or at RPD level?

    Are you reporting directly off EBS tables or are you using BI Apps and have an analytics warehouse populated by ETL routines ?
    Two reasons spring to mind why your not seeing your up to date data :
    the warehouse has not been updated from the source system (yet), perform an ETL refresh to load the new data into the warehouse.
    or
    BI Cache is on, you need to clear the cache to view the most recent data, the BI Server does not know when the source tables change (without use of an Event Polling table)
    to clear the cache : Administration tool (online ) -> Manage -> Cache -> Highlight all and hit delete.
    Hope this helps,
    Alastair

  • Email address not updating after publishing

    Hi-
    My wife has created her website and published it using Easy iWeb Publisher. Now that the site is up, we realize she is pointing to an invalid email address- it looks correct on her site, but when we click on it, it attempts to use an old email address we were testing with. We've tried to remove all traces of the test email address in iWeb- we deleted it completely off the contact info page, saved the changes, and added it back before republishing, but we're getting the same result. We can no longer find any traces of the test email address in the iWeb Contact page, but that's what the email address resolves to when we click on it.
    Any ideas how to fix this?
    Many thanks- Eric

    Welcome to the Apple Discussions. Try the following:
    Try the following:
    1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder.
    2 - go to your User/Library/Caches/com.apple.iWeb folder and delete the contents.
    3 - reboot.
    4 - launch iWeb, republish to a folder on the hard drive and locally check the email again.
    OT

  • Some of the users Profile photo is not showing in sharepoint team sites

    Some of the users Profile photo is not showing in the list of SharePoint team site.
    In the people picker their picture is grayed out but if you click on their name it will direct you to their mysite and the picture is there.
    Can some body help on this.

    Try running:
    stsadm -o sync -deleteolddatabases 0
    Then, run the timer job named similar to "User Profile Service Application - User Profile to SharePoint Full Synchronization". Wait for it to complete, then re-check the profile photo on the SharePoint site.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • After I converted to OS5, the iCloud user name on my iPad is set to my email address, not my iCloud User ID.  How can I change it.  It's correct on my iPhone and MacBook.

    After I converted to iOS5, the iCloud user name on my iPad is set to my email address, not my iCloud User ID.  How can I change it.  It's correct on my iPhone and MacBook.

    You'll need to save the documents first from the incorrect iCloud account, sign out then sign in to the correct iCloud account and upload the documents to that account.

  • Hi All,  I am not able to change the email address to update my secret question and answer.  Instead it directs the email to my work address where I cannot access now.  Thoughts?

    Hi All,  I am not able to change the email address to update my secret question and answer.  Instead it directs the email to my work address where I cannot access now.  Thoughts?

    Call Apple Care and ask for the Account Security Team. They can assist you with your issue.

  • I have a new email address and was successful in changing that information on line but my phone and iPad does not recognize the new address and I cannot update anything. It also does not accept the password associated with the old email address/Apple ID

    I have a new email address and was successful in changing the information online but cannot change it on my iPhone 4S or iPad. When I try to fix the problem it requires me to create a new password and now I can't remember that either.

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  When you do this you may find that the password for your old ID isn't accepted.  If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

    When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

    I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

  • Email address not showing up in TO box of outlook when a job is run from OBIEE agent

    HI Everone,
    I am running an Agent in OBIEE 11g(11.1.1.5), we are sending report's output as excel/pdf. Jobs are running fine, but we don't see user's email address in TO box of their outlook(inbox). Is there any settings which I can enable, so that agent can show user's email address upon delviery, right now TO box of inbox is blank.
    Thanks for help in advance.

    Even I don't think its an version issue. But, at the same time, I am not sure how to get it(email address in TO box of outlook). Just wondering, is this setting done in OBIEE or Outlook

  • I recently changed my email address and updated my password.  However, when I connect my iPhone 4 it defaults to my old email address which is no longer valid.  How do I get my phone to recognize my updated email address?

    I recently changed my email address and updated my password.  However, when I connect my iPhone 4 it defaults to my old email address which is no longer valid.  How do I get my phone to recognize my updated email address and how do I now change the iPhone 4 to recognize the new address?  I wish to delete all reference to the old address.  All help would be appreciated.

    Hi.
    Here is a procedure that should help.
    1. Go to "Settings"
    2. Go to "Mail, Contacts, Calendars"
    3. Click the account you don't want anymore
    4. Go to the bottom and click "Delete Account"
    5. Confirm the deletion
    6. Go back to "Mail, Contacts, Calendars" (if you're not there already)
    7. Add your new account

  • Apple ID updated to email address, cannot update apps!

    I had to updated my apple ID to an email address ( as required) when I updated my OS on my Mac. All my apps were purchased with the previous ID so now I cannot seem to updated them as my previous ID does not exist. What do I do?

    Hey confused82,
    Great question. When you update your Apple ID to a new primary email address, you'll want to update the login information across all of your devices. You simply want to sign out of Settings > iTunes & App Store, and back in with the new email address:
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311
    (do the same for all services, including iMessage, FaceTime, iCloud, etc across all devices)
    After doing so, you'll be able to update applications with your new email address. If you are prompted for the old Apple ID, simple enter your current password.
    Please note that this only works for accounts where the email address was updated, not for entirely new accounts.
    Additional information:
    Apple ID: Changing the email address you use for your Apple ID
    http://support.apple.com/kb/HT5621
    Cheers,
    Matt M.

  • Email Address not visible for output device MAIL in created batch job

    Issue in ECC6.0: Email Address not visible to display/change for output device MAIL in print parameter of each step in the created batch job.
    User wants to periodically receive report file via send to his email, so I create the batch job running report and send the report in pdf file to his email.
    Detail in the batch job
    1) In print parameter screen of the step in the batch job
       -Using output device MAIL (output type ZPDF1)
       -inputting email address of receiver in the EMAIL ADDRESS field
    2) After the batch job was saved, I tried to display/change the field EMAIL ADDRESS via Tx. SM37, but this field is invisible. The field can not be displayed or changed anymore. I also tried in SM36, but it is for creating new batch job, not changing the existing batch job.
    4) User receives email with pdf file from the batch job.
    How to change/display the email address of the receiver in the created batch job?
    Note that we just changed to use SAP ECC6 from SAP 4.6c. In SAP 4.6c, we can change/display the
    Email Address Field via Tx. SM37.
    Pls kindly suggest, thank you very much in advance.

    Hi Srirompoti,
    After saving the job if the job has not started then you can follow the below steps to change the Email address.
    1. View the job from Txn SM37.
    2. check the check box for your job that you want to change and goto menu path "Job->change
    3. in the next screen goto "Edit->steps." or press "F6" key
    4. place the coursor on the job and goto menu path "Step->change->print specifications.
    5. here you can change the email address.
    If you are not able change the data then you might not have authorization.

  • User Profile Services:How get to know how many user are using my site.

    Hi,
    User Profile Services:How get to know how many user are using my site.
    Recently i have done migration sharepoint 2010 to sharepoint 2013,I did not migrate USer profile services because less user are using user profile here,but i need to know how many few uer are using my site for data store.
    Is any why we can get to know  user name who are using my site document library and other things.
    Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
    |
    | Twitter

    Fallowing command shows only count of my site user ,I need to know how many upload data on my site
    Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
    |
    | Twitter

  • Dreamweaver CC - In App Next to Email Address, Apply Updates?

    I'm working in Dreamweaver CC on Mac OS X Yosemite and when I go to Dreamweaver ->email address ->Apply Updates is there. Does this mean I need to apply the updates to the program? I thought that was accomplished when the "Cloud" icon on the desktop stated there was an update. Am I wrong? Any help would be greatly appreciated.
    Thanks,
    John

    Finally figured this one out.
    It happens when oracle.install.db.config.starterdb.type is set to TRANSACTION_PROCESSING.
    Apparently "TRANSACTION_PROCESSING" and "GENERAL_PURPOSE/TRANSACTION_PROCESSING" are not valid types, even though the response template file and the response file generated via OUI list the following:
    Response template file included in the database package:
    +#------------------------------------------------------------------------------+
    +# Specify the type of database to create.+
    +# It can be one of the following:+
    +# - GENERAL_PURPOSE/TRANSACTION_PROCESSING+
    +# - DATA_WAREHOUSE+
    +#------------------------------------------------------------------------------+
    Response file generated by OUI during an interactive install:
    +#-------------------------------------------------------------------------------+
    +# One of the following+
    +# - GENERAL_PURPOSE+
    +# - TRANSACTION_PROCESSING+
    +# - DATAWAREHOUSE+
    +#-------------------------------------------------------------------------------+
    In order to install in silent mode I used the following settings:
    oracle.install.db.config.starterdb.type=GENERAL_PURPOSE
    oracle.install.db.config.starterdb.dbcontrol.enableEmailNotification=false
    oracle.install.db.config.starterdb.dbcontrol.emailAddress=
    oracle.install.db.config.starterdb.dbcontrol.SMTPServer=
    MYORACLESUPPORT_USERNAME=
    MYORACLESUPPORT_PASSWORD=
    SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
    DECLINE_SECURITY_UPDATES=true

Maybe you are looking for

  • About workflow problem in 4.6C for PR

    Hello Expert: i met a quesiton about the workflow for PR in 4.6C. the detail is as following. The requestor created a PR for waiting for approve, there are 3 approvor to handle the PR. maybe the second approvor modified the quantity or amount of the

  • How to load a partial hierarchy

    EPM 10 NW While loading 0GL_ACCOUNT not all master data in BW is relevant for my planning in BPC hence i need to load only one branch of the hierarchy. As far I can tell we can only filter by an attribute when you are loading from BW INFOOBJECT using

  • How to stream music to car

    hi, i am trying to find out if i can stream music from my iphone4 via bluetooth to my car stereo or car speakers. the phone pairs up and works ok for calls

  • How to reset to default setting pse8?

    how to reset to default setting pse8?

  • Verizon email support and customer service - simply horrible

    After spending a frustrating and annoying morning trying to get Verizon Technical Support to help fix a problem with blocked access to Webmail, I notice on this forum that mine is not the only problem,.....except I have not seen the same issue denote